Search NASA⌕ Search

SEARCH · Search NASA

Results for “TRANSFER OF TRAINING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Global Variability of Mesoscale Convective System Anvil Structure from A-Train Satellite Data

Mesoscale convective systems (MCSs) in the tropics produce extensive anvil clouds, which significantly affect the transfer of radiation. This study develops an objective method to identify MCSs and their anvils by combining data from three A-train satellite instruments: Moderate Resolution Imaging Spectroradiometer (MODIS) for cloud-top size and coldness, Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) for rain area size and intensity, and CloudSat for horizontal and vertical dimensions of anvils. The authors distinguish three types of MCSs: small and large separated MCSs and connected MCSs. The latter are MCSs sharing a contiguous rain area. Mapping of the objectively identified MCSs shows patterns of MCSs that are consistent with previous studies of tropical convection, with separated MCSs dominant over Africa and the Amazon regions and connected MCSs favored over the warm pool of the Indian and west Pacific Oceans. By separating the anvil from the raining regions of MCSs, this study leads to quantitative global maps of anvil coverage. These maps are consistent with the MCS analysis, and they lay the foundation for estimating the global radiative effects of anvil clouds. CloudSat radar data show that the modal thickness of MCS anvils is about 4-5 km. Anvils are mostly confined to within 1.5-2 times the equivalent radii of the primary rain areas of the MCSs. Over the warm pool, they may extend out to about 5 times the rain area radii. The warm ocean MCSs tend to have thicker non-raining and lightly raining anvils near the edges

Yuan, Jian↗
NASA NTRS2020

Neural Network Reflectance Prediction Model for Both Open Ocean and Coastal Waters

Remote sensing of global ocean color is a valuable tool for understanding the ecology and biogeochemistry of the worlds oceans, and provides critical input to our knowledge of the global carbon cycle and the impacts of climate change. Ocean polarized reflectance contains information about the constituents of the upper ocean euphotic zone, such as colored dissolved organic matter (CDOM), sediments, phytoplankton, and pollutants. In order to retrieve the information on these constituents, remote sensing algorithms typically rely on radiative transfer models to interpret water color or remote-sensing reflectance; however, this can be resource-prohibitive for operational use due to the extensive CPU time involved in radiative transfer solutions. In this work, we report a fast model based on machine learning techniques, called Neural Network Reflectance Prediction Model (NNRPM), which can be used to predict ocean bidirectional polarized reflectance given inherent optical properties of ocean waters. This supervised model is trained using a large volume of data derived from radiative transfer simulations for coupled atmosphere and ocean systems using the successive order of scattering technique (SOS-CAOS). The performance of the model is validated against another large independent test dataset generated from SOS-CAOS. The model is able to predict both polarized and unpolarized reflectances with an absolute error (AE) less than 0.004 for 99% of test cases. We have also shown that the degree of linear polarization (DoLP) for unpolarized incident light can be predicted with an AE less than 0.002 for 99% of test cases. In general, the simulation time of SOS-CAOS depends on optical depth, and required accuracy. When comparing the average speeds of the NNRPM against the SOS-CAOS model for the same parameters, we see that the NNRPM is able to predict the Ocean BRDF 6000 times faster than SOS-CAOS. Both ultraviolet and visible wavelengths are included in the model to help differentiate between dissolved organic material and chlorophyll in the study of the open ocean and the coastal zone. The incorporation of this model into the retrieval algorithm will make the retrieval process more efficient, and thus applicable for operational use with global satellite observations.

radiative transfer↗
NASA NTRS2012

Why Games Work and the Science of Learning

In 2010, the Navy formally added the Damage Control Trainer (DCT) to the recruit training program at Great Lakes, Illinois. Despite the incredibly dense training schedule at the Navy's boot camp, the instructors were willing to set aside two hours of time for recruits to play a game. Why? Because it worked. Even with just one hour of play, research showed that recruits gained a 50-80% improvement in performance that transferred to Battle Stations 21 (B821), the Navy's capstone training event. This paper explores why games makes these kinds of results possible. It argues that the things that are known to improve learning are almost exactly the same reasons why games work: the time-honored laws of learning. It concludes that the traditional gulf between instructional design and game design is really an issue of perspective, rather than fundamentals.

