Search NASA⌕ Search

SEARCH · Search NASA

Results for “Supersonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Statistical Engineering Toward Commercial Supersonic Flight: NASA's Quesst Mission

NASA’s Quesst Mission has dual goals of demonstrating low-noise supersonic technology in flight and surveying public reactions to low-noise supersonic overflight. For half a century, commercial aircraft have been required to fly slower than the speed of sound over land to prevent “creating an unacceptable situation” on the ground due to sonic booms. However, aircraft shaping techniques honed through decades of research have dramatically changed the way shockwaves from supersonic flight merge together as they travel to the ground. What used to sound like a boom on the ground will be transformed into a thump. NASA is now building a full-scale, piloted demonstration aircraft called the X-59 to demonstrate low-noise supersonic flight. In 2024, the X-59 aircraft will commence a national series of community overflight surveys to collect data on how people perceive “sonic thumps.” The results will be provided to national and international noise regulators as they consider creating new standards that allow commercial supersonic flight over land at acceptably low noise levels. In this presentation we provide historical context for the current prohibitions on supersonic commercial flight. Using data collected during earlier NASA tests, we demonstrate how generalized linear mixed models can be used to inform the functional dose-response curve. We also illustrate simulation experiments of the variability of sonic thump exposure across the United States. Finally, we discuss some of the challenges in designing the future community studies and generalizing them to a nationally-representative dose-response curve.

Quesst↗

Performance of a Supersonic Over-Wing Inlet with Application to a Low-Sonic-Boom Aircraft

Development of commercial supersonic aircraft has been hindered by many related factors including fuel-efficiency, economics, and sonic-boom signatures that have prevented over-land flight. Materials, propulsion, and flight control technologies have developed to the point where, if over-land flight were made possible, a commercial supersonic transport could be economically viable. Computational fluid dynamics, and modern optimization techniques enable designers to reduce the boom signature of candidate aircraft configurations to acceptable levels. However, propulsion systems must be carefully integrated with these low-boom configurations in order that the signatures remain acceptable. One technique to minimize the downward propagation of waves is to mount the propulsion systems above the wing, such that the wing provides shielding from shock waves generated by the inlet and nacelle. This topmounted approach introduces a number of issues with inlet design and performance especially with the highly-swept wing configurations common to low-boom designs. A 1.79%-scale aircraft model was built and tested at the NASA Glenn Research Center's 8-by 6-Foot Supersonic Wind Tunnel (8x6 SWT) to validate the configuration's sonic boom signature. In order to evaluate performance of the top-mounted inlets, the starboard flow-through nacelle on the aerodynamic model was replaced by a 2.3%-scale operational inlet model. This integrated configuration was tested at the 8x6 SWT from Mach 0.25 to 1.8 over a wide range of angles-of-attack and yaw. The inlet was also tested in an isolated configuration over a smaller range of angles-of-attack and yaw. A number of boundary-layer bleed configurations were investigated and found to provide a substantial positive impact on pressure recovery and distortion. Installed inlet performance in terms of mass capture, pressure recovery, and distortion over the Mach number range at the design angle-of-attack of 4-degrees is presented herein and compared to that at 0- degrees, as well as the isolated inlet configuration to highlight installation effects. Performance of the installed inlet fell below that of the isolated inlet at Mach numbers of 1.4 and greater. The installed inlet demonstrated adequate operability over the expected range of angles-of-attack and yaw, but did exhibit definite angle-ofattack and yaw limits at supersonic conditions. At each supersonic flight Mach number, performance parameters near zero yaw angle were relatively insensitive to yaw, but in general the yaw angle yielding best performance was non-zero and varied with angle-of-attack. Performance of the installed inlet is also presented as functions of angle-of-attack and yaw to highlight these effects. Distortion at the aerodynamic interface plane ranged between 10 and 25% at the inlet critical points over the range of flight Mach numbers tested and did not decrease significantly for the isolated inlet. Although these distortion levels would be considered high for operation with a turbine engine, the over-wing installation is likely not as significant a contributor as the low test Reynolds number. This is demonstrated by comparing CFD analysis of the isolated inlet at test scale with that at intermediate and full scales.

