Search NASA⌕ Search

SEARCH · Search NASA

Results for “Synthesis and processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Process design for calcination of nickel-based cathode materials by in situ characterization and multiscale modeling

Developing battery materials towards commercial use, from the early discovery through synthesis, processing, scaling up, and eventually to industrial production, may take decades. A notable example is Ni-based layered oxides, which were discovered as early as 1950s and intensively pursued as cathode active materials (CAMs) since the early 90s but have yet to realize their full commercial potential. Significant efforts have been devoted to materials development aiming at improving performance, far less to process development for large-scale synthesis and processing of CAMs. In this paper, we present a rational design of calcination for scalable production of Ni-based CAMs. We start with an overview of the current understanding and knowledge gaps hindering rational process design and scaling-up of the calcination process. Then with specific examples, we demonstrate how to tackle those fundamental challenges through in situ characterization and multiscale modeling. Finally, we conclude by providing perspectives on the remaining challenges and emerging opportunities in commercial development of Ni-based cathodes, calling for more endeavors in this field.

25 ENERGY STORAGE↗

Characterization of MC&A for the Molten Salt Fuel Cycle

Advanced reactor developers are exploring diverse reactor designs, including molten salt reactors (MSRs). These advanced reactors are considered for wider applications and a range of deployment locations, including supporting the integration of renewable energy sources in the grid. There are three main types of MSRs: (1) reactors in which the fuel salt freely circulates within the core; (2) reactors with the fuel salt contained within vented fuel tubes; and (3) reactors that use molten salt solely as a coolant, with the fuel in a separate, solid form. In this document, the term MSR refers specifically to the first two types, which use fuel salt—special nuclear material (enriched uranium, plutonium, and 233 U) in chloride or fluoride form mixed with chloride- or fluoride-based carrier salt in a peritectic mixture—as the primary medium for fission. The composition of fuel salt, both at startup and for makeup or refueling, varies depending on the MSR design and the chosen fuel cycle approach, which can be either once-through or closed. For MSRs, a variety of fuel cycle approaches (e.g., U, U–Pu, U–Pu–TRU, U–Th, U–Pu–Th) are being considered. Fuel in MSRs is much different than traditional solid fuel, including its preparation. The uniqueness warrants investigation into characterizing fuel preparation processes, known as fuel salt synthesis . This effort characterized major fuel preparation and synthesis processes, identifying temperature, equipment, and environmental requirements for uranium-, plutonium-, and thorium-based fuel preparation and synthesis. Because MSR fuel salt synthesis facilities handle special nuclear material in loose, bulk form, a material control and accounting plan will be required for licensing from the US Nuclear Regulatory Commission or under the US Department of Energy authorization. This effort serves as a foundation to investigate material control and accounting approaches for synthesis facilities, including determining measurement points and techniques. Because several MSR developers are planning demonstration facilities in the coming years, this effort will support stakeholders with preparing or reviewing material control and accounting plans for providing assurance that all special nuclear material is accounted for at fuel salt synthesis facilities. This report was produced for Materials Protection, Accounting, and Control Technologies (MPACT) program under the US Department of Energy (DOE), Office of Nuclear Energy, Nuclear Fuel Cycle and Supply Chain.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Process scale-up and optimization of the metal-organic framework synthesis

Mosaic Materials is incubated under Cyclotron Road LBNL, focusing on design, synthesis, and characterization of metal-organic frameworks as highly selective and energy efficient adsorbents for carbon dioxide. The Chief Science Officer, Dr. Thomas McDonald, invented a new class of phase-change adsorbents for acid gas removal that the company is working to commercialize as its first product. ABPD worked with Mosaic team to scale up their synthesis process and evaluate the downstream processing.

36 MATERIALS SCIENCE↗

Optimal Methanol Production via Sorption-Enhanced Reaction Process

To counter the equilibrium limitations in traditional methanol production from synthesis gas, a periodic and sorption-enhanced methanol synthesis process (SE-MeOH) with in situ removal of water byproduct is designed and optimized. A generalized reaction–adsorption modeling and simulation framework is coupled with a simulation-based constrained gray-box optimizer to obtain the optimal cycle configuration, design parameters, process specifications, and operating conditions. The best-case results indicate that SE-MeOH processes can break the barrier of the current limit of industrial methanol yield and improve it by 55–87% with a slight compromise (9–46%) on CH 3 OH production capacity. This trade-off is a result of periodic operation which is required for sorption enhancement. The techno-economic optimization of a base industrial reactor also leads to more than 7% improvement in methanol yield with only 2% decrease in production capacity while keeping the cost of syngas-to-methanol production competitive. The SE-MeOH system is further optimized through varying the feed specifications and number of reactor tubes. Furthermore, the results suggest that the synthesis gas composition, flow rate, and number of tubes are the major factors in determining methanol process performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Insight of Synthesis of Single Crystal Ni-Rich LiNi 1-x-y Co x Mn y O 2 Cathodes

