Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trajectory Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Analysis of CCD images of the coma of comet P/Halley

The modeling analysis objective of this project is to make use of the skill acquired in the development of Monte Carlo particle trajectory models for the distributions of gas species in cometary comae as a basis for a new dust coma model. This model will include a self-consistent picture of the time-dependent dusty-gas dynamics of the inner coma and the three-dimensional time-dependent trajectories of the dust particles under the influence of solar gravity and solar radiation pressure in the outer coma. Our purpose is to use this model as a tool to analyze selected images from two sets of data of the comet P/Halley with the hope that we can help to understand the effects of a number of important processes on the spatial morphology of the observed dust coma. The study will proceed much in the same way as our study of the spatially extended hydrogen coma where we were able to understand the spatial morphology of the Lyman-alpha coma in terms of the partial thermalization of the hot H atoms produced by the photodissociation of cometary H2O and OH. The processes of importance to the observed dust coma include: (1) the dust particle size distribution function; (2) the terminal velocities of various sized dust particles in the inner coma; (3) the radiation scattering properties of dust particles, which are important both in terms of the observed scattered radiation and the radiation pressure acceleration on dust particles; (4) the fragmentation and/or vaporization of dust particles; (5) the relative importance of CHON and silicate dust particles as they contribute both to the dusty-gas dynamics in the inner coma (that produce the dust particle terminal velocities) and to the observed spatial morphology of the outer dust coma; and (6) the time and direction dependence of the source of dust.

Combi, Michael R.↗

Improved Propulsion Modeling for Low-Thrust Trajectory Optimization

Low-thrust trajectory design is tightly coupled with spacecraft systems design. In particular, the propulsion and power characteristics of a low-thrust spacecraft are major drivers in the design of the optimal trajectory. Accurate modeling of the power and propulsion behavior is essential for meaningful low-thrust trajectory optimization. In this work, we discuss new techniques to improve the accuracy of propulsion modeling in low-thrust trajectory optimization while maintaining the smooth derivatives that are necessary for a gradient-based optimizer. The resulting model is significantly more realistic than the industry standard and performs well inside an optimizer. A variety of deep-space trajectory examples are presented.

trajectory↗

Optimizing Simulated Trajectories Of Rigid Bodies

6D POST is general-purpose, six-degree-of-freedom computer program for optimization of simulated trajectories of rigid bodies. Direct extension of three-degree-of-freedom POST program. 6D POST program models trajectory of powered or unpowered vehicle operating at or near rotating planet. Used to solve variety of performance, guidance, and flight-control problems for atmospheric and orbital vehicles. Written in FORTRAN 77 and FORTRAN V.

Brauer, Garry L.↗

Future ATM Concepts Evaluation Tool (FACET) Interface Control Document

This Interface Control Document (ICD) documents the airspace adaptation and air traffic inputs of NASA's Future ATM Concepts and Evaluation Tool (FACET). Its intended audience is the project manager, project team, development team, and stakeholders interested in interfacing with the system. FACET equips Air Traffic Management (ATM) researchers and service providers with a way to explore, develop and evaluate advanced air transportation concepts before they are field-tested and eventually deployed. FACET is a flexible software tool that is capable of quickly generating and analyzing thousands of aircraft trajectories. It provides researchers with a simulation environment for preliminary testing of advanced ATM concepts. Using aircraft performance profiles, airspace models, weather data, and flight schedules, the tool models trajectories for the climb, cruise, and descent phases of flight for each type of aircraft. An advanced graphical interface displays traffic patterns in two and three dimensions, under various current and projected conditions for specific airspace regions or over the entire continental United States. The system is able to simulate a full day's dynamic national airspace system (NAS) operations, model system uncertainty, measure the impact of different decision-makers in the NAS, and provide analysis of the results in graphical form, including sector, airport, fix, and airway usage statistics. NASA researchers test and analyze the system-wide impact of new traffic flow management algorithms under anticipated air traffic growth projections on the nation's air traffic system. In addition to modeling the airspace system for NASA research, FACET has also successfully transitioned into a valuable tool for operational use. Federal Aviation Administration (FAA) traffic flow managers and commercial airline dispatchers have used FACET technology for real-time operations planning. FACET integrates live air traffic data from FAA radar systems and weather data from the National Weather Service to summarize NAS performance. This information allows system operators to reroute flights around congested airspace and severe weather to maintain safety and minimize delay. FACET also supports the planning and post-operational evaluation of reroute strategies at the national level to maximize system efficiency. For the commercial airline passenger, strategic planning with FACET can result in fewer flight delays and cancellations. The performance capabilities of FACET are largely due to its architecture, which strikes a balance between flexibility and fidelity. FACET is capable of modeling the airspace operations for the continental United States, processing thousands of aircraft on a single computer. FACET was written in Java and C, enabling the portability of its software to a variety of operating systems. In addition, FACET was designed with a modular software architecture to facilitate rapid prototyping of diverse ATM concepts. Several advanced ATM concepts have already been implemented in FACET, including aircraft self-separation, prediction of aircraft demand and sector congestion, system-wide impact assessment of traffic flow management constraints, and wind-optimal routing.

