Search NASA⌕ Search

SEARCH · Search NASA

Results for “TIME VARYING DELAYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Improvements and validation of the erythropoiesis control model for bed rest simulation

The most significant improvement in the model is the explicit formulation of separate elements representing erythropoietin production and red cell production. Other modifications include bone marrow time-delays, capability to shift oxyhemoglobin affinity and an algorithm for entering experimental data as time-varying driving functions. An area of model development is suggested by applying the model to simulating onset, diagnosis and treatment of a hematologic disorder. Recommendations for further improvements in the model and suggestions for experimental application are also discussed. A detailed analysis of the hematologic response to bed rest including simulation of the recent Baylor Medical College bed rest studies is also presented.

Leonard, J. I.↗
NASA NTRS1991

A correlational analysis of the effects of changing environmental conditions on the NR atomic hydrogen maser

An extensive statistical analysis has been undertaken to determine if a correlation exists between changes in an NR atomic hydrogen muser's frequency offset and changes in environmental conditions. Data have been acquired over the past 20 months by recording the frequency offset of three NR atomic hydrogen masers along with the relative and absolute humidity, barometric pressure, and ambient temperature of the laboratory in which the masers are maintained. Correlational analyses have been performed comparing barometric pressure, humidity, and temperature with maser frequency offset as functions of time for periods ranging from 5.5 to 17 days. Semi partial correlation coefficients as large as -0.9 have been fond between barometric pressure and maser frequency offset for data covering periods as long as a week. Maser frequency offset and barometric pressure were consistently found to change simultaneously. The correlation between humidity and frequency offset is less predictable, and the resulting semi partial correlation coefficients were usually small when compared with those derived from the relationship between pressure and frequency offset. The time delay between changes in humidity and correlated changes in maser frequency offset was found to vary extensively with no predictable pattern. Analysis of temperature data indicates that, in the most current design, temperature does not significant(y affect maser frequency offset in the laboratory environment. Thus, the results of the analyses disclose a significant statistical correlation between changes in maser frequency offset and changes in barometric pressure. The statistics also reveal some correlation between humidity and frequency offset, bat for reasons to be discussed, the effects of humidity should be considered secondary to the effects of changing barometric pressure.

R. A. Dragonette↗
NASA NTRS1989

Active Control of the Forced and Transient Response of a Finite Beam

When studying structural vibrations resulting from a concentrated source, many structures may be modelled as a finite beam excited by a point source. The theoretical limit on cancelling the resulting beam vibrations by utilizing another point source as an active controller is explored. Three different types of excitation are considered, harmonic, random, and transient. In each case, a cost function is defined and minimized for numerous parameter variations. For the case of harmonic excitation, the cost function is obtained by integrating the mean squared displacement over a region of the beam in which control is desired. A controller is then found to minimize this cost function in the control interval. The control interval and controller location are continuously varied for several frequencies of excitation. The results show that control over the entire beam length is possible only when the excitation frequency is near a resonant frequency of the beam, but control over a subregion may be obtained even between resonant frequencies at the cost of increasing the vibration outside of the control region. For random excitation, the cost function is realized by integrating the expected value of the displacement squared over the interval of the beam in which control is desired. This is shown to yield the identical cost function as obtained by integrating the cost function for harmonic excitation over all excitation frequencies. As a result, it is always possible to reduce the cost function for random excitation whether controlling the entire beam or just a subregion, without ever increasing the vibration outside the region in which control is desired. The last type of excitation considered is a single, transient pulse. A cost function representative of the beam vibration is obtained by integrating the transient displacement squared over a region of the beam and over all time. The form of the controller is chosen a priori as either one or two delayed pulses. Delays constrain the controller to be causal. The best possible control is then examined while varying the region of control and the controller location. It is found that control is always possible using either one or two control pulses. The two pulse controller gives better performance than a single pulse controller, but finding the optimal delay time for the additional controllers increases as the square of the number of control pulses.

