Search NASA⌕ Search

SEARCH · Search NASA

Results for “TOKAMAK DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Flow and shear behavior in the edge and scrape-off layer of L-mode plasmas in National Spherical Torus Experiment

Fluctuations in the edge and scrape-off layer (SOL) of L-mode plasmas in the National Spherical Torus Experiment [Kaye et al., Phys. Plasmas 8, 1977 (2001)] as observed by the gas puff imaging (GPI) diagnostic are studied. Calculation of local, time resolved velocity maps using the hybrid optical flow and pattern matching velocimetry code enables analysis of turbulent flow and shear behavior. Periodic reversals in the direction of the poloidal flow near the separatrix are observed. Also, poloidal velocities and their radial shearing rate are found to be well correlated with the fraction of D{sub {alpha}} light contained in the SOL, which acts as a measure of turbulent bursts. The spectra of GPI intensity and poloidal velocity both have a strong feature near 3 kHz, which appears to correspond with turbulent bursts. This mode exhibits a poloidal structure with poloidal wavenumber of 7.7 m{sup -1} for GPI intensity and 3.4 m{sup -1} for poloidal velocity, and the poloidal velocity fluctuations near 3 kHz remain coherent over length scales in excess of the turbulent scales. Furthermore, recent SOL turbulence simulations find a parameter regime that exhibits periodic bursty transport and shares many qualitative similarities with the experimental data. Strong correlations between the shearing rate and the turbulent bursts are observed for time periods of {approx}2 ms, but the relationship is complicated by several factors. Finally, measurements of the radial profiles of the Reynolds shear stresses are reported. These radial profiles exhibit many similarities for several shots, and a region with positive radial gradient is seen to be coincident with local flow shear.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Territorial characteristics of low frequency electrostatic fluctuations in a simple magnetized torus

This paper presents an experimental investigation of turbulence in simple toroidal plasma devices without rotational transform. It is argued that Rayleigh-Taylor (flute interchange) mode may be one of the source mechanisms for the observed turbulence but is not sufficient to explain its observed global characteristics. Taking BETA device as an example, we show that pure Rayleigh-Taylor mode cannot explain (i) the observation of mode maximum at the location other than where density scale length is minimum, (ii) the comparable value of amplitude level of fluctuations in good curvature region, and (iii) the decrease in the mode amplitude with increasing magnetic field. Investigations have revealed that there exists not only poloidal plasma flow but also that it is sheared. Including this effect explains the first observation. However, modification brought about by velocity shear in the Rayleigh-Taylor mode still does not explain our second and third observations. We have taken an approach that since Rayleigh-Taylor is not excited in a good curvature region, it cannot be the source of turbulence there. Nor is it defensible to say that turbulence born in a bad curvature region is carried over through ExB rotation to the good curvature region. Consequently, we have invoked cross-field Simon-Hoh instability for this region. Experimental evidence supporting our proposal is presented. This paper concludes that toroidal devices have simultaneous existence of different self-consistent sources of turbulence in different regions of the device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Free-boundary magnetohydrodynamic equilibria with flow

The finite-element M3D code [W. Park et al., Phys. Plasmas 6, 1796 (1999)] has been modified to include a free-boundary equilibrium solver with arbitrary toroidal and poloidal flows. With this modification, the M3D code now has the capability to self-consistently model two essential ingredients necessary for equilibrium calculations in the edge region, namely, free-boundary and arbitrary flow. As a free-boundary code, M3D includes the separatrix and scrape-off layer regions in the equilibrium calculation. Poloidal flows in the subsonic, supersonic, and transonic regimes can be calculated with the new version of the M3D code. Calculation results show that the presence of equilibrium flows, in particular those next to the plasma boundary, can considerably influence the position of the X-point and magnetic separatrix shape/location and hence the position of the strike point on the divertor plates. Moreover, it is shown that poloidal flow is not a rigid-body rotation, with the fastest flows occurring on the inboard side of the plasma. A numerical confirmation of the ''de Laval nozzle'' model of Betti and Freidberg [R. Betti and J. P. Freidberg, Phys. Plasmas 7, 2439 (2000)] for free-boundary equilibrium calculations is obtained, with the formation of the predicted discontinuities between regions of subsonic and supersonic flows (with respect to the poloidal sound speed). Finally, a detailed comparison between isentropic and isothermal equilibria is presented, showing qualitative analogies and quantitative differences.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of plasma poloidal rotation on resistive wall mode instability in toroidally rotating plasmas