FACET↗

Examining Runner’s Outdoor Heat Exposure Using Urban Microclimate Modeling and GPS Trajectory Mining

It is important to quantify human heat exposure in order to evaluate and mitigate the negative impacts of heat on human well-being in the context of global warming. This study proposed a human-centric framework to examine human personal heat exposure based on anonymous GPS trajectories data mining and urban microclimate modeling. The mean radiant temperature (Tmrt) that represents the human body’s energy balance was used to indicate human heat exposure. The meteorological data and high-resolution 3D urban model generated from multispectral remotely sensed images and LiDAR data were used as inputs in urban microclimate modeling to map the spatio-temporal distribution of the Tmrt in the Boston metropolitan area. The anonymous human GPS trajectory data collected from fitness Apps was used to map the spatiotemporal distribution of human outdoor activities. By overlaying the anonymous GPS trajectories on the generated spatio-temporal maps of Tmrt, this study further examined the heat exposure of runners in different age-gender groups in the Boston area. Results show that there is no significant difference in terms of heat exposure for female and male runners. The female runners in the age of 45-54 are exposed to more heat than female runners of 18-24 and 25-34, while there is no significant difference among male runners. This study proposed a novel method to estimate human heat exposure, which would shed new light on mitigating the negative impacts of heat on human health.

Personal heat exposure↗

Utilization of UARS Data in Validation of Photochemical and Dynamical Mechanism in Stratospheric Models

We proposed model-data intercomparison studies for UARS data. In the past three months, we have been working on constructing analysis tools to diagnose the UARS data. The 'Trajectory mapping' technique, which was developed by Morris (1994), is adaptable to generate synoptic maps of trace gas data from asynoptic observations. An in-house trajectory model (kinematic methods following Merrill et al., 1986 and Pickering et al., 1994) has been developed in AER under contract with NASA/ACMAP and the trajectory mapping tool has been applied to analyze UARS measurement.

Rodriquez, Jose M.↗

Observations and numerical simulations of precipitation development is seeded clouds over the Sierra Nevada

The evolution of precipitation in seeded wintertime orographically induced convective and stratiform clouds with embedded convection were studied using in situ observations and particle growth and trajectory models. The particle growth model of Heymsfield embedded in a kinematic flow field representative of the Sierra barrier was used to study the ice particle growth by diffusion, accretion and subsequent fall trajectories. The particles observed by the aircraft were classified into habits. The growth of observed particles were compared with the model predicted evolution. Using the aggregation model of Heymsfield, the observation of formation of aggregates is less than 10 minutes was verified. The key findings of this study are presented.