Post, John Theodore↗
NASA NTRS1961

X-15 propulsion subsystem component development

The X-15 rocket-powered research aircraft was developed by the integrated effort of various areas such as aerodynamics, thermodynamics, and structures. The propulsion subsystem development at the onset of the program was handicapped for varied causes. As a result, early in the flight testing phase, many time-consuming and costly delays were encountered as a result of individual component failures. A review of the X-15 propulsion subsystem components is presented, with a discussion of some of the development problems, how they were alleviated, and how they may be reduced or avoided in future programs. In order to avoid these problems in the future, a program is recommended in the hope that it will increase component reliability commensurate with vehicle objectives.

Robert L. Wiswell↗
NASA NTRS1981

A broadband RF continuously variable time delay device

A method for implementation of continuously variable time delay of broadband RF signals is described. The method uses Bragg Cell and optical heterodyne technology. The signal to be delayed is applied to the Bragg Cell acoustic transducer, and the delay time is the acoustic transit time from this transducer to the incident light beam. By translating the light beam, the delay is varied. Expressions describing the Bragg Cell diffraction, lens Fourier transformation, and the optical heterodyne processes are developed. Specifications for the variable delay including bandwidth, range of delay, and insertion loss are provided. Applications include radar signal processing, spread spectrum intercept, radar ECM, and adaptive array antenna processing.

Freyre, F. W.↗
NASA NTRS1973

Transient boiling heat transfer in saturated liquid nitrogen and F113 at standard and zero gravity

Transient and steady state nucleate boiling in saturated LN2 and F113 at standard and near zero gravity conditions were investigated for the horizontal up, vertical and horizontal down orientations of the heating surface. Two distinct regimes of heat transfer mechanisms were observed during the interval from the step increase of power input to the onset of nucleate boiling: the conduction and convection dominated regimes. The time duration in each regime was considerably shorter with LN2 than with F113, and decreased as heat flux increased, as gravity was reduced, and as the orientation was changed from horizontal up to horizontal down. In transient boiling, boiling initiates at a single point following the step increase in power, and then spreads over the surface. The delay time for the inception of boiling at the first site, and the velocity of spread of boiling varies depending upon the heat flux, orientation, body force, surface roughness and liquid properties, and are a consequence of changes in boundary layer temperature levels associated with changes in natural convection. Following the step increase in power input, surface temperature overshoot and undershoot occur before the steady state boiling temperature level is established.

Oker, E.↗
NASA NTRS2015

MHD Model Results of Solar Wind Plasma Interaction with Mars and Comparison with MAVEN Observations

The crustal remnant field on Mars rotates constantly with the planet, varying the magnetic field configuration interacting with the solar wind. It has been found that ion loss rates slowly vary with the subsolar longitude, anticorrelating with the intensity of the dayside crustal field source, with some time delay, using a time-dependent multispecies MHD model. In this study, we investigate in detail how plasma properties are influenced locally by the crustal field and its rotation. Model results will be compared in detail with plasma observations from MAVEN.

Crustal↗
DOE OSTI2021

Measurement of neutral gadolinium oscillator strengths using dual-comb absorption spectroscopy in laser-produced plasmas

The oscillator strengths of 43 transitions of neutral gadolinium from 530 to 535 nm were determined based on high-resolution absorption spectra measured by probing a laser-produced plasma (LPP) using time-resolved dual-comb spectroscopy (DCS). Absorption spectra were measured at various time delays, ranging from 33 to 252 µs after the onset of the plasma formation, over which the temperature and number density varied as the ablation plume evolved. A Boltzmann analysis was used to determine the excitation temperature and column density of Gd in the ablation plume, based on measured absorption from 20 Gd I spectral lines with known oscillator strengths. Oscillator strengths were then determined for additional dipole-allowed Gd I transitions identified in the absorption spectra, 19 of which were previously unreported. Oscillator strengths of all measured transitions were compared with literature values when available and show good agreement in most cases. Time-resolved measurement of atomic absorption in the cooling plasma provides access to a range of excitation temperatures and optical densities for the atoms in the ablation plume, allowing repeated measurements under different conditions, thereby improving confidence in the results. The high spectral bandwidth and resolution capabilities of DCS make it well-suited to measuring the dense optical spectrum of Gd, and the technique is applicable to other elements, especially lanthanides and actinides.

