Search NASA⌕ Search

SEARCH · Search NASA

Results for “Unstructured algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Self-Avoiding Walks over Adaptive Triangular Grids

In this paper, we present a new approach to constructing a "self-avoiding" walk through a triangular mesh. Unlike the popular approach of visiting mesh elements using space-filling curves which is based on a geometric embedding, our approach is combinatorial in the sense that it uses the mesh connectivity only. We present an algorithm for constructing a self-avoiding walk which can be applied to any unstructured triangular mesh. The complexity of the algorithm is O(n x log(n)), where n is the number of triangles in the mesh. We show that for hierarchical adaptive meshes, the algorithm can be easily parallelized by taking advantage of the regularity of the refinement rules. The proposed approach should be very useful in the run-time partitioning and load balancing of adaptive unstructured grids.

Heber, Gerd↗
NASA NTRS1993

Hypersonic flow computations around re-entry vehicles

The development of an algorithm for the solution of the compressible Euler equations at high Mach numbers on unstructured tetrahedral meshes is described. The basic algorithm is constructed in the form of a central difference scheme plus an explicit added artificial viscosity based upon fourth order differences of the solution. The stability of the solution in the vicinity of strong gradients is preserved by the incorporation of an additional artificial viscosity based upon a second order difference. Higher order accuracy is regained by using the ideas of flux corrected transport to limit the amount of added viscosity. The solution is advanced to steady state by means of an explicit multi-stage time-stepping method. The computational efficiency of the complete process is improved by incorporating an unstructured multigrid acceleration procedure. A number of flows of practical interest are analyzed to demonstrate the numerical performance of the proposed approach.

Peraire, J.↗
NASA NTRS1989

Unstructured mesh solution of the Euler and Navier-Stokes equations

Mesh generation procedures as well as solution algorithms for solving the Euler and Navier-Stokes equations on unstructured meshes are presented. The solution algorithms discussed utilize approximate Riemann solver, upwind differencing to achieve high spatial accuracy. Numerical results for Euler flow over single and multi-element airfoils are presented.

Barth, Timothy J.↗
NASA NTRS1992

Conservative Grid-Interface Algorithm For Computing Flows

Best features of structured- and unstructured-grid methods combined. Gaps and overlