Search NASA⌕ Search

SEARCH · Search NASA

Results for “Trellis Coding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Advanced coding and modulation schemes for TDRSS

This paper describes the performance of the Ungerboeck and pragmatic 8-Phase Shift Key (PSK) Trellis Code Modulation (TCM) coding techniques with and without a (255,223) Reed-Solomon outer code as they are used for Tracking Data and Relay Satellite System (TDRSS) S-Band and Ku-Band return services. The performance of these codes at high data rates is compared to uncoded Quadrature PSK (QPSK) and rate 1/2 convolutionally coded QPSK in the presence of Radio Frequency Interference (RFI), self-interference, and hardware distortions. This paper shows that the outer Reed-Solomon code is necessary to achieve a 10(exp -5) Bit Error Rate (BER) with an acceptable level of degradation in the presence of RFI. This paper also shows that the TCM codes with or without the Reed-Solomon outer code do not perform well in the presence of self-interference. In fact, the uncoded QPSK signal performs better than the TCM coded signal in the self-interference situation considered in this analysis. Finally, this paper shows that the E(sub b)/N(sub 0) degradation due to TDRSS hardware distortions is approximately 1.3 dB with a TCM coded signal or a rate 1/2 convolutionally coded QPSK signal and is 3.2 dB with an uncoded QPSK signal.

Harrell, Linda↗

The investigation of bandwidth efficient coding and modulation techniques

The New Mexico State University Center for Space Telemetering and Telecommunications systems has been, and is currently, engaged in the investigation of trellis-coded modulation (TCM) communication systems. In particular, TCM utilizing M-ary phase shift keying is being studied. The study of carrier synchronization in a TCM environment, or in MPSK systems in general, has been one of the two main thrusts of this grant. This study has involved both theoretical modelling and software simulation of the carrier synchronization problem.

Source record↗

Soft-output decoding algorithms in iterative decoding of turbo codes

In this article, we present two versions of a simplified maximum a posteriori decoding algorithm. The algorithms work in a sliding window form, like the Viterbi algorithm, and can thus be used to decode continuously transmitted sequences obtained by parallel concatenated codes, without requiring code trellis termination. A heuristic explanation is also given of how to embed the maximum a posteriori algorithms into the iterative decoding of parallel concatenated codes (turbo codes). The performances of the two algorithms are compared on the basis of a powerful rate 1/3 parallel concatenated code. Basic circuits to implement the simplified a posteriori decoding algorithm using lookup tables, and two further approximations (linear and threshold), with a very small penalty, to eliminate the need for lookup tables are proposed.

Benedetto, S.↗

Soft-Output Decoding Algorithms in Iterative Decoding of Turbo Codes

In this article, we present two versions of a simplified maximum a posteriori decoding algorithm. The algorithms work in a sliding window form, like the Viterbi algorithm, and can thus be used to decode continuously transmitted sequences obtained by parallel concatenated codes, without requiring code trellis termination. A heuristic explanation is also given of how to embed the maximum a posteriori algorithms into the iterative decoding of parallel concatenated codes (turbo codes). The performances of the two algorithms are compared on the basis of a powerful rate 1/3 parallel concatenated code. Basic circuits to implement the simplified a posteriori decoding algorithm using lookup tables, and two further approximations (linear and threshold), with a very small penalty, to eliminate the need for lookup tables are proposed.

Benedetto, S.↗

Error control techniques for satellite and space communications

The unequal error protection capabilities of convolutional and trellis codes are studied. In certain environments, a discrepancy in the amount of error protection placed on different information bits is desirable. Examples of environments which have data of varying importance are a number of speech coding algorithms, packet switched networks, multi-user systems, embedded coding systems, and high definition television. Encoders which provide more than one level of error protection to information bits are called unequal error protection (UEP) codes. In this work, the effective free distance vector, d, is defined as an alternative to the free distance as a primary performance parameter for UEP convolutional and trellis encoders. For a given (n, k), convolutional encoder, G, the effective free distance vector is defined as the k-dimensional vector d = (d(sub 0), d(sub 1), ..., d(sub k-1)), where d(sub j), the j(exp th) effective free distance, is the lowest Hamming weight among all code sequences that are generated by input sequences with at least one '1' in the j(exp th) position. It is shown that, although the free distance for a code is unique to the code and independent of the encoder realization, the effective distance vector is dependent on the encoder realization.

Costello, Daniel J., Jr.↗

Hybrid concatenated codes and iterative decoding

Several improved turbo code apparatuses and methods. The invention encompasses several classes: (1) A data source is applied to two or more encoders with an interleaver between the source and each of the second and subsequent encoders. Each encoder outputs a code element which may be transmitted or stored. A parallel decoder provides the ability to decode the code elements to derive the original source information d without use of a received data signal corresponding to d. The output may be coupled to a multilevel trellis-coded modulator (TCM). (2) A data source d is applied to two or more encoders with an interleaver between the source and each of the second and subsequent encoders. Each of the encoders outputs a code element. In addition, the original data source d is output from the encoder. All of the output elements are coupled to a TCM. (3) At least two data sources are applied to two or more encoders with an interleaver between each source and each of the second and subsequent encoders. The output may be coupled to a TCM. (4) At least two data sources are applied to two or more encoders with at least two interleavers between each source and each of the second and subsequent encoders. (5) At least one data source is applied to one or more serially linked encoders through at least one interleaver. The output may be coupled to a TCM. The invention includes a novel way of terminating a turbo coder.

Divsalar, Dariush↗

Modulation and coding for fast fading mobile satellite communication channels

The performance of Gaussian baseband filtered minimum shift keying (GMSK) using differential detection in fast Rician fading, with a novel treatment of the inherent intersymbol interference (ISI) leading to an exact solution is discussed. Trellis-coded differentially coded phase shift keying (DPSK) with a convolutional interleaver is considered. The channel is the Rician Channel with the line-of-sight component subject to a lognormal transformation.

Mclane, P. J.↗

Rate 8/9 coded 8-PSK system for downlink applications

An advanced Coded Trellis Modulation (CTM) System which achieves a 2 bits/s/Hz bandwidth efficiency at an information rate of 200 Mbit/s while minimizing satellite power requirements, was developed for downlink earth station applications. The CTM system employs a high-speed rate 8/9 convolutional code with Viterbi decoding and an 8-Phase Shift Keying (PSK) modem. The minimum Euclidean distance between the modulated waveforms corresponding to the information sequences are maximized in order to maximize the noise immunity of the system. Nyquist filters with a square-root of 40 percent roll-off are used at the transmit and receive sides of the modem in order to minimize intersymbol interference, adjacent channel interference, and distortion at the nonlinear satellite power amplifier. The use of a coded system here also minimizes the effects of co-channel interference. The developed performance of the hardware system was measured to achieve within 1.5 dB from theory at a bit error rate of 5 x 10(exp -7) over an additive white Gaussian noise channel.

Fang, Russell↗

Modulation and coding for throughput-efficient optical free-space links

Optical direct-detection systems are currently being considered for some high-speed inter-satellite links, where data-rates of a few hundred megabits per second are evisioned under power and pulsewidth constraints. In this paper we investigate the capacity, cutoff-rate and error-probability performance of uncoded and trellis-coded systems for various modulation schemes and under various throughput and power constraints. Modulation schemes considered are on-off keying (OOK), pulse-position modulation (PPM), overlapping PPM (OPPM) and multi-pulse (combinatorial) PPM (MPPM).

Georghiades, Costas N.↗

Soft-decision Viterbi decoding with diversity combining

Diversity combining methods for convolutional coded and soft-decision Viterbi decoded channels in mobile satellite communications systems are evaluated and it is clarified that the pre-Viterbi-decoding maximal ratio combining shows better performance than other methods in Rician fading channels by computer simulation. A novel practical technique for maximal ratio combining is proposed, in which the coefficients for weighting are derived from soft-decision demodulated signals only. The proposed diversity combining method with soft-decision Viterbi decoding requires simple hardware and shows satisfactory performance with slight degradation of 0.3 dB in Rician fading channels compared with an ideal weighting scheme. Furthermore, this diversity method is applied to trellis coded modulation and significant Pe performance improvement is achieved.

Sakai, T.↗

Near-toll quality digital speech transmission in the mobile satellite service

This paper discusses system considerations for near-toll quality digital speech transmission in a 5 kHz mobile satellite system channel. Tradeoffs are shown for power performance versus delay for a 4800 bps speech compression system in conjunction with a 16 state rate 2/3 trellis coded 8PSK modulation system. The suggested system has an additional 150 ms of delay beyond the propagation delay and requires an E(b)/N(0) of about 7 dB for a Ricean channel assumption with line-of-sight to diffuse component ratio of 10 assuming ideal synchronization. An additional loss of 2 to 3 dB is expected for synchronization in fading environment.