Stability of resistive wall mode (RWM) is investigated in a cylindrical plasma and an axisymmetric toroidal plasma by taking into account not only toroidal rotation but also poloidal rotation. Since the Doppler shifted frequency is responsible for the RWM stability, the modification of this Doppler shifted frequency by poloidal rotation affects the rotation effect on RWM. When a poloidal rotation frequency is not so large, the effect of poloidal rotation on the RWM stability can be approximately treated with the modified toroidal rotation frequency. In a toroidal plasma, this modified frequency is determined by subtracting a toroidal component of the rotation parallel to the magnetic field from the toroidal rotation frequency. The poloidal rotation that counteracts the effect of the Doppler shift strongly reduces the stabilizing effect of toroidal rotation, but by changing the rotational direction, the poloidal rotation enhances this stabilizing effect. This trend is confirmed in not only a cylindrical plasma but also a toroidal plasma. This result indicates that poloidal rotation produces the dependence of the critical toroidal rotation frequency for stabilizing RWM on the rotational direction of toroidal rotation in the same magnetic configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of scrape-off layer turbulence simulations with experiments using a synthetic gas puff imaging diagnostic

A synthetic gas puff imaging (GPI) diagnostic has been added to the scrape-off layer turbulence (SOLT) simulation code, enabling comparisons with GPI data from the National Spherical Torus Experiment (NSTX) [M. Ono et al., Nucl. Fusion 40, 557 (2000)]. The edge and scrape-off layer are modeled in the radial and poloidal (bidirectional) dimensions of the outboard midplane region of NSTX. A low-confinement mode discharge is simulated by choosing reference parameters, including radial density and temperature profiles, to be consistent with those of the shot (no. 112825). NSTX and simulation GPI data are submitted to identical analyses. It is demonstrated that the level of turbulent fluctuations in the simulation may be adjusted to give synthetic GPI radial intensity profiles similar to those of the experiment; for a ''best-case'' simulation, SOLT and NSTX probability distribution functions of blob radial locations, widths, and GPI image velocities are compared. For the simulation, synthetic GPI image velocity and fluid convection (ExB) velocity are compared and contrasted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Chemical response of lithiated graphite with deuterium irradiation

Lithium wall conditioning has been found to enhance plasma performance for graphite walled fusion devices such as TFTR, CDX-U, T-11M, TJ-II and NSTX. Among observed plasma enhancements is a reduction in edge density and reduced deuterium recycling. The mechanism by which lithiated graphite retains deuterium is largely unknown. Under controlled laboratory conditions, X-ray photoelectron spectroscopy (XPS) is used to observe the chemical changes that occur on ATJ graphite after lithium deposition. The chemical state of lithiated graphite is found to change upon deuterium irradiation indicating the formation Li-O-D, manifest at 532.9 {+-} 0.6 eV. Lithium-deuterium interactions are also manifest in the C 1s photoelectron energy range and show Li-C-D interactions at 291.2 {+-} 0.6 eV. Post-mortem NSTX tiles that have been exposed to air upon extraction are cleaned and examined, revealing the chemical archaeology that formed during NSTX operations. XPS spectra show strong correlation ({+-} 0.3 eV) in Li-O-D and Li-O peaks from post-mortem and control experiments, thus validating offline experiments. We report findings that show that deuterium is found to interact with lithium after lithium has already reacted with carbon and oxygen.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An accurate symplectic calculation of the inboard magnetic footprint from statistical topological noise and field errors in the DIII-D

