Search NASA⌕ Search

SEARCH · Search NASA

Results for “Syngas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

116 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Calculating the Effects of Solids Input and Removal as a Temperature Control in the Advanced Scale Up Reactor Experiment (ASURE) Facility at NETL Using Aspen

The Advanced Scale Up Reactor Experiment (ASURE) facility at NETL is being designed to be a fuel-flexible multi-purpose reactor that can be used for pyrolysis/gasification or evaluation of other high pressure “circulating fluidized bed” (CFB) chemical processes. The initial system design calculations for pyrolysis/gasification are presented in this work showing the expected performance of the ASURE facility when used as a biomass conversion reactor. Several other areas of application include gasification of any carbonaceous fuel including biomass, coal, plastics, and other waste materials. The reactor can therefore be used to produce SYNGAS of various compositions and hydrogen as well as other high value chemicals resulting from a typical tuned gasification process. This paper discusses an ASPEN model of the facility, focusing on the riser of the CFB reactor and the solids recirculation loop. The ASPEN model divides the riser into two sections. A bottom section which receives ash, char and sand which have been recirculated from a return loop. In this section an inert fluidization gas, (N2 or CO2), is introduced which acts as the primary mover of the solids through the system. The bottom section is equipped with a restricted air feed so that the recirculated char can be partially oxidized. This oxidation process along with the inventory of recirculating sand are used to effectively control the temperature in the following two chemical conversion sections of the reactor which are the pyrolysis zone followed by a tar cracking zone. Fresh fuel is added to the pyrolysis zone and undergoes drying and devolatilization. The products ash, char, volatile matter, and water vapor exit the pyrolysis zone and enter the reaction block for tar cracking. Steam and CO2 gasification reactions will be incorporated into the tar cracking zone, however at the design operating temperature, conversion from these reactions is expected to be essentially zero. The unit when completed in 2026 will test mixtures of biomass, plastics, and waste coal. This paper presents the basic ASPEN engineering design model for this project and provides preliminary sensitivity studies to determine how the various parts of the reactor will perform.

ASSURE↗
DOE OSTI2025

C3MechLite: An integrated component library of compact kinetic mechanisms for low-carbon, carbon neutral and zero-carbon fuels

Based on our latest detailed chemical reaction mechanism, C3MechV4.0, we have developed two reduced reaction mechanisms—C3MechLite and C3MechCore—targeting C 0 –C 3 chemical species including NH 3 . C3MechLite (61 species), contains a number of species comparable to GRI-Mech (53 species), that can accurately predict the combustion characteristics of hydrogen, carbon monoxide, ammonia, methane, natural gas, nitrogen oxides, and their mixtures for a wide range of conditions. C3MechCore (118 species) targets a more comprehensive range of C 0 –C 3 fuels, including ammonia, methanol, ethanol, and dimethyl ether. Both mechanisms demonstrate predictive accuracy comparable to C3MechV4.0 for the combustion characteristics of the target fuels. C3MechLite is designed with a component library structure, enabling further reduction in mechanism size depending on the fuel(s) of interest for 2D/3D numerical simulations. Various combinations of component libraries were validated, and the average prediction error remains within 1 % compared to C3MechLite. Furthermore, the mechanism was applied to 3D LES simulations of H 2 lifted flames and was confirmed to reproduce flame characteristics with high accuracy. C3MechLite and its component library structure enable high-fidelity and computationally efficient chemical kinetic mechanisms, paving the way for application in more complex combustion simulations.

Ammonia↗
DOE OSTI2025

Biomanufacturing from gaseous C1 feedstocks: A perspective on opportunities and challenges

Single-carbon (C1) substrates including carbon dioxide, carbon monoxide, and methane are abundantly available from natural and anthropogenic sources and present potential feedstocks for biomanufacturing. Utilizing these C1 gas feedstocks in bioprocesses for sustainable production of chemicals and fuels could prove pivotal in removing excess carbon from the atmosphere. This perspective describes the spectrum and sources of CO2, CO, and CH4 and examines emerging opportunities in microbial bioconversion and bioelectrochemical processes for these feedstocks. We discuss existing challenges in bioprocess development that currently restrict the commercialization of C1 biomanufacturing technologies. We detail different aerobic and anaerobic bioconversion approaches for C1 feedstocks employing pure and mixed cultures and examine the suitability of each scenario for producing specific molecules. Beyond strain engineering and bioprocess constraints, we address often overlooked factors that limit the development of efficient and reliable bioprocesses, including technology availability for research and safety considerations. We then discuss and recommend the necessary safety features and technological research tools for developing fast, safe, and efficient bioprocesses using gaseous feedstocks to support the scale-up and commercialization of C1 biomanufacturing technologies. This perspective provides an overview of the current scientific and industrial state of the art and offers insights into future technological needs that must be addressed to realize the potential of biomanufacturing from gaseous feedstocks. Synopsis: C1 gases offer a sustainable feedstock for biomanufacturing of fuels and chemicals. This work analyzes bioconversion methods, challenges, and safety considerations, and emphasizes the need for improved technology to enable commercialization.

Biomanufacturing↗
DOE OSTI2025

A Pressure-Swing Process for Reactive CO2 Capture and Conversion to Methanol through Precise Control of Co-Located Active Sites in Dual Functional Materials

The goals of this project are to design and develop tailored dual-functional materials (DFMs) and the accompanying pressure-swing process for the reactive capture and conversion (RCC) of CO 2 to methanol, a vital product in the chemical market and a versatile precursor to fuels. Throughout this project, NREL researcher team has successfully developed 2 groups of DFM and associated cyclic RCC procedure to selectivity produce either methanol or CO, which is a major intermediate for methanol synthesis with commercially available technologies.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

Metallic Phase-Free Zn-Al Mixed Oxide Dual Function Materials Enable High Co Selectivity in Reactive Carbon Capture From Dilute Streams

Scaling conventional carbon capture and utilization methods can be limited by cost and permitting issues associated with transportation of captured CO2. Reactive carbon capture (RCC), in which a single solid-phase dual function material (DFM) is used to both capture CO2 from dilute streams (e.g., flue gas) and catalytically convert the bound species to products in a single unit operation, has the potential to reduce energy and capital costs by over 50% relative to separate capture and conversion. To incentivize adoption, high-value products such as methanol and CO should be targeted. Appealingly, CO can be produced at atmospheric pressure, thereby lowering overall H2 demand; however, high reaction temperatures (> 600 degrees C) and the use of oxidizable transition metals, such as Ni, are often necessary to drive the reverse water-gas shift (RWGS) during reactive desorption of the bound CO2. The sensitivity of these transition metals to oxygen undercuts their utility in point source RCC. To further derisk RCC, it is essential to develop metallic-phase free DFMs that are insensitive to residual oxygen in flue gas and can achieve selective reactive desorption to CO at moderate pressures (< 400 degrees C). To this end, we have developed K-modified Zn-Al mixed oxides (K/ZnAlOx) to convert captured CO2 to CO with > 97% selectivity and yields up to 53% of captured CO2 at 400 degrees C. Complementary in situ spectroscopy studies revealed the role of K-modification in improving RCC performance of unmodified ZnAlOx. The top performing DFM was also subjected to extended RCC cycling with oxygen co-fed with CO2 during the capture test to assess durability under simulated flue gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