Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transportation consideration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Soil transport by winds on Mars

Results of low-pressure wind tunnel testing and theoretical considerations are used to estimate the eolian transport of surface material on Mars. Saltation on Mars, equations of particle motion, computational results, and analytical determination of surface material movement are considered. A semiempirical formula is developed for estimating the total amount of surface material moving in eolian saltation, surface traction, and suspension. Numerical solutions of the equations of motion for particle trajectories on the surface of Mars are presented. The ratio of final particle speed to the particle threshold friction speed is found to be several times that of saltation on earth

White, B. R.↗
NASA NTRS1984

Thermal management considerations for 100 kW(e) In-Core Thermionic Space Nuclear Power System

The general thermal management approach for the SP-100 In-Core Thermionic Space Nuclear Power System is presented. Thermal advantages and design features of the heat transport subsystem are addressed, including the selection of parameters, heat transport fluid, and materials. Pumping considerations, thermal insulation requirements, and radiator design are discussed, and the impacts of system scaling to higher power levels are projected.

Van Hagan, T. H.↗
NASA NTRS2009

Lunar Module ECS (Environmental Control System) - Design Considerations and Failure Modes

Design considerations and failure modes for the Lunar Module (LM) Environmental Control System (ECS) are described. An overview of the the oxygen supply and cabin pressurization, atmosphere revitalization, water management and heat transport systems are provided. Design considerations including reliability, flight instrumentation, modularization and the change to the use of batteries instead of fuel cells are discussed. A summary is provided for the LM ECS general testing regime.

Interbartolo, Michael↗
NASA NTRS1993

A new approach to the study of the turbulence layer

Turbulent thermal convection is of considerable importance in fluid dynamical transport phenomena occurring, for example, in the planetary boundary layer of the Earth, the interiors of stars, and accretion disks. In particular, during a significant portion of the evolutionary phase of many stars having convectively unstable cores or outer envelopes, a substantial fraction of energy is transported from the central layers to the outer layers by thermal convection. Moreover, as much of the interior of a star is in highly turbulent motion, a complete theory of stellar structure and evolution requires the explicit consideration of turbulence in order to have expressions for the turbulent quantities arising in the stellar structure equations, and particularly, the turbulent fluxes that appear in the total flux conservation equation, such as the convective flux, kinetic energy flux, etc. A reliable quantification of these fluxes continues to present a challenge in astrophysical fluid dynamics, primarily because astrophysical turbulence is almost always fully-developed and nearly inviscid, and therefore governed by strong nonlinear interactions that distribute the energy among a very wide spectrum of eddies with scales ranging from the characteristic dimension of the flow to those sufficiently small to be affected by viscous dissipation. Furthermore, astrophysical flows are invariably compressible, anisotropic, and inhomogeneous, which requires the consideration of the dynamics of longitudinal modes and their interaction with the transverse modes, as well as complicated boundary conditions. In order to reach a compromise between analytical and numerical tractability and the basic physics of turbulent convection, we have constructed a model of stationary turbulent convection that yields various turbulence statistics, including the convective flux, that are required in stellar evolution models.

Levenson, Ruth A.↗
NASA NTRS1979

Transport properties in the atmosphere of Jupiter

Activities reported include: (1) testing of the computer program used to obtain transport properties for the Hulburt-Hirschfelder potential; (2) calculation of transport properties for the C2-C interaction; (3) preliminary calculations for the C2-C2 interaction; (4) calculation of transport properties for the C2H-He interaction; (5) consideration of the effect of inelastic collisions on the transport properties; and (6) the use of the Hulburt-Hirschfelder potential to model ion-atom interactions.

Biolsi, L., Jr.↗
NASA NTRS1987

Studies of HZE particle interactions and transport for space radiation protection purposes

The main emphasis is on developing general methods for accurately predicting high-energy heavy ion (HZE) particle interactions and transport for use by researchers in mission planning studies, in evaluating astronaut self-shielding factors, and in spacecraft shield design and optimization studies. The two research tasks are: (1) to develop computationally fast and accurate solutions to the Boltzmann (transport) equation; and (2) to develop accurate HZE interaction models, from fundamental physical considerations, for use as inputs into these transport codes. Accurate solutions to the HZE transport problem have been formulated through a combination of analytical and numerical techniques. In addition, theoretical models for the input interaction parameters are under development: stopping powers, nuclear absorption cross sections, and fragmentation parameters.

