Search NASA⌕ Search

SEARCH · Search NASA

Results for “TN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The Impact of Sorbent Amendments for Mercury Remediation on the Viability of Soil Microorganisms

Mercury (Hg) remediation across contaminated environments in the United States is an ongoing project. As part of the Hg cleanup strategy at East Fork Poplar Creek (EFPC), located in Oak Ridge, TN, the deployment of sorbents is considered. However, the impact of sorbents on soil microorganisms is poorly understood. In this study, we investigated the effect of sorbents on soil microorganism viability and biofilm formation to assess soil health during sorbent application for Hg remediation. We specifically investigated the effect of two engineered sorbents, Organoclay PM-199 and Organoclay MRM (which are manufactured from clay minerals formulated for various remediation applications), on two gram-negative organisms ( Serratia marcescens and Burkholderia thailandensis ) isolated from the Hg-contaminated EFPC bank soil. Pure cultures of S. marcescens or B. thailandensis were amended with 5% (w/v) and 25% (w/v) PM-199 and MRM, respectively, for 9 days. The samples were harvested, and bacterial cell viability was determined using a BacLight staining kit. Results showed that the growth of sorbent-amended S. marcescens was inhibited in contrast to that of unamended control. Furthermore, biochemical assays were used to analyze bacterial biofilm formation and integral biofilm components. Our results suggest that biofilm formation by sorbent-amended S. marcescens was negatively affected. In contrast, B. thailandensis amended with low concentrations of MRM showed enhanced growth and notable differences in biofilm morphology. These results suggest that the use of organoclay PM-199 and MRM at higher concentrations in field studies may hinder the growth of specific soil microorganisms.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Variation in Biomass Yield and Cell Wall Composition in Switchgrass Natural Variants Under Two Nitrogen Regimes

Switchgrass (Panicum virgatum) is a promising lignocellulosic biofuel crop for which biomass and processing quality are important. Inherent plant variability across genotypes and environments challenges uniformity and product quality. In this study, the impact of nitrogen (N) application on switchgrass yield and quality was examined under field conditions using a highly diverse switchgrass panel over a 4-year period at Knoxville, TN. Overall, biomass production was correlated between low (0 kg of added N/ha) and moderate (135 kg of added N/ha) nitrogen treatments, suggesting that the N impact is largely uniform across the genotypes. Nonetheless, high biomass genotypes were identified with high nitrogen-use efficiency ; biomass was congruent or even higher (up to 9-fold) in the low N treatment. Genotypes were also identified with up to 94% nitrogen-remobilization efficiency. Furthermore, nitrogen application appeared to impact lignin content in whole tillers but was neutral to lignin monomer syringyl-to-guaiacyl (S/G) ratio. The same panel grown under natural conditions in Watkinsville, GA, produced significantly more biomass than the Tennessee panel in the first 3 years, but biomass was similar across both sites and treatments in year 4. Top performing genotypes overlapped between sites by 20-37%. There were low correlations in lignin content in whole tillers across the two field sites, but moderate correlations were observed for S/G ratios. The high yielding genotypes from the low N plot identified in this study can be used in breeding programs and management strategies in switchgrass to evade adverse environmental and economic effects.

09 BIOMASS FUELS↗
DOE OSTI2020

An agent-based approach to study the diffusion rate and the effect of policies on joint placement of photovoltaic panels and green roof under climate change uncertainty

As two of the highest trending green technologies, photovoltaic panels and green roofs are proven to be effective practices for energy generation and energy saving. The achievable impact from the widespread installation of such technologies is, however, not clearly established. This is mainly because the degree of this impact highly depends on the inherently uncertain environmental and climate factors, as well as the unknown adoption rates of these technologies, which in turn depend on different characteristics of decision makers and interactions among them. To that end, this study aims to investigate the diffusion rate of these green technologies under uncertainties caused by climate change, characteristics of adopters, and their interactions. An integrated framework is developed to capture the interplay between financial and attitudinal aspects, as well as the uncertainties due to both the stochastic nature of system parameters and the interactions among agents involving human beings. Specifically, this framework consists of a integer programming model to optimize the green roof and/or photovoltaic panel installation settings for a given building under climate change uncertainty, and an agent-based model to factor in the role of human behavior and interactions. A case study for the city of Knoxville, TN, is presented to evaluate the effects of different policies on the diffusion rate of the green technologies of interest. The results show that the affordability of green technologies and public awareness are the key drivers of the adoption of these technologies, which highlight the important role of the decision makers in impacting the diffusion rate.

14 SOLAR ENERGY↗
DOE OSTI2024

A Vehicle-to-Grid planning framework incorporating electric vehicle user equilibrium and distribution network flexibility enhancement

The rapid surge in electric vehicle (EV) adoption, coupled with advancements in charging technologies, emphasizes the critical necessity for expanding EV recharging infrastructure. Simultaneously, the Distribution Network (DN) encounters escalating challenges in meeting charging demand during peak traffic periods. Consequently, there is a mounting demand for the deployment of innovative Vehicle-to-Grid (V2G) technologies to augment the DN’s flexibility in power dispatch and alleviate travel costs for EV users. Hence, this paper proposes an EV-user-equilibrium-(UE)-constrained V2G planning framework that enhances flexibility in the DN. The framework aims to ascertain the optimal placement and capacity of EV charging stations (EVCSs) and V2G charging piles within the Transportation Network (TN). It takes into account the equilibrium condition stemming from competitive EV charging and routing behaviors alongside the optimal expansion of DN energy resources to accommodate the electricity supplied by the V2G piles. This study commences by analyzing EV drivers’ travel decisions, considering the influence of charging and V2G pile locations and sizes. Subsequently, we tackle the Traffic Assignment Problem with User Equilibrium (TAP-UE) model to characterize the steady-state traffic flow distribution of EVs. Following this, we formulate the optimization model for the Coordinated Power and Transportation Network (CPTN), which encompasses the optimal expansion of DN facilities and traffic flow regulation under UE conditions. To mitigate the computational complexity associated with the V2G planning model, we introduce a series of linearization methods to obtain a manageable Mixed-Integer Linear Programming (MILP) solution. Finally, to validate the efficacy of our proposed planning framework, we apply it to two test systems, including a real-world case study. Through these case studies, we explore the necessity and potential benefits of V2G technologies.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

UrbanPop: A spatial microsimulation framework for exploring demographic influences on human dynamics

Ensuring the social equity of planning measures in social systems requires an understanding of human dynamics, particularly how individual relationships, activities, and interactions intersect with individual needs. Spatial microsimulation models (SMSMs) support planning for human security goals by representing human dynamics through realistic, georeferenced synthetic populations, that a) provide a complete representation of social systems while b) also protecting individual privacy. In this paper, we present UrbanPop, an open and reproducible SMSM framework for analysis of human dynamics with high spatial, temporal, and demographic resolution. UrbanPop creates synthetic populations of demographically detailed worker and student agents, positioning them first at probable nighttime locations (home), then moving them to probable daytime locations (work/school). Summary aggregations of these populations match the granular detail available at the census block group level in the American Community Survey Summary File (SF), providing realistic approximations of the actual population. UrbanPop users can select particular demographic traits important in their application, resulting in a highly tailored agent population. We first lay out UrbanPop's baseline methodology, including population synthesis, activity modeling, and diagnostics, then demonstrate these capabilities by developing case studies of shifting population distributions and high-risk populations in Knox County, TN during the global COVID-19 pandemic.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Using taxa-based approaches to delineate stream macroinvertebrate assemblage responses to stressor gradients in modified alluvial agroecosystems