Performance↗

Simulation of Landing and Take-Off Noise for Supersonic Transport Aircraft at a Conceptual Design Fidelity Level

The German Aerospace Center has launched an internal project to assess the noise impact associated with supersonic transport aircraft during approach and departure. A dedicated simulation process is established to cover all relevant disciplines, i.e., aircraft and engine design, engine installation effects, flight simulation, and system noise prediction. The core of the simulation process is comprised of methods at the complexity and fidelity level of conceptual aircraft design, i.e., typical overall aircraft design methods and a semi-empirical approach for the noise modeling. Dedicated interfaces allow to process data from high fidelity simulation that will support or even replace initial low fidelity results in the long run. All of the results shown and discussed in this study are limited to the fidelity level of conceptual design. The application of the simulation process to the NASA 55t Supersonic Technology Concept Aeroplane, i.e., based on non-proprietary data for this vehicle, yields similar noise level predictions when compared to the published NASA results. This is used as an initial feasibility check of the new process and confirms the underlying methods and models. Such an initial verification of the process is understood as an essential step due to the lack of available noise data for supersonic transport aircraft in general. The advantageous effect of engine noise shielding on the resulting system noise is demonstrated based on predicted level time histories and certification noise levels. After this initial verification, the process is applied to evaluate a conceptual supersonic transport design based on a PhD thesis with two engines mounted under the wing, which is referred to as aircraft TWO. Full access to this vehicle’s design and performance data allows to investigate the influence of flight procedures on the resulting noise impact along approach and departure. These noise results are then assembled according to proposed Federal Aviation Agency regulations in their Notice of Proposed Rulemaking, e.g., speed limitations, for Supersonic transport noise certification and the regulations from Noise Chapters of the Annex 16 from the International Civil Aviation Organization in order to evaluate the resulting levels as a function of the flight procedure.

noise↗

Aircraft Noise and Performance Data for a Notional Supersonic Business Jet

The International Civil Aviation Organization recently completed a study that determined the global environmental impact of adding several hypothetical supersonic aircraft types to the existing subsonic fleet. NASA supported this study by designing a notional 55-tonne supersonic business jet. The airplane is named the Supersonic Technology Concept Aeroplane by the international community. Performance, noise, and exhaust emission predictions for this transport were used to inform development of new environmental standards for future supersonic civil aircraft. The behavior of the aircraft in an operational setting is considered. Calculation of aircraft noise and performance data for this aircraft is the focus of this paper. Noise abatement departure procedures, stage length performance, and noise-power-distance data are determined using NASA tools. Also investigated are some of the anticipated behaviors and requirements of supersonic aircraft in the commercial airspace.

Aircraft noise↗

Quantifying Uncertainty of Landing and Takeoff Noise for Commercial Supersonic Aircraft

Of the many challenges faced by manufacturers attempting to offer supersonic travel to the public, the uncertainty in predicting the noise of these aircraft in airport operations has an immediate impact. No noise regulation exists in FAA or ICAO for certifying such aircraft, as these organization require solid data, usually from existing aircraft. Manufacturers are taking large risks to design a vehicle not knowing whether it will be allowed to fly. A partial solution to this conundrum is to use physics-based simulations to provide the “data” used to calibrate system-level prediction methods, carefully documenting the uncertainty of the method for application to supersonic aircraft. A close look at the accuracy of empirical prediction methods points to areas where improvements need to be made if noise studies of supersonic aircraft are to be useful. As NASA embarks on a focused research program to improve predictions of noise from the noise-dominant propulsion noise of commercial supersonic aircraft, this paper documents the work done to baseline the uncertainties found in today’s noise prediction methods. A relatively simplistic method was developed, summarizing the error of the empirical methods on a component basis and following their impact on the total aircraft during landing and takeoff operations using Monte Carlo analysis. By this method it is found that current empirical noise prediction methods have an uncertainty of 1.5 EPNdB cumulative for propulsion noise of a representative conventional subsonic passenger aircraft. When applied to likely near-term supersonic commercial aircraft, the uncertainty is 7.6 EPNdB cumulative, a difference that must be reduced if the prediction methods are to guide decision makers.