Townsend, Lawrence W.↗
NASA NTRS1982

Systems evaluation of thermal bus concepts

Thermal bus concepts, to provide a centralized thermal utility for large, multihundred kilowatt space platforms, were studied and the results are summarized. Concepts were generated, defined, and screened for inclusion in system level thermal bus trades. Parametric trade studies were conducted in order to define the operational envelope, performance, and physical characteristics of each. Two concepts were selected as offering the most promise for thermal bus development. All of four concepts involved two phase flow in order to meet the required isothermal nature of the thermal bus. Two of the concepts employ a mechanical means to circulate the working fluid, a liquid pump in one case and a vapor compressor in another. Another concept utilizes direct osmosis as the driving force of the thermal bus. The fourth concept was a high capacity monogroove heat pipe. After preliminary sizing and screening, three of these concepts were selected to carry into the trade studies. The monogroove heat pipe concept was deemed unsuitable for further consideration because of its heat transport limitations. One additional concept utilizing capillary forces to drive the working fluid was added. Parametric system level trade studies were performed. Sizing and weight calculations were performed for thermal bus sizes ranging from 5 to 350 kW and operating temperatures in the range of 4 to 120 C. System level considerations such as heat rejection and electrical power penalties and interface temperature losses were included in the weight calculations.

Stalmach, D. D.↗
NASA NTRS1990

Summary of the industry/NASA/FAA workshop on philosophy of automation: Promises and realities

Issues of flight deck automation are multi-faceted and complex. The rapid introduction of advanced computer based technology on to the flight deck of transport category aircraft has had considerable impact on both aircraft operations and the flight crew. As part of NASA's responsibility to facilitate an active exchange of ideas and information between members of the aviation community, an Industry/NASA/FAA workshop was conducted in August 1988. One of the most important conclusions to emerge from the workshop was that the introduction of automation has clearly benefited aviation and has substantially improved the operational safety and efficiency of our air transport system. For example, one carrier stated that they have been flying the Boeing 767 (one of the first aircraft to employ substantial automation) since 1982, and they have never had an accident or incident resulting in damage to the aircraft. Notwithstanding its benefits, many issues associated with the design, certification, and operation of automated aircraft were identified. For example two key conceptual issues were the need for the crew to have a thorough understanding of the system and the importance of defining the pilot's role. With respect to certification, a fundamental issue is the lack of comprehensive human factors requirements in the current regulations. Operational considerations, which have been a factor in incidents involving automation, were also cited. Viewgraphs used in the presentation are given.

Norman, Susan D.↗
NASA NTRS1989

Flight deck automation: Promises and realities

Issues of flight deck automation are multifaceted and complex. The rapid introduction of advanced computer-based technology onto the flight deck of transport category aircraft has had considerable impact both on aircraft operations and on the flight crew. As part of NASA's responsibility to facilitate an active exchange of ideas and information among members of the aviation community, a NASA/FAA/Industry workshop devoted to flight deck automation, organized by the Aerospace Human Factors Research Division of NASA Ames Research Center. Participants were invited from industry and from government organizations responsible for design, certification, operation, and accident investigation of transport category, automated aircraft. The goal of the workshop was to clarify the implications of automation, both positive and negative. Workshop panels and working groups identified issues regarding the design, training, and procedural aspects of flight deck automation, as well as the crew's ability to interact and perform effectively with the new technology. The proceedings include the invited papers and the panel and working group reports, as well as the summary and conclusions of the conference.

