Search NASA⌕ Search

SEARCH · Search NASA

Results for “THIRD STAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1960

Vacancy-Vacancy Interaction in Copper

The binding energy of two vacancies in a static lattice as a function of their separation and the positions of their displaced neighboring atoms has been calculated using a Morse potential function model for copper. It was found that two vacancies attract one another at separation less than about 7 A. At separations greater than 7 A the vacancies do not interact appreciably. The most stable separation was found to be the first nearest- neighbor separation or the divacancy configuration, for which the binding energy was found to be 0.64 ev. Based on these calculations, it is shown that third-stage annealing in irradiated copper may be accounted for by divacancy migration. The role of the divacancy in copper self-diffusion is also explained.

Girifalco, L. A.↗
NASA NTRS1972

Shuttle/Agena study. Volume 2, part 1: Program requirements, conclusions, recommendations

An evaluation to determine the compatibility of the Agena with the space transportation system for use as an expendable third stage to the space shuttle was conducted. The Agena was considered for those missions requiring additional propulsion capability beyond that used for low earth orbit. The study defines the interface requirements imposed on both the Agena and the shuttle system and identifies those areas where the Agena must be improved or modified to satisfy mission requirements.

Source record↗
NASA NTRS1972

Skylab status report.

The laboratory will be launched on Apr. 30, 1973, aboard a Saturn V vehicle. Approximately twenty-three and a half hours later the first crew will be launched in a command and service module aboard a Saturn IB launch vehicle. The laboratory will consist of modules. The orbital workshop (OWS) is made from the liquid oxygen and liquid hydrogen tanks of a Saturn S-IVB third stage. The OWS contains the living quarters and two experiments areas. The airlock sits on top of the OWS and contains the controls and hatch for the extra-vehicular activity.

Conrad, C., Jr.↗
NASA NTRS1972

Analysis of space tug operating techniques (study 2.4). Volume 1: Executive summary

The costs of tug refurbishment were studied, using existing cost estimating relationships, to establish the cost of maintaining the reusable third stage of the space transportation system. Refurbishment operations sheets which describe the actual tasks that are necessary to keep the equipment functioning properly were used along with refurbishment operations sheets which contain all of the pertinent descriptive information for each of the major vehicle areas. Tug refurbishment costs per mission are tabulated.

Source record↗
NASA NTRS1973

Space transportation and destination considerations for extraterrestrial disposal of radioactive waste

A feasibility study is summarized of extraterrestrial (space) disposal of radioactive waste. The initial work on the evaluation and comparison of possible space destinations and launch vehicles is reported. Only current or planned space transportation systems were considered. The currently planned space shuttle was found to be more cost effective than current expendable launch vehicles, by about a factor of two. The space shuttle will require a third stage to perform the disposal missions. Depending on the particular mission this could be either a reusable space tug or an expendable stage such as a Centaur. Of the destinations considered, high earth orbits (between geostationary and lunar orbit altitudes), solar orbits (such as a 0.90 AU circular solar orbit) or a direct injection to solar system escape appear to be the best candidates. Both earth orbits and solar orbits have uncertainties regarding orbit stability and waste package integrity for times on the order of a million years.

Zimmerman, A. V.↗
NASA NTRS1973

Infectivity and egg production of Nematospiroides dubius as affected by space flight and ultraviolet irradiation

Nematospiroides dubius was tested to determine the infective potential of the third stage larvae and the egg-production and egg-viability rates of the resulting adults after they are exposed to space flight and solar ultraviolet irradiation. The results are indicative that space-flown larvae exposed to solar ultraviolet irradiation were rendered noninfective in C57 mice, whereas flight control larvae that received no solar ultraviolet irradiation matured at the same rate as the ground control larvae. However, depressed egg viability was evident in the flight control larvae.

Long, R. A.↗
NASA NTRS1973

Representative Space Shuttle missions and their impact on shuttle design.

Four representative Space Shuttle missions for the 1980's are described: mission 1, a third stage deployment and retrieval mission; mission 2, a combination orbiting element revisit and sortie mission; mission 3, a rapid payload retrieval and return mission; and mission 4, a 30-day earth observation sortie mission. The first three missions are proposed baseline reference missions, and, as such, their mission requirements must be met by the baseline shuttle configuration developed by NASA contractors. Typically, these missions impact the design in terms of such basics as shuttle launch payload capability, payload bay size, performance of the orbital maneuvering system (OMS) and the reaction control system (RCS), the basic 7-day orbital system lifetime, and the thermal protection system for high cross-range entry. To illustrate that vehicle design may be subject to requirements from other mission types as well, mission 4 is included. Each description stresses mission requirements having unique impact on vehicle design.