Airport noise↗

Flametube Evaluation of a Lean-Lean Combustor Concept Developed for Supersonic Cruise Aircraft

Gaseous emissions were measured in single-cup flametube tests of an advanced low-NO x combustor concept at simulated supersonic cruise conditions. The combustor concept is a low technology readiness level (TRL), lean front-end design developed under the NASA Fundamental Aeronautics/Supersonics project to minimize NO x emissions at supersonic cruise. The flametube conditions matched or approached combustor conditions at supersonic cruise, with combustor inlet temperatures up to 920 K, inlet pressures up to 19 bar, and combusted gas temperatures up to 2,120 K. Whether these conditions met or just approached supersonic cruise conditions depended on the type of engine the combustor would be installed in. Two types of engines were considered here: a "derivative" engine based on a current technology and an "advanced" engine with a higher operating pressure ratio and higher temperature limits. For the "derivative" engine, the combustor is expected to be at least close to meeting the NASA NO x emissions goal of 10 g-NO x /kg-fuel at supersonic cruise. However, with the higher combustor inlet and flame temperatures of the advanced engine, NO x emissions are expected to be well above the goal.

supersonic cruise↗

Optimal Mission Profile for Low-Boom Supersonic Aircraft

An optimal mission profile, called the low-boom mission profile, is proposed for low-boom supersonic aircraft. The low-boom mission profile uses a fixed AoA for the cruise segment until reaching the cruise ceiling. The fixed AoA is determined by the cruise condition for the low-boom shaping of the aircraft. The derived CL trajectory is not necessarily the optimal trajectory for the cruise range when unrestricted supersonic flight is allowed. The undertrack sonic boom ground noise level is reduced during the cruise because of the increasing altitude from the fixed AoA trajectory and the approximate invariance of nondimensional overpressure at 3BL below a supersonic aircraft with respect to cruise altitude change when the AoA and cruise Mach are fixed. The approximate invariance of nondimensional overpressure at 3BL below a supersonic aircraft is verified using both Euler and Reynolds-averaged Navier-Stokes CFD solvers. A low-boom supersonic transport concept is used to illustrate that, compared to the fixed cruise altitude trajectory, the low-boom mission profile can increase the cruise range of a low-boom aircraft and reduce the undertrack sonic boom ground noise levels for the entire cruise segment. One significant contribution of this paper is the implication that an aircraft OML satisfying a sonic boom ground noise level constraint at SOC will satisfy the same noise level constraint over the entire cruise segment, as long as a fixed AoA trajectory is flown.

Low-boom characteristics↗

Toward a second-generation supersonic transport.

A number of promising avenues of research and development are considered in relation to an advanced supersonic transport which has improved range/payload characteristics and lower airport noise and sonic boom than current-generation supersonic transports. The prospects for advanced technology suggest that a high lift-to-drag-ratio configuration incorporating advanced materials and control concepts and utilizing a variable-cycle engine or perhaps an advanced dry turbojet, will yield an advanced supersonic transport which is economically viable and socially acceptable. Hydrogen fuel offers great promise for future supersonic aircraft, however, the formidable problems associated with the use of such fuel probably precludes its use on any near term second-generation supersonic transport. The state of technology in some of the areas discussed is not very far advanced and, consequently, a major effort will be required to bring these technologies to a state of readiness on a timely basis.

Loftin, L. K., Jr.↗

Ingestion and dispersion of engine exhaust products by trailing vortices for supersonic flight in the stratosphere

Detailed analysis has been made of the ingestion and dispersion of engine exhaust products into the trailing-vortex system of a supersonic aircraft flying in the stratosphere. The rate of mixing between the supersonic jet and the coflowing supersonic stream was found to be an order of magnitude less than would be expected on the basis of subsonic eddy-viscosity results. Ingestion started at the end of the potential core, and all hot gas from the engine was ingested into the trailing vortex within two core lengths. The temperature rise in the wake of the supersonic aircraft was found to be much greater than that for a subsonic transport, since temperature rise varies directly as speed squared and inversely as aspect ratio. As a result, the final buoyancy phase started only ten seconds after leaving the trailing edge. Comparison between the buoyancy calculations for the supersonic case with nondimensionalized subsonic aircraft contrail data on wake spreading showed good agreement.

