Search NASA⌕ Search

SEARCH · Search NASA

Results for “TEMPERATURE INDICATOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Far-infrared observations of a luminous dust-shrouded source in the nucleus of NGC 4945

High-resolution far-infrared observations of the galaxy NGC 4945 have been obtained from the Kuiper Airborne Observatory. Using new observational techniques and nonlinear deconvolution routines, it is found that virtually all of the far-infrared luminosity originates from a nuclear source no larger than 12 arcsec x 9 arcsec (225 pc x 170 pc) in extent. This size constraint, coupled with the far-infrared dust temperature, indicates that the source is deeply embedded in dust: the lower limit for the 100 micron optical depth is 0.35, which is by far the largest yet measured in an external galaxy. Published optical spectra of NGC 4945 reveal a heavily obscured nonthermal source which exhibits broad line profiles typical of a Seyfert 2 active nucleus; it is concluded that the far-infrared emission is probably due to thermal radiation from dust grains surrounding the nonthermal nuclear source. A compact cluster of massive young stars may also contribute to the infrared luminosity, but the evidence for such star-forming activity is weak.

Brock, David↗

Temporal trends and transport within and around the Antarctic polar vortex during the formation of the 1987 Antarctic ozone hole

During AAOE in 1987 an ER-2 high altitude aircraft made twelve flights out of Punta Arenas, Chile (53 S, 71 W) into the Antarctic polar vortex. The aircraft was fitted with fast response instruments for in situ measurements of many trace species including O3, ClO, BrO, NO sub y, NO, H2O, and N2O. Grab samples of long-lived tracers were also taken and a scanning microwave radiometer measured temperatures above and below the aircraft. Temperature, pressure, and wind measurements were also made on the flight tracks. Most of these flights were flown to 72 S, at a constant potential temperature, followed by a dip to a lower altitude and again assuming a sometimes different potential temperature for the return leg. The potential temperature chosen was 425 K (17 to 18 km) on 12 of the flight legs, and 5 of the flight legs were flown at 450 K (18 to 19 km). The remaining 7 legs of the 12 flights were not flown on constant potential temperature surfaces. Tracer data have been analyzed for temporal trends. Data from the ascents out of Punta Arenas, the constant potential temperature flight legs, and the dips within the vortex are used to compare tracer values inside and outside the vortex, both with respect to constant potential temperature and constant N2O. The time trend during the one-month period of August 23 through September 22, 1987, shows that ozone decreased by 50 percent or more at altitudes form 15 to 19 km. This trend is evident whether analyzed with respect to constant potential temperature or constant N2O. The trend analysis for ozone outside the vortex shows no downward trend during this period. The analysis for N2O at a constant potential temperature indicates no significant trend either inside or outside the vortex; however, a decrease in N2O with an increase in latitude is evident.

Proffitt, M. H.↗

Simulation and diagnosis of water vapor imagery with mesoscale model output

The present simulation of 6.7-micron channel water vapor imagery employs March 6-7, 1982 soundings from the Limited Area Mesoscale Prediction System (LAMPS) mesoscale model as inputs to a radiative transfer scheme. A comparison of model-generated and observed brightness temperatures indicates that LAMPS was able to replicate major features of the VAS imagery, including the pronounced warm, dry development streak and a cold cloud area. The model was not, however, able to resolve such finer-scaled details as the double structure of the development portion of the streak.

Muller, Bradley M.↗

The thermal performance of heat pipes with localized heat input

The performance of heat pipes with localized heat input including the effects of axial and circumferential heat conduction under high and low working temperatures is investigated. The numerical results show that when heat pipes are spot heated, the peak temperature of the wall is greatly reduced and the surface can be protected from being burned out by the high heat flux. The boiling limitation becomes the most important limitation for this type of heat pipe. Numerical results for block heating a heat pipe with low working temperatures indicate a good agreement with existing experimental data. It is also shown that most of the input heat passes through the wall beneath the heated block.

Cao, Yiding↗

Modulated-splitting-ratio fiber-optic temperature sensor

A fiber-optic temperature sensor is described that uses a small silicon beamsplitter whose splitting ratio varies as a function of temperature. A four-beam technique is used to measure the sensor's temperature-indicating splitting ratio. This referencing method provides a measurement that is largely independent of the transmission properties of the sensor's optical fiber link. A significant advantage of this sensor, relative to other fiber-optic sensors, is its high stability, which permits the fiber-optic components to be readily substituted, thereby simplifying the sensor's installation and maintenance.

Beheim, Glenn↗

Analysis of coolant flow and heat transfer in the SSME HPOTP Number 4 bearing assembly

The PHOENICS code has been applied to simulate the flow of liquid oxygen through the number 4 ball bearing assembly of the Space Shuttle Main Engine High-Pressure Oxidizer Turbopump. The Body-Fitted Coordinate system capability of PHOENICS was utilized to create a geometrically accurate model. Effects accounted for by the model include the rotation rate of the calculation domain, viscous heating in the liquid oxygen and two-phase effects due to LOX boiling. A separation program was used to account for conduction within a ball bearing element which was coupled with the PHOENICS flow and heat transfer analysis. Solutions have been obtained for the velocity and temperature fields within the LOX coolant and the temperature within the ball element. The predicted ball temperatures indicate that the coolant is boiling in the region near the ball surface.

Owens, S. F.↗

Heating and cooling of the earth's plasma sheet

Magnetic-field models based on pressure equilibrium in the quiet magnetotail require nonadiabatic cooling of the plasma as it convects inward or a decrease of the flux tube content. Recent in situ observations of plasma density and temperature indicate that, during quiet convection, the flux tube content may actually increase. Thus the plasma must be cooled during quiet times. The earth plasma sheet is generally significantly hotter after the expansion phase of a substorm than before the plasma sheet thinning begins and cools during the recovery phase. Heating mechanisms such as reconnection, current sheet acceleration, plasma expansion, and resonant absorption of surface waves are discussed. It seems that all mechanisms are active, albeit in different regions of the plasma sheet. Near-earth tail signatures of substorms require local heating as well as a decrease of the flux tube content. It is shown that the resonant absorption of surface waves can provide both.

Goertz, C. K.↗

A preliminary analysis of the covariation of surface and midtropospheric temperatures

Monthly, seasonal, and annual averages of surface temperatures and midtropospheric (850-300 hPa) layer-mean temperatures for a global network of 100 stations are analyzed for the periods 1950-87 and 1979-88. The periods were selected on the basis of available data products. A preliminary analysis of the covariation between surface temperatures and midtroposphere layer-mean temperatures indicates a strong correlation in the winter hemispheres over midlatitudes and a much weaker correlation in most of the tropics. Results are compared with other in-situ data sets and with satellite Microwave Sounding Unit (MSU) data.

Elms, Joe D.↗

The 27-28 October 1986 FIRE IFO cirrus case study - Spectral properties of cirrus clouds in the 8-12 micron window

Lidar and radiometric observations are employed for detecting the presence of cirrus and describing their radiative properties. The study focuses on observations of the radiative properties of cirrus clouds within the 8-12 micron spectral region. The instrumentation that achieved the spectral radiance observations used in this study is described. Results are presented for October 28, 1986 FIRE case study day in terms of brightness temperature differences, cirrus effective emissivities, and the gross microphysical characteristics of the observed clouds. The HIS and lidar observations were combined to derive the spectral effective beam emissivity of the cirrus clouds. Fifty percent of clouds on this day displayed a spectral variation of effective beam emissivity from 2-10 percent. These differences, in conjunction with large differences in the HIS observed brightness temperatures, indicate that cirrus clouds cannot be considered gray in the 8-12 micron region. Also, the derived spectral transmittance of the cloud is used to infer the effective radii of the particle size distribution.

Ackerman, Steven A.↗

H(+) - O(+) two-stream interaction on auroral field lines

Upflowing beams of hydrogen, oxygen, and minor ion species, and downward accelerated electrons have been observed above several thousand kilometers altitude on evening auroral field lines. The mechanism for electron and ion acceleration is generally accepted to be the presence of a quasi-static electric field with a component parallel to the earth's magnetic field. The thermal energy of the observed beams is much larger than ionospheric ion temperatures indicating that the beams have been heated as they are accelerated upward. This heating is probably due to a two-stream interaction between beams of different mass ions. The beams gain equal energy in the potential drop and so have different average velocities. Their relative streaming initiates an ion-ion two-stream interaction which then mediates a transfer of energy and momentum between the beams and causes thermalization of each beam. The qualitative evidence that supports this scenario is reviewed. Properties of the two-stream instability are presented in order to demonstrate that a calculation of the evolution of ion beams requires a model that includes field-aligned spatial structure.

Bergmann, Rachelle↗

Synthesis and superconducting properties of Tl-Ba-Ca-Cu-O films

Tl-Ba-Ca-Cu-O superconducting films were synthesized by sputtering either from a single target or from two oxide targets in a symmetric configuration. Films with zero resistance Tc of up to 122 K were obtained after various postannealing treatments at 870-950 C under an oxygen atmosphere. The composition of the films is not very homogeneous on the submicrometer scale. The critical current of these films at 77 K is in the 1000 A/sq cm to 10,000 A/sq cm range, which is much smaller than that of films prepared on SrTiO3 and LaAlO3 substrates. The low critical current density in these films is probably due to the granularity in the films. The morphology, structure, and magnetic and superconducting properties of the films were studied. Films prepared by two different sputtering techniques have similar results which depend mostly on the film compositions and their annealing conditions. It is found that the induced magnetic flux in the film decreases rapidly with increasing temperature, indicating weak flux pinning.

Liou, S. H.↗

Ultrafast IR detector response in high Tc superconducting thin films

The response from a high Tc superconducting multielement optical detector made of a laser deposited Y-Ba-Cu-O thin film has been evaluated. Several microscopic and spectroscopic techniques were used to establish the presence of the correct phase of the thin film. Optical pulses from a laser diode at 830 nm and from a Q-switched CO2-laser at 10.6 microns were used. The detector responded to 50 ps (FWHM) pulses. A comparison between dR/dT of the film and the response amplitude as a function of temperature indicated a bolometric response.

Lindgren, Mikael↗

High Tc superconducting IR detectors from Y-Ba-Cu-O thin films

A thin-film high-Tc superconducting multielement optical detector made of Y-Ba-Cu-O has been designed and evaluated using optical pulses from a diode laser (830 nm) and a Q-switched CO2-laser (10.6 microns). Different thin films have been tested. A laser deposited film showed the strongest response amplitude for short pulses and responded to an ultrafast, 50 ps wide pulse. Comparisons between dR/dT and response as a function of temperature indicated, however, a bolometric response.

Lindgren, M.↗

Thermal degradation study of silicon carbide threads developed for advanced flexible thermal protection systems

Silicon carbide (SiC) fiber is a material that may be used in advanced thermal protection systems (TPS) for future aerospace vehicles. SiC fiber's mechanical properties depend greatly on the presence or absence of sizing and its microstructure. In this research, silicon dioxide is found to be present on the surface of the fiber. Electron Spectroscopy for Chemical Analysis (ESCA) and Scanning Electron Microscopy (SEM) show that a thin oxide layer (SiO2) exists on the as-received fibers, and the oxide thickness increases when the fibers are exposed to high temperature. ESCA also reveals no evidence of Si-C bonding on the fiber surface on both as-received and heat treated fibers. The silicon oxide layer is thought to signal the decomposition of SiC bonds and may be partially responsible for the degradation in the breaking strength observed at temperatures above 400 C. The variation in electrical resistivity of the fibers with increasing temperature indicates a transition to a higher band gap material at 350 to 600 C. This is consistent with a decomposition of SiC involving silicon oxide formation.

Tran, Huy Kim↗

Comparisons of observed ozone and temperature trends in the lower stratosphere

One result of the ozone assessment (WMO, 1989) is that there is a significant negative ozone trend in the lower stratosphere and upper troposphere from 1970 through 1986. The relationship of this trend in ozone to that of temperature in the same altitude region is examined utilizing a 62-station set of rawinsonde data, and the results are compared to the changes in temperature determined from a radiative equilibrium model calculation. The calculated and observed trends in lower stratospheric temperature indicate substantial agreement in the shape and magnitude of the vertical profiles.

Miller, A. J.↗

Electrode performance parameters for a radioisotope-powered AMTEC for space power applications

The alkali metal thermoelastic converter (AMTEC) is a device for the direct conversion of heat to electricity. Recently a design of an AMTEC using a radioisotope heat source was described, but the optimum condenser temperature was hotter than the temperatures used in the laboratory to develop the electrode performance model. Now laboratory experiments have confirmed the dependence of two model parameters over a broader range of condenser and electrode temperatures for two candidate electrode compositions. One parameter, the electrochemical exchange current density at the reaction interface, is independent of the condenser temperature, and depends only upon the collision rate of sodium at the reaction zone. The second parameter, a morphological parameter, which measures the mass transport resistance through the electrode, is independent of condenser and electrode temperatures for molybdenum electrodes. For rhodium-tungsten electrodes, however, this parameter increases for decreasing electrode temperature, indicating an activated mass transport mechanism such as surface diffusion.

Underwood, M. L.↗

An IRAS survey of Galactic supernova remnants

A new independent survey of the IR emission for 161 Galactic supernova remnants are presented on the basis of Skyflux image data from the Infrared Astronomical Satellite. A new Galactic rotation curve with current IAU constants, R0 = 8.5 kpc and V0 = 220 km/s, is used to derive new kinematic distances for 11 of the 44 positively or possibly identified remnants. Temperature-sensitive flux ratio images are employed to help identify and define remnant emission structures and fluxes, particularly in complex regions. Of the 161 remnants examined, clear IR emission from 35 was found, with nine additional possible detections. Almost all young remnants (Tycho, Kepler, Cas A, Crab) were found to have a significant 12- and 25-micron flux, while older remnants are brightest at 60 and 100 microns. Correlations with mass and temperature indicate that older remnants are both colder and more massive, as expected from decreasing velocity. No radius-luminosity correlation was seen.

Saken, Jon M.↗

Numerical simulation of a low-emission gas turbine combustor using KIVA-II

A modified version of the KIVA-II code was used to obtain a multidimensional numerical solution for the turbulent two-phase chemically reacting flows inside a staged turbine combustor (STC). The STC under consideration is equipped with an advanced airblast fuel nozzle and encompasses a fuel nozzle (FN), a rich-burn (RB) zone, a converging connecting pipe, a quick-quench (QQ) zone, a diverging connecting pipe, and a lean-combustion (LC) zone. The STC was divided into two subsystems, namely, FN/RB zone and QQ/LC zones, and the numerical solutions were obtained separately for each subsystem. Preliminary data characterize the major features of the flow and temperature fields inside the STC. Information on velocity, temperature, and some critical species in the FN/RB zone is presented. In the QQ/LC zones, formation of the co- and counter-rotating bulk flow and the sandwiched-ring-shaped temperature field can be clearly seen. The calculations of the mass-weighted standard deviation and the pattern factor of temperature indicated that the mixing performance of the STC is very promising.

Yang, S. L.↗