Murphy, Curtiss↗
NASA NTRSDate not supplied

Satellite-Derived Imagery and Transfer Learning: A Novel Technique for Land Cover Classification

Land cover classification is a continuing research topic due to its relevance to land use and land cover changes from impacts such as climate change, agriculture, urbanization, and hazardous weather. Simple access to frequently changing land cover classifications could provide knowledge and decision support to various researchers and agencies across the globe for each of above-mentioned and related influences. This research aims to provide a novel technique for land cover classification of remote sensing imagery; harnessing Artificial Neural Networks and transfer learning (TL). Knowledge sharing techniques within machine learning are typically utilized when training datasets are sparse or transitions between data modalities is required. In this case, two data modalities, multi and hyperspectral data, are considered for knowledge transfer. The large number of continuous spectral bands available from hyperspectral sensors typically provide increased sophisticated land classification capability compared to more traditional multispectral imagery with limited discrete spectral bands. However, large-scale, frequent access to hyperspectral imagery is relatively limited. The proposed classification technique would therefore prove useful in regions in which hyperspectral data are not readily available for classification but multispectral data are. Image segmentation models are trained on each multi and hyperspectral datasets. Knowledge sharing techniques are then applied to each model to understand what knowledge, if any, is gained when moving between the data modalities. The datasets utilized for training and testing a U-Net model include the European Space Agency’s multispectral imager Sentinel-2 and the hyperspectral German Aerospace Center’s Earth Sensing Imaging Spectrometer (DESIS). Initially, only two classes, land and water, are classified for simplicity. However, more complex classes can be added if knowledge sharing is successful. The workflow for image classification through supervised image segmentation with a U-Net model will be discussed along with metrics calculated before and after TL for both Sentinel-2 and DESIS data are applied. Additionally, future steps to advance the sophistication of this technique as well as other applicable methodologies will be explored.

Emily Foshee↗
NASA NTRS1999

Ninth Thermal and Fluids Analysis Workshop Proceedings

The Ninth Thermal and Fluids Analysis Workshop (TFAWS 98) was held at the Ohio Aerospace Institute in Cleveland, Ohio from August 31 to September 4, 1998. The theme for the hands-on training workshop and conference was "Integrating Computational Fluid Dynamics and Heat Transfer into the Design Process." Highlights of the workshop (in addition to the papers published herein) included an address by the NASA Chief Engineer, Dr. Daniel Mulville; a CFD short course by Dr. John D. Anderson of the University of Maryland; and a short course by Dr. Robert Cochran of Sandia National Laboratories. In addition, lectures and hands-on training were offered in the use of several cutting-edge engineering design and analysis-oriented CFD and Heat Transfer tools. The workshop resulted in international participation of over 125 persons representing aerospace and automotive industries, academia, software providers, government agencies, and private corporations. The papers published herein address issues and solutions related to the integration of computational fluid dynamics and heat transfer into the engineering design process. Although the primary focus is aerospace, the topics and ideas presented are applicable to many other areas where these and other disciplines are interdependent.

Sakowski, Barbara↗
NASA NTRSDate not supplied

Using Federated Learning to Overcome Data Gravity in Space

Humans intend to take longer missions to outer space. Understanding the impact that space has on human health is paramount to the success of these missions. Controlled experiments with model organisms are run to infer the impact of space conditions on human health, but the data these experiments generate are too large to transfer to Earth for building models. The same is true for space-relevant data generated on Earth. Ideally, these datasets should be combined to improve statistical power and model accuracy without having to transfer data. Federated learning is such a method which trains an algorithm across decentralized computing systems, each of which has their own local copy of training and testing data. In this research, made possible by NASA@Work, the AI for Life in Space group at NASA demonstrates the use of federated learning to train an ensemble of causality inference models on a combination of data residing on the International Space Station (ISS) and in the cloud. Our work leverages CRISP, a causal inference platform developed during the 2020 Frontier Development Lab’s “Astronaut Health Challenge.” We also leverage the OpenFL federated learning library which was collaboratively developed at Intel and UPenn. We used publicly available data from the NASA Ames Life Sciences Data Archive to identify features in ionizing radiation experiments as causal of changes in cardiac blood velocity. This research demonstrates, for the first time, the possibility of running machine learning algorithms on datasets separated by astronomical distances. In this experiment, all the data were generated in terra, half of which were transferred to the ISS and analyzed on the Spaceborne Computer. In the future, our research will leverage federated learning on data generated in situ on the ISS with data generated terrestrially to predict the impact of spaceflight on mammalian female reproductive capacity.