(280.4788) Optical Sensing, (280.5395) Plasma Diag↗
NASA NTRSDate not supplied

Quantifying the Effects of Departure and Flight Time Uncertainty on Urban Air Mobility Operations

Demand capacity balancing is a key mechanism for maintaining safe and efficient Urban Air Mobility (UAM) operations. However, uncertainties such as departure delays and flight time variation may reduce the effectiveness of algorithms used for balancing and detrimentally impact the safety and efficiency of UAM operations. In this paper, the effects of these uncertainties on UAM operations are quantified by modeling a distribution of departure and flight time errors. A route network in the Dallas/Fort Worth metropolitan area was used to simulate traffic demand with and without uncertainty. Simulations were conducted with three main models of uncertainty – first uncertainty in departure time delay resulting in late takeoffs, second with uncertainty in flight times in addition to departure delays, and finally, uncertainty in departure times that cause either late or early takeoffs. Each of these simulations were performed using varied standard deviations to fully understand the effects of uncertainties. Results from these simulations were compared to a baseline simulation using the same parameters, but without any uncertainty. The results suggest that both safety and efficiency are significantly impacted by uncertainty even with relatively low uncertainty introduced. These results work towards quantifying the effects of uncertainty in flight scheduling for UAM. They will also aid in the further development of the demand capacity balancing algorithms for UAM operations and associated air traffic management.

Urban Air Mobility↗
NASA NTRSDate not supplied

Quantifying Effects of Departure and Flight Time Uncertainty on Urban Air Mobility Operations

Demand capacity balancing is a key mechanism for maintaining safe and efficient Urban Air Mobility (UAM) operations. However, uncertainties such as departure delays and flight time variation may reduce the effectiveness of algorithms used for balancing and detrimentally impact the safety and efficiency of UAM operations. In this paper, the effects of these uncertainties on UAM operations are quantified by modeling a distribution of departure and flight time errors. A route network in the Dallas/Fort Worth metropolitan area was used to simulate traffic demand with and without uncertainty. Simulations were conducted with three main models of uncertainty – first uncertainty in departure time delay resulting in late takeoffs, second with uncertainty in flight times in addition to departure delays, and finally, uncertainty in departure times that cause either late or early takeoffs. Each of these simulations were performed using varied standard deviations to fully understand the effects of uncertainties. Results from these simulations were compared to a baseline simulation using the same parameters, but without any uncertainty. The results suggest that both safety and efficiency are significantly impacted by uncertainty even with relatively low uncertainty introduced. These results work towards quantifying the effects of uncertainty in flight scheduling for UAM. They will also aid in the further development of the demand capacity balancing algorithms for UAM operations and associated air traffic management.

Urban Air Mobility↗
DOE OSTI2022

Multi-species temperature and number density analysis of a laser-produced plasma using dual-comb spectroscopy

Dual-comb spectroscopy (DCS) represents a novel method of using absorption spectroscopy as a diagnostic tool for multispecies analysis of excitation temperatures and column densities in laser-produced plasmas (LPPs). DCS was performed on a LPP generated by ablating a multielement alloy containing Nd, Gd, and Fe. Transitions from all three elements were observed in absorption spectra measured from 530.08 to 535.19 nm at seven time-delays from 31 to 250 μs after ablation. The spectra were fit using a nonlinear regression algorithm to determine peak areas, and excitation temperatures and column densities were determined for the three atomic species separately using Boltzmann plots. The measured excitation temperatures of Nd I and Gd I showed good agreement at all time-delays, whereas the Fe I temperature was found to be higher, and the ratios between the column densities varied with delay. The observations are understood via effects of LPP spatial averaging, elemental fractionation, and molecular formation and are compared and contextualized with previous work studying LPPs using other spectroscopic techniques. A brief discussion of the precision and accuracy of the determined excitation temperatures and column densities is also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1982

Comparison of analytical predictions of longitudinal short period pilot-induced oscillations with results from a simulation study of the space shuttle orbiter

An analytical analysis of conditions producing pilot induced oscillations (PIO's) was made for the space shuttle orbiter in a landing approach configuration for the task of milling the elevation angle of the line of sight to a target vehicle. The analysis yielded a value of PIO frequency and a value for the amount of total system time delay (pilot + control system) that can be tolerated before instability results. Calculations were performed showing the effect of varying the range to the target and of varying the handling qualities of the orbiter vehicle. Analytical predictions were compared with simulation results obtained using a visual motion simulator.