Nielsen, J. N.↗

Propulsive-lift concepts for improved low-speed performance of supersonic cruise arrow-wing configurations

Low-aspect-ratio highly swept arrow-wing supersonic aircraft possess high levels of aerodynamic efficiency at supersonic cruising speeds, however, their inherently poor low-speed lift characteristics require design constraints that compromise supersonic performance. The data discussed in this paper were obtained in wind tunnel tests with supersonic crusing configurations, in which propulsive-lift concepts were used to improve low-speed performance. The data show that the increased low-speed lift provided by propulsive-lift permits reduction of both wing size and installed thrust. This yields a batter engine/airframe match for improved supersonic cruise efficiency and range, while still providing acceptable take-off field lengths.

Coe, P. L., Jr.↗

Historical development of worldwide supersonic aircraft

Aerodynamic problems in the development of supersonic aircraft, their solutions, and innovative design features are presented. Studies of compressibility, introduction of jets, supersonic phenomena, transonic drag and lift, longitudinal and directional stability, dynamic pressure fields, and advent of the supersonic fighter are discussed. The flight research aircraft such as the Bell X-1 and the Douglas-558, the century series models, reconnaissance aircraft, the multimission tactical fighter, and the current generation fighters such as F-16 and F-18 are described. The SCAT program is considered, along with supersonic developments in Great Britain, France, and USSR. It is concluded that the sonic boom still appears to be an inherent problem of supersonic flight that particularly affects overland commercial flight, and efforts continue for increased efficiency for economic and performance gains and increased safety for military and civilian aircraft.

Spearman, M. L.↗

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 3: Case manual (version 1.0)

Numerous applications of the PAN AIR computer program system are presented. PAN AIR is user-oriented tool for analyzing and/or designing aerodynamic configurations in subsonic or supersonic flow using a technique generally referred to as a higher order panel method. Problems solved include simple wings in subsonic and supersonic flow, a wing-body in supersonic flow, wing with deflected flap in subsonic flow, design of two-dimensional and three-dimensional wings, axisymmetric nacelle in supersonic flow, and wing-canard-tail-nacelle-fuselage combination in supersonic flow.

Medan, R. T.↗

A first-order Green's function approach to supersonic oscillatory flow: A mixed analytic and numeric treatment

A frequency domain Green's Function Method for unsteady supersonic potential flow around complex aircraft configurations is presented. The focus is on the supersonic range wherein the linear potential flow assumption is valid. In this range the effects of the nonlinear terms in the unsteady supersonic compressible velocity potential equation are negligible and therefore these terms will be omitted. The Green's function method is employed in order to convert the potential flow differential equation into an integral one. This integral equation is then discretized, through standard finite element technique, to yield a linear algebraic system of equations relating the unknown potential to its prescribed co-normalwash (boundary condition) on the surface of the aircraft. The arbitrary complex aircraft configuration (e.g., finite-thickness wing, wing-body-tail) is discretized into hyperboloidal (twisted quadrilateral) panels. The potential and co-normalwash are assumed to vary linearly within each panel. The long range goal is to develop a comprehensive theory for unsteady supersonic potential aerodynamic which is capable of yielding accurate results even in the low supersonic (i.e., high transonic) range.

Freedman, M. I.↗

Effect of silane concentration on the supersonic combustion of a silane/methane mixture