Alluvial plain landscapes are some of the most agriculturally productive lands in the world but often have modified stream ecosystems due to cultivation history. This context requires consideration when establishing water quality management goals. We analyzed state water quality databases to demonstrate that Mississippi Alluvial Plain (MAP) ecoregion streams have elevated specific conductivity (SC) and nutrients and lower macroinvertebrate local and regional taxa pools compared to streams in other ecoregions, potentially reducing the efficacy of traditional biomonitoring approaches within the region. To overcome these challenges, we used threshold indicator taxa analysis (TITAN) to compare macroinvertebrate assemblage responses to water quality gradients among ecoregions in Mississippi. We identified individual taxa and assemblage-level responses to increasing water quality degradation in MAP streams. Observed responses occurred at higher concentrations for SC, total organic carbon (TOC) and total phosphorus (TP), but not total nitrogen (TN) relative to other ecoregions. These responses appeared to be driven by a large proportion of indicator taxa considered tolerant or unresponsive in other ecoregions, responding negatively to increasing water quality stressors in MAP streams. Our observed assemblage-level stressor responses to WQ gradients in MAP streams demonstrate shifting tolerance in highly altered ecosystems may require adjustments to recovery expectations but also provide useful measures for monitoring improvements in regional water quality. For example, our observed macroinvertebrate assemblage response to increasing TP identified a management goal similar to guidance based on distributional analysis of water quality data within the MAP ecoregion (0.11 vs 0.128 mg L –1 ) and thus provide some biological basis for previously identified nutrient goals for the region. Our approach can guide and monitor success of nutrient reduction efforts in MAP watersheds and other alluvial plain agroecosystems where reference conditions do not exist, and local and regional taxa pools are less diverse and may not support full recovery of ecological assemblages. While our results are promising, they should also be compared with more sensitive and less habitat-limited biological assemblages (e.g., algae or bacteria) to better understand complex ecological responses to best management practices designed to increase sustainability of high production agricultural regions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Mixed nitrate and metal contamination influences operational speciation of toxic and essential elements

Environmental contamination constrains microbial communities impacting diversity and total metabolic activity. The former S-3 Ponds contamination site at Oak Ridge Reservation (ORR), TN, has elevated concentrations of nitric acid and multiple metals from decades of processing nuclear material. To determine the nature of the metal contamination in the sediment, a three-step sequential chemical extraction (BCR) was performed on sediment segments from a core located upgradient (EB271, non-contaminated) and one downgradient (EB106, contaminated) of the S-3 Ponds. The resulting exchangeable, reducing, and oxidizing fractions were analyzed for 18 different elements. Comparison of the two cores revealed changes in operational speciation for several elements caused by the contamination. Those present from the S-3 Ponds, including Al, U, Co, Cu, Ni, and Cd, were not only elevated in concentration in the EB106 core but were also operationally more available with increased mobility in the acidic environment. Other elements, including Mg, Ca, P, V, As, and Mo, were less operationally available in EB106 having decreased concentrations in the exchangeable fraction. Here, the bioavailability of essential macro nutrients Mg, Ca, and P from the two types of sediment was determined using three metal-tolerant bacteria previously isolated from ORR. Mg and Ca were available from both sediments for all three strains; however, P was not bioavailable from either sediment for any strain. The decreased operational speciation of P in contaminated ORR sediment may increase the dependence of the microbial community on other pools of P or select for microorganisms with increased P scavenging capabilities. Hence, the microbial community at the former S-3 Ponds contamination site may be constrained not only by increased toxic metal concentrations but also by the availability of essential elements, including P.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Spatiotemporal features of traffic help reduce automatic accident detection time

