SEARCH · Search NASA

Results for “Traffic loading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Air traffic control surveillance accuracy and update rate study

The results of an air traffic control surveillance accuracy and update rate study are presented. The objective of the study was to establish quantitative relationships between the surveillance accuracies, update rates, and the communication load associated with the tactical control of aircraft for conflict resolution. The relationships are established for typical types of aircraft, phases of flight, and types of airspace. Specific cases are analyzed to determine the surveillance accuracies and update rates required to prevent two aircraft from approaching each other too closely.

Craigie, J. H.↗

NASA NTRSDate not supplied

Flight Demonstration of the Tailored Arrival Manager

A flight demonstration of arrival traffic management automation was conducted in partnership between NASA, FAA and Boeing as an element of the latter’s ecoDemonstrator2020 flight program. For the demonstration, NASA’s prototype Tailored Arrival Manager(TAM) was used to compute efficient trajectory-based solutions to traffic management problems representing those encountered during time-based metering operations today. TAM solutions involving route modifications were uplinked to a Boeing 787 airplane using Controller Pilot Data Link Communications and seamlessly loaded into the airplane’s Flight Management System (FMS). The paper describes the concept and technology behind TAM along with the data exchanges and procedures involved with the demonstration. All TAM solutions were delivered in a timely manner and successfully integrated with the airplane’s FMS, thereby demonstrating the basic feasibility of trajectory-based arrival management using currently available data communications and avionics equipage. Although TAM solutions were not executed during this initial demonstration, a limited study of trajectory prediction accuracy was possible given that the airplane flew uninterrupted, automated descents with known route and speed intent. Analysis revealed that TAM meter-fix arrival time predictions were accurate to within ± 30 seconds for time horizons of 30 minutes or less, which matched closely with FMS predictions acquired through real-time data exchange. Top-of-descent predictions over similar time horizons were found accurate to within ± 5 nautical miles.

Air traffic managment↗

NASA NTRS1965

Effects of the Air Traffic Control System on the Supersonic Transport

A study of the problems anticipated with the introduction of the supersonic transport into the air traffic control system indicated that supersonic transport design allowances for time and fuel for maneuvering during climbouts may not be sufficient, that there is a greater communications-navigation work- load for the supersonic transport than for the subsonic jet transport during descent, and that use of a flight director to command pitch control guidance for the pilot would be helpful.

Norman S. Silsby↗

NASA NTRS1986

A Priority Protocol for Token-Ring Networks

New priority protocol controls access to token-ring local-area network (LAN) of digital-communication stations over widely ranging mix of low- and high-priority traffic. Protocol, called round-robin priority scheme (RRPS), introduces only small overhead and therefore degrades system performance only minimally. Key messages guaranteed access to local-area network during peak loads.

Liu, H. T.↗

NASA NTRS2011

Flexible Airspace Management (FAM) Research 2010 Human-in-the-Loop Simulation

A human-in-the-Ioop (HITL) simulation was conducted to assess potential user and system benefits of Flexible Airspace Management (FAM) concept, as well as designing role definitions, procedures, and tools to support the FAM operations in the mid-term High Altitude Airspace (HAA) environment. The study evaluated the benefits and feasibility of flexible airspace reconfiguration in response to traffic overload caused by weather deviations, and compared them to those in a baseline condition without the airspace reconfiguration. The test airspace consisted of either four sectors in one Area of Specialization or seven sectors across two Areas. The test airspace was assumed to be at or above FL340 and fully equipped Vvith data communications (Data Comm). Other assumptions were consistent with those of the HAA concept. Overall, results showed that FAM operations with multiple Traffic Management Coordinators, Area Supervisors, and controllers worked remarkably well. The results showed both user and system benefits, some of which include the increased throughput, decreased flight distance, more manageable sector loads, and better utilized airspace. Also, the roles, procedures, airspace designs, and tools were all very well received. Airspace configuration options that resulted from a combination of algorithm-generated airspace configurations with manual modifications were well acceptec and posed little difficuIty and/or workload during airspace reconfiguration process. The results suggest a positive impact of FAM operations in HAA. Further investigation would be needed to evaluate if the benefits and feasibility would extend in either non-HAA or mixed equipage environment.

Lee, Paul U.↗

NASA NTRSDate not supplied

Identifying Common Use Cases across Extensible Traffic Management (xTM) for Interactions with Air Traffic Controllers

NASA’s Extensible Traffic Management (xTM) builds on the foundation and the architecture of Unmanned Aircraft Systems (UAS) Traffic Management (UTM) concept and extends it broadly to other domains, such as Advanced / Urban Air Mobility (AAM/UAM) and Upper Class E Traffic Management (ETM). These xTM concepts assume the ability to fly in airspace that is authorized to operate solely under xTM services and mostly without any air traffic control (ATC) support. However, they also assume circumstances in which the xTM vehicles would need to operate in conventional ATC-managed airspace, both during nominal and off-nominal scenarios. Due to the vast differences in the xTM vehicle performances and missions, there is a concern that ATC may have difficulty in safely managing the xTM traffic and providing appropriate services to all vehicles, unless a consistent set of roles, procedures, and data exchange requirements are defined across the diverse set of xTM vehicle operations. In this paper, we describe a set of use cases that have been identified in UTM, AAM/UAM, and ETM operations that are related to ATC interactions, and we propose to categorize these use cases across xTM domains based on common trigger events. Organizing the use cases from the perspective of ATC roles per each trigger event is expected to provide the first step in discovering common procedures and data requirements across xTM domains that could help ease the controllers’ cognitive task load and allow them to manage these interactions more safely.

Extensible Traffic Management (xTM)↗

NASA NTRS1980

A study of a space communication system for the control and monitoring of the electric distribution system. Volume 1: Summary

It is technically feasible to design a satellite communication system to serve the United States electric utility industry's needs relative to load management, real-time operations management, remote meter reading, and to determine the costs of various elements of the system. A definition of distribution control and monitoring functions is given. Associated communications traffic is quantified. A baseline conceptual design in terms of operating capability and equipment is described, important factors to be considered in designing a system are examined, and preliminary cost data are provided. Factors associated with implementation are discussed and conclusions and recommendations are listed.

Vaisnys, A.↗

NASA NTRS2018

Human-in-the-Loop Evaluation of Dynamic Multi-Flight Common Route Advisories

Flights often experience large delays when they are routed around weather. Multi-flight common route advisories provide delay recovery by suggesting time-saving re-routes for groups of flights whose current weather-avoidance routes have become outdated because the weather has dissipated and/or moved away. A laboratory evaluation of these advisories was conducted by four subject matter experts having extensive experience in traffic flow management operations. These experts provided a total of 120 data points in the airspace of Houston Center. The multi-flight common route tool provides time-saving route change advisories taking into account flight plans, wind fields, and the spatio-temporal evolution of predicted convective weather. It is not designed to account for complex operational factors such as non-standard sector traversal and interactions with local traffic management initiatives; hence a relatively low percentage (37%) of advisories generated by the tool were rated as acceptable. However, a high percentage (81%) of advisories were rated as acceptable after the subject matter experts used the tool's user interface to make route modifications that accounted for relevant operational factors not considered by the tool. The workload associated with using the tool, as measured by the NASA Task Load Index, was quite low (1.1 on a scale of 0 to 10). The results of this evaluation make a good case for human-automation teaming to design operationally valid weather re-routes for delay recovery.

