Search NASA⌕ Search

SEARCH · Search NASA

Results for “TELEVISION CAMERA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

The International Ultraviolet Explorer

The instrumentation and functioning of the IUE are discussed. The design of the telescope, fine error sensors, echelle spectrographs, and television cameras, as well as their integration, is described. The optical characteristics of the IUE are listed and the schematic arrangement of the detector is depicted. Sources of background noise are assessed, including the thermionic effects in the UV converters and television tubes, radiation from the earth's trapped electron belts, wide angle white light scattering from the earth and sun, scattering of dispersed light caused by low dispersion gratings, photometric calibration, and photometric stability. IUE sensitivity changes during the first three years of operation are shown together with sensitivity curves for short and long wavelengths. Modes of wavelength determination are considered.

Boggess, A.↗

Single-Fiber Optical Link For Video And Control

Single optical fiber carries control signals to remote television cameras and video signals from cameras. Fiber replaces multiconductor copper cable, with consequent reduction in size. Repeaters not needed. System works with either multimode- or single-mode fiber types. Nonmetallic fiber provides immunity to electromagnetic interference at suboptical frequencies and much less vulnerable to electronic eavesdropping and lightning strikes. Multigigahertz bandwidth more than adequate for high-resolution television signals.

Galloway, F. Houston↗

Television observations from Surveyor III

Surveyor III landed on the lunar surface at 00:04 GMT, on Day 110, 1967, approximately 23 hr after local sunrise on the Moon. The first pictures were taken by the television camera at 01:02 GMT. The camera was operated extensively for the first period of lunar visibility from the Goldstone Tracking Station of the Deep Space Network and, except on Day 115, on each successive Goldstone pass of the Moon until the Sun set over the Surveyor III landing site on Day 123. During this period, the Sun rose from an elevation angle of 11° in the east to within 3° of the zenith and then sank almost due west of the spacecraft. Many pictures were obtained of the illuminated eastern horizon in the period immediately preceding sunset. In addition to those received at the Goldstone Station, some were obtained at the Canberra, Australia, station of the Deep Space Network. There were 6315 television pictures taken during the first lunar day of the Surveyor III mission.

Surveyor III spacecraft↗

Security warning system monitors up to fifteen remote areas simultaneously

Security warning system consisting of 15 television cameras is capable of monitoring several remote or unoccupied areas simultaneously. The system uses a commutator and decommutator, allowing time-multiplexed video transmission. This security system could be used in industrial and retail establishments.

Fusco, R. C.↗

Surveyor III A preliminary report

Near the eastern shore of Oceanus Procellarum, 390 miles from Surveyor I, stands Surveyor III, now motionless and silent after a full lunar day's work during which the spacecraft transmitted to Earth 6315 photographs of its surroundings. A surface sampler, operated by command from the Earth and in view of Surveyor's television camera, conducted many tests of the character and structure of the lunar surface material, as well as digging four trenches. While Surveyor I put man's eyes on the Moon, Surveyor III added an arm and a hand with which to work. In this mission, Surveyor displayed remarkable adaptability and stability. Because the engines did not cut off before touchdown, the spacecraft in effect made three separate landings, giving information on surface bearing strength in several places. The spacecraft came to rest at an angle of about 14° from the vertical, well below the rim of a crater, making possible a detailed study of the floor and walls of a small lunar crater. The tilted position of the spacecraft also made it possible to obtain, for the first time from the surface of the Moon, photographs of a solar eclipse, and of the Earth in color. This report presents the preliminary findings from Surveyor III of the team of scientists and engineers of the Surveyor Program.

Surface property↗

Surveyor Project Final Report: Part 1 - Project Description and Performance, Volume 1

The Surveyor Project planned and conducted seven unmanned lunar missions for which spacecraft were launched between May 1966 and January 1968. Each of the spacecraft was successfully launched with the then newly developed Atlas/Centaur vehicle which utilized for the first time a high-specific-impulse, liquid hydrogen/liquid oxygen fueled stage. Five of the spacecraft successfully soft-landed and returned a great quantity of engineering and scientific data on extensive postlanding operations, accomplishing all mission and project objectives. Four of the spacecraft soft-landed at selected mare sites to provide data which were required to support the Apollo Program. The final spacecraft was then successfully used for scientific investigation of a contrasting site in the rugged lunar highlands. Surveyor was a fully attitude-stabilized spacecraft designed to receive and execute a wide variety of earth commands, as well as to perform certain automatic functions including the critical terminal-descent and soft-landing sequences. Significant new and advanced subsystems that were developed and/or used in combination to enable Surveyor to execute the complex terminal phase of flight were: (1) a solid-propellant main retro motor, (2) throttlable liquid-propellant vernier engines (also used for midcourse velocity correction), (3) highly sensitive velocity- and altitude-sensing radars, and (4) an automatic closed-loop guidance and control system. The first Surveyor spacecraft carried a survey television camera which, together with other engineering instrumentation, obtained in-flight and postlanding data. The complement of instruments carried on later missions included various combinations of the following additional devices: (1) a soil mechanics/surface sampler instrument for picking, digging, and handling lunar surface material; (2) an alpha scattering instrument for performing a chemical analysis of the lunar surface material; and (3) magnets attached to the spacecraft for determining magnetic properties of the soil.