Prasad, N.↗

Nighttime OClO in the Winter Arctic Vortex

We show that a nighttime profile of OClO in the Arctic vortex during the winter of 2000 is overestimated, by nearly a factor of 2, using an isentropic trajectory model constrained by observed profiles of ClOx (ClO + 2 X ClOOCl) and BrO. Calculated abundances of nighttime OClO are shown to be sensitive to the abundance of BrOx (BrO + BrCl), details of the air parcel history during the most recent sunrise/sunset transitions, and the BrCl yield from the reaction BrO + ClO. Many uncertainties are considered, and the discrepancy between measured and modeled nighttime OClO appears to be robust. This discrepancy suggests that production of OClO occurs more slowly than implied by standard photochemistry. If the yield of BrCl from the reaction of BrO + ClO is increased from 7% (JPL 2002 value) to 11% (near the upper limit of the uncertainty), good agreement is found between measured and modeled nighttime OClO. This study highlights the importance of accurate knowledge of BrO + ClO reaction kinetics as well as air parcel trajectories for proper interpretation of nighttime OClO. These factors have a considerably smaller impact on the interpretation of OClO observations obtained during twilight (90(deg) <=SZA <= 92(deg)), when photolytic processes are still active.

chlorine activation↗

Lessons Learned from Assimilating Altimeter Data into a Coupled General Circulation Model with the GMAO Augmented Ensemble Kalman Filter

Satellite altimetry measurements have provided global, evenly distributed observations of the ocean surface since 1993. However, the difficulties introduced by the presence of model biases and the requirement that data assimilation systems extrapolate the sea surface height (SSH) information to the subsurface in order to estimate the temperature, salinity and currents make it difficult to optimally exploit these measurements. This talk investigates the potential of the altimetry data assimilation once the biases are accounted for with an ad hoc bias estimation scheme. Either steady-state or state-dependent multivariate background-error covariances from an ensemble of model integrations are used to address the problem of extrapolating the information to the sub-surface. The GMAO ocean data assimilation system applied to an ensemble of coupled model instances using the GEOS-5 AGCM coupled to MOM4 is used in the investigation. To model the background error covariances, the system relies on a hybrid ensemble approach in which a small number of dynamically evolved model trajectories is augmented on the one hand with past instances of the state vector along each trajectory and, on the other, with a steady state ensemble of error estimates from a time series of short-term model forecasts. A state-dependent adaptive error-covariance localization and inflation algorithm controls how the SSH information is extrapolated to the sub-surface. A two-step predictor corrector approach is used to assimilate future information. Independent (not-assimilated) temperature and salinity observations from Argo floats are used to validate the assimilation. A two-step projection method in which the system first calculates a SSH increment and then projects this increment vertically onto the temperature, salt and current fields is found to be most effective in reconstructing the sub-surface information. The performance of the system in reconstructing the sub-surface fields is particularly impressive for temperature, but not as satisfactory for salt.

Keppenne, Christian↗

Interplanetary Trajectory Design for NASA's Common Probe Study

The Galileo Probe, Pioneer-Venus probes, and SPRITE concept all share a number of common characteristics. They all follow a similar entry and descent sequence, using an aeroshell to protect against entry environments, and parachutes to aid in extrusion and descent speed control of the descent vehicle containing the science instruments. The descent vehicles all contained similar instruments (e.g. mass spectrometers and atmosphere structure sensors), and data was either relayed back to a carrier spacecraft (Galileo Probe, SPRITE) or transmitted direct to Earth (Pioneer-Venus). Based on these similar characteristics, NASA initiated a study to investigate a “common probe' that might be designed to perform similar science in a variety of planetary environments. This concept would leverage a common aeroshell design, and descent vehicle designs that could be made as similar as possible (the primary exception being that Venus will require a pressure vessel due to the extreme pressures and temperatures seen in the lower portion of the descent). To support the Common Probe study, GSFC and JPL performed a series of interplanetary trajectory analyses to help develop the mission designs for Venus, Jupiter, Saturn, Uranus, and Neptune. Primary considerations in the trajectory modeling included: a maximum of 12-year time of flight (for outer planet destinations), generation of both steep and shallow entry trajectories to each destination (where steep and shallow resulted in approximately 150 g and 50 g peak deceleration during entry at each location), and consideration of the data relay. Gravity assists and trajectories with low delta-V requirements (typically much less than 500 m/s) were also incorporated into the design process to enable launch on existing vehicles such as the Atlas V.

Hughes, Kyle M.↗

Concept of Operations for Management by Trajectory

This document describes Management by Trajectory (MBT), a concept for future air traffic management (ATM) in which every flight operates in accordance with a four-dimensional trajectory (4DT) that is negotiated between the airspace user and the Federal Aviation Administration (FAA) to respect the airspace user's goals while complying with National Airspace System (NAS) constraints. In the present-day NAS, the ATM system attempts to predict the trajectory for each flight based on the approved flight plan and scheduled or controlled departure time. However, once the aircraft starts to move, controllers tactically manage the aircraft to implement traffic management restrictions, separate otherwise conflicting aircraft, and address arising NAS constraints. Tactical controller actions are not directly communicated to the automation systems or other stakeholders. Furthermore, the initial trajectory prediction does not anticipate these disruptions or how they will impact the flight. Consequently, and compounded by gaps in required data and models, trajectory predictions are less accurate than possible, which affects Traffic Flow Management (TFM) performance. A cornerstone of the MBT concept is that all air vehicles have, at all times, an assigned 4DT from their current state to their destination. These assigned trajectories consist of trajectory constraints and descriptions. Pilots and air traffic controllers, with the aid of automation, operate the aircraft to comply with the assigned trajectory, unless first negotiating a revision. Equipped aircraft have substantial responsibility for complying with the assigned trajectory without controller intervention. To maximize the operational flexibility available to the airspace user, the assigned trajectory only imposes trajectory constraints as required to achieve the ATM goals of NAS constraint compliance and aircraft separation. Trajectory descriptions are added to the assigned trajectory to ensure sufficient predictability. To further improve trajectory prediction accuracy, airspace users supplement the assigned trajectory by broadcasting intent information and updating it as necessary. Air vehicle intent is a more detailed description of the airspace user's plan for how the flight will fly the assigned trajectory. Air vehicle intent can change freely, without negotiation, as long as it remains in compliance with the assigned trajectory. Aircraft assigned trajectories, air vehicle intent, and predicted trajectories are shared, creating a common view among stakeholders. A NAS Constraint Service gathers and publishes information about all known NAS constraints, enabling airspace users to be informed participants in trajectory negotiation. Trajectory constraints in the assigned trajectory are mapped to NAS constraints to facilitate identifying which aircraft are affected when NAS constraints change. To support efficient trajectory negotiation, all aircraft provide current information about air vehicle capabilities. Assigned trajectories are constructed to satisfy all known NAS constraints, improving trajectory stability and predictability. Uncertainty and disruptions are handled by modifying the assigned trajectory as far in advance as possible. By proactively negotiating changes to the assigned trajectory, rather than relying on controller-selected tactical actions such as vectors to resolve traffic conflicts or implement miles-in-trail restrictions, MBT keeps aircraft on closed trajectories that are fully known to all stakeholders. Since reactive air traffic control actions cannot be predicted in advance, the downstream trajectory cannot be accurately predicted until they happen. Reliable trajectory predictions allow the system to identify needed modifications to trajectories further in advance, where they can be negotiated and communicated as amendments (i.e., additional or altered trajectory constraints) to the assigned trajectory. Decision Support Tools (DSTs) aid controllers in rapidly defining and communicating closed trajectories to the aircraft and support all stakeholders in trajectory negotiation. Anticipated MBT benefit mechanisms include more accurate trajectory predictions, improved ATM performance and robustness to off-nominal conditions, increased flexibility and operational efficiency, reduced impediments to emerging classes of airspace users accessing NAS resources, reduced environmental impacts, and enhanced safety.