Traffic Flow Management↗

NASA NTRS1992

Black carbon (soot) aerosol in the lower stratosphere and upper troposphere

As determined by impactor samplers flown on ER-2 and DC-8 aircraft, black carbon aerosol (BCA) mass loadings in the stratosphere average 0.6 nanograms per standard cubic meter, or 0.01 percent of the total aerosol. Upper tropospheric BCA increases to 0.3 percent. Low stratospheric concentration is commensurate with present commercial air traffic fuel consumption, given the following assumptions: the BCA emissions are 0.1 grams per kilogram of fuel consumed, 10 percent of route mileage is above the tropopause, and average BCA stratospheric residence time is about one year. Taking BCA into account, the stratospheric single scatter albedo is about 0.99. Using parameters for planned supersonic commercial aircraft, whose emissions will be predominantly in the stratosphere, it is shown that such traffic will double stratospheric BCA concentration. This would reduce the aerosol single scattering albedo by one percent, and double the BCA surface area that is available for heterogeneous chemistry.

Pueschel, R. F.↗

NASA NTRS2018

Human-in-the-Loop Evaluation of Dynamic Multi-Flight Common Route Advisories

Traffic Flow Management↗

NASA NTRS2008

Analysis of a Dynamic Multi-Track Airway Concept for Air Traffic Management

The Dynamic Multi-track Airways (DMA) Concept for Air Traffic Management (ATM) proposes a network of high-altitude airways constructed of multiple, closely spaced, parallel tracks designed to increase en-route capacity in high-demand airspace corridors. Segregated from non-airway operations, these multi-track airways establish high-priority traffic flow corridors along optimal routes between major terminal areas throughout the National Airspace System (NAS). Air traffic controllers transition aircraft equipped for DMA operations to DMA entry points, the aircraft use autonomous control of airspeed to fly the continuous-airspace airway and achieve an economic benefit, and controllers then transition the aircraft from the DMA exit to the terminal area. Aircraft authority within the DMA includes responsibility for spacing and/or separation from other DMA aircraft. The DMA controller is responsible for coordinating the entry and exit of traffic to and from the DMA and for traffic flow management (TFM), including adjusting DMA routing on a daily basis to account for predicted weather and wind patterns and re-routing DMAs in real time to accommodate unpredicted weather changes. However, the DMA controller is not responsible for monitoring the DMA for traffic separation. This report defines the mature state concept, explores its feasibility and performance, and identifies potential benefits. The report also discusses (a) an analysis of a single DMA, which was modeled within the NAS to assess capacity and determine the impact of a single DMA on regional sector loads and conflict potential; (b) a demand analysis, which was conducted to determine likely city-pair candidates for a nationwide DMA network and to determine the expected demand fraction; (c) two track configurations, which were modeled and analyzed for their operational characteristic; (d) software-prototype airborne capabilities developed for DMA operations research; (e) a feasibility analysis of key attributes in the concept design; (f) a near-term, transitional application of the DMA concept as a proving ground for new airborne technologies; and (g) conclusions. The analysis indicates that the operational feasibility of a national DMA network faces significant challenges, especially for interactions between DMAs and between DMA and non-DMA traffic. Provided these issues are resolved, sectors near DMAs could experience significant local capacity benefits.

Wing, David J.↗

NASA NTRS2011

Interface Supports Multiple Broadcast Transceivers for Flight Applications

A wireless avionics interface provides a mechanism for managing multiple broadcast transceivers. This interface isolates the control logic required to support multiple transceivers so that the flight application does not have to manage wireless transceivers. All of the logic to select transceivers, detect transmitter and receiver faults, and take autonomous recovery action is contained in the interface, which is not restricted to using wireless transceivers. Wired, wireless, and mixed transceiver technologies are supported. This design s use of broadcast data technology provides inherent cross strapping of data links. This greatly simplifies the design of redundant flight subsystems. The interface fully exploits the broadcast data link to determine the health of other transceivers used to detect and isolate faults for fault recovery. The interface uses simplified control logic, which can be implemented as an intellectual-property (IP) core in a field-programmable gate array (FPGA). The interface arbitrates the reception of inbound data traffic appearing on multiple receivers. It arbitrates the transmission of outbound traffic. This system also monitors broadcast data traffic to determine the health of transmitters in the network, and then uses this health information to make autonomous decisions for routing traffic through transceivers. Multiple selection strategies are supported, like having an active transceiver with the secondary transceiver powered off except to send periodic health status reports. Transceivers can operate in round-robin for load-sharing and graceful degradation.

Block, Gary L.↗

NASA NTRS2014

How Well Does the Latest Anthropomorphic Test Device Mimic Human Impact Responses?

One of the goals of the NASA Occupant Protection Group is to understand the human tolerance to dynamic loading. This knowledge has to come through indirect approaches such as existing human response databases, anthropometric test devices (ATD), animal testing, post‐mortem human subjects, and models. This study investigated the biofidelity of the National Highway Traffic Safety Administration's ATD named the THOR (test device for human occupant restraint). If THOR responds comparably to humans, then it could potentially be used as a human surrogate to help validate space vehicle requirements for occupant protection. The THOR responses to frontal and spinal impacts (ranging from 8 to 12 G with rise times of 40, 70, and 100 ms) were measured and compared to human volunteer responses (95 trials in frontal and 58 in spinal) previously collected by the U. S. Air Force on the same horizontal impact accelerator. The impact acceleration profiles tested are within the expected range of multi‐purpose crew vehicle (MPCV) landing dynamics. A correlation score was calculated for each THOR to human comparison using CORA (CORrelation and Analysis) software. A two‐parameter beta distribution model fit was obtained for each dependent variable using maximum likelihood estimation. For frontal impacts, the THOR head x‐acceleration peak response correlated with the human response at 8 and 10‐G 100 ms but not 10‐G 70 ms. The phase lagged the human response. Head z‐acceleration was not correlated. Chest x‐acceleration was in phase, had a higher peak response, and was well correlated with lighter subjects (Cora = 0.8 for 46 kg vs. Cora = 0.4 for 126 kg). Head x‐displacement had a leading phase. Several subjects responded with the same peak displacement but the mean of the group was lower. The shoulder x‐displacement was in phase but had higher peaks than the human response. For spinal impacts, the THOR head x‐acceleration was not well correlated. Head and chest z‐acceleration was in phase but had a higher peak response. Chest z‐acceleration was highly correlated with heavier subjects at lower G pulses (Cora = 0.86 for 125 kg at 8 G). The human response was variable in shoulder z‐displacement but the THOR was in phase and was comparable to the mean peak response. Head xand z‐displacement was in phase but had higher peaks. Seat pan forces were well correlated, were in phase, but had a larger peak response than most subjects. The THOR does not respond to frontal and spinal impacts exactly the same way that a human does. Some responses are well matched and others are not. Understanding the strengths and weaknesses of this ATD is an important first step in determining its usefulness in occupant protection at NASA

Newby, N.↗

NASA NTRS2014

How Well Does the Latest Anthropomorphic Test Device Mimic Human Impact Responses?

One of the goals of the NASA Occupant Protection Group is to understand the human tolerance to dynamic loading. This knowledge has to come through indirect approaches such as existing human response databases, anthropometric test devices (ATD), animal testing, post-‐mortem human subjects, and models. This study investigated the biofidelity of the National Highway Traffic Safety Administration's ATD named the THOR (test device for human occupant restraint). If THOR responds comparably to humans, then it could potentially be used as a human surrogate to help validate space vehicle requirements for occupant protection. The THOR responses to frontal and spinal impacts (ranging from 8 to 12 G with rise times of 40, 70, and 100 ms) were measured and compared to human volunteer responses (95 trials in frontal and 58 in spinal) previously collected by the U. S. Air Force on the same horizontal impact accelerator. The impact acceleration profiles tested are within the expected range of multi-‐purpose crew vehicle (MPCV) landing dynamics. A correlation score was calculated for each THOR to human comparison using CORA (CORrelation and Analysis) software. A two-‐parameter beta distribution model fit was obtained for each dependent variable using maximum likelihood estimation. For frontal impacts, the THOR head x-‐acceleration peak response correlated with the human response at 8 and 10-‐G 100 ms but not 10-‐G 70 ms. The phase lagged the human response. Head z-‐acceleration was not correlated. Chest x-‐acceleration was in phase, had a higher peak response, and was well correlated with lighter subjects (Cora = 0.8 for 46 kg vs. Cora = 0.4 for 126 kg). Head x-‐displacement had a leading phase. Several subjects responded with the same peak displacement but the mean of the group was lower. The shoulder x-‐displacement was in phase but had higher peaks than the human response. For spinal impacts, the THOR head x-‐acceleration was not well correlated. Head and chest z-‐acceleration was in phase but had a higher peak response. Chest z-‐acceleration was highly correlated with heavier subjects at lower G pulses (Cora = 0.86 for 125 kg at 8 G). The human response was variable in shoulder z-‐displacement but the THOR was in phase and was comparable to the mean peak response. Head x-‐ and z-‐displacement was in phase but had higher peaks. Seat pan forces were well correlated, were in phase, but had a larger peak response than most subjects. The THOR does not respond to frontal and spinal impacts exactly the same way that a human does. Some responses are well matched and others are not. Understanding the strengths and weaknesses of this ATD is an important first step in determining its usefulness in occupant protection at NASA

Newby, Nate↗

NASA NTRSDate not supplied

A Flight Replanning Tool for Terminal Area Urban Air Mobility Operations

In this presentation we describe and evaluate a flight replanning tool, called the trial planner, for terminal area air transport applications. The trial planner employs predefined airspace structures to generate rerouting options between vertiports. In a simplified definition, vertiports are facilities that provide services for managing the take-off and landing of autonomous or manned electric vertical take-off or landing (eVTOL) aircraft. The airspace structures involved in our test cases are arrival routes that consist of predefined entry points to which a transitional path is computed dynamically from the current position of the aircraft. Rerouting options include the transitional path and approach segment along the arrival route; these rerouting options are not vetted for potential conflicts with other operations until a human operator commits to a choice and forwards the flight plan modification for approval from an automated airspace management service. A selected rerouting option is executed by loading a flight plan file to the aircraft ground control station. We conducted a qualitative evaluation of the trial planner using ratings provided by flight crews and air transportation human factors experts with relevant experience from air traffic control. Evaluation criteria included trust in the route recommendations and adequate explanation for the route options. We detail the logic and implementation of the trial planner, as well as report the results of the evaluation of the implementation herein.

Trial planning↗

NASA NTRS2014

Evaluation of Human and Anthropomorphic Test Device Finite Element Models under Spaceflight Loading Conditions

In an effort to develop occupant protection standards for future multipurpose crew vehicles, the National Aeronautics and Space Administration (NASA) has looked to evaluate the test device for human occupant restraint with the modification kit (THOR‐K) anthropomorphic test device (ATD) in relevant impact test scenarios. With the allowance and support of the National Highway Traffic Safety Administration, NASA has performed a series of sled impact tests on the latest developed THOR‐K ATD. These tests were performed to match test conditions from human volunteer data previously collected by the U.S. Air Force. The objective of this study was to evaluate the THOR‐K finite element (FE) model and the Total HUman Model for Safety (THUMS) FE model with respect to the tests performed. These models were evaluated in spinal and frontal impacts against kinematic and kinetic data recorded in ATD and human testing. Methods: The FE simulations were developed based on recorded pretest ATD/human position and sled acceleration pulses measured during testing. Predicted responses by both human and ATD models were compared to test data recorded under the same impact conditions. The kinematic responses of the models were quantitatively evaluated using the ISO‐metric curve rating system. In addition, ATD injury criteria and human stress/strain data were calculated to evaluate the risk of injury predicted by the ATD and human model, respectively. Results: Preliminary results show well‐correlated response between both FE models and their physical counterparts. In addition, predicted ATD injury criteria and human model stress/strain values are shown to positively relate. Kinematic comparison between human and ATD models indicates promising biofidelic response, although a slightly stiffer response is observed within the ATD. Conclusion: As a compliment to ATD testing, numerical simulation provides efficient means to assess vehicle safety throughout the design process and further improve the design of physical ATDs. The assessment of the THOR‐K and THUMS FE models in a spaceflight testing condition is an essential first step to implementing these models in the computational evaluation of spacecraft occupant safety. Promising results suggest future use of these models in the aerospace field.