Jet Propulsion Laboratory↗

Surveyor Project Final Report: Part 1 - Project Description and Performance, Volume 2

The Surveyor Project planned and conducted seven unmanned lunar missions for which spacecraft were launched between May 1966 and January 1968. Each of the spacecraft was successfully launched with the then newly developed Atlas/Centaur vehicle which utilized for the first time a high-specific-impulse, liquid hydrogen/liquid oxygen fueled stage. Five of the spacecraft successfully soft-landed and returned a great quantity of engineering and scientific data on extensive postlanding operations, accomplishing all mission and project objectives. Four of the spacecraft soft-landed at selected mare sites to provide data which were required to support the Apollo Program. The final spacecraft was then successfully used for scientific investigation of a contrasting site in the rugged lunar highlands. Surveyor was a fully attitude-stabilized spacecraft designed to receive and execute a wide variety of earth commands, as well as to perform certain automatic functions including the critical terminal-descent and soft-landing sequences. Significant new and advanced subsystems that were developed and/or used in combination to enable Surveyor to execute the complex terminal phase of flight were: (1) a solid-propellant main retro motor, (2) throttlable liquid-propellant vernier engines (also used for midcourse velocity correction), (3) highly sensitive velocity- and altitude-sensing radars, and (4) an automatic closed-loop guidance and control system. The first Surveyor spacecraft carried a survey television camera which, together with other engineering instrumentation, obtained in-flight and postlanding data. The complement of instruments carried on later missions included various combinations of the following additional devices: (1) a soil mechanics/surface sampler instrument for picking, digging, and handling lunar surface material; (2) an alpha scattering instrument for performing a chemical analysis of the lunar surface material; and (3) magnets attached to the spacecraft for determining magnetic properties of the soil.

Jet Propulsion Laboratory↗

Neutron-image intensifier

Electronic intensifier tube with a demagnification ratio of 9-1 enhances the usefulness of neutron-radiographic techniques. A television signal can be obtained by optical coupling of a small-output phosphor-light image to a television camera.

Berger, H.↗

Television research

Model of solid state television camera without imaging tube and using mosaic of phototransistors

Huggins, C. T.↗

Hand-held photomicroscopy system

Photomicroscopy system, with simple optics and any standard microscope objective, is used with any type of motion picture, still, or television camera system. Device performs well under difficult environmental conditions and applies to work in ecological studies, field hospitals, and geological surveys.

Zabower, H. R.↗

Lunar surface navigation analysis

The accuracy of the crew position obtained by using a line-of-sight device such as a sun compass or the rover television camera and the prominent mountains such as Hadley and Hadley delta was investigated. It was determined that with errors of 1 deg (noise only), the crew position can be obtained to sigma sub phi = 850 feet and sigma sub lambda = 400 feet using Hadley and Hadley delta. The addition of West Mountain reduced the errors to 600 and 400 feet, respectively.

Savely, R. T.↗

Velocity dispersions in galaxies: 1: The SO galaxy NGC 7332

A Coude spectrum of the SO galaxy NGC 7332 with 0.9 A resolution from 4186 to 4364 A was obtained with the SEC vidicon television camera and the Hale telescope. Comparisons with spectra of G and K giant stars, numerically broadened for various Maxwellian velocity distributions, give a dispersion velocity in the line of sight of 160 + or - 20 km/sec with the best fit at G8III. The dispersion appears to be constant within + or - 35 km/sec out to 1.4 kpc (H = 100 km/sec/mpc). After correction for projection, the rotation curve has a slope of 0.16 km/sec/pc at the center and a velocity of 130 km/sec at 1.4 kpc where it is still increasing. For an estimated effective radius of 3.5 kpc enclosing half the light, the virial theorem gives a mass of 1.4 x 10 to the 11th power solar masses if the mass-to-light ratio is constant throughout the galaxy. The photographic luminosity is 8.3 x 10 to the 9th power solar luminosities so that the M/L ratio is 17.

Morton, D. C.↗

Meteoroid activity on the lunar surface from the Surveyor 3 sample examination

The Surveyor 3 television camera shroud and polished aluminum tube, retrieved as a result of the Apollo 12 mission after 2-1/2 years on the lunar surface, were examined at the NASA Manned Spacecraft Center for evidence of meteoroid impact. The results of this examination were compared with other estimates of the meteoroid flux in the lunar vicinity and are shown to be in good agreement with the Lunar Orbiter penetration rates. In addition, the relationship between a derived lunar surface meteoroid cumulative-flux model and the comparable near-earth model is discussed in the light of theoretical predictions. It is shown that the effect of the gravitational field of the earth on the near-earth environment was greater than previously predicted. The implication is that the average meteoroid velocity relative to the earth is probably 17 km/s. The many low velocity impacts on the Surveyor 3 camera and tube are shown to be of lunar surface origin and to be primarily the result of rocket exhaust interaction.

Cour-Palais, B. G.↗

Data user's note: Mariner 6 and 7 photographic data (NSSDC ID no. 69-014A-01 and 69-030A-01

The availability and assistance in the use of the complete set of Mariner 6 and 7 (1969 14A and 1969 20A) pictorial data are announced. The announcement describes the photographic mission of these Mariner spacecrafts, the television camera system, and the photographs that are available from the National Space Data Center. Two appendixes are included: one is a photographic catalog of all enhanced photographs, designated the maximum discriminability photographs; the other is a series of computer produced graphics that are useful in detailed analysis of the photographs.

Anderson, A. T.↗