ConOps↗

Cometary atmospheres: Modeling the spatial distribution of observed neutral radicals

The dependencies on heliocentric velocity for the solar photodissociation lifetime and the solar fluorescence rate of the OH radical were incorporated into the Monte Carlo particle trajectory model for cometary radicals. For the case of CN a study was initiated on the effects of using several different adopted models on the calculation of production rates from filter photometry. Progress in these areas is discussed. A comparison of two different sets of scale length data for cometary C2 and CN is also presented.

Combi, M. R.↗

Lunar far side sample return missions using the Soviet Luna system

The paper assesses the feasibility of using the Soviet Lunar Sample Return vehicle in cooperation with the United States to return a sample of lunar soil from the far side of the moon. Analysis of the orbital mechanics of the Luna system shows how landing sites are restricted on the moon. The trajectory model is used to duplicate the 3 Luna missions flown to date and the results compared to actual Soviet data. The existence of suitable trajectories for the earth return trip is assessed, including landing dispersions at earth. Several possible areas of technical difficulty are identified.

Roberts, P. H., Jr.↗

Program to Optimize Simulated Trajectories (POST). Volume 1: Formulation manual

A general purpose FORTRAN program for simulating and optimizing point mass trajectories (POST) of aerospace vehicles is described. The equations and the numerical techniques used in the program are documented. Topics discussed include: coordinate systems, planet model, trajectory simulation, auxiliary calculations, and targeting and optimization.

Brauer, G. L.↗

Electric Sail Design Sensitivities

Electric Sails (E-Sails) are a promising propulsion technology that seek to enable high characteristic propellentless acceleration for spacecraft to reach distant and/or difficult to reach orbits such as rapid transit to heliopause. The E-Sail system exchanges momentum by using positively charged electrostatic tethers to repel solar wind photons to push it through space. This concept was first theorized by Pekka Janhunen in 2004 with further developments occurring including a NASA Innovative Advanced Concepts Phase 1 and Phase 2 hosted out of NASA’s Marshall Space Flight Center (MSFC). These developments led to further maturation of the overall system, and this paper is designed to help identify different design sensitivities of an integrated Electric Sail system. To approach this, a small team at MSFC took an in-house developed three degrees of freedom (3DoF) simulation tool and a trajectory modelling tool to look at different design parameters and to determine a potential ideal E-Sail configuration. An E-Sail system has different design architectures including a barbell design, hub and spoke design, and a potential hybrid solution. The barbell design features two equally massed satellites that spin around a central point in the tether system. The hub and spoke design features a large central spacecraft with small end spacecraft to aid in formation control of the overall E-Sail system. Leveraging elements from both the hub and spoke, and barbell design, a hybrid option exists where one could have a larger central mass and one or two tethers extended to a smaller end mass [2]. In summary, the hub and spoke design is the ideal configuration for E-Sail with tethers spanning kilometers to achieve the designed design characteristic acceleration of at least one mm/s2 with this architecture being the focus of this study. Different key design parameters were varied as part of this study. These parameters include the total number of tethers, the length of the tethers, spin rate, relative spacecraft mass, tether voltage, inertia per tether, and impact of slew rate changes. These results started from an internal MSFC technology demonstration mission design and then the parameters were varied with engineering judgement to ensure that the results were consistent with expected results. These were varied in the MSFC 3DoF tool and compared to baseline results to generate a candidate ideal E-Sail design system. These results were then used to help inform the mission analysis design for the system. The 3DoF trajectory optimization was performed in the Astrodynamics and Space Science Enabling Toolbox (ASSET) and utilized collocation optimization of control vector pointing with the objective function being transfer duration. A representative model of the E-Sail force was derived as a function of the Sun-pointing vector direction. This model was initialized with a zero Sun Incidence Angle (SIA) trajectory for the initial guess generation, then with a portion of the mission optimized SIA time history for fast outbound transfers. After the trajectory is hyperbolic relative to a heliocentric frame, the SIA is maintained at 0 degrees except for any needed trajectory correction maneuvers. This trajectory optimization looked at different characteristic acceleration values to analyze the impact it had on mission performance. As a result of this study, the team can best inform mission designers and technology development efforts to mature the E-Sail system. This study will allow mission designers to have defined rules-of-thumb to design an E-Sail system to meet desired mission needs as well as providing several sample mission profiles. These design drivers will inform maturation efforts on which design requirements to consider for an integrated E-Sail design.

