Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trajectory Reconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

ASPIRE Flight Mechanics Modeling and Post Flight Analysis

The Advanced Supersonic Parachute Inflation Research and Experiment (ASPIRE) is a series of sounding rocket flights aimed at understanding the dynamics of supersonic parachutes that are used for Mars robotic applications. SR01 was the first sounding rocket flight of ASPIRE that occurred off the coast of Wallops Island, VA on Oct. 4, 2017 and showed the successful deployment and inflation of a Mars Science Laboratory built-to- print parachute in flight conditions similar to the 2012 Mars Science Laboratory (MSL) mission. SR02 was the second sounding rocket flight that also occurred off the coast of Wallops Island on March 31, 2018 and showcased the successful deployment and inflation of a new strengthened parachute being considered for the Mars 2020 mission at fifty percent higher dynamic pressure than observed on MSL. Prior to both flights, a multi-body flight dynamics simulation was developed to predict the parachute dynamics and was used, in conjunction with other tools, to target Mars-relevant flight conditions. After each flight, the reconstructed trajectory was used to validate the pre-flight dynamics simulation and recommend changes to improve predictions for future flights planned for the ASPIRE pro- gram. This paper describes the flight mechanics simulation and the post flight reconciliation process used to validate the flight models.

Dutta, Soumyo↗
NASA NTRS2020

ASPIRE Parachute Modeling and Comparison to Post-Flight Reconstruction

The Advanced Supersonic Parachute Inflation Research and Experiment (ASPIRE) was a series of sounding rocket flights aimed at understanding the dynamics of supersonic parachutes that are used for Mars robotic applications. Three flights for ASPIRE occurred off the coast of Wallops Island, VA in Oct. 2017, Mar. 2018, and Sept. 2018 and successfully demonstrated deployment and inflation of the Mars Science Laboratory and Mars 2020 mission parachute. Prior to all three flights, a multi-body flight dynamics simulation was developed to predict the parachute dynamics and was used, in conjunction with other tools, to target Mars-relevant flight conditions. After each flight, the reconstructed trajectory was used to validate the preflight dynamics simulation and recommend changes to improve predictions for future flights in the ASPIRE program. This paper describes the parachute models and flight mechanics simulation used to target conditions for the three flights and the post-flight comparison of the tools.

Soumyo Dutta↗
NASA NTRS2003

Navigating CONTOUR using the noncoherent transceiver technique

The successful navigation of the Comet Nucleus Tour spacecraft was performed at JPL and was conducted with the use of the new noncoherent transceiver technique developed by the Applied Physics Laboratory. Discussions include the conditioning performed on the 2-way noncoherent Doppler data, the orbit determination process, and the post SRM trajectory reconstruction.

CONTOUR↗
NASA NTRS2017

JUNO navigation for Jupiter orbit insertion

Juno arrived at Jupiter on 05 July 2016 UTC, achieving orbit with the execution of the Jupiter Orbit Insertion (JOI) maneuver. Thanks to a dynamically wellbehaved spacecraft, the delivery of Juno to JOI was done largely with only a maneuver to setup and Earth gravity assist (EGA), an EGA, an EGA clean-up maneuver, and a JOI targeting maneuver. During the last several weeks of the approach to JOI, the dominant uncertainties in the predicted trajectory were from the Jupiter barycenter ephemeris. In this paper, we discuss the maneuver and orbit determination (OD) strategy for successfully arriving at JOI, the the challenges of calculating a correction to the Jupiter barycenter ephemeris using only radiometric data types, and how the ephemeris estimates during approach to JOI compare to a post-JOI trajectory reconstruction.

Takahashi, Yu↗
NASA NTRS2024

Use of Forecast Atmosphere for Earth Entry, Descent, and Landing Modeling

Flight mechanics simulations are used to characterize the performance of Earth entry, descent, and landing vehicles. Atmospheric prediction models are often a key component of these simulations. Global atmospheric models are used for both engineering design due to their ability to define atmospheric properties over a large swath of locations and times as well as used for the availability of atmospheric uncertainties in the models that can be used in statistical performance analysis. However for day-of-flight operations, the use of forecast atmospheres based on more current measurements are beneficial to the accuracy of the performance prediction, including landing locations. Reanalysis of these forecasts can also be used for post-flight analysis, including trajectory reconstruction. This paper describes how forecast atmospheres can be beneficial for Earth entry, descent, and landing analysis and ways these models can be implemented in simulations.

Soumyo Dutta↗
NASA NTRSDate not supplied

Demonstration of Navigation Doppler Lidar Capabilities Onboard the First Commercial Lunar Lander

Landing on the Moon safely, softly, and precisely is still an extremely difficult task to achieve. Navigation Doppler Lidar (NDL) was designed to provide a solution to spaceflight landing vehicles in achieving this task. NDL is a high-performance, compact, and cost-effective velocity and altitude measurement instrument that has been developed, tested and improved over many years. Testing has now culminated with NDL’s successful operation on two spaceflight vehicles this year: Astrobotic’s Peregrine lunar lander and Intuitive Machines’ Odysseus lunar lander. Odysseus became the first U.S. vehicle to land successfully on the Moon since Apollo 17. The performance data obtained by NDL during the Intuitive Machines mission is exceptional, and this mission fully demonstrated NDL’s ability to produce critical velocity and altitude data for future robotic and human exploration missions to the Moon and other planetary bodies. This paper will give an overview of NDL briefly describing its history, architecture, and theory of operation. NDL’s system checkout on Astrobotic’s Peregrine lunar lander is then discussed followed by NDL’s performance during the Intuitive Machines Odysseus lunar lander mission. A description of how the data acquired by NDL is then used to perform trajectory reconstruction and animation is then provided. Finally, this paper concludes with potential uses of NDL’s acquired mission data to future applications.

Lunar Landing↗
NASA NTRSDate not supplied

Demonstration of Navigation Doppler Lidar Capabilities Onboard the First Commercial Lunar Lander

Landing on the Moon safely, softly, and precisely is still an extremely difficult task to achieve. Navigation Doppler Lidar (NDL) was designed to provide a solution to spaceflight landing vehicles in achieving this task. NDL is a high-performance, compact, and cost-effective velocity and altitude measurement instrument that has been developed, tested and improved over many years. Testing has now culminated with NDL’s successful operation on two spaceflight vehicles this year: Astrobotic’s Peregrine lunar lander and Intuitive Machines’ Odysseus lunar lander. Odysseus became the first U.S. vehicle to land successfully on the Moon since Apollo 17. The performance data obtained by NDL during the Intuitive Machines mission is exceptional, and this mission fully demonstrated NDL’s ability to produce critical velocity and altitude data for future robotic and human exploration missions to the Moon and other planetary bodies. This paper will give an overview of NDL briefly describing its history, architecture, and theory of operation. NDL’s system checkout on Astrobotic’s Peregrine lunar lander is then discussed followed by NDL’s performance during the Intuitive Machines Odysseus lunar lander mission. A description of how the data acquired by NDL is then used to perform trajectory reconstruction and animation is then provided. Finally, this paper concludes with potential uses of NDL’s acquired mission data to future applications.