Quick and reliable automatic detection of traffic accidents is of paramount importance to save human lives in transportation systems. However, automatically detecting when accidents occur has proven challenging, and minimizing the time to detect accidents (TTDA) by using traditional features in machine learning (ML) classifiers has plateaued. We hypothesize that accidents affect traffic farther from the accident location than previously reported. Therefore, leveraging traffic signatures from neighboring sensors that are adjacent to accidents should help improve their detection. We confirm this hypothesis by using verified ground-truth accident data, traffic data from radar detection system sensors, and light and weather conditions and show that we can minimize the TTDA while maximizing classification performance by considering spatiotemporal features of traffic. Specifically, we compare the performance of different ML classifiers (i.e, logistic regression, random forest, and XGBoost) when controlling for different numbers of neighboring sensors and TTDA horizons. We use data from interstates 75 and 24 in the metropolitan area that surrounds Chattanooga, TN. Our results show that the XGBoost classifier produces the best results by detecting accidents as quickly as 1.0 min after their occurrence with an area under the receiver operating characteristic curve of up to 83% and an average precision of up to 49%. We describe limitations, open challenges, and how the proposed framework can be used for quicker operational accident detection.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Repeated freeze-thaw cycles increase extractable, but not total, carbon and nitrogen in a Maine coniferous soil

Northeastern North America has been experiencing warmer winters with reduced snow accumulation, with more frequent winter freeze-thaw cycles. We conducted a laboratory experiment to investigate how increased frequency of freeze-thaw cycles (FTC) would alter soil C and N availability. Organic (O) and mineral (B) horizon soils were collected from a coniferous forest in Maine, processed to exclude roots, and then frozen in the laboratory (-10 °C) with one (FTC-1), two (FTC-2), or six (FTC-6) thaw periods. Soils were analyzed for extractable inorganic ammonium (NH4-N), water extractable organic carbon (WEOC), carbon dioxide flux (respiration), and total C and N. Extractable NH4-N increased following FTC, for both horizons. WEOC in O horizons had a lower SUVA254, indicating a stronger microbial influence (i.e., microbial cell lysis) in these soils after FTC. Respiration in O horizon soils decreased post-incubation and did not differ between FTC and Control soils. In the B horizon, however, FTC soils showed greater respiration than Control soils, suggesting that the newly available nutrients may have stimulated microbial activity. In contrast to these results, total C and N remained unaltered by FTC, presumably because the FTC disturbances represented mostly a translocation of C and N from one pool into another, and losses due to respiration were too small to significantly influence the large TC and TN pools. The effect of FTC on NH4-N did not change with FTC frequency, suggesting that a single FTC is sufficient to alter both C and N availability and quality, and that additional FTC may not have a significant further effect. This study provides fresh insights on how organic and mineral soils might respond to increased freeze-thaw frequency in winter.

Patel, Kaizad F.↗
DOE OSTI2022

Medium-scale to large-scale implementation of cyber-physical human experiments in live traffic

Autonomous Vehicles (AVs) such as cars and trucks are being developed and tested as Cyber-Physical Human systems while the technology improves. Before these systems can achieve full autonomy, some serve as tools in the form of adaptive cruise control. The CIRCLES Consortium investigates the potential for AVs to increase fuel efficiency of highway traffic by smoothing “stop-and-go” traffic waves that result from normal human driving behavior in congestion. We have performed an experiment to evaluate the real world effects of implementing this strategy. A medium-scale experiment was performed on I-24 near Nashville, TN in August 2021. This was a precursor to a larger experiment that will take place November 2022. We examine how the human part of the experiment will change as we scale up from an 11 vehicle test (four AVs) to 100 AVs. There are many solutions to problems of the medium-scale experiment that would be inconvenient, complicate the experience, or not be practicable. The medium-scale experiment involved 11 cars of which four had a custom control algorithm installed to be engaged by the driver. The large-scale experiment will have 100 cars, all with custom control algorithm installed to act on traffic when the controller is engaged. We examine key choices made for the medium experiment, and how some will be different for the large experiment. Our experience performing the medium-scale experiment has made it clear that repeating our methods from this smaller one are inefficient or impossible if used for the large-scale experiment and will be improved.

McQuade, Sean T.↗
DOE OSTI2021

Prediction of PbLi fluid flow and temperature field in a thermal convection loop for qualification of fusion materials

Two modeling tools, a thermohydraulics code and a computational model in COMSOL Multiphysics, have been developed, tested and then applied to the analysis of fluid flow and heat transfer in a thermal convection loop (TCL). Such a device has recently been used to experimentally evaluate corrosion compatibility of APMT (Fe–21Cr–5Al–3Mo) steel with high-temperature molten eutectic lead-lithium (PbLi) alloy at Oak Ridge National Lab, TN, USA. Here, the 1-D thermohydraulics code allows for rapid calculations of the loop parameters as a function of the applied heat flux. The supplemental COMSOL finite-element computations provide detailed 3-D velocity and temperature field data but are much more time consuming. Both modelling tools demonstrate an excellent agreement in the computed circulation velocity as well as maximum and minimum temperatures. The performed TCL analysis focuses on flow development in the “hot” and “cold” legs, formation of Dean vortices in corner regions, blocking effect of the immersed samples, and radiative and convective cooling effects under the experiment-relevant conditions for Prandtl number Pr = 0.015, Grashof numbers Gr ~10 7 , and Reynolds numbers Re ~10 4 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Unraveling the nature of Fe-doping mediated inter- and intra-chain interactions in Ca 3 Co 2 O 6

The structural and magnetic properties of quasi-one-dimensional (1D) spin-chain compounds Ca 3 Co 2-x Fe x O 6 (x = 0, 0.1, 0.2 and 0.3) synthesized by a sol-gel method have been systematically studied by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), neutron powder diffraction (NPD), dc and ac magnetization measurements. The samples adopt a rhombohedral crystal structure with the space group R-3c in a temperature range of 5–100 K. Fe ions are found to locate at the trigonal prism Co2 crystallographic sites. Fe doping converts some of low-spin Co 3+ ions at Co1 octahedral sites into Co 2+ ions. For the high-temperature paramagnetic phase, the Curie paramagnetic temperature θp changes its sign from positive to negative at x = 0.2, implying that the dominant magnetic interaction is driven from ferromagnetic (FM) to antiferromagnetic (AFM) upon Fe substitution. A partial low-spin to high-spin state crossover of the Co1 ions is observed at high Fe-doping level x = 0.3. All the samples exhibit a long-range spin-density wave (SDW) AFM ordering below TN, followed by a spin-glass-like transition at Tf. These low-temperature magnetic phases were significantly suppressed upon Fe doping. The Fe substitution in Ca 3 Co 2-x Fe x O 6 weakened both intrachain and interchain magnetic interactions, caused by enhanced magnetic disorder due to the different magnetic characters of Ising Co and Heisenberg Fe spins.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coexistence of positive and negative exchange bias effect in Pr-doped NdCrO 3 samples

Positive and negative exchange bias effects are observed in Nd 1-x Pr x CrO 3 (0.00 ≤ x ≤ 1.00) polycrystalline samples. The shift of hysteresis loops, either opposing or following the direction of the field cooling, depends on the concentration of praseodymium. The temperature dependence of magnetization reveals a magnetic transition at T ≈ 220 K likely ascribed to the N é el temperature of Cr 3+ magnetic moments. The non-Kramer Pr 3+ ion seems to play an important role in the magnetic properties of this compound. In the range 0.00 ≤ x ≤ 0.60, all samples presented a decrease in the magnetization below TN and a clear compensation point. Pr-rich samples (x ≥ 0.70) show a paramagnetic-like behavior down to low temperatures. We report the most impressive result is the relation between reversal magnetization and the signal of exchange bias effect which seems be tuned by the Pr-doping.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular-field-theory fits to magnetic susceptibilities of antiferromagnetic GdCu 2 Si 2 , CuO, LiCrO 2 , and α-CaCr 2 O 4 single crystals below their Néel temperatures

