Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sulfur dioxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Distribution of Hydrogen Peroxide, Carbon Dioxide, and Sulfuric Acid in Europa's Icy Crust

Galileo's Near Infrared Mapping Spectrometer (NIMS) detected hydrogen peroxide, carbon dioxide and a hydrated material on Europa's surface, the latter interpreted as hydrated sulfuric acid (H2SO4*nH2O) or hydrated salts. Related compounds are molecular oxygen, sulfur dioxide, and two chromophores, one that is dark in the ultraviolet(UV) and concentrated on the trailing side, the other brighter in the UV and preferentially distributed in the leading hemisphere. The UV-dark material has been suggested to be sulfur.

Carlson, R. W.↗
NASA NTRS1980

Studies of thermochemical water-splitting cycles

Higher temperatures and more isothermal heat profiles of solar heat sources are developed. The metal oxide metal sulfate class of cycles were suited for solar heat sources. Electrochemical oxidation of SO2 and thermochemical reactions are presented. Electrolytic oxidation of sulfur dioxide in dilute sulfuric acid solutions were appropriate for metal oxide metal sulfate cycles. The cell voltage at workable current densities required for the oxidation of SO2 was critical to the efficient operation of any metal oxide metal sulfate cycle. A sulfur dioxide depolarized electrolysis cell for the splitting of water via optimization of the anode reaction is discussed. Sulfuric acid concentrations of 30 to 35 weight percent are preferred. Platinized platinum or smooth platinum gave the best anode kinetics at a given potential of the five materials examined.

Remick, R. J.↗
NASA NTRS1972

Biological cycling of atmospheric trace gases

A detailed critical review was conducted of present knowledge of the influence of biological processes on the cycling of selected atmospheric gas constituents--methane, carbon monoxide, and gaseous compounds of nitrogen (nitrous oxide, ammonia, nitric oxide, and nitrogen dioxide) and sulfur (hydrogen sulfide and sulfur dioxide). The identification was included of biological and other sources of each gas, a survey of abundance measurements reported in the literature, and a review of the atmospheric fate of each contituent. Information is provided on which to base conclusions regarding the importance of biological processes on the atmospheric distribution and surface-atmosphere exchange of each constituent, and a basis for estimating the adequacy of present knowledge of these factors. A preliminary analysis was conducted of the feasibility of monitoring the biologically influenced temporal and spatial variations in abundance of these gases in the atmosphere from satellites.

Hitchcock, D. R.↗
NASA NTRS1973

Correlation interferometric measurement of trace species in the atmosphere.

Two correlation interferometers, a breadboard model and an engineering model, have been designed, constructed, and tested for the measurement of selected atmospheric trace species. Test results showed that errors of less than 10% are attainable for atmospheric amounts of carbon monoxide and methane measured at 2.3 microns. Based on these results a program has been undertaken to determine the feasibility of measuring other trace species by correlation interferometry. It shown that in addition to carbon monoxide and methane, carbon dioxide, water vapor, ammonia, nitric oxide, nitrous oxide, nitrogen dioxide, and sulfur dioxide can also be accurately measured with this instrument.

Goldstein, H. W.↗
NASA NTRS1974

Absorption cross sections of stratospheric molecules

Two classes of molecular species must be considered in a calculation of photochemical rates in the stratosphere. The first class consists of molecular oxygen and ozone, while the second class contains the remainder of the minor constituents. If accurate values of the transmitted fluxes are required at large optical depths, the cross sections for molecular oxygen and ozone must be known to within a few per cent at least. On the other hand, the photochemical rates for the minor species are given simply by the relevant cross sections. A review of published cross sections is presented, giving attention to molecular oxygen, ozone, nitric oxide, nitrogen dioxide, nitrous oxide, nitric acid, ammonia, water vapor, hydrogen peroxide, carbon monoxide, carbon dioxide, and sulfur dioxide.