James Casaletto↗
NASA NTRS2002

Superfinished Surfaces for Power Transfer Systems Improvement

The continuous demands for high performance and lightweight power train systems resulted in requirements for higher power density gearing systems. However, increasing the load bearing capacity of the gear teeth, without increasing size, places stringent requirements upon metallurgy, dimensional control, and surface finish of the final products. In order to operate the mating parts near the upper bounds of their theoretical design envelope, manufacturing processes are required that are capable of improving the fatigue life and load bearing capacity of precision parts, while producing the required geometric accuracy. Results of the recent experimental studies indicate that the super finishing process is able to achieve these goals. This paper will review the results of our continuing evaluation of the super finish process as applied to aerospace gearing. Two separate evaluations were performed on gears to examine the effects of super finishing on resistance to both pitting and contact fatigue. For the reported experiments, both conventional and super finished test gears were simultaneously manufactured using the same process and the same heat lot of materials. This paper will also provide a brief description of the manufacturing technology used to achieve the results and will compare the results with other published data. In addition, this paper presents a couple of off-the-shelf manufacturing technologies that have been successfully used to super finish test specimens and will provide a glimpse of other emerging super finishing technologies. This is a US Army Manufacturing Technology project. The project was sponsored by the Aviation and Missiles Command (AMCOM) and was being managed and conducted by IIT Research Institute.

Niskanen, Paul↗
NASA NTRS2001

STS-108 Crew Training Clip

This video shows the crew of STS-108, Commander Dominic Gorie, Pilot Mark Kelly, and Mission Specialists Linda Godwin and Daniel Tani, during various parts of their training, including T-38 operations at Ellington, bail-out training (with the Expedition 4 crew: Commander Yuri Onufrienko and Flight Engineers Carl Walz and Daniel Bursch) in CCT2, extravehicular activity (EVA) preparations, Space Station Mockup and Test/Training Facility (SSMTF) transfer and hands-on familiarization (also with E4), Remote Manipulator System training, EVA training in the Neutral Buoyancy Laboratory, and in a payload training class.

Source record↗
NASA NTRS2000

A New Neural Network Approach Including First-Guess for Retrieval of Atmospheric Water Vapor, Cloud Liquid Water Path, Surface Temperature and Emissivities Over Land From Satellite Microwave Observations

The analysis of microwave observations over land to determine atmospheric and surface parameters is still limited due to the complexity of the inverse problem. Neural network techniques have already proved successful as the basis of efficient retrieval methods for non-linear cases, however, first-guess estimates, which are used in variational methods to avoid problems of solution non-uniqueness or other forms of solution irregularity, have up to now not been used with neural network methods. In this study, a neural network approach is developed that uses a first-guess. Conceptual bridges are established between the neural network and variational methods. The new neural method retrieves the surface skin temperature, the integrated water vapor content, the cloud liquid water path and the microwave surface emissivities between 19 and 85 GHz over land from SSM/I observations. The retrieval, in parallel, of all these quantities improves the results for consistency reasons. A data base to train the neural network is calculated with a radiative transfer model and a a global collection of coincident surface and atmospheric parameters extracted from the National Center for Environmental Prediction reanalysis, from the International Satellite Cloud Climatology Project data and from microwave emissivity atlases previously calculated. The results of the neural network inversion are very encouraging. The r.m.s. error of the surface temperature retrieval over the globe is 1.3 K in clear sky conditions and 1.6 K in cloudy scenes. Water vapor is retrieved with a r.m.s. error of 3.8 kg/sq m in clear conditions and 4.9 kg/sq m in cloudy situations. The r.m.s. error in cloud liquid water path is 0.08 kg/sq m . The surface emissivities are retrieved with an accuracy of better than 0.008 in clear conditions and 0.010 in cloudy conditions. Microwave land surface temperature retrieval presents a very attractive complement to the infrared estimates in cloudy areas: time record of land surface temperature will be produced.