Putnam, Jacob P.↗

NASA NTRS2000

Explosive Fracturing of an F-16 Canopy for Through-Canopy Crew Egress

Through-canopy crew egress, such as in the Harrier (AV-8B) aircraft, expands escape envelopes by reducing seat ejection delays in waiting for canopy jettison. Adverse aircraft attitude and reduced forward flight speed can further increase the times for canopy jettison. However, the advent of heavy, high-strength polycarbonate canopies for bird-strike resistance has not only increased jettison times, but has made seat penetration impossible. The goal of the effort described in this paper was to demonstrate a method of explosively fracturing the F-16 polycarbonate canopy to allow through-canopy crew ejection. The objectives of this effort were to: 1. Mount the explosive materials on the exterior of the canopy within the mold line, 2. Minimize visual obstructions, 3. Minimize internal debris on explosive activation, 4. Operate within less than 10 ms, 5. Maintain the shape of the canopy after functioning to prevent major pieces from entering the cockpit, and 6. Minimize the resistance of the canopy to seat penetration. All goals and objectives were met in a full-scale test demonstration. In addition to expanding crew escape envelopes, this canopy fracture approach offers the potential for reducing system complexity, weight and cost, while increasing overall reliability, compared to current canopy jettison approaches. To comply with International Traffic in Arms Regulations (ITAR) and permit public disclosure, this document addresses only the principles of explosive fracturing of the F-16 canopy materials and the end result. ITAR regulations restrict information on improving the performance of weapon systems. Therefore, details on the explosive loads and final assembly of this canopy fracture approach, necessary to assure functional performance, are not included.

Bement, Laurence J.↗

NASA NTRS2013

Enhanced Contact Graph Routing (ECGR) MACHETE Simulation Model

Contact Graph Routing (CGR) for Delay/Disruption Tolerant Networking (DTN) space-based networks makes use of the predictable nature of node contacts to make real-time routing decisions given unpredictable traffic patterns. The contact graph will have been disseminated to all nodes before the start of route computation. CGR was designed for space-based networking environments where future contact plans are known or are independently computable (e.g., using known orbital dynamics). For each data item (known as a bundle in DTN), a node independently performs route selection by examining possible paths to the destination. Route computation could conceivably run thousands of times a second, so computational load is important. This work refers to the simulation software model of Enhanced Contact Graph Routing (ECGR) for DTN Bundle Protocol in JPL's MACHETE simulation tool. The simulation model was used for performance analysis of CGR and led to several performance enhancements. The simulation model was used to demonstrate the improvements of ECGR over CGR as well as other routing methods in space network scenarios. ECGR moved to using earliest arrival time because it is a global monotonically increasing metric that guarantees the safety properties needed for the solution's correctness since route re-computation occurs at each node to accommodate unpredicted changes (e.g., traffic pattern, link quality). Furthermore, using earliest arrival time enabled the use of the standard Dijkstra algorithm for path selection. The Dijkstra algorithm for path selection has a well-known inexpensive computational cost. These enhancements have been integrated into the open source CGR implementation. The ECGR model is also useful for route metric experimentation and comparisons with other DTN routing protocols particularly when combined with MACHETE's space networking models and Delay Tolerant Link State Routing (DTLSR) model.

Segui, John S.↗