Single-crystal Ni-rich LiNi 1-x-y Co x Mn y O 2 (NCM) cathodes have garnered widespread attention in the lithium-ion battery community due to their unique advantages in mechanical performance and their ability to minimize interfacial electrochemical side reactions. The synthesis of single-crystal materials with monodisperse and appropriate size, minimal lattice defects, and highly ordered structures is the key for high-performance batteries. However, achieving this goal poses challenges due to the lack of in-depth understanding regarding specific experimental parameters and the solid reaction mechanism during the synthesis process. Further, in this review, the aim is to provide an in-depth analysis of the critical process parameters involved in the synthesis and their impact on crystal morphology, structure, and electrochemical performance. Consequently, the first section focuses on the effect of the precursor morphology, lithium salt, atmosphere, and sintering procedure. In the second section, the study delves into an in-depth discussion of the solid reaction and crystal growth mechanism. Lastly, it is concluded by highlighting the prospects and challenges associated with the synthesis and application of single-crystal Ni-rich NCM cathodes.

25 ENERGY STORAGE↗

Out-of-distribution detection with non-parametric density estimation for models predicting processing history of uranium ore concentrates

The rapid advancement in machine learning (ML) and computer vision (CV) coincides with the growth of interest in deploying these ML/CV models in numerous fields from medicine to social science. Similar to those areas, we have witnessed a great number of works in materials science employing ML/CV models – neural networks in particular – in their studies in recent years. These models have proven to obtain accurate performance in various tasks. However, these models struggle to attain a similar performance when encountering test samples coming from a distribution that is different from the training set. More importantly, they fail without providing any warning to the users. Therefore, we propose a framework for detecting out-of-distribution (OOD) samples to alert users when a human intervention might be necessary in this work. Specifically, we explore the use of a non-parametric density estimation method to detect OOD samples. Here, we assess OOD detection capability of the proposed framework on ML models developed for categorizing precipitation routes of U 3 O 8 when encountering OOD datasets that contain samples (1) undergone different imaging acquisition process, (2) undergone different material synthesis process, and (3) different materials than ID set. Through those experiments, we achieve an average area under the receiver operating characteristic (AUROC) of at least 91% on average in detecting OOD samples. With minimal overhead cost and superior performance, the proposed framework enables a reliable and safe system when deploying in real-world scenarios.

Convolutional neural networks↗

Understanding the Molecular‐level Interactions Between Ionic Liquids and Molecular Species to Design and Develop Novel Solvent Systems for Environmental and Energy Applications (DOE-EPSCoR – DE‐SC0020282 Final Technical Report)

The central theme of the work is to develop an understanding of the molecular-level interactions between ionic liquids and molecular species that govern a specific set of separations (aliphatic/aromatic, Topic I), reactions (SNAr, high-temp reactions, Topic II) and polymer (ultrahigh performance polymers, Topic III) synthesis processes through the synergistic application of synthesis, characterization and simulation. Understanding these interactions will provide significant insight into how to optimize these and other processes that are influenced by these interactions. An important additional goal is to build the collaborative infrastructure to enable the cluster researchers to develop professional relationships to enhance this and future research endeavors. This collaboration, the Alabama Advanced Solvents Cluster (AASC) is on ongoing collaborative effort between many of the investigators.

36 MATERIALS SCIENCE↗

Polynorbornene as a low loss matrix material for IR metamaterial applications.

Novel low loss photopatternable matrix materials for IR metamaterial applications were synthesized using the ring opening metathesis polymerization reaction (ROMP) of norbornene followed by a partial hydrogenation to remove most of the IR absorbing olefin groups which absorb in the 8-12 {micro}m range. Photopatterning was achieved via crosslinking of the remaining olefin groups with alpha, omega-dithiols via the thiol-ene coupling reaction. Since ROMP is a living polymerization the molecular weight of the polymer can be controlled simply by varying the ratio of catalyst to monomer. In order to determine the optimum photopattenable IR matrix material we varied the amount of olefin remaining after the partial hydrogenation. Hydrogenation was accomplished using tosyl hydrazide. The degree of hydrogenation can be controlled by altering the reaction time or reaction stoichiometry and the by-products can be easily removed during workup by precipitation into ethanol. Several polymers have been prepared using this reduction scheme including two polymers which had 54% and 68% olefin remaining. Free standing films (approx. 12 {micro}m) were prepared from the 68% olefin material using draw-down technique and subsequently irradiated with a UV lamp (365 nm) for thirty minutes to induce crosslinking via thiol-ene reaction. After crosslinking, the olefin IR-absorption band disappeared and the Tg of the matrix material increased; both desirable properties for IR metamaterial applications. The polymer system has inherent photopatternable behavior primarily because of solubility differences between the pre-polymer and cross-linked matrix. Photopatterned structures using the 54% as well as the 68% olefin material were easily obtained. The synthesis, processing, and IR absorption data and the ramifications to dielectric metamaterials will be discussed.