Aires, F.↗
NASA NTRS2007

Evaluating Trauma Sonography for Operational Use in the Microgravity Environment

Sonography is the only medical imaging modality aboard the ISS, and is likely to remain the leading imaging modality in future human space flight programs. While trauma sonography (TS) has been well recognized for terrestrial trauma settings, the technique had to be evaluated for suitability in space flight prior to adopting it as an operational capability. The authors found the following four-phased evaluative approach applicable to this task: 1) identifying standard or novel terrestrial techniques for potential use in space medicine; 2) developing and testing these techniques with suggested modifications on the ground (1g) either in clinical settings or in animal models, as appropriate; 3) evaluating and refining the techniques in parabolic flight (0g); and 4) validating and implementing for clinical use in space. In Phase I of the TS project, expert opinion and literature review suggested TS to be a potential screening tool for trauma in space. In Phase II, animal models were developed and tested in ground studies, and clinical studies were carried out in collaborating trauma centers. In Phase III, animal models were flight-tested in the NASA KC-135 Reduced Gravity Laboratory. Preliminary results of the first three phases demonstrated potential clinical utility of TS in microgravity. Phase IV studies have begun to address crew training issues, on-board imaging protocols, and data transfer procedures necessary to offer the modified TS technique for space use.

Kirkpatrick, Andrew W.↗
NASA NTRS2016

Development of a Fast and Accurate PCRTM Radiative Transfer Model in the Solar Spectral Region

A fast and accurate principal component-based radiative transfer model in the solar spectral region (PCRTMSOLAR) has been developed. The algorithm is capable of simulating reflected solar spectra in both clear sky and cloudy atmospheric conditions. Multiple scattering of the solar beam by the multilayer clouds and aerosols are calculated using a discrete ordinate radiative transfer scheme. The PCRTM-SOLAR model can be trained to simulate top-of-atmosphere radiance or reflectance spectra with spectral resolution ranging from 1 cm(exp −1) resolution to a few nanometers. Broadband radiances or reflectance can also be calculated if desired. The current version of the PCRTM-SOLAR covers a spectral range from 300 to 2500 nm. The model is valid for solar zenith angles ranging from 0 to 80 deg, the instrument view zenith angles ranging from 0 to 70 deg, and the relative azimuthal angles ranging from 0 to 360 deg. Depending on the number of spectral channels, the speed of the current version of PCRTM-SOLAR is a few hundred to over one thousand times faster than the medium speed correlated-k option MODTRAN5. The absolute RMS error in channel radiance is smaller than 10(exp −3) mW∕cm)exp 2)∕sr∕cm(exp −1) and the relative error is typically less than 0.2%.

Liu, Xu↗
NASA NTRSDate not supplied

Close out the Critical Commitment for System Wide Safety’s Technical Challenge 3 (TC 3)

- Deliver validated methods and recommended practices to reduce certification costs for ground and onboard vehicle guidance and control systems through expanded acceptability of analysis as evidence for certification FY 2022. - Communicate results to maximize public awareness of the research and transfer capabilities via a set of on-demand training seminars and supporting materials including reports, publications and open source software codes where applicable.

Joseph C Coughlan↗
NASA NTRSDate not supplied

Neo – Mars Adaptive Training Integrative Knowledge System (MATRIKS) to Improve Operational Performance and its Neural Basis for Spaceflight