Any canonical transformation of Hamiltonian equations is symplectic, and any area-preserving transformation in 2D is a symplectomorphism. Based on these, a discrete symplectic map and its continuous symplectic analog are derived for forward magnetic field line trajectories in natural canonical coordinates. The unperturbed axisymmetric Hamiltonian for magnetic field lines is constructed from the experimental data in the DIII-D [J. L. Luxon and L. E. Davis, Fusion Technol. 8, 441 (1985)]. The equilibrium Hamiltonian is a highly accurate, analytic, and realistic representation of the magnetic geometry of the DIII-D. These symplectic mathematical maps are used to calculate the magnetic footprint on the inboard collector plate in the DIII-D. Internal statistical topological noise and field errors are irreducible and ubiquitous in magnetic confinement schemes for fusion. It is important to know the stochasticity and magnetic footprint from noise and error fields. The estimates of the spectrum and mode amplitudes of the spatial topological noise and magnetic errors in the DIII-D are used as magnetic perturbation. The discrete and continuous symplectic maps are used to calculate the magnetic footprint on the inboard collector plate of the DIII-D by inverting the natural coordinates to physical coordinates. The combination of highly accurate equilibrium generating function, natural canonical coordinates, symplecticity, and small step-size together gives a very accurate calculation of magnetic footprint. Radial variation of magnetic perturbation and the response of plasma to perturbation are not included. The inboard footprint from noise and errors are dominated by m=3, n=1 mode. The footprint is in the form of a toroidally winding helical strip. The width of stochastic layer scales as (1/2) power of amplitude. The area of footprint scales as first power of amplitude. The physical parameters such as toroidal angle, length, and poloidal angle covered before striking, and the safety factor all have fractal structure. The average field diffusion near the X-point for lines that strike and that do not strike differs by about three to four orders of magnitude. The magnetic footprint gives the maximal bounds on size and heat flux density on collector plate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental investigation of the trigger problem in magnetic reconnection

Magnetic reconnection releases magnetic energy not only in steady state, but also in time-dependent and often explosive events. Here, we investigate the trigger mechanism for this explosive release by using a toroidal experiment in the strong guide-field regime. We observe spontaneous reconnection events with exponentially growing reconnection rates, and we characterize the full 3D dynamics of these events using multiple internal probes. The reconnection is asymmetric: it begins at one toroidal location and propagates around in both directions. The spontaneous onset is facilitated by an interaction between the x-line current channel and a global mode, which appears in the electrostatic potential. It is this mode which breaks axisymmetry and enables a localized decrease in x-line current. We apply a simple model - which relies on ion polarization currents for current continuity - to reproduce the exponential growth and compute the growth rate. The result agrees well with the experimental growth rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scaling of the power exhaust channel in Alcator C-Mod

Parametric dependences of the heat flux footprint on the outer divertor target plate are explored in EDA H-mode and ohmic L-mode plasmas over a wide range of parameters with attached plasma conditions. Heat flux profile shapes are found to be independent of toroidal field strength, independent of power flow along magnetic field lines and insensitive to x-point topology (single-null versus double-null). The magnitudes and widths closely follow that of the ''upstream'' pressure profile, which are correlated to plasma thermal energy content and plasma current. Heat flux decay lengths near the strike-point in H- and L-mode plasmas scale approximately with the inverse of plasma current, with a diminished dependence at high collisionality in L-mode. Consistent with previous studies, pressure gradients in the boundary scale with plasma current squared, holding the magnetohydrodynamic ballooning parameter approximately invariant at fixed collisionality--strong evidence that critical-gradient transport physics plays a key role in setting the power exhaust channel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of nonaxisymmetric magnetic perturbations on divertor heat and particle flux profiles in National Spherical Torus Experiment