36 MATERIALS SCIENCE↗

Controlling the sol–gel process of nano-crystalline lithium-mica glass-ceramic by its chemical composition and synthesis parameters

This paper aims to explore the impact of the parameters such as pH of the system, refluxing temperature, water quantity and chemical composition on the sol–gel synthesis of lithium-mica glass-ceramic nano-powder. The synthesis process was accomplished using two chemical composition formula (Li{sub (1+x)}Mg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6.5x}F{sub 2} and LiMg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6x}F{sub 2}). X-ray diffraction, Brunauer–Emmett–Teller surface area measurement and scanning electron microscopy techniques were applied to evaluate a variety of as-synthesized samples. Consequently, a transparent homogeneous sol was obtained under the conditions as pH ≤ 4, synthesis temperature ≤ 50 °C, and mol ratio of water to chemicals ≤ 2. The prepared nano-powders under such conditions were in the range of 60–100 nm. The results also revealed that the mica glass-ceramics prepared based on the composition Li{sub (1+x)}Mg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6.5x}F{sub 2} possessed finer powders due to their slow hydrolysis process. Moreover, any reduction in the stoichiometric deviation of lithium mica (x) leads to acquiring finer powders. - Highlights: • A transparent homogeneous sol leads to prepare nanopowders in the range of 60–100 nm. • The particles synthesized at lower temperatures possess finer sizes. • The acquired product which is prepared with excessive water offers larger sizes. • Any reduction in stoichiometric deviation leads to acquiring finer powders. • Taking synthesis composition as Li{sub (1+x)}Mg{sub 3}AlSi{sub 3(1+x)}O{sub 10+6.5x}F{sub 2} offers finer powders.

36 MATERIALS SCIENCE↗

Dielectric and ferroelectric analysis of nanoparticle/nanocrystalline barium titanate and PLZT.

Attractive for numerous technological applications, ferroelectronic oxides constitute an important class of multifunctional compounds. Intense experimental efforts have been made recently in synthesizing, processing and understanding ferroelectric nanostructures. This work will present the systematic characterization and optimization of barium titanate and lead lanthanum zirconate titanate nanoparticle based ceramics. The nanoparticles have been synthesized using several solution and pH-based synthesis processing routes and employed to fabricate polycrystalline ceramic and nanocomposite based components. The dielectric and ferroelectric properties of these various components have been gauged by impedance analysis and electromechanical response and will be discussed.

36 MATERIALS SCIENCE↗

Photoelectrochemical properties of MOF-induced surface-modified TiO 2 photoelectrode

Heteroatom doping and surface modification with oxides are both important strategies to improve the photoelectrochemical (PEC) activities of TiO 2 photoelectrodes. However, it is difficult to combine the two strategies into a single synthesis process. Herein, a simple one-pot synthesis method was developed to modify a TiO 2 photoelectrode surface by N-doping while simultaneously modifying the surface with In 2 O 3 and NiO. This method involved growing MOF onto a TiO 2 surface with N-containing organic ligands and In and Ni salts as metal precursors, followed by heat treatment at 600 °C. The roles of heteroatom doping and oxide modification are proposed as follows. (i) N-Doping extends the absorption edge of the TiO 2 to a longer wavelength region and enhances visible light absorption. (ii) N-Doping together with the passivation of TiO 2 surface trap states by oxide modification increases the donor density in TiO 2 . (iii) The generated suitable interfaces on the surface of TiO 2 facilitate photogenerated charge separation and transfer. In comparison with the pristine TiO 2 photoelectrode, the metal oxide- and heteroatom-modified TiO 2 photoelectrode exhibits superior photoelectrochemical performance under both simulated sunlight and visible light illumination. Suitable substrate of the electrode, appropriate size of the as-synthesized MOF precursors, and choice of ligands and metal ions are important factors for this strategy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrochemically induced crystallization of amorphous materials in molten MgCl2: boron nitride and hard carbon

A novel and versatile strategy for the amorphous-to-crystalline transformation of boron nitride (BN) with the capability to control the degree of crystallization was developed through an electrochemical pathway using MgCl 2 at low temperature (750 °C). This procedure can be extended to the transformation of amorphous carbon to graphite, which significantly reduces the energy and cost, accelerates the synthesis process and could potentially replace industrial graphite synthesis globally. Therefore, the synthesized graphite exhibits much enhanced electrochemical performance at high charge–discharge rates (5C) compared to commercial synthetic graphite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanocomposites from Solution-Synthesized PbTe-BiSbTe Nanoheterostructure with Unity Figure of Merit at Low-Medium Temperatures (500-600 K)