With prolonged mission durations, spaceflight crews will become increasingly dependent on onboard technologies for knowledge acquisition and maintenance. It is expected that not all skills and knowledge required for these missions can be retained and retrieved based on pre-mission training alone. Limited and delayed communication will significantly constrain support from Mission Control and crews will increasingly rely on autonomous onboard technologies to successfully perform post-landing operations. With the present project we will target NASA’s particular interest in developing and assessing an adaptive, just-in-time countermeasure that will consolidate and improve skills that are most relevant to space flight operations. To achieve this aim, NASA established a Virtual NASA Specialized Center of Research (VNSCOR)referred to as “Mars Adaptive Training Integrative Knowledge System (MATRIKS)”, comprising the following three projects: (1) “Trinity–Multi-Environment Virtual Training for Long Duration Exploration Missions”, PI: A. Anderson (UC Boulder); (2) “Morpheus–A Haptic Sensory Supplement to Optimize In-Flight Adaptive Training for Human Control of Spacecraft Robotic Arms”, PI: S. Robinson, UC Davis); and the present project “Neo–Adaptive Training integrative knowledge System to Improve Operational Performance and its Neural Basis for Spaceflight” (UPenn, PI: A.C. Stahn). Neo leverages a validated workstation called 6DF that simulates a rendezvous and docking maneuver using real spacecraft flight dynamics. It is designed to (1) train and improve sensorimotor skills relevant for inflight and post-landing operational tasks; (2) feature an autonomous and adaptive training approach that does not rely on feedback from flight operations on the ground; (3) maximize the transfer of mission-relevant motor skills; (4) allow the assessment of the neural circuitry underlying the task; and (5) deliver the training in a motivating and meaningful way to astronauts. Neocomprises two overarching aims: First, we will identify the neural circuitry underlying spaceflight relevant tasks by performing a subset of the 6DFtaskduring functional magnetic resonance imaging (MRI)in a total of up to N=30 subjects with varying levels of 6DF training experience. Second, as part of the above-mentioned VNSCOR MATRIKS the proposed 6DF autonomous intelligent tutor system will be integrated in an additive manner with a haptic feedback intervention (Morpheus), and a multi-environment virtual trainer(Trinity).It is expected that Neo, Morpheus and Trinity mutually complement each other to facilitate an effective countermeasure tool to acquire and retain operational skills that are critical for exploration class missions. To assess the efficacy of this combined effort, the VNSCOR MATRIKS will collect data inN=16 crew members in one HERA campaign of 45 days duration with N=16 crew members(four missions with N=4 crew member seach).The primary goal is to identify changes in operational performance as assessed by NASA’s simulator of Canadarm2 operations, i.e., Robotic On-board Trainer (ROBoT-r) in response to MATRIKS. As part of Neo we will also identify if, and to what extent MATRIKS will promote transfer to general cognitive performance (Cognition battery), distinctive visuo-spatial tasks critical for telerobotic tasks (Spatial Cognition battery), and affect brain structural changes and the neural circuitry of key brain networks expected to be relevant for spaceflight-related performance. At the conclusion of the research, we will have defined and demonstrated the use of a neuroscience-based, adaptive training integrative knowledge system to potentially mitigate visuo-spatial and sensorimotor brain changes associated with prolonged isolation and confinement to reduce the likelihood or impact of potential decrements in human performance capabilities during long-duration space missions. The expected significance of this 4-year project relates to its relevance for facilitating effective countermeasure tools to acquire and retain operational skills that are critical for exploration class missions. This will support the development of necessary countermeasures and technologies in support of human space exploration, focusing on mitigating operational performance risks.

A C Stahn↗
NASA NTRSDate not supplied

Improving Sim-to-Real Transfer in Vision-Based Robot Navigation Via Instance-Level GAN-Based Data Augmentation

Achieving robust vision-based robotic tasks requires large amounts of data, which are often difficult to obtain in real-world scenarios. Simulators and synthetic data offer a cost-effective alternative, but the visual gap between simulation and reality hinders the performance of models when deployed in real-world environments. In this paper, we present a data augmentation pipeline that integrates a foundation model (Segment Anything Model) with an unsupervised image-to-image translation model (CycleGAN) for instance-level domain transfer from simulation to reality. This pipeline enables the generation of realistic labeled data from synthetic images for training supervised machine learning models in vision-based navigation tasks. We evaluate our approach on real-world data for ego-vehicle pose estimation, a critical autonomous navigation task involving the prediction of cross-track position and heading angle relative to road center line markings. The results of our tests show that our GAN-based data augmentation pipeline significantly outperforms models trained solely on simulation data or on data processed with standard image augmentation methods for sim-to-real transfer, enhancing model robustness and generalizability in real-world scenarios. Our method provides a scalable and flexible data augmentation tool for leveraging large synthetic datasets to enhance vision-based robotic navigation tasks.

artificial intelligence↗
NASA NTRSDate not supplied

AMSR-2 Daily Snow Depth Data Product Using a Neural Network Algorithm Trained by Collocated ICESat-2 Measurements

By using diffusion theory and Monte Carlo lidar radiative transfer simulations, Hu 1 et al. (2022b) has derived snow depth from the first-, second- and third-order moments of the lidar backscattering pathlength distribution. Lu 2 et al. (2022,2024) calculated the snow depth by applying the methods to the satellite ICESat-2 lidar measurements over the Arctic sea ice, as well as land surfaces of Northern Hemisphere. In this paper, a neural network (NN) algorithm, employing several channels from AMSR-2 and the humidity vertical profiles GMAO GEOS-IT, is trained to determine snow depth identified by time and geolocation matched 2019 ICESat-2 snow-depth data during winter months over the Arctic sea ice. The trained NN snow-depth was applied to 2014-2020 AMSR-2 clear pixel data, although the algorithms perform reasonably well in thinner clouds. This paper used AMSR-2 data, a passive microwave instrument to generate a wide range of snow depth data, covering extensive spatial areas in the cross-orbit direction.

Neural Network↗
NASA NTRS1990

Project LOCOST: Laser or Chemical Hybrid Orbital Space Transport

A potential mission in the late 1990s is the servicing of spacecraft assets located in GEO. The Geosynchronous Operations Support Center (GeoShack) will be supported by a space transfer vehicle based at the Space Station (SS). The vehicle will transport cargo between the SS and the GeoShack. A proposed unmanned, laser or chemical hybrid orbital space transfer vehicle (LOCOST) can be used to efficiently transfer cargo between the two orbits. A preliminary design shows that an unmanned, laser/chemical hybrid vehicle results in the fuel savings needed while still providing fast trip times. The LOCOST vehicle receives a 12 MW laser beam from one Earth orbiting, solar pumped, iodide Laser Power Station (LPS). Two Energy Relay Units (ERU) provide laser beam support during periods of line-of-sight blockage by the Earth. The baseline mission specifies a 13 day round trip transfer time. The ship's configuration consist of an optical train, one hydrogen laser engine, two chemical engines, a 18 m by 29 m box truss, a mission-flexible payload module, and propellant tanks. Overall vehicle dry mass is 8,000 kg. Outbound cargo mass is 20,000 kg, and inbound cargo mass is 6,000 kg. The baseline mission needs 93,000 kg of propellants to complete the scenario. Fully fueled, outbound mission mass is 121,000 kg. A regeneratively cooled, single plasma, laser engine design producing a maximum of 768 N of thrust is utilized along with two traditional chemical engines. The payload module is designed to hold 40,000 kg of cargo, though the baseline mission specifies less. A proposed design of a laser/chemical hybrid vehicle provides a trip time and propellant efficient means to transport cargo from the SS to a GeoShack. Its unique, hybrid propulsion system provides safety through redundancy, allows baseline missions to be efficiently executed, while still allowing for the possibility of larger cargo transfers.

Dixon, Alan↗
NASA NTRS1986

Automation, robotics, and inflight training for manned Mars missions

The automation, robotics, and inflight training requirements of manned Mars missions will be supported by similar capabilities developed for the space station program. Evolutionary space station onboard training facilities will allow the crewmembers to minimize the amount of training received on the ground by providing extensive onboard access to system and experiment malfunction procedures, maintenance procedures, repair procedures, and associated video sequences. Considerable on-the-job training will also be conducted for space station management, mobile remote manipulator operations, proximity operations with the Orbital Maneuvering Vehicle (and later the Orbit Transfer Vehicle), and telerobotics and mobile robots. A similar approach could be used for manned Mars mission training with significant additions such as high fidelity image generation and simulation systems such as holographic projection systems for Mars landing, ascent, and rendezvous training. In addition, a substantial increase in the use of automation and robotics for hazardous and tedious tasks would be expected for Mars mission. Mobile robots may be used to assist in the assembly, test and checkout of the Mars spacecraft, in the handling of nuclear components and hazardous chemical propellent transfer operations, in major spacecraft repair tasks which might be needed (repair of a micrometeroid penetration, for example), in the construction of a Mars base, and for routine maintenance of the base when unmanned.

Holt, Alan C.↗
NASA NTRS2012

Specificity and Transfer in Learning How to Follow Navigation Instructions

We report a series of experiments that use a navigation task in which instructions for navigating in a space displayed as grids on a computer screen are given to subjects who then attempt to follow them by mouse clicking on the grids. The navigation task was broken down into component dimensions (e.g., presentation mode of the instructions, length of the instructions, characteristics of the display, size of the grids, response type). For each task dimension, one condition was used at training and the same or another condition was used at test. Each task dimension was examined in terms of two measures. One measure provided an index of transfer (i.e., better performance at test than at training when test and training involved different conditions), and the other provided an index of specificity (i.e., better performance at test when training and test conditions were the same than when training and test conditions were different). By and large, these two indices were complementary, so there was evidence of either transfer or specificity but not both. For one dimension transfer but no specificity was evident, and for another dimension specificity but no transfer was evident. For the remaining dimensions, however, there was asymmetrical transfer, with transfer evident for some conditions and specificity evident for others. The findings are interpreted within the procedural reinstatement framework. They have practical implications concerning how to optimize training and how much fidelity to the testing situation is necessary when training.

Healy, Alice F.↗