Norman, Susan D.↗
NASA NTRS1989

Recent advances in solid polymer electrolyte fuel cell technology with low platinum loading electrodes

High power density fuel cell systems for defense and civilian applications are being developed. Taking into consideration the main causes for efficiency losses (activation, mass transport and ohmic overpotentials) the only fuel cell systems capable of achieving high power densities are the ones with alkaline and solid polymer electrolyte. High power densities (0.8 W/sq cm at 0.8 V and 1 A/sq cm with H2 and O2 as reactants), were already used in NASA's Apollo and Space Shuttle flights as auxiliary power sources. Even higher power densities (4 W/sq cm - i.e., 8 A sq cm at 0.5 V) were reported by the USAF/International Fuel Cells in advanced versions of the alkaline system. High power densities (approximately 1 watt/sq cm) in solid polymer electrolyte fuel cells with ten times lower platinum loading in the electrodes (i.e., 0.4 mg/sq cm) were attained. It is now possible to reach a cell potential of 0.620 V at a current density of 2 A/sq cm and at a temperature of 95 C and pressure of 4/5 atm with H2/O2 as reactants. The slope of the linear region of the potential-current density plot for this case is 0.15 ohm-sq cm. With H2/air as reactants and under the same operating conditions, mass transport limitations are encountered at current densities above 1.4 A/sq cm. Thus, the cell potential at 1 A/sq cm with H2/air as reactants is less than that with H2/O2 as reactants by 40 mV, which is the expected value based on electrode kinetics of the oxygen reduction reaction, and at 2 A/sq cm with H2/air as reactant is less than the corresponding value with H2/O2 as reactants by 250 mV, which is due to the considerably greater mass transport limitations in the former case.

Srinivasan, Supramaniam↗
NASA NTRS1984

Constraints on future observing plans

Scheduling considerations in the deployment of transportable laser ranging systems (TLRS) in 1985 are discussed. The new TLRS units will be field tested in North America and Europe first before being sent to remote Mediterranean and South American sites. Six weeks' residence will be required for 600 hr of measurements at each site, although a second crew could bring the necessary time down to four weeks. The surveys are set for periods of the year with the greatest incidence of clear skies. Twelve sites have been selected in the Mediterranean area, although no weather data have been acquired. Site selections are constrained by the need for accessible roads, telephones, and the stability of the terrain. Details of the marker monument layouts are provided.

Coates, R. J.↗
NASA NTRS1988

Low launch-energy trajectories to the outer solar system via Venus and earth gravity-assist flybys

Recent cancellation of the program to develop a Centaur upper stage for use in the Space Transportation System (STS) has motivated considerable interest in trajectory modes with low launch-energy requirements to the outer solar system. Flyby encounters of the inner planets, especially Venus and earth, may be used to enable missions to Jupiter, Saturn, and a restricted class of comets. An examination of mission opportunities to these targets is presented through the end of this century using gravity-assist trajectories.

Diehl, Roger↗
NASA NTRS1992

NLS propulsion design considerations

The new launch system is an evolutionary launch capability to meet the future national space launch need with significant improvements in operability and corresponding reduction in per flight costs. This improved capability is being achieved by: (1) providing the design, facilities, and infrastructure for cost effective operations; (2) developing a low cost, robust liquid hydrogen and liquid oxygen engine; and (3) using the capability and infrastructure of current tankage and shroud elements to derive a operationally efficient and highly reliable vehicle. The design and operational features of the propulsion system are key considerations in achieving the required reliability, operability and dependability. These design considerations will enable cost effective transportation to low earth orbit for a family of vehicles from 20 K to over 100 K lbs payload class.

Worlund, A. L.↗
NASA NTRS1997

A Rationale for System-Dependent Advantages and Disadvantages of Solution Crystal Growth at Low Gravity

Protein crystallization experiments at reduced gravity have yielded crystals that, depending on the specific material, are either superior or inferior in their structural perfection compared to counterparts grown at normal gravity. A reduction of the crystals' quality due to their growth at low gravity cannot be understood from existing models. Our experimental investigations of the ground-based crystallization of the protein lysozyme have revealed pronounced unsteady growth layer dynamics and associated defect formation under steady external conditions. Through scaling analysis and numerical simulations we show that the observed fluctuations originate from the coupling of bulk transport with non-linear interface kinetics under mixed kinetics-transport control of the growth rate. The amplitude of the fluctuations is smallest when either transport or interfacial kinetics dominate the control of the crystallization process. Thus, depending on the specific system, crystal quality may be improved by either enhancing or suppressing the transport in the solution. These considerations provide, for the first time, a material-dependent rationale for the advantages, as well as the disadvantages, of reduced gravity for (protein) crystallization.