Small, nonaxisymmetric magnetic perturbations generated by external coils have been found to break the axisymmetry of heat and particle flux deposition pattern in the divertor area in the National Spherical Torus Experiment (NSTX). This breaking by the applied 3-D field causes strike point splitting that is represented as local peaks and valleys in the divertor profiles. In case of n = 3 fields application, the broken toroidal symmetry of the divertor profile shows 120 deg. of spatial periodicity while data for n = 1 fields provide a fully nonaxisymmetric heat and particle deposition. Field line tracing showed good agreement with the measured heat and particle flux profiles. Higher toroidal mode number (n = 3) of the applied perturbation produced more and finer striations in the divertor profiles than in the lower mode number (n = 1) case. Following the previous result of the intrinsic strike point splitting by the n = 3 error fields [Nucl. Fusion 50, 045010 (2010); J. Nucl. Mater. (2011), doi:10.1016/j.jnucmat.2011.01.115], result of the connection length profile from field line tracing identifies intrinsic error field as a possible source of the intrinsic splitting. In determining the strike point splitting pattern, q{sub 95} is found to play an important role; higher q{sub 95} produces finer striations and induces higher fraction of heat flux to flow through the split strike point channels. Higher pedestal electron collisionality also made the striations in the D{sub {alpha}} profile more pronounced in the given range of collisionality variation. The radial location of local peaks in the profiles during the triggered edge localized modes (ELMs) by the applied n = 3 fields stays similar before and after the application. This shows that the heat flux from the triggered ELMs follows the mode number of the applied perturbation. The external magnetic perturbation can reattach detached divertor plasma, but this can be overcome by detaching the plasma with additional divertor gas puffing.

36 MATERIALS SCIENCE↗

Electron heat transport from stochastic fields in gyrokinetic simulations

GYRO is used to examine the perturbed magnetic field structure generated by electromagnetic gyrokinetic simulations of the CYCLONE base case as {beta}{sub e} is varied from 0.1% to 0.7%, as investigated by J. Candy [Phys. Plasmas 12, 072307 (2005)]. Poincare surface of section plots obtained from integrating the self-consistent magnetic field demonstrates widespread stochasticity for all nonzero values of {beta}{sub e}. Despite widespread stochasticity of the perturbed magnetic fields, no significant increase in electron transport is observed. The magnetic diffusion, d{sub m}[A. B. Rechester and M. N. Rosenbluth, Phys. Rev. Lett 40, 38 (1978)], is used to quantify the degree of stochasticity and related to the electron heat transport for hundreds of time slices in each simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Alfven cascades with downward frequency sweeping

It is suggested that relatively rare, but challenging for the existing theory Alfven cascades with downward frequency sweeping are actually the infernal Alfven eigenmodes (IAEs). Such modes exist in discharges with flat or weakly reversed q-profile in the broad central region, when the value of the safety factor in this region is slightly above the integer or low-order rational. Similar to the toroidal Alfven eigenmode, but in contrast to the ''conventional'' Alfven cascade with upward frequency sweeping, the spectrum of IAE is almost degenerate with respect to the mode numbers. Both features mentioned above are consistent with experimental observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gyrokinetic simulation of momentum transport with residual stress from diamagnetic level velocity shears