Lunar Landing↗
NASA NTRSDate not supplied

The CLVTOPS Toolchain for NASA Space Launch System Liftoff Analysis and Post Flight Validation

This paper showcases the unique technical capabilities of the CLVTOPS multi-body flight dynamics toolchain developed by Marshall Space Flight Center (MSFC) for analyzing NASA’s Space Launch System (SLS) liftoff events. The CLVTOPS toolchain integrates high-fidelity simulations, geometric algorithms, advanced data analytics, and post-flight telemetry to demonstrate positive clearance between separating bodies and inform design decisions that enhance mission reliability. Proper liftoff separation is crucial to the success of the launch vehicle’s mission; vehicle impacts with the launch tower and supporting components incur a heightened risk of mission failure. For liftoff analysis, the CLVTOPS toolchain enables the integration of vehicle, launch pad, and environmental input models for the investigation of key clearance effectors. Furthermore, recent enhancements to the CLVTOPS toolchain allow for validation via photogrammetric trajectory reconstruction and plume pressure impingement estimation on the tower. The following sections will walk through the tool-chain, SLS liftoff ground rules and assumptions, key models, standard analysis, recent enhancements, and post-flight validation of the Artemis I mission liftoff event.

CLVTOPS↗
NASA NTRSDate not supplied

Space Launch System: CLVTOPS Toolchain for SLS Liftoff Separation Analysis

This presentation showcases the unique technical capabilities of the CLVTOPS multi-body flight dynamics tool chain developed by Marshall Space Flight Center (MSFC) for analyzing NASA’s Space Launch System (SLS) liftoff events. The CLVTOPS tool chain integrates high-fidelity simulations, geometric algorithms, advanced data analytics, and post-flight telemetry to demonstrate positive clearance between separating bodies and inform design decisions that enhance mission reliability. Proper liftoff separation is crucial to the success of the launch vehicle’s mission; vehicle impacts with the launch tower and supporting components incur a heightened risk of mission failure. For liftoff analysis, the CLVTOPS tool chain enables the integration of vehicle, launch pad, and environmental input models for the investigation of key clearance effectors. Furthermore, a novel capability of the CLVTOPS tool chain allows for verification and validation of trajectory reconstruction via photogrammetric imagery analysis. The following sections will walk through the tool chain, SLS liftoff ground rules and assumptions, model integration, pre-flight verification, and post-flight validation of the Artemis I mission liftoff event.

CLVTOPS↗
NASA NTRSDate not supplied

Mars InSight Entry, Descent, and Landing Trajectory and Atmosphere Reconstruction

The InSight mission landed on the surface of Mars on November 26th, 2018. The InSight system performance met all design requirements, although several performance metrics fell near the boundaries of the predictions. The peak deceleration was high, the overall timeline was short, and the landing site was uprange and crossrange from the target. This paper describes the reconstruction of the entry, descent, and landing trajectory and atmosphere. The approach utilizes a Kalman filter to blend sensor data to obtain the vehicle trajectory. The aerodynamic database is used in combination with the sensed accelerations to obtain estimates of the atmosphere-relative state, which in turn is used to derive the free-stream atmospheric conditions during entry, until the time of parachute deployment. The results indicate that the reconstructed atmosphere was approximately 1σbelow the preflight atmosphere. Analysis of the reconstructed vehicle attitude angles indicate that the aerodynamic lift was oriented downward at entry. The vehicle developed a roll rate during entry, which directed a component of the lift to the north. The low density and aerodynamic lift direction are determined to be the primary causes of the high deceleration, short timeline, and location of the landing site relative to the target.

Christopher D Karlgaard↗
NASA NTRS2020

Mars InSight Entry, Descent, and Landing Trajectory and Atmosphere Reconstruction

The InSight mission landed on the surface of Mars on November 26th, 2018. The InSight system performance met all design requirements, although several performance metrics fell near the boundaries of the predictions. The peak deceleration was high, the overall timeline was short, and the landing site was uprange and crossrange from the target. This paper describes the reconstruction of the entry, descent, and landing trajectory and atmosphere. The approach utilizes a Kalman filter to blend sensor data to obtain the vehicle trajectory. The aerodynamic database is used in combination with the sensed accelerations to obtain estimates of the atmosphere-relative state, which in turn is used to derive the free-stream atmospheric conditions during entry, until the time of parachute deployment. The results indicate that the reconstructed atmosphere was approximately 1σbelow the preflight atmosphere. Analysis of the reconstructed vehicle attitude angles indicate that the aerodynamic lift was oriented downward at entry. The vehicle developed a roll rate during entry, which directed a component of the lift to the north. The low density and aerodynamic lift direction are determined to be the primary causes of the high deceleration, short timeline, and location of the landing site relative to the target.