Hudson, R. D.↗
NASA NTRS2001

Tropospheric Formaldehyde Measurements from the ESA GOME Instrument

The Global Ozone Monitoring Experiment (GOME) was launched on the European Space Agency's ERS-2 satellite on April 20, 1995. GOME measures the Earth's atmosphere in the nadir geometry, using a set of spectrometers that cover the UV and visible (240-790 nm) at moderate resolution (0.2 nm in the UV, 0.4 nm in the visible), employing silicon diode array detectors. GOME takes some 30,000 spectra per day, obtaining full global coverage in three days. We directly fit GOME radiance spectra using nonlinear least-squares analysis to obtain column amounts of several trace species with significant tropospheric concentrations, including ozone (O3), nitrogen dioxide (NO2), sulfur dioxide (SO2), and formaldehyde (HCHO). Measurements of HCHO due to biogenic activity in the troposphere are presented here.

Chance, K.↗
NASA NTRS1999

Sulfuric acid on Europa and the radiolytic sulfur cycle

A comparison of laboratory spectra with Galileo data indicates that hydrated sulfuric acid is present and is a major component of Europa's surface. In addition, this moon's visually dark surface material, which spatially correlates with the sulfuric acid concentration, is identified as radiolytically altered sulfur polymers. Radiolysis of the surface by magnetospheric plasma bombardment continuously cycles sulfur between three forms: sulfuric acid, sulfur dioxide, and sulfur polymers, with sulfuric acid being about 50 times as abundant as the other forms. Enhanced sulfuric acid concentrations are found in Europa's geologically young terrains, suggesting that low-temperature, liquid sulfuric acid may influence geological processes.

unmanned↗
NASA NTRS2014

Satellite Monitoring Over the Canadian Oil Sands: Highlights from Aura OMI and TES

Satellite remote sensing provides a unique perspective for air quality monitoring in and around the Canadian Oil Sands as a result of its spatial and temporal coverage. Presented are Aura satellite observations of key pollutants including nitrogen dioxide (NO2), sulfur dioxide (SO2), carbon monoxide (CO), ammonia (NH3), methanol (CH3OH), and formic acid (HCOOH) over the Canadian Oil Sands. Some of the highlights include: (i) the evolution of NO2 and SO2 from the Ozone Monitoring Instrument (OMI), including comparisons with other nearby sources, (ii) two years of ammonia, carbon monoxide, methanol, and formic acid observations from 240 km North-South Tropospheric Emission Spectrometer (TES) transects through the oils sands, and (iii) preliminary insights into emissions derived from these observations.

NO2↗
NASA NTRS2016

Tropospheric Emissions: Monitoring of Pollution (TEMPO)

TEMPO (Tropospheric Emissions: Monitoring of Pollution) was selected in 2012 by NASA as the first Earth Venture Instrument, for launch between 2018 and 2021. It will measure atmospheric pollution for greater North America from space using ultraviolet and visible spectroscopy. TEMPO observes from Mexico City, Cuba, and the Bahamas to the Canadian oil sands, and from the Atlantic to the Pacific, hourly and at high spatial resolution (approximately 2.1 kilometers N/S by 4.4 kilometers E/W at 36.5 degrees N, 100 degrees W). TEMPO provides a tropospheric measurement suite that includes the key elements of tropospheric air pollution chemistry, as well as contributing to carbon cycle knowledge. Measurements are made hourly from geostationary (GEO) orbit, to capture the high variability present in the diurnal cycle of emissions and chemistry that are unobservable from current low-Earth orbit (LEO) satellites that measure once per day. The small product spatial footprint resolves pollution sources at sub-urban scale. Together, this temporal and spatial resolution improves emission inventories, monitors population exposure, and enables effective emission-control strategies. TEMPO takes advantage of a commercial GEO host spacecraft to provide a modest cost mission that measures the spectra required to retrieve ozone (O3), nitrogen dioxide (NO2), sulfur dioxide (SO2), formaldehyde (H2CO), glyoxal (C2H2O2), bromine monoxide (BrO), IO (iodine monoxide),water vapor, aerosols, cloud parameters, ultraviolet radiation, and foliage properties. TEMPO thus measures the major elements, directly or by proxy, in the tropospheric O3 chemistry cycle. Multi-spectral observations provide sensitivity to O3 in the lowermost troposphere, substantially reducing uncertainty in air quality predictions. TEMPO quantifies and tracks the evolution of aerosol loading. It provides these near-real-time air quality products that will be made publicly available. TEMPO will launch at a prime time to be the North American component of the global geostationary constellation of pollution monitoring together with the European Sentinel-4 (S4) and Korean Geostationary Environment Monitoring Spectrometer (GEMS) instruments.

tropospheric measurement suite↗
NASA NTRSDate not supplied

Characterizing the Effects of Thermal Profile and Gas Environment on the Heat Treatment of JSC-1A Lunar Simulant Using Combined Thermogravimetry and Mass Spectroscopy

As NASA strives towards a long duration presence on the Moon, it has become increasingly important to learn how to better utilize resources from the lunar surface for everything from habitats, vehicle infrastructure, and chemical extraction. To that end, a variety of lunar simulants have been sourced from terrestrially available volcanic minerals and glass as Apollo regolith is a finite resource unavailable for experimentation needing large masses. However, while mineralogy and chemical composition can approach that of lunar material in these simulants, there are still distinct non-lunar phases such as hydrates, carbonates, sulfates, and clays that can cause simulants to behave distinctly non-lunar in a variety of processing conditions that would ideally be applied to lunar material. Notably, severe glassy bubbling has been documented in a variety of vacuum sintering experiments on JSC-1A lunar Maria simulant heated via microwaves. The origins of this outgassing have not been well understood, but are normally attributed to the decomposition of non-lunar contaminates intrinsic to virtually all terrestrially sourced simulants. As such, a series of controlled environmental tests were performed to ascertain the origins of the high temperature outgassing and to develop heat treatments that can drive JSC-1A closer to lunar composition and behavior. It was found that in JSC-1A that distinct gas evolutions of water, carbon dioxide, and sulfur dioxide occur in both inert gas and vacuum. Additionally, the presence of hydrogen during heat treatments was shown to dramatically change gas evolutions, leading to distinctly more lunar-like composition and behavior from JSC-1A simulant.

sinter↗
NASA NTRSDate not supplied

Characterizing the Effects of Thermal Profile and Gas Environment on the Heat Treatment of JSC-1A Lunar Simulant Using Combined Thermogravimetry and Mass Spectroscopy

As NASA strives towards a long duration presence on the Moon, it has become increasingly important to learn how to better utilize resources from the lunar surface for everything from habitats, vehicle infrastructure, and chemical extraction. To that end, a variety of lunar simulants have been sourced from terrestrially available volcanic minerals and glass as Apollo regolith is a finite resource unavailable for experimentation needing large masses. However, while mineralogy and chemical composition can approach that of lunar material in these simulants, there are still distinct non-lunar phases such as hydrates, carbonates, sulfates, and clays that can cause simulants to behave distinctly non-lunar in a variety of processing conditions that would ideally be applied to lunar material. Notably, severe glassy bubbling has been documented in a variety of vacuum sintering experiments on JSC-1A lunar Maria simulant heated via microwaves. The origins of this outgassing have not been well understood, but are normally attributed to the decomposition of non-lunar contaminates intrinsic to virtually all terrestrially sourced simulants. As such, a series of controlled environmental tests were performed to ascertain the origins of the high temperature outgassing and to develop heat treatments that can drive JSC-1A closer to lunar composition and behavior. It was found that in JSC-1A that distinct gas evolutions of water, carbon dioxide, and sulfur dioxide occur in both inert gas and vacuum. Additionally, the presence of hydrogen during heat treatments was shown to dramatically change gas evolutions, leading to distinctly more lunar-like composition and behavior from JSC-1A simulant.

sinter↗
NASA NTRSDate not supplied

Joint Assimilation of CO, O3, NO2, SO2, PM, AOD, NH4, PAN, and HNO3 in Support of the Tropospheric Regional Atmospheric Composition and Emissions Reanalysis (2005 - 2024) (TRACER-I)

