Search NASA⌕ Search

SEARCH · Search NASA

Results for “TiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Effect of Coadsorbed Water on the Photodecomposition of Acetone on TiO2(110)

The influence of coadsorbed water on the photodecomposition of acetone on TiO2 was examined using temperature programmed desorption (TPD) and the rutile TiO2(110) surface as a model photocatalyst. Of the two major influences ascribed to water in the heterogeneous photocatalysis literature (promotion via OH radical supply and inhibition due to site blocking), only the negative influence of water was observed. As long as the total water and acetone coverage was maintained well below the first layer saturation coverage (‘1 ML’), little inhibition of acetone photodecomposition was observed. However, as the total water+acetone coverage exceeded 1 ML, acetone was preferentially displaced from the first layer to physisorbed states by water and the extent of acetone photodecomposition attenuated. The displacement originated from water compressing acetone into high coverage regions where increased acetone-acetone repulsions caused displacement from the first layer. The immediate product of acetone photodecomposition was adsorbed acetate, which occupies twice as many surface sites per molecule as compared to acetone. Since the acetate intermediate was more stable on the TiO2(110) surface than either water or acetone (as gauged by TPD) and since its photodecomposition rate was less than that of acetone, additional surface sites were not opened up during acetone photodecomposition for previously displaced acetone molecules to re-enter the first layer. Results in this study suggest that increased molecular-level repulsions between organic molecules brought about by increased water coverage are as influential in the inhibiting effect of water on photooxidation rates as are water-organic repulsions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-Organized Amorphous TiO2 Nanotube Arrays on Porous Ti Foam for Rechargeable Lithium and Sodium Ion Batteries

Self-organized amorphous TiO2 nanotube arrays (NTAs) were successfully fabricated on both Ti foil and porous Ti foam through electrochemical anodization techniques. The starting Ti foams were fabricated using ARCAM s Electron Beam Melting (EBM) technology. The TiO2 NTAs on Ti foam were used as anodes in lithium ion batteries; they exhibited high capacities of 103 Ahcm-2 at 10 Acm-2 and 83 Ahcm-2 at 500 Acm-2, which are two to three times higher than those achieved on the standard Ti foil, which is around 40 Ahcm-2 at 10 Acm-2 and 24 Ahcm-2 at 500 Acm-2, respectively. This improvement is mainly attributed to higher surface area of the Ti foam and higher porosity of the nanotube arrays layer grown on the Ti foam. In addition, a Na-ion half-cell composed of these NTAs anodes and Na metal showed a self-improving specific capacity upon cycling at 10 Acm-2. These results indicate that TiO2 NTAs grown on Ti porous foam are promising electrodes for Li-ion or Na-ion rechargeable batteries.

Bi, Zhonghe↗

Influence of nitrogen content levels on structural properties and photocatalytic activities of nanorice-like N-doped TiO2 with various calcination temperatures

Highlights: • Hydrothermal method enhances the integration of N species into TiO{sub 2}. • TiO{sub 2} doping with nitrogen prevents the phase transformation from anatase to rutile. • The N-doped TiO{sub 2} exhibits nanorice-like morphology. • Nitrogen atom incorporates into the lattice of TiO{sub 2} with interstitial site (TiON). • Nitrogen doping content in TiO{sub 2} accelerates the kinetic rate of photocatalytic reaction. - Abstract: The purposes of this research were to study the effect of nitrogen content levels on structural properties and photocatalytic activities of catalysts with various calcination temperatures and to test the photocatalytic degradation of paraquat under UV and visible light. The results showed that the effect of calcination temperature was significant on physical properties and amount of nitrogen element, but insignificant on phase structure and oxidation state of titanium (Ti) atom. The N-doped TiO2 samples demonstrated only anatase phase because nitrogen dopant in TiO2 restrained the phase transformation from anatase to rutile and displayed nanorice-like morphology. The bandgap energy was about 3.07–3.18 eV. The nitrogen content was only observed at 100, 300 and 400 °C. The nitrogen (N) atom can be incorporated in TiO2 structural lattice with interstitial site. The specific surface area and nitrogen content level showed the important roles for the photodegradation of paraquat under UV and visible light irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of oxygen and titanium diffusion at the anatase TiO2(001) surface