Christopher D Karlgaard↗
NASA NTRS2020

Advanced Supersonic Parachute Inflation Research Experiment Preflight Trajectory Modeling and Postflight Reconstruction

The Advanced Supersonic Parachute Inflation Research and Experiments (ASPIRE) was a series of sounding rocket flights aimed at understanding the dynamics of supersonic parachutes that are used for Mars robotic applications. The 2012 Mars Science Laboratory (MSL) had a successful deployment of a supersonic parachute, but based on post-flight analysis of parachute margins, the ASPIRE project was created as a risk-reduction program to improve quantification of these margins and qualify a supersonic parachute for Mars 2020, the follow-on mission to MSL. The first sounding rocket (SR01) flight of ASPIRE occurred near Wallops Island, Virginia on Oct. 4, 2017 and demonstrated the successful deployment and inflation of a MSL build-to-print parachute in flight conditions similar to the 2012 MSL mission. The ASPIRE SR02 and SR03 were successful follow-on flights on Mar. 31, 2018 and Sep. 7, 2018 that demonstrated the new, strengthened supersonic parachute designed for the Mars 2020 project. The SR02 and SR03 parachuteswere targeted to 100% and 140% of the expected flight limit load for Mars 2020 to confirm new margins expected from the strengthened parachute. Prior to all flights, a multi-body flight dynamics simulation was developed to predict the parachute dynamics and was used, in conjunction with other tools, to target Mars-relevant flight conditions. After each flight, the on-board data were used to reconstruct the flight trajectory and to validate the pre-flight dynamics simulation. Post-flight analysis showed that all three tests achieved their targeted conditions and pre-flight modeling bounded the key performance metrics for the parachute. This paper describes the flight mechanics simulation, post-flight reconstruction, and the reconciliation process used to validate the flight models.

Soumyo Dutta↗
NASA NTRS2016

Supersonic Flight Dynamics Test 2: Trajectory, Atmosphere, and Aerodynamics Reconstruction

The Supersonic Flight Dynamics Test is a full-scale flight test of aerodynamic decelerator technologies developed by the Low Density Supersonic Decelerator technology demonstration project. The purpose of the project is to develop and mature aerodynamic decelerator technologies for landing large-mass payloads on the surface of Mars. The technologies include a Supersonic Inflatable Aerodynamic Decelerator and supersonic parachutes. The first Supersonic Flight Dynamics Test occurred on June 28th, 2014 at the Pacific Missile Range Facility. The purpose of this test was to validate the test architecture for future tests. The flight was a success and, in addition, was able to acquire data on the aerodynamic performance of the supersonic inflatable decelerator. The Supersonic Disksail parachute developed a tear during deployment. The second flight test occurred on June 8th, 2015, and incorporated a Supersonic Ringsail parachute which was redesigned based on data from the first flight. Again, the inflatable decelerator functioned as predicted but the parachute was damaged during deployment. This paper describes the instrumentation, analysis techniques, and acquired flight test data utilized to reconstruct the vehicle trajectory, main motor thrust, atmosphere, and aerodynamics.