NASA Ames Research Center is collaborating with the NOAA Chemical Systems Laboratory (NOAA/CSL), the NASA Jet Propulsion Laboratory (JPL), the NASA Goddard Modeling and Assimilation Office, and the National Center for Atmospheric Research to prepare a 20-year Tropospheric Regional Atmospheric Composition and Emissions Reanalysis (2005 – 2024) (TRACER-I) for the continental United States during the summer ozone (O3) and wildfire seasons (April to October). TRACER-I will be a regional complement to JPL’s global Tropospheric Chemistry Reanalyses II and III. We will use WRF-Chem/DART with NOAA/CSL’s WRF-Chem setup at 12 km x 12 km horizontal resolution, 51 vertical levels, and 30 ensemble members. We will assimilate: (i) conventional meteorological observations; (ii) EPA’s Air Quality System in situ measurements of carbon monoxide (CO), O3, nitrogen dioxide (NO2), sulfur dioxide (SO2), particulate matter (PM) with diameters less than 10 µm (PM10), and PM with diameters less than 2.5 µm (PM2.5); and (iii) MOPITT, MODIS, OMI, TROPOMI, GOME-2a, MLS, TES, SCIAMACHY, CrIS, and TEMPO total/partial column and/or profile retrievals of CO, O3, NO2, SO2, aerosol optical depth (AOD), formaldehyde (HCHO), ammonia (NH4), peroxyacetyl nitrate (PAN), and/or nitric acid (HNO3) with 3-hr cycling. We will present an overview of this project, its status, and available results (likely the analysis of sensitivity experiment results from the assimilation/emissions estimation system).

data assimilation↗
NASA NTRSDate not supplied

The NASA TEMPO Mission: Hourly Daytime Air Pollution Observations for Enhanced Health and Air Quality Applications

The Tropospheric Emissions: Monitoring of Pollution (TEMPO) mission was launched into Geostationary Earth Orbit (GEO) to 91°W longitude on April 7, 2023, and had a successful 3-day First Light period starting July 31 with TEMPO making its first hourly daytime scans across the TEMPO Field of Regard (FoR) covering greater North America on August 2. TEMPO will provide hourly daytime observations of aerosols and trace gases, including criteria pollutants of nitrogen dioxide (NO2), sulfur dioxide (SO2), and ozone (O3), at high spatial resolution (e.g., 2.0 x 4.75 km2) across the FoR. The hyperspectral ultraviolet-to-visible measurements from the TEMPO imaging grating spectrometer will enable an O3 profile product capable of monitoring the daytime diurnal evolution of O3 pollution in the planetary boundary layer and assessing related health impacts. The non-standard or special scan operations of TEMPO at sub-hourly frequency (e.g., 2-10 minutes) over selected slices of the FoR will further enhance air quality monitoring capabilities during disasters (e.g., wildfires, volcanic eruptions, dust storms, industrial accidents) and other episodic events for better understanding emission sources and the evolution of harmful air pollutants. A large diversity of stakeholders and end-users have been engaged in the TEMPO Early Adopters Program, supported by the NASA Applied Sciences Program, which aims to enhance health and air quality applications and maximize the societal benefit of TEMPO data. Key outcomes from the Early Adopters Program include enhanced knowledge and preparation for using TEMPO data, tailoring the data dissemination and visualization tools for TEMPO based on user needs, and broadening the health and air quality applications facet of the mission. This presentation will provide the latest TEMPO mission and Early Adopters Program updates, insight into the health and air quality applications enabled through TEMPO data, and showcase the First Light NO2 imagery and provisional data from the mission.

Remote Sensing↗
NASA NTRS2024

Isotopic Evidence of Long-Lived Volcanism on Io

Jupiter’s moon Io hosts extensive volcanism, driven by tidal heating. The isotopic composition of Io’s inventory of volatile chemical elements, including sulfur and chlorine, reflects its outgassing and mass-loss history and thus records information about its evolution. We used submillimeter observations of Io’s atmosphere to measure sulfur isotopes in gaseous sulfur dioxide and sulfur monoxide, and chlorine isotopes in gaseous sodium chloride and potassium chloride. We find 34S/32S = 0.0595 ± 0.0038 (equivalent to δ34S = +347 ± 86‰), which is highly enriched compared to average Solar System values and indicates that Io has lost 94 to 99% of its available sulfur. Our measurement of 37Cl/35Cl = 0.403 ± 0.028 (δ37Cl = +263 ± 88‰) shows that chlorine is similarly enriched. These results indicate that Io has been volcanically active for most (or all) of its history, with potentially higher outgassing and mass-loss rates at earlier times.