Riley, D. R.↗
NASA NTRS1987

Rapid variability of the R Coronae Australis reflection nebula NGC 6729

Measurable changes in the surface brightness of the reflection nebula associated with R CrA occur over intervals as short as 24 hours. These and other more extreme variations are demonstrated with CCD images obtained over a 23-day period March 10 to April 2, 1984. During this time span R CrA brightened by 1.3 mag. The alterations in the appearance of the nebula NGC 6729 are apparently caused by the shadowing effects of clouds which are very close to the star, probably well within 1 Au. The spectrum of R CrA may itself vary slightly from night to night, and these changes are echoed by the surrounding nebula with an observable time delay. A photograph showing the complicated filamentary structure in NGC 6729 is reproduced and the relation between the reflection nebula and its illuminating star is discussed.

Graham, J. A.↗
NASA NTRS1994

Advanced Teleoperator Control System

Proposed teleoperator control system incorporates several advanced features to improve coordination between remote robotic manipulator (slave arm) and human operator at control manipulator (master arm). Provides superior performance in terms of error profiles and task-completion time in presence of human control errors varying over wide range and maintains stability under large signal-propagation delays. System highly robust in presence of nonlinearities and incorrect human commands in both position and rate modes of control.

Lee, Sukhan↗
NASA NTRS1994

Steps toward determination of the size and structure of the broad-line region in active galactic nuclei. 8: An intensive HST, IUE, and ground-based study of NGC 5548

We present the data and initial results from a combined HST/IUE/ground-based spectroscopic monitoring campaign on the Seyfert 1 galaxy NGC 5548 that was undertaken in order to address questions that require both higher temporal resolution and higher signal-to-noise ratios than were obtained in our previous multiwavelength monitoring of this galaxy in 1988-89. IUE spectra were obtained once every two days for a period of 74 days beginning on 14 March 1993. During the last 39 days of this campaign, spectroscopic observations were also made with the HST Faint Object Spectrograph (FOS) on a daily basis. Ground-based observations, consisting of 165 optical spectra and 77 photometric observations (both CCD imaging and aperture photometry), are reported for the period 1992 October to 1993 September, although much of the data are concentrated around the time of the satellite-based program. These data constitute a fifth year of intensive optical monitoring of this galaxy. In this contribution, we describe the acquisition and reduction of all of the satellite and ground-based data obtained in this program. We describe in detail various photometric problems with the FOS and explain how we identified and corrected for various anomalies. During the HST portion of the monitoring campaign, the 1350 A continuum flux is found to have varied by nearly a factor of two. In other wavebands, the continuum shows nearly identical behavior, except that the amplitude of variability is larger at shorter wavelengths, and the continuum light curves appear to show more short time-scale variability at shorter wavelengths. The broad emission lines also vary in flux, with amplitudes that are slightly smaller than the UV continuum variations and with a small time delay relative to the UV continuum. On the basis of simple time-series analysis of the UV and optical continuum and emission line light curves, we find (1) that the ultraviolet and optical continuum variations are virtually simultaneous, with any lag between the 1350 A continuum and the 5100 A continuum amounting to less than about one day; (2) that the variations in the highest ionization lines observed, He II lambda 1640 and N V lambda 1240, lag behind the continuum variations by somewhat less than 2 days, and (3) that the velocity field of the C IV-emitting region is not dominated by radial motion. The results on the C IV velocity field are preliminary and quite uncertain, but there are some weak indications that the emission-line (wings absolute value of Delta upsilon is greater than or equal to 3000 km/s) respond to continuum variations slightly more rapidly than does the core. The optical observations show that the variations in the broad H beta line flux follow the continuum variations with a time lag of around two weeks, about twice the lag for Ly alpha and C IV, as in our previous monitoring campaign on this same galaxy. However, the lags measured for Ly alpha, C IV, and H Beta are each slightly smaller than previously determined. We confirm two trends reported earlier, namely (1) that the UV/optical continuum becomes 'harder' as it gets brighter, and (2) that the highest ionization emission lines have the shortest lags, thus indicating radial ionization stratificatin of a broad-line region that spans over an order of magnitude range in radius.