Karlgaard, Christopher D.↗
NASA NTRS2013

Dawn Orbit Determination Team : Trajectory Modeling and Reconstruction Processes at Vesta

The NASA Dawn spacecraft was launched on September 27, 2007 on a mission to study the asteroid belt's two largest objects, Vesta and Ceres. It is the first deep space orbiting mission to demonstrate solar-electric ion propulsion, providing the necessary delta-V to enable capture and escape from two extraterrestrial bodies. At this time, Dawn has completed its science campaign at Vesta and is currently on its journey to Ceres, where it will arrive in mid-2015. The spacecraft spent over a year in orbit around Vesta from July 2011 through August 2012, capturing science data during four dedicated orbit phases. In order to maintain the reference orbits necessary for science and enable the transfers between those orbits, precise and timely orbit determination was required. The constraints associated with low-thrust ion propulsion coupled with the relatively unknown a priori gravity and rotation models for Vesta presented unique challenges for the Dawn orbit determination team. While [1] discusses the prediction performance of the orbit determination products, this paper discusses the dynamics models, filter configuration, and data processing implemented to deliver a rapid orbit determination capability to the Dawn project.

Vesta↗
NASA NTRS2011

Ares I-X Test Flight Reference Trajectory Development

Ares I-X was the first test flight of NASA's Constellation Program's Ares I crew launch vehicle. Ares I is a two stage to orbit launch vehicle that provides crew access to low Earth orbit for NASA's future manned exploration missions. The Ares I first stage consists of a Shuttle solid rocket motor (SRM) modified to include an additional propellant segment and a liquid propellant upper stage with an Apollo J2X engine modified to increase its thrust capability. The modified propulsion systems were not available for the first test flight, thus the test had to be conducted with an existing Shuttle 4 segment reusable solid rocket motor (RSRM) and an inert Upper Stage. The test flight's primary objective was to demonstrate controllability of an Ares I vehicle during first stage boost and the ability to perform a successful separation. In order to demonstrate controllability, the Ares I-X ascent control algorithms had to maintain stable flight throughout a flight environment equivalent to Ares I. The goal of the test flight reference trajectory development was to design a boost trajectory using the existing RSRM that results in a flight environment equivalent to Ares I. A trajectory similarity metric was defined as the integrated difference between the Ares I and Ares I-X Mach versus dynamic pressure relationships. Optimization analyses were performed that minimized the metric by adjusting the inert upper stage weight and the ascent steering profile. The sensitivity of the optimal upper stage weight and steering profile to launch month was also investigated. A response surface approach was used to verify the optimization results. The analyses successfully defined monthly ascent trajectories that matched the Ares I reference trajectory dynamic pressure versus Mach number relationship to within 10% through Mach 3.5. The upper stage weight required to achieve the match was found to be feasible and varied less than 5% throughout the year. The paper will discuss the flight test requirements, provide Ares I-X vehicle background, discuss the optimization analyses used to meet the requirements, present analysis results, and compare the reference trajectory to the reconstructed flight trajectory.

Starr, Brett R.↗
NASA NTRS2013

Dawn Orbit Determination Team: Trajectory Modeling and Reconstruction Processes at Vesta

The Dawn spacecraft spent over a year in orbit around Vesta from July 2011 through August 2012. In order to maintain the designated science reference orbits and enable the transfers between those orbits, precise and timely orbit determination was required. Challenges included low-thrust ion propulsion modeling, estimation of relatively unknown Vesta gravity and rotation models, track-ing data limitations, incorporation of real-time telemetry into dynamics model updates, and rapid maneuver design cycles during transfers. This paper discusses the dynamics models, filter configuration, and data processing implemented to deliver a rapid orbit determination capability to the Dawn project.

low thrust↗
NASA NTRS2019

Reconstruction of the Adaptable Deployable Entry and Placement Technology Sounding Rocket One Flight Test

The Adaptable Deployable Entry and Placement Technology Sounding Rocket One flight test is a demonstration experiment for deployable atmospheric decelerator technologies. The suborbital flight test occurred on 12 September 2018, at the White Sands Missile Range. Data from on-board and ground-based sensors were collected, from which the as-flown trajectory was reconstructed using an iterative extended Kalman filter-smoother. This paper describes the methodology, test vehicle instrumentation, and data analysis results from the flight test trajectory reconstruction.

Tynis, Jake A.↗