The diffusion of intrinsic defects in a single crystal anatase TiO2(001) film was explored by isotopic labeling and static secondary ion mass spectrometry. Using both 46Ti and 18O as isotopic labels, we show that the anatase surface responds to redox imbalances by diffusion of both Ti and O into the bulk under vacuum reduction and (at least) Ti from the bulk to the surface during oxidation. The diffusion of Ti between the bulk and surface in anatase TiO2(001) closely resembles what was observed in the literature for the rutile TiO2(110) surface, however the latter is not known to have oxygen diffusion between the bulk and surface under typical ultrahigh vacuum conditions. We speculate that the open lattice of the anatase bulk structure may facilitate independent diffusion of both point defects (Ti interstitials and O vacancies) or concerted diffusion of "TiO" subunits. The authors gratefully acknowledge S.A. Chambers of Pacific Northwest National Laboratory (PNNL) for providing the anatase samples. This research was supported by the U.S. Department of Energy (DOE) Office of Basic Energy Sciences, Chemical Sciences, Geosciences, and Biosciences Division, the Office of Naval Research Contract Number 200CAR262, and the Oregon Nanoscience and Microtechnologies Institute. PNNL is operated for the U.S. DOE by Battelle under Contract Number DE05-AC76RL0 1830. The research was performed in the William R. Wiley Environmental Molecular Sciences Laboratory, a national scientific user facility funded by the U.S. DOE Office of Biological and Environmental Research.

Herman, Gregory S.↗

Insights into Acetone Photochemistry on Rutile TiO2(110). 1. Off-Normal CH3 Ejection from Acetone Diolate.

Thermal- and photon-stimulated reactions of acetone co-adsorbed with oxygen on rutile TiO2(110) surface are studied with infrared reflection-adsorption spectroscopy (IRAS) combined with temperature programmed desorption and angle-resolved photon stimulated desorption. IRAS results show that n2-acetone diolate ((CH3)2COO) is produced via thermally-activated reactions between the chemisorbed oxygen with co-adsorbed acetone. Formation of acetone diolate is also consistent with 18O / 16O isotopic exchange experiments. During UV irradiation at 30 K, CH3 radicals are ejected from the acetone diolate with a distribution that is peaked at .-. +- 66 degrees from the surface normal along the azimuth (i.e. perpendicular to the rows of bridging oxygen and Ti5c ions). This distribution is also consistent with the orientation of the C–CH3 bonds in the n2-acetone diolate on TiO2(110). The acetone diolate peaks disappear from the IRAS spectra after UV irradiation and new peaks are observed and associated with n2-acetate. The data presented here demonstrate direct signatures of the proposed earlier 2-step mechanism for acetone photooxidation on TiO2(110)

Environmental Molecular Sciences Laboratory↗

Understanding the Binding of Aromatic Hydrocarbons on Rutile TiO2(110)

The adsorption of cyclohexane, benzene, and alkyl-substituted benzene derivatives is studied on rutile TiO2(110) by a combination of molecular beam dosing, temperature programmed desorption, and density functional theory (DFT). An inversion analysis is used to extract the coverage dependent desorption energies from TiO2(110). The values of the suitable prefactors are derived from simple statistical mechanical models assuming different limits in the adsorbate mobility on the surface. The prefactor values determined using the vibrational frequencies from DFT calculations corroborate this analysis and show that the adsorbates are mobile in 1- or 2-dimensions on corrugated TiO2(110) surface. The adsorption of benzene derivatives is found to be dominated by the dative Lewis acid-base interactions of the p system with the surface Ti ions. While the desorption energy generally increases with increasing the length and the number of substituents, the difference between the desorption energies decreases as the number and length of substituents is increased. This is a consequence of the destabilization of the optimum bonding configuration of the benzene ring and the alkyl groups with their increasing length and number. The absolute saturation coverages of uncompressed layers correspond approximately to one molecule per two Ti5c sites and decrease slightly with increasing molecule size in a good agreement with van der Waals sizes of the molecules.