Townes, S. A.↗

An 8-DPSK TCM modem for MSAT-X

This paper describes the real-time digital implementation of an 8-differentiated phase-shift keying (DPSK) trellis-coded modulation (TCM) modem for operation on an L-band, 5 kHz wide, land mobile satellite (LMS) channel. The modem architecture as well as some of the signal processing techniques employed in the modem to combat the LMS channel impairments are described, and the modem performance over the fading channel is presented.

Jedrey, Thomas C.↗

Performance analysis of an optimal file transfer protocol for integrated mobile satellite services

A file-transfer protocol based on the selective-repeat automatic-retransmission-request (ARQ) scheme has been developed for the Mobile Satellite Experiment (MSAT-X). In this protocol, each file is divided into packets, which are error-detected and acknowledge individually. A file can be transferred in either the open- or closed-end connection. In the open-end connection, the file is transmitted continuously according to the selective-repeat scheme until all packets are positively acknowledged; in the closed-end connection, each retransmission will initiate its own connection request. The relationship between the packet size and the average end-to-end delay in the mobile fading environment is investigated. The communications channel uses trellis-coded modulation with symbol interleaving, packet replication, and error detection. The packet error performance in such a channel is evaluated by simulation, and the optimal packet size for various operating conditions is derived, using the simulated results. It is shown that for a symbol-energy-to-noise ratio of 12 dB, each file should be divided into packets of length between 256 bits and 512 bits (excluding the overhead) to minimize the average end-to-end delay.

Wang, Charles C.↗

Some implications of TCM for optical direct-detection channels

Consideration is given to the optical direct-detection channel, and it is shown how simple trellis-coded modulation (TCM) can be used to improve performance or increase throughput (in bits per second) without bandwidth expansion or performance loss. In fact, a modest performance gain can be achieved. Although the approach can be used with other signal constellations, the authors concentrate on signals derived from the pulse-position modulation (PPM) format by allowing overlap. Theoretical motivation for using this signal set, known as overlapping PPM (OPPM), was recently given by David and Kaplan (1984), who showed a capacity gain when overlap is introduced.

Georghiades, Costas N.↗

Performance evaluation of land mobile satellite system under vegetative shadowing using differential multiple TCM and QPSK

A comparative analysis by computer simulation of the land mobile satellite system (LMSS) is presented for the uncoded quadrature phase shift keying (QPSK), rate 2/3 8-PSK trellis coded modulation (TCM), and rate 4/6 multiplicity 2 8-PSK TCM schemes. An analytical model is used for simulating the fading channel. The simulation results show that under Rayleigh fades, the TCM designed for the fading channel is superior to uncoded QPSK and to the conventional TCM optimized for the additive white Gaussian noise (AWGN) channel. The performance of differentially detected TCM under AWGN and fading is examined based on the preliminary results. Results of the uncoded QPSK with fading channel modeled with the empirical fade data are given.

Kim, Junghwan↗

A simple implementation of the Viterbi algorithm on the Motorola DSP56001

As systems designers design communication systems with digital rather than analog components to reduce noise and increase channel capacity, they must have the ability to perform traditional communication algorithms digitally. The use of trellis coded modulation as well as the extensive use of convolutional encoding for error detection and correction requires an efficient digital implementation of the Viterbi Algorithm for real time demodulation and decoding. Digital signal processors are now fast enough to implement Viterbi decoding in conjunction with the normal receiver/transmitter functions for lower speed channels on a single chip as well as performing fast decoding for higher speed channels, if the algorithm is implemented efficiently. The purpose of this paper is to identify a good way to implement the Viterbi Algorithm (VA) on the Motorola DSP56001, balancing performance considerations with speed and memory efficiency.

Messer, Dion D.↗

Carrier recovery techniques on satellite mobile channels

An analytical method and a stored channel model were used to evaluate error performance of uncoded quadrature phase shift keying (QPSK) and M-ary phase shift keying (MPSK) trellis coded modulation (TCM) over shadowed satellite mobile channels in the presence of phase jitter for various carrier recovery techniques.

Vucetic, B.↗

Modem Handles Data At 160 Mb/s

Trellis-coded octal-phase-shift-keying modem transmits and receives continuous or bursted digital data for satellite applications. Helps satisfy increasing demands for communication of high-speed digital data from sources like high-performance computers and high-definition television transmitters, as well as multiplexed signals from slower signal sources. Increases maximum effective bit rate accommodated in standard 72-MHz-wide commercial satellite-transponder radio channel from 120 Mb/s to 160 Mb/s. Principal advantages: spectral efficiency and power efficiency.

Budinger, James M.↗