Korista, K.↗
NASA NTRS2010

Some Issues Related to Integrating Active Flow Control With Flight Control

Time varying control of CL is necessary for integrating AFC and Flight Control (Biasing allows for +/- changes in lift) Time delays associated with actuation are long (APPROX.5.8 c/U) and must be included in controllers. Convolution of input signal with single pulse kernel gives reasonable prediction of lift response.

Williams, David↗
DOE OSTI2020

Deep Reinforcement Learning-Based Edge Caching in Wireless Networks

With the purpose to offload data traffic in wireless networks, content caching techniques have recently been studied intensively. Using these techniques and caching a portion of the popular files at the local content servers, the users can be served with less delay. Most of the content replacement policies are based on the content popularity, that depends on the users' preferences. In practice, such information varies over time. Therefore, an approach to determine the file popularity patterns must be incorporated into caching policies. In this context, we study content caching at the wireless network edge using a deep reinforcement learning framework with Wolpertinger architecture. In particular, we propose deep actor-critic reinforcement learning based policies for both centralized and decentralized content caching. For centralized edge caching, we aim at maximizing the cache hit rate. In decentralized edge caching, we consider both the cache hit rate and transmission delay as performance metrics. These proposed frameworks are assumed to neither have any prior information on the file popularities nor know the potential variations in such information. Via simulation results, the superiority of the proposed frameworks is verified by comparing them with other policies, including least frequently used (LFU), least recently used (LRU), and first-in-first-out (FIFO) policies.

42 ENGINEERING↗
DOE OSTI2023

Characterization of a Low-Temperature Plasma (LTP) Ambient Ionization Source Using Temporally Resolved Monochromatic Imaging Spectrometry

The low-temperature plasma (LTP) probe is a common plasma-based source used for ambient desorption–ionization mass spectrometry (MS). While the LTP probe has been characterized in detail with MS, relatively few studies have used optical spectroscopy. In this paper, two-dimensional (2D) imaging at selected wavelengths is used to visualize important species in the LTP plasma jet. First, 2D steady-state images of the LTP plume for N 2 + (391.2 nm), He I (706.5 nm), and N 2 (337.1 nm) emissions were recorded under selected plasma conditions. Second, time-resolved 2D emission maps of radiative species in the LTP plasma jet were recorded through the use of a 200 ns detection gate and varying gate delays with respect to the LTP trigger pulse. Emission from He I, N 2 + , and N 2 in the plasma jet region was found to show a transient behavior (often referred to as plasma bullets) lasting only a few microseconds. The N 2 + and He I maps were highly correlated in spatial and temporal structure. Further, emission from N 2 showed two maxima in time, one before and one after the maximum emission for N 2 + and He I, due to an initial electronic excitation wave and ion–electron recombination, respectively. Third, the interaction of the LTP probe with a sample substrate and an electrically grounded metallic needle was studied. Emission from a fluorophore on the sample substrate showed an initial photon-induced excitation from plasma-generated photons followed by electronic excitation by other plasma species. The presence of a grounded needle near the plasma jet significantly extended the plasma jet lifetime and also generated a long-lived corona discharge on the needle. The effect of LTP operating parameters on emission spectra was correlated with mass-spectral results including reagent-ion signals. Lastly, five movies provide a side-by-side comparison of the temporal behavior of emitting species and insights into the interactions of the emission clouds with a sample surface as well as an external needle. Temporally and spatially resolved imaging provided insights into important processes in the LTP plasma jet, which will help improve analyte ion sampling in LTP–MS.

Chan, George C. -Y.↗