Chen, Long↗

Observation of molecular hydrogen produced from bridging hydroxyls on anatase TiO2(101)

Anatase TiO2 is used extensively in a wide range of catalytic and photocatalytic processes and is a promising catalyst for hydrogen production. Here, we show that molecular hydrogen was produced from bridging hydroxyls, HOb, on the (101) surface of single crystal anatase (a-TiO2(101)). Electron bombardment at 30 K produced bridging oxygen vacancies in the surface. Deuterated bridging hydroxyls, DOb, were subsequently formed via dissociation of adsorbed D2O and confirmed by infrared reflection-absorption spectroscopy. During temperature programmed desorption (TPD) spectroscopy, D2 desorption was observed at 520 K. Density functional theory calculations show that both H2 and H2O production from HOb are endothermic at 0 K on a-TiO2(101), but H2 (H2O) desorption is entropically driven above 230 K (800 K). The calculated activation barrier for H2 desorption is 1.40 eV, which is similar to the desorption energy obtained from analysis of the D2 TPD spectra. The H2 desorption likely proceeds in two steps: H atom diffusion on the surface and then recombination. The calculations indicate that diffusion of the hydrogen atoms into the subsurface could also be an important process. We thank Drs. Z. Dohnalek and R. Rousseau for stimulating discussions. This work was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, & Biosciences and performed in EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for DOE by Battelle. We also acknowledge the WPI computational facilities for providing resources to perform the DFT studies.

Deskins, N A.↗

Impact of Solvent on Photocatalytic Mechanisms: Reactions of Photodesorption Products with Ice Overlayers on the TiO2(110) Surface

The effects of water and methanol ice overlayers on the photodecomposition of acetone on rutile TiO2(110) were evaluated in ultrahigh vacuum (UHV) using photon stimulated desorption (PSD) and temperature programmed desorption (TPD). In the absence of ice overlayers, acetone photodecomposed on TiO2(110) at 95 K by ejection of a methyl radical into the gas phase and formation of acetate on the surface. With ice overlayers, the methyl radicals are trapped at the interface between TiO2(110) and the ice. When water ice was present, these trapped methyl radicals reacted either with each other to form ethane or with other molecules in the ice (e.g., water or displaced acetone) to form methane (CH4), ethane (CH3CH3) and other products (e.g., methanol), with all of these products trapped in the ice. The new products were free to revisit the surface or depart during desorption of the ice. When methanol ice was present, methane formation came about only from reaction of trapped methyl radicals with the methanol ice. Methane and ethane slowly leaked through methanol ice overlayers into vacuum at 95 K, but not through water ice overlayers. Different degrees of site competition between water and acetone, and between methanol and acetone led to different hydrogen abstraction pathways in the two ices. These results provide new insights into product formation routes and solution-phase radical formation mechanisms that are important in heterogeneous photocatalysis.

03 NATURAL GAS↗

Enhanced dopant solubility and visible-light absorption in Cr-N co-doped TiO2 nanoclusters

A major obstacle toward employing TiO2 as an efficient photoactive material is related to its large optical band gap, strongly limiting visible light absorption. Substitutional doping with both donors and acceptors (co-doping) potentially leads to a significant band gap reduction, but the effectiveness of the co-doping approach remains limited by the low solubility of dopants inside TiO2. Here we show that nanostructured Cr and N co-doped TiO2 thin films can be obtained by Supersonic Cluster Beam Deposition (SCBD) with a high concentration of dopants and a strongly reduced band gap. Complementary spectroscopic investigations show that doping effectively occurs into substitutional lattice sites, inducing dopant levels in the gap that are remarkably delocalized. The high surface-to-volume ratio, typical of SCBD nanostructured films, likely facilitates the dopant incorporation. The present results indicate that SCBD films are highly promising photoactive nanophase materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Importance of Diffusion in Methanol Photochemistry on TiO2(110)

The photoactivity of methanol on the rutile TiO2(110) surface is shown to depend on the ability of methanol to diffuse on the surface and find sites active for its thermal dissociation to methoxy. Temperature programmed desorption (TPD) results show that the extent of methanol photodecomposition to formaldehyde is negligible on the clean TiO2(110) surface at 100 K due to a scarcity of sites that can convert (photoinactive) methanol to (photoactive) methoxy. The extent of photoactivity at 100 K significantly increases when methanol is coadsorbed with oxygen, however only those molecules able to adsorb near (next to) a coadsorbed oxygen species are active. Preannealing coadsorbed methanol and oxygen to above 200 K prior to UV irradiation results in a significant increase in photoactivity. Scanning tunneling microscopy (STM) images clearly show that the advent of increased photoactivity in TPD correlates with the onset of methanol diffusion along the surface’s Ti4+ rows at ~200 K. These results demonstrate that optimizing thermal processes (such as diffusion or proton transfer reactions) can be critical to maximizing photocatalytic reactivity on TiO2 surfaces. This work was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle under contract DEAC05-76RL01830. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory.

diffusion↗

Water as a Catalyst: Imaging Reactions of O-2 with Partially and Fully Hydroxylated TiO2(110) Surfaces