E-Sail↗

Progress Towards Integrating the Finite-Volume Cubed-Sphere (FV3) Dynamical Core Tangent Linear and Adjoint Models into JEDI

The Joint Effort for Data assimilation Integration (JEDI) -- led by the Joint Center for Satellite Data Assimilation (JCSDA) -- is an inter-organizational endeavor to develop a common framework for performing data assimilation. This extensive framework will ultimately provide solvers, observation operators, interpolation and model interfaces using object oriented modeling. Two partners involved in JEDI use or plan to use the Finite Volume Cubed-Sphere (FV3) dynamical core to produce weather forecasts; these are NASA's Global Modeling and Assimilation Office and NOAA's National Center for Environment Prediction. In this work we present an update on ongoing efforts to integrate the FV3 tangent linear and adjoint models into the prototype JEDI framework. We setup and run a simple cycled data assimilation experiment using 4DVAR on the cubed sphere grid and with the FV3 tangent linear and adjoint models. Development of the observation operators for JEDI is separately underway. Instead of using real observations a simplified set of simulated observations will be used. We discuss the steps required to bring the FV3 linearized model into the object oriented framework and consider what would be the computational requirements of running this configuration for an operational system. FV3 uses a small time-step to ensure that small scales are well resolved, however this presents design challenges when running 4DVAR with the adjoint. An approach to storing the FV3 model trajectory has been developed that maintains the flexibility of using automatic differentiation. We discuss how this approach is incorporated into the framework. Other important uses of adjoint models include computing observation impacts and singular vectors, we consider how these tools can be included in JEDI.

Holdaway, Daniel↗

Applications of the AVE-Sesame data sets to mesoscale studies

Data collected by the lightning data concentrator are available for research. The Mark 3 McIDAS capability provides greater flexibility for the Marshall user community and serves as a model of future UW McIDAS to remote computer links. Techniques were investigated for the display of dynamic 3-D data sets. To date the most promising display technology is a polarized two CRT perspective display which allows both dynamic 3-D images and graphics presentations with full color capability. Algorithms were for the preparation and display of conventional and satellite based weather data in 3-D. These include gridding, contouring, and streamlining processors which operate on both real time and case study data bases. An upper air trajectory model was implemented which creates a display of air parcel trajectories in perspective 3-D. A subsystem for the generation of 3-D solid surface display with shading and hidden surface display with shading and hidden surface removal was tested and its products are currently being evaluated. Motion parallax introduced by moving the point of observation during display is an important depth cue, which, when added to the perspective parallax creates a very realistic appearing display.

Suomi, V. E.↗

Analysis and Prediction of Ice Shedding for a Full-Scale Heated Tail Rotor

When helicopters are to fly in icing conditions, it is necessary to consider the possibility of ice shed from the rotor blades. In 2013, a series of tests were conducted on a heated tail rotor at NASA Glenn's Icing Research Tunnel (IRT). The tests produced several shed events that were captured on camera. Three of these shed events were captured at a sufficiently high frame rate to obtain multiple images of the shed ice in flight that had a sufficiently long section of shed ice for analysis. Analysis of these shed events is presented and compared to an analytical Shedding Trajectory Model (STM). The STM is developed and assumes that the ice breaks off instantly as it reaches the end of the blade, while frictional and viscous forces are used as parameters to fit the STM. The trajectory of each shed is compared to that predicted by the STM, where the STM provides information of the shed group of ice as a whole. The limitations of the model's underlying assumptions are discussed in comparison to experimental shed events.

rotorcraft↗