Katherine De Kleer↗
NASA NTRSDate not supplied

Enhancing Air Quality Applications in the Hindu Kush-Himalayan Region Using Satellite, Model, and Machine Learning Techniques

Air pollution in the Hindu Kush Himalayan (HKH) region of South Asia is a severe issue, as increases in emissions over the past two decades have degraded air quality (AQ) across the region, which poses major threats to human health, the ecosystem, climate, and agriculture. A diversity of anthropogenic and natural emission sources including transportation, power plants, industries, open biomass burning of crop residue, forest fires, cooking and heating fires, and dust storms contribute to unhealthy AQ and transboundary pollution issues in the region. Further complicating matters is the importance of meteorology and terrain on AQ, especially in the Kathmandu Valley where extreme haze episodes frequently develop from the atmospherically stable weather conditions during the winter monsoon. This study uses state-of-the-art satellite observations and modeling capabilities in conjunction with machine learning techniques to develop a comprehensive toolkit for enhancing AQ monitoring and forecasting in HKH. The toolkit incorporates new generation satellite observations from the TROPOspheric Monitoring Instrument (TROPOMI), Geostationary Environment Monitoring Spectrometer (GEMS), and Advanced Meteorological Imager (AMI), which provide unprecedented resolution on aerosols and trace gases, including nitrogen dioxide, formaldehyde, sulfur dioxide, carbon monoxide, and ozone, and aerosol optical depth. Value-added products, such as level 4 PM2.5 products, are developed from the suite of satellite observations to further improve AQ monitoring capabilities in the region. The satellite products are also used to assimilate a high-resolution chemical transport model tailored for the HKH region, which is providing daily, 54-hour AQ forecasts with horizontal grid spacings of 12- and 4-km. This presentation will provide an overview of the suite of satellite- and model-based products in the AQ toolkit and application and performance of the toolkit for AQ monitoring and forecasting in HKH.

Forecasting↗
NASA NTRS1987

Sulfur-oxygen processes on Io

Laboratory studies of irradiated sulfur dioxide frost have found that sulfur trioxide should be formed as a consequence of the irradiation process. The spectral reflectance of solid sulfur trioxide was measured in the laboratory and it was found that the compound has strong absorption features at 3.37 and 3.70 microns. These features are not present in the spectral geometric albedo of Io. This is interpreted as an indication that sulfur trioxide may exist in such limited abundance that it is undetectable in disk averaged spectrophotometry. It is suggested that the Near-Infrared Mapping Spectrometer on the Galileo spacecraft should be able to identify condensed sulfur trioxide on Io particularly in regions bordering the sulfur dioxide deposits. The presence of elemental sulfur on Io's surface has been questioned on several grounds, most notably the suggested production process (quenched molten sulfur extrusions) and the effect of radiation (particularly X-rays) on some of the allotropes. Mixtures of sulfur allotropes were produced in the laboratory by quenching molten sulfur and it was found that the spectra indicate the presence of certain red-colored allotropes which are preserved upon quenching. The color of the sulfur glass produced is redder when the temperature of the original melt is higher. This is consistent with the suggestion that Io's spectral geometric albedo can be partly explained by the presence of quenched sulfur glasses.

Nelson, Robert M.↗
NASA NTRS1999

The Earth System Science Pathfinder VOLCAM Volcanic Hazard Mission

The VOLCAM mission is planned for research on volcanic eruptions and as a demonstration of a satellite system for measuring the location and density of volcanic eruption clouds for use in mitigating hazards to aircraft by the operational air traffic control systems. A requirement for 15 minute time resolution is met by flight as payloads of opportunity on geostationary satellites. Volcanic sulfur dioxide and ash are detected using techniques that have been developed from polar orbiting TOMS (UV) and AVHRR (IR) data. Seven band UV and three band IR filter wheel cameras are designed for continuous observation of the full disk of the earth with moderate (10 - 20 km) ground resolution. This resolution can be achieved with small, low cost instruments but is adequate for discrimination of ash and sulfur dioxide in the volcanic clouds from meteorological clouds and ozone. The false alarm rate is small through use of sulfur dioxide as a unique tracer of volcanic clouds. The UV band wavelengths are optimized to detect very small sulfur dioxide amounts that are present in pre-eruptive outgassing of volcanoes. The system is also capable of tracking dust and smoke clouds, and will be used to infer winds at tropopause level from the correlation of total ozone with potential vorticity.

Krueger, Arlin J.↗