The large-scale implementation of thermoelectric devices is inhibited, in part, by the limited temperature range where each material can operate at its highest efficiency, as evaluated by the dimensionless figure of merit ( zT = S 2 σT/κ ). To date, Bi 2 Te 3 -based materials have been restricted to zT ≥ 1 between 300-500 K, before the onset of bipolar conduction reduces the zT significantly. Herein, we show that a scalable, low-temperature solution process method can be used to synthesize precursor material for Pb-doped Bi x Sb 2-x Te 3 bulk nanocomposites with a zT = 1 over the 500-600 K range, making this material suitable for low-grade waste heat recovery for the first time. Our success in increasing the efficiency of p-type Bi x Sb 2-x Te 3 at higher temperatures can be largely explained by the increase in the optical band gap, according to the Burstein-Moss shift, due to Pb doping, thus delaying the onset of bipolar conduction. Furthermore, the solution synthesis method enabled controlled nanostructuring of the bulk materials, which greatly reduced the thermal conductivity over the investigated temperature range. Lastly, our scalable synthesis processing method may be applicable to not only other thermoelectrics, but also in fields such as photocatalysis, electronics and optoelectronics.

36 MATERIALS SCIENCE↗

Synthesis and photocatalytic activity of titania microspheres with hierarchical structures

Research highlights: {yields} Lauryl alcohol directs the formation of titania with hierarchical structures. {yields} Hierarchical structures endow the higher specific area to titania. {yields} Titania had a higher photocatalytic activity than commercial Degussa P25. {yields} The synthesis process of the target product is low-cost. -- Abstract: A combined sol-gel and solvothermal process was introduced to fabricate the titania microspheres with hierarchical structures by using lauryl alcohol as the structure-directing agent. Scanning electron microscope, high-resolution transmission electron microscope, Fourier transform infrared spectrograph and powder X-ray powder diffraction indicated that the molar ratio of lauryl alcohol, water and tetra-n-butyl titanate was the key factor for the formation of the mono-dispersed titania with anatase phase and the optimal ratio was 1.2:4:1. The diameter of the end-product was 523 {+-} 74 nm and it was composed of smaller nanoparticles with about 6.8 nm size in diameter. Photocatalytic activity of the end-product was investigated by employing Rhodamine B and Methylene blue as the model compounds. The target microspheres exhibited the higher photocatalytic efficiency compared with commercial Degussa P25 titania and this result might be due to the hierarchical structures of microspheres according to the analysis of Brunauer-Emmett-Teller specific surface areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Comparative Study of Differentially Private Data Synthesis Methods

When sharing data among researchers or releasing data for public use, there is a risk of exposing sensitive information of individuals in the data set. Data synthesis is a statistical disclosure limitation technique for releasing synthetic data sets with pseudo individual records. Traditional data synthesis techniques often rely on strong assumptions of a data intruder’s behaviors and background knowledge to assess disclosure risk. Differential privacy (DP) formulates a theoretical approach for a strong and robust privacy guarantee in data release without having to model intruders’ behaviors. Efforts have been made aiming to incorporate the DP concept in the data synthesis process. Here, we examine current DIfferentially Private Data Synthesis (DIPS) techniques for releasing individual-level surrogate data for the original data, compare the techniques conceptually and evaluate the statistical utility and inferential properties of the synthetic data via each DIPS technique through extensive simulation studies. Our work sheds light on the practical feasibility and utility of the various DIPS approaches, and suggests future research directions for DIPS.

97 MATHEMATICS AND COMPUTING↗

Native lattice strain induced structural earthquake in sodium layered oxide cathodes

Abstract High-voltage operation is essential for the energy and power densities of battery cathode materials, but its stabilization remains a universal challenge. To date, the degradation origin has been mostly attributed to cycling-initiated structural deformation while the effect of native crystallographic defects induced during the sophisticated synthesis process has been significantly overlooked. Here, using in situ synchrotron X-ray probes and advanced transmission electron microscopy to probe the solid-state synthesis and charge/discharge process of sodium layered oxide cathodes, we reveal that quenching-induced native lattice strain plays an overwhelming role in the catastrophic capacity degradation of sodium layered cathodes, which runs counter to conventional perception—phase transition and cathode interfacial reactions. We observe that the spontaneous relaxation of native lattice strain is responsible for the structural earthquake (e.g., dislocation, stacking faults and fragmentation) of sodium layered cathodes during cycling, which is unexpectedly not regulated by the voltage window but is strongly coupled with charge/discharge temperature and rate. Our findings resolve the controversial understanding on the degradation origin of cathode materials and highlight the importance of eliminating intrinsic crystallographic defects to guarantee superior cycling stability at high voltages.

25 ENERGY STORAGE↗