A recently-developed molecular field theory (MFT) has been used to fit single-crystal magnetic susceptibility χ versus temperature T data below the respective antiferromagnetic ordering temperature T N for a variety of collinear and coplanar noncollinear Heisenberg antiferromagnets. The spins in the system are assumed to interact by Heisenberg exchange and to be identical and crystallographically equivalent. The fitting parameters for χ(T ) of collinear antiferromagnets are measurable quantities: the Weiss temperature θ p in the Curie-Weiss law, TN, χ(T N ), and the spin S. For coplanar noncollinear helix and cycloid structures, an additional fitting parameter is the turn angle between layers of ferromagnetically-aligned spins. Here MFT fits to anisotropic χ(T) data from the literature for single crystals of the collinear antiferromagnets GdCu 2 Si 2 and CuO and the noncollinear antiferromagnets LiCrO 2 with a 120° cycloidal structure and α-CaCr 2 O 4 with a 120° helical structure below their respective N´eel temperatures are presented. The MFT fit to the anisotropic χ(T ≤ T N ) data for CuO is poor, whereas the fits to the data for GdCu 2 Si 2 , LiCrO 2 , and α-CaCr 2 O 4 are quite good. The poor fit for CuO is attributed to the influence of strong quantum fluctuations associated with the small Cu spin and the quasi-one-dimensional magnetism that are not taken into account by the MFT. The magnetic contribution to the zero-field heat capacity of the collinear antiferromagnet GdNiGe 3 at T ≤ T N is also fitted by the MFT.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Empirical validation of building energy simulation model input parameter for multizone commercial building during the cooling season

This paper presents a critical advancement in Building Energy Modeling (BEM) through an empirical validation approach using a high-quality dataset from a multizone commercial office building in Oak Ridge, TN, USA. BEM is widely utilized in diverse construction applications, but its effectiveness relies on the accuracy of its predictions. The study focuses on empirical validation of input parameters in BEM, including building envelope data, infiltration modeling, and rooftop unit system performance curves. The validation of simulation input parameters leads to substantial improvements in the accuracy of simulation results. Notable both NMBE and cv (RMSE) values are reduced by 0.5 % for indoor air temperature and 17 % for indoor air relative humidity compared to the previous model. At the system level, both NMBE and cv (RMSE) values are reduced by 2 % for fan energy consumption and 4 % for cooling energy consumption, compared to the previous model. A literature review highlights a significant gap in empirical validation studies, which predominantly concentrate on either component-level or whole building validation. Furthermore, many studies employ simplified setups that may not faithfully represent the complexities of multizone commercial buildings. This paper distinguishes itself by emphasizing the critical importance of component-level input parameter validation. It underlines the need to validate data related to building envelope components and HVAC system performance curves, resulting in more accurate simulation outcomes. In conclusion, the utilization of actual multizone commercial building data enhances the study's practical relevance. In summary, this research underscores the pivotal role of input parameter validation in enhancing the accuracy and reliability of BEM.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2019

Probing Electrochemical Mg-Ion Activity in MgCr 2– x V x O 4 Spinel Oxides

Mg migration in oxide spinels is impeded by strong affinity between divalent Mg and oxygen, suggesting a necessity of exploring new chemistry of solid lattices for functional Mg-ion electrode materials. Cationic mobility with a suitable activation energy in Cr spinels is Tn. evidenced by theoretical and experimental results, while redox potentials of V are appropriate to operate with currently limited candidates of '''c" nonaqueous electrolytes. By controlling the structure, composition, and complexity, a largely solid-solution MgCrVO 4 spinel was synthesized, which, unlike nanocornposites, can bring together the advantages of each transition metal in the lattice. The spinel was successfully synthesized by a simple solid-state reaction with minor inactive Cr- or V-rich components, which was confirmed via 25 Mg MAS NMR and high-resolution X-ray diffraction analyses. A thermally and anodically stable Mg(TPFA) 2 /triglyme electrolyte was utilized for high-temperature electrochemistry and lowering kinetic barriers at and across interfaces so as to observe intercalation behavior of Mg in the designed lattice. Multimodal characterization confirmed an apparent bulk demagnesiation from MgCrVO 4 with partial reversibility by probing evolution of the local and long-range structure as well as vanadium and chromium electronic states within the lattice. Furthermore, characterization experiments also provided a direct evidence for (de)intercalation reactions that occurred without any major competitive conversion reactions or insertion of protons into the lattice, except for the formation of a surface rock salt phase upon charge. These findings in Mg-ion activity expand opportunities to design Mg spinel oxide materials while highlighting the need to identify the origins of reversibility challenges due to, but not limited to, phase stability, particularly for the charged states, barriers at the interface, electrolyte stabilities, and desolvation phenomena, collectively hindering practical use as cathode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Iridate Li8IrO 6 : An Antiferromagnetic Insulator