The reactions of molecular oxygen with bridging hydroxyl groups, OHb, formed by H2O dissociation on bridging oxygen vacancies of TiO2 (110) are studied at low and high OHb coverages as a function of the O2 exposure, using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and electron simulated desorption (ESD) techniques. On partially hydroxylated surfaces, the sudden simultaneous disappearance of oxygen vacancies and oxygen adatoms formed by O2 dissociation is observed at high O2 exposures. On fully hydroxylated TiO2 surfaces, which enable us to compare results of STM, TPD and ESD studies, most of OHb’s are removed via reacting with O2. Hence, fully hydroxylated TiO2 surfaces can be converted to nearly stoichiometric surfaces, albeit with some amount of adsorbed molecular water. Formation of mobile H2O molecules and water-assisted diffusion of the reactants plays an important role in the kinetics of the processes on both partially and fully hydroxylated surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Porosity and Pore Interconnectivity in Crystalline Mesoporous TiO2 Using Hyperpolarized Xe-129 NMR

Hyperpolarized (HP) 129Xe NMR was used to probe the porosity and interconnectivity of pores in crystalline mesoporous TiO2. We have demonstrated that HP 129Xe NMR can be used to differentiate between similar sized pores within different crystalline phases. Pores of 4 nm size resident in mixed anatase and rutile mesoporous TiO2 phases were identified. Complementary to other techniques, HP 129Xe NMR is able to probe the interconnectivity between pores present in these different phases. The cross peaks in 2D exchange (EXSY) NMR spectra between the signals of xenon in two types of pores on millisecond time scale are clearly visible, indicating substantial pore interconnectivity. Information on porosity and interconnectivity is critical for understanding Li ion transport mechanisms in mesoporous TiO2 anode materials.

36 MATERIALS SCIENCE↗

Oxygen Photochemistry on TiO2(110): Recyclable, Photoactive Oxygen Produced by Annealing Adsorbed O2

Photon-stimulated reactions between chemisorbed and physisorbed oxygen on TiO2(110) are investigated. Experiments using O2 isotopologues show that UV irradiation results in the exchange of atoms between chemisorbed and physisorbed oxygen. Annealing chemisorbed oxygen to {approx}350 K maximizes these exchange reactions, while dissociatively adsorbing oxygen on TiO2(110) at 300 - 350 K does not lead to reactions with physisorbed O2. After annealing to 350 K, the exchange products photodesorb in the plane perpendicular to the bridge-bonded oxygen rows at an angle of 45{sup o}. In contrast, the chemisorbed O2 photodesorbs normal to the surface. Remarkably, the chemisorbed species is stable under multiple cycles of UV irradiation with physisorbed O2. The active atoms in the chemisorbed species can be changed from 18O to 16O and then back to 18O via the exchange reactions. The results show that annealing oxygen adsorbed on TiO2(110) to {approx}350 K produces a stable chemical species with interesting photochemical properties. Possible forms for the photoactive species include O2 adsorbed in a bridging oxygen vacancy or tetraoxygen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Why is anatase a better photocatalyst than rutile? - Model studies on epitaxial TiO2 films

The prototypical photocatalyst TiO2 exists in different polymorphs, the most common forms are the anatase- and rutile-crystal structures. Generally, anatase is more active than rutile, but no consensus exists to explain this difference. Here we demonstrate that it is the bulk transport of excitons to the surface that contributes to the difference. Utilizing high –quality epitaxial TiO2 films of the two polymorphs we evaluate the photocatalytic activity as a function of TiO2-film thickness. For anatase the activity increases for films up to ,5 nm thick, while rutile films reach their maximum activity for ,2.5 nm films already. This shows that charge carriers excited deeper in the bulk contribute to surface reactions in anatase than in rutile. Furthermore, we measure surface orientation dependent activity on rutile single crystals. The pronounced orientation-dependent activity can also be correlated to anisotropic bulk charge carrier mobility, suggesting general importance of bulk charge diffusion for explaining photocatalytic anisotropies.