A series of direct connect combustor tests was conducted to determine the effect of silane concentration on the supersonic combustion characteristics of silane/methane mixtures. Shock tube ignition delay data indicated more than an order of magnitude reduction in ignition delay times for both 10 and 20 percent silane/methane mixtures as compared to methane. The ignition delay time of the 10 percent mixture was only a factor of 2.3 greater than that of the 20 percent mixture. Supersonic combustion tests were conducted with the fuel injected into a model scramjet combustor. The combustor was mounted at the exit of a Mach 2 nozzle and a hydrogen fired heater was used to provide a variation in test gas total temperature. Tests using the 20 percent silane/methane mixture indicated considerable combustion enhancement when compared to methane alone. This mixture had an autoignition total temperature of 1650 R. This autoignition temperature can be contrasted with 2330 R for hydrogen and 1350 R for a 20 percent silane/hydrogen mixture in similar hardware. Methane without the silane additive did not autoignite in this configuration at total temperatures as high as 3900 R, the maximum temperature at which tests were conducted. Supersonic combustion tests with the silane concentration reduced to 10 percent indicated little improvement in combustion performance over pure methane. The addition of 20 percent silane to methane resulted in a pyrophoric fuel with good supersonic combustion performance. Reducing the silane concentration below this level, however, yielded a less pyrophoric fuel that exhibited poor supersonic combustion performance.

Northam, G. B.↗

Supersonic through-flow fan assessment

A study was conducted to assess the performance potential of a supersonic through-flow fan engine for supersonic cruise aircraft. It included a mean-line analysis of fans designed to operate with in-flow velocities ranging from subsonic to high supersonic speeds. The fan performance generated was used to estimate the performance of supersonic fan engines designed for four applications: a Mach 2.3 supersonic transport, a Mach 2.5 fighter, a Mach 3.5 cruise missile, and a Mach 5.0 cruise vehicle. For each application an engine was conceptualized, fan performance and engine performance calculated, weight estimates made, engine installed in a hypothetical vehicle, and mission analysis was conducted.

Kepler, C. E.↗

Program Solves Euler Equations Of Supersonic Flow

EMTAC (Euler Marching Technique For Accurate Computation) computer program employs Euler marching algorithm for computing supersonic flows. Enables accurate nonlinear analysis of nonlinear dynamics of supersonic flow over wide range of supersonic mach numbers and angles of attack. Based on exact equations of dynamics of inviscid gas and valid for computations of flows at low and high supersonic mach numbers exhibiting strong shocks and rotational effects. Program also used for inviscid three-dimensional flows fully subsonic or transonic (subsonic with supersonic pockets). Written in FORTRAN V.

Szema, Kuo-Yen↗

Mach wave emission from a high temperature supersonic jet

The paper considers the compressible Rayleigh equation as a model for the Mach wave emission mechanism associated with high temperature supersonic jets. Solutions to the compressible Rayleigh equation reveal the existence of several families of supersonically convecting instability waves. These waves directly radiate noise to the jet far field. The predicted noise characteristics are compared to previously acquired experimental data for an axisymmetric Mach 2 fully pressure balanced jet operating over a range of jet operating total temperatures from ambient to 1370 K. The results of this comparison show that the first order supersonic instability wave and the Kelvin-Helmholtz first, second, and third order modes have directional radiation characteristics that are in agreement with observed data. The assumption of equal initial amplitudes for all of the waves leads to the conclusion that the flapping mode of instability dominates the noise radiation process of supersonic jets. At a jet temperature of 1370 K, supersonic instability waves are predicted to dominate the noise radiated at high frequency at narrow angles to the jet axis.

Seiner, J. M.↗

Aerodynamic performance of a supersonic throughflow fan stage

The NASA LeRC has begun a program to design, analyze, build, and test a fan stage that can operate with supersonic axial velocities throughout the stage. This report presents the results from the initial experimental evaluation of the supersonic throughflow fan stage. The stage was tested with flows at subsonic and supersonic inlet axial Mach numbers and with rotor speeds at 40 to 100 percent of design speed. Overall performance as well as detailed performance obtained from radially and circumferentially traversing probes downstream of the stator vanes is presented. At the design rotor tip speed of 1500 ft/s and the design Mach number of 2.0, the measured overall pressure ratio was 2.22, and the corresponding adiabatic efficiency was 0.694. Transition from subsonic to supersonic flow was successfully demonstrated at 75, 90, and 100 percent of design speed. In that speed range, the stage 'unstart' (transition from supersonic to subsonic inlet axial conditions) occurred at an inlet axial Mach number of about 1.36, which corresponds to the Mach number at which the stage started.

Royce D Moore↗