In this work, a polycrystalline iridate Li 8 IrO 6 material was prepared via heating Li 2 O and IrO 2 starting materials in a sealed quartz tube at 650 °C for 48 h. The structure was determined from Rietveld refinement of room-temperature powder neutron diffraction data. Li 8 IrO 6 adopts the nonpolar space group $R\bar{3}$ with Li atoms occupying the tetrahedral and octahedral sites, which is supported by the electron diffraction and solid-state 7Li NMR. This results in a crystal structure consisting of LiO 4 tetrahedral layers alternating with mixed IrO 6 and LiO 6 octahedral layers along the crystallographic c -axis. The +4 oxidation state of Ir 4+ was confirmed by near-edge X-ray absorption spectroscopy. An in situ synchrotron X-ray diffraction study of Li 8 IrO 6 indicates that the sample is stable up to 1000 °C and exhibits no structural transitions. Magnetic measurements suggest long-range antiferromagnetic ordering with a Néel temperature (TN) of 4 K, which is corroborated by heat capacity measurements. The localized effective moment $μ_{\text{eff}}$ (Ir) = 1.73 $μ_{\text{B}}$ and insulating character indicate that Li 8 IrO 6 is a correlated insulator. First-principles calculations support the nonpolar crystal structure and reveal the insulating behavior both in paramagnetic and antiferromagnetic states.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evolution of Bonding and Magnetism via Changes in Valence Electron Count in CuFe 2– x Co x Ge 2

A series of solid solutions, CuFe 2–x Co x Ge 2 (x = 0, 0.2, 0.4, 0.8, and 1.0), have been synthesized by arc-melting and characterized by powder X-ray and neutron diffraction, magnetic measurements, Mössbauer spectroscopy, and electronic band structure calculations. All compounds crystallize in the CuFe 2 Ge 2 structure type, which can be considered as a three-dimensional framework built of fused MGe6 octahedra and MGe 5 trigonal bipyramids (M = Fe and Co), with channels filled by rows of Cu atoms. As the Co content (x) increases, the unit cell volume decreases in an anisotropic fashion: the b and c lattice parameters decrease while the a parameter increases. The changes in all the parameters are nearly linear, thus following Vegard’s law. CuFe 2 Ge 2 exhibits two successive antiferromagnetic (AFM) orderings, corresponding to the formation of a commensurate AFM structure, followed by an incommensurate AFM structure observed at lower temperatures. Additionally, as the Co content increases, the AFM ordering temperature (TN) gradually decreases, and only one AFM transition is observed for x ≥ 0.2. The magnetic behavior of unsubstituted CuFe 2 Ge 2 was found to be sensitive to the preparation method. The temperature-dependent zero-field 57 Fe Mössbauer spectra reveal two hyperfine split components that evolve in agreement with the two consecutive AFM orderings observed in magnetic measurements. In contrast, the field-dependent spectra obtained for fields ≥ 2 T reveal a parallel arrangement of the moments associated with the two crystallographically unique metal sites. Electronic band structure calculations and chemical bonding analysis reveal a mix of strong M–M antibonding and non-bonding states at the Fermi level, in support of the overall AFM ordering observed in zero field. The substitution of Co for Fe reduces the population of the M–M antibonding states and the overall density of states at the Fermi level, thus suppressing the T N value.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