POLLUTION REMEDIATION↗

Phase Transformations among TiO2 Polymorphs

Polymorphs widely exist in nature and synthetic systems and are well known to determine material properties. Understanding phase transformation mechanisms among polymorphs enables the design of structures and tuning of phases to tailor material properties. However, current understanding is limited due to the lack of direct observations that track the processes and the structural evolution is not known at atomic scale. Here, integrating (semi) in situ transmission electron microscopy and density functional theory, we report atomic structural evolutions of phase transformation from anatase (A) to rutile (R), brookite (B), R-phase, and TiO. Besides the consistent paths with previous reports, we discover several unreported paths, including a [001] direction and (020) plane of anatase to [100]A and (011)R of rutile, respectively, ( , ) and , . Density functional theory analysis elucidates atomic structural evolution during the processes and over 16% of Ti-O bonds break and reform during the processes with energy barriers of ~0.7-1.0 eV per TiO2 formula unit. Under electron-beam irradiation, anatase particles transform into TiO2-R phase or TiO at high or room temperature, respectively. We also reveal the anisotropic nature of electron-beam effect, which is seldom discussed: dependence of crystallographic orientation with respect to electron-beam irradiation direction. Understanding the atomic structural evolution sheds light on interpreting and controlling TiO2 polymorphs and interface structures for various applications. The revealed electron-beam effects in our work provide guidance for in situ transmission electron microscopy studies.

Song, Miao↗

Theoretical study of the molecular and electronic structure of methanol on a TiO2(110) surface

We present density-functional-theory calculations of the molecular and electronic structure of methanol adsorption on stoichiometric TiO2(110) surface. We have investigated 11 different molecular and dissociated adsorption structures of CH3OH at 1 monolayer coverage. The relative stabilities of different structures depend on the chemisorption-induced charge transfer, the relative strengths of different types of hydrogen bonds, the steric hindrance between methyl groups and the surface stress. We found the intermolecular hydrogen bonding to play an important role in stabilizing the overlayer. We also investigated the occupied and unoccupied surface electronic structure, and the adsorbate-induced surface dipole moment and work-function changes. The electronic structures show that the highest-occupied molecular orbital of CH3OH is near the valance-band maximum, which reflects the character of CH3OH as a hole scavenger on TiO2 surfaces. The unoccupied partially solvated or “wet” electron states for CH3OH on TiO2 are primarily distributed on H atoms of methyl groups. Despite many different structural motifs, the wet-electron-state energy primarily correlates with the surface dipole moment.

08 HYDROGEN↗

Vacancy Assisted Diffusion of Alkoxy Species on Rutile TiO2(110)

The catalytic and photocatalytic properties of TiO2 have attracted widespread interest in a variety of applications, such as air purification, self-cleaning glass, water splitting, solar cells and wastewater treatment. In many cases the catalytic chemistry of reducible oxides is dominated by oxygen vacancy sites. For reduced rutile TiO2(110)-1×1, the bridge-bonded oxygen (BBO) vacancies (BBOV’s) are the most prevalent surface defects and, as has been shown, they can readily dissociate small molecules such as H2O, O2, and alcohols.Here we demonstrate for the first time that BBOV’s can also catalyze the transport of adsorbed species which is a key ingredient in heterogeneous catalytic processes. Specifically, we show that at elevated temperatures (≥ 400 K), mobile BBOV’s can assist the diffusion of alkoxy groups formed by the dissociation of alcohols at BBOV’s. This type of mechanism is likely applicable to other adsorbates bound to BBO atoms of TiO2(110).

14 SOLAR ENERGY↗

Structure and enhanced antimicrobial activity of mechanically activated nano TiO2

Titanium dioxide is a photocatalyst, known not only for its ability to oxidize organic contaminants, but also for its antimicrobial properties. In this article, significant enhancement of the antimicrobial activity of TiO2 (up to 32 times) was demonstrated after its activation by ball milling. The antimicrobial activity was analyzed for one fungal and 13 bacterial ATCC strains using the microdilution method and recording the minimum inhibitory concentration (MIC) values. In order to further investigate the correlation between the mechanical activation of TiO2 and its antimicrobial activity, the structure, morphology and phase composition of the material were studied by means of Electron Microscopy, X-ray diffraction and nitrogen adsorption-desorption measurements. UV-Vis diffuse reflectance spectra were recorded and the Kubelka-Munk function was applied to convert reflectance into the equivalent band gap energy (Eg) and, consequently, to investigate changes in the Eg value. X-ray photoelectron spectroscopy was used to analyze the influence of mechanical activation on the Ti 2p and O 1s spectra. The presented results are expected to enable the development of more sustainable and effective advanced TiO2-based materials with antimicrobial properties that could be used in numerous green technology applications.

60 APPLIED LIFE SCIENCES↗