Rosenberger, Franz↗
NASA NTRS2001

A Space Based Internet Protocol System for Sub-Orbital Tracking and Control

Personnel from the Goddard Space Flight Center Wallops Flight Facility (GSFC/WFF) in Virginia are responsible for the overall management of the NASA Sounding Rocket Program. Payloads are generally in support of NASA's Space Science Enterprise's missions and return a variety of scientific data as well as providing a reasonably economical means of conducting engineering tests for instruments and devices used on satellites and other spacecraft. The fifteen types of sounding rockets used by NASA can carry payloads of various weights to altitudes from 50 km to more than 1,300 km. Launch activities are conducted not only from established missile ranges, but also from remote locations worldwide requiring mobile tracking and command equipment to be transported and set up at considerable expense. The advent of low earth orbit (LEO) commercial communications satellites provides an opportunity to dramatically reduce tracking and control costs of launch vehicles and Unpiloted Aerial Vehicles (UAVs) by reducing or eliminating this ground infrastructure. Additionally, since data transmission is by packetized Internet Protocol (IP), data can be received and commands initiated from practically any location. A low cost Commercial Off The Shelf (COTS) system is currently under development for sounding rockets which also has application to UAVs and scientific balloons. Due to relatively low data rate (9600 baud) currently available, the system will first be used to provide GPS data for tracking and vehicle recovery. Range safety requirements for launch vehicles usually stipulate at least two independent tracking sources. Most sounding rockets flown by NASA now carry GPS receivers that output position data via the payload telemetry system to the ground station. The Flight Modem can be configured as a completely separate link thereby eliminating requirement for tracking radar. The system architecture which integrates antennas, GPS receiver, commercial satellite packet data modem, and a single board computer with custom software is described along with the technical challenges and the plan for their resolution. These include antenna development, high Doppler rates, reliability, environmental ruggedness, hand over between satellites and data security. An aggressive test plan is included which in addition to environmental testing measures bit error rate, latency and antenna patterns. Actual flight tests are planned for the near future on aircraft, long duration balloons and sounding rockets and these results as well as the current status of the project are reported.

Bull, Barton↗
NASA NTRS2001

A Space Based Internet Protocol System for Launch Vehicle Tracking and Control

Personnel from the Goddard Space Flight Center Wallops Flight Facility (GSFC/WFF) in Virginia are responsible for the overall management of the NASA Sounding Rocket and Scientific Balloon Programs. Payloads are generally in support of NASA's Space Science Enterprise's missions and return a variety of scientific data as well as providing a reasonably economical means of conducting engineering tests for instruments and devices used on satellites and other spacecraft. Sounding rockets used by NASA can carry payloads of various weights to altitudes from 50 km to more than 1,300 km. Scientific balloons can carry a payload weighing as much as 3,630 Kg to an altitude of 42 km. Launch activities for both are conducted not only from established ranges, but also from remote locations worldwide requiring mobile tracking and command equipment to be transported and set up at considerable expense. The advent of low earth orbit (LEO) commercial communications satellites provides an opportunity to dramatically reduce tracking and control costs of these launch vehicles and Unpiloted Aerial Vehicles (UAVs) by reducing or eliminating this ground infrastructure. Additionally, since data transmission is by packetized Internet Protocol (IP), data can be received and commands initiated from practically any location. A low cost Commercial Off The Shelf (COTS) system is currently under development for sounding rockets that also has application to UAVs and scientific balloons. Due to relatively low data rate (9600 baud) currently available, the system will first be used to provide GPS data for tracking and vehicle recovery. Range safety requirements for launch vehicles usually stipulate at least two independent tracking sources. Most sounding rockets flown by NASA now carry GP~ receivers that output position data via the payload telemetry system to the ground station. The Flight Modem can be configured as a completely separate link thereby eliminating the requirement for tracking radar. The system architecture that integrates antennas, GPS receiver, commercial satellite packet data modem, and a single board computer with custom software is described along with the technical challenges and the plan for their resolution. These include antenna development, high Doppler rates, reliability, environmental ruggedness, hand over between satellites, and data security. An aggressive test plan is included which, in addition to environmental testing, measures bit error rate, latency and antenna patterns. Actual launches on a sounding rocket and various aircraft flights have taken place. Flight tests are planned for the near future on aircraft, long duration balloons and sounding rockets. These results, as well as the current status of the project, are reported.

Bull, Barton↗