Young, K. A.↗
NASA NTRS1975

Some unusual oscillating bearing applications in liquid propellant rocket engines

Liquid propellant rocket engines have some unique applications for highly loaded oscillating-motion bearings operating at cryogenic temperatures and vacuum environment conditions. Among these are (1) thrust attitude control gimbal bearings that permit pivoting of the entire rocket engine and (2) bearings in the linkages of ducting bellows joints that articulate when the engine gimbals. The main rocket engines for first, second, and third stages of the Saturn vehicle have thrust vector control gimbals which use PTFE liner bearing materials and ducting linkage bearings using solid film dry lubricants, both to reduce friction and provide required wear life. Data on the frictional and wear characteristics of these materials, while operating under varying temperature and atmospheric pressure conditions, are presented. A discussion of the bearing designs for flexible bellows joint linkages is also presented.

Daniels, C. M.↗
NASA NTRS1976

An oxide dispersion strengthened Ni-W-Al alloy with superior high temperature strength

An experimental oxide dispersion strengthened (ODS) alloy, WAZ-D, derived from the WAZ-20 composition was produced by the mechanical alloying process. Cast WAZ-20 is strengthened by both a high refractory metal content, and 70 volume percent of gamma prime. The ODS alloy WAZ-D was responsive to variables of alloy content, of attritor processing, of consolidation by extrusion, and of heat treatment. The best material produced had large highly elongated grains. It exhibited tensile strengths generally superior to a comparable cast alloy. The ODS alloy exhibited high temperature stress rupture life considerably superior to any known cast superalloy. Tensile and rupture ductility were low, as was intermediate temperature rupture life. Very low creep rates were noted and some specimens failed with essentially no third stage creep. Also the benefit derived from the oxide dispersion, far out-weighed that from the elongated microstructure alone.

Glasgow, T. K.↗
NASA NTRS1977

An active nutation damper for spacecraft

An active nutation damping device, consisting of an angular accelerometer, a dc motor driven flywheel, and associated electronics, was developed for spacecraft use. This damping system was used on the Lageos spacecraft, launched 4 May 1976, to control nutation buildup during the long coast period after the third stage separation. Of many electrical and mechanical design choices, an angular rather than linear accelerometer offered some advantages but problems developed in adapting the angular accelerometer to spacecraft use. The damper package was evaluated and proven on a three axis gas-bearing simulator that duplicated the Lageos spacecraft critical flight dynamics. A failure analysis of the damper assembly was performed. Performance of the damper during the Lageos flight has confirmed the preflight evaluation and analysis.

Abercrombie, R. A.↗
NASA NTRS1977

An active nutation damper for spacecraft

An active nutation damping device, consisting of an angular accelerometer, a dc-motor-driven flywheel, and associated electronics, developed for spacecraft use is described. This damping system was used on the LAGEOS spacecraft to control nutation buildup during the long coast period (approximately 75 minutes) after the third stage separation. The damper package was evaluated and proven on a three-axis gas-bearing simulator that duplicated the LAGEOS spacecraft critical flight dynamics. In addition, a failure analysis of the damper assembly was performed. Performance of the damper during the LAGEOS flight has confirmed the preflight evaluation and analysis.

Abercrombie, R. A.↗
NASA NTRS1978

An investigation of the side force that is sometimes observed in rocket start-up

The occurrence of a large but momentary side force during the start-up of rocket motors employing convergent-divergent nozzles has been noted occasionally. Asymmetric flow separation within the divergent section of the nozzle is proposed as the principal source of this lateral force. A method for estimating this force and its concomitant lateral impulse is outlined, and results obtained by applying the method to Scout vehicle first-, second-, and third-stage rocket motor start-ups are presented and compared with similar estimates that other researchers obtained by a different method.

Bowyer, J. M., Jr.↗
NASA NTRS1978

Strain gage system evaluation program

A program was conducted to determine the reliability of various strain gage systems when applied to rotating compressor blades in an aircraft gas turbine engine. A survey of current technology strain gage systems was conducted to provide a basis for selecting candidate systems for evaluation. Testing and evaluation was conducted in an F 100 engine. Sixty strain gage systems of seven different designs were installed on the first and third stages of an F 100 engine fan. Nineteen strain gage failures occurred during 62 hours of engine operation, for a survival rate of 68 percent. Of the failures, 16 occurred at blade-to-disk leadwire jumps (84 percent), two at a leadwire splice (11 percent), and one at a gage splice (5 percent). Effects of erosion, temperature, G-loading, and stress levels are discussed. Results of a post-test analysis of the individual components of each strain gage system are presented.

Dolleris, G. W.↗
NASA NTRS1977

An active nutation damper for spacecraft

An active nutation damping device, consisting of an angular accelerometer, a dc-motor-driven flywheel, and associated electronics, was developed for spacecraft use. This damping system was used on the LAGEOS spacecraft, launched May 4, 1976, to control nutation buildup during the long coast period (approximately 75 minutes) after the third stage separation. Of the many electrical and mechanical design choices involved, the use of an angular rather than linear accelerometer offers some advantages. There are some problems of adapting the angular accelerometer to spacecraft use. The damper package was evaluated and proven on a three-axis gas-bearing simulator that duplicated the LAGEOS spacecraft critical flight dynamics. A failure analysis of the damper assembly was performed.

Abercrombie, R. A.↗