Residual stress refers to the remaining toroidal angular momentum (TAM) flux (divided by major radius) when the shear in the equilibrium fluid toroidal velocity (and the velocity itself) vanishes. Previously [Waltz et al., Phys. Plasmas 14, 122507 (2007); errata 16, 079902 (2009)], we demonstrated with GYRO [Candy and Waltz, J. Comp. Phys. 186, 545 (2003)] gyrokinetic simulations that TAM pinching from (ion pressure gradient supported or diamagnetic level) equilibrium ExB velocity shear could provide some of the residual stress needed to support spontaneous toroidal rotation against normal diffusive loss. Here we show that diamagnetic level shear in the intrinsic drift wave velocities (or ''profile shear'' in the ion and electron density and temperature gradients) provides a comparable residual stress. The individual signed contributions of these small (rho-star level) ExB and profile velocity shear rates to the turbulence level and (rho-star squared) ion energy transport stabilization are additive if the rates are of the same sign. However because of the additive stabilization effect, the contributions to the small (rho-star cubed) residual stress is not always simply additive. If the rates differ in sign, the residual stress from one can buck out that from the other (and in some cases reduce the stabilization.) The residual stress from these diamagnetic velocity shear rates is quantified by the ratio of TAM flow to ion energy (power) flow (M/P) in a global GYRO core simulation of a ''null'' toroidal rotation DIII-D [Mahdavi and Luxon, Fusion Sci. Technol. 48, 2 (2005)] discharge by matching M/P profiles within experimental uncertainty. Comparison of global GYRO (ion and electron energy as well as particle) transport flow balance simulations of TAM transport flow in a high-rotation DIII-D L-mode quantifies and isolates the ExB shear and parallel velocity (Coriolis force) pinching components from the larger ''diffusive'' parallel velocity shear driven component and the much smaller profile shear residual stress component.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Role of fluctuations and flows in sustaining mean profiles in a current less toroidal plasma

The flow and fluctuation measurements in a simple magnetized current less toroidal plasma have been conducted. The measured plasma parameter profiles are observed to be accompanied by large fluctuations. The existence of large fluctuations and filling of plasma in the entire radial domain are observed to be closely related to each other. The ExB drift velocities calculated from the gradient of measured mean plasma potential profile have shown significant deviation from the net flow velocity measurements. Interestingly, it is observed that the measured fluctuation driven flow velocity, which is opposite in direction to the mean field driven flow, partially accounts for the observed difference between the net flow and the mean electric field driven flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atomic and Molecular Collisional Radiative Modeling for Spectroscopy of Low Temperature and Magnetic Fusion Plasmas

The quantitative analysis of spectroscopic data from low temperature plasmas is strongly supported from collisional radiative (CR) modeling. Low pressure plasmas for basic research in the lab and for industrial use have several aspects in common with the cold edge of magnetic fusion plasmas. On the basis of applications of CR modeling for atomic and molecular hydrogen, molecular nitrogen, and diatomic radicals such as CH and C{sub 2}, the relevance of individual processes for data interpretation is demonstrated for ionizing and recombining plasmas. Examples of such processes are opacity, dissociative excitation, dissociative recombination, mutual neutralization, and energy pooling. It is shown that the benchmark of CR modeling with experimental data can be used to identify problems in the ingoing data set of cross sections and rate coefficients. Using the flexible solver Yacora, the capability of CR modeling of low temperature plasmas is highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Integration Of SIMS Into A General Purpose IBA Data Analysis Code

IBA techniques such as RBS, ERDA, NRA, or PIXE are highly complementary, and are often combined to maximize the extracted information. In particular, they have different sensitivities to various elements and probe different depth scales. The same is true for secondary ion mass spectrometry (SIMS), that can have much better detection limits for many species. Quantification of SIMS data normally requires careful calibration of the exact system being studied, and often the results are only semi-quantitative. Nevertheless, when SIMS is used together with other IBA techniques, it would be highly desirable to integrate the data analysis. We developed a routine to analyse SIMS data, and implemented it in NDF, a standard IBA data analysis code, that already supported RBS, ERDA, resonant and non-resonant NRA, and PIXE. Details of this new routine are presented in this work.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ITG sideband coupling models for zonal flows

Four-wave interaction model between ITG mode and zonal flow was derived using fluid equations. In this model, the zonal flow is excited non-linearly by ITG turbulence via Reynolds stress. Numerical simulations show that the system allows for a small range above the ITG threshold where the zonal flow can stabilize an unstable ITG mode, effectively increasing {eta}{sub i} threshold, an effect which has been called the Dimits shift. However, the shift is smaller than in known cases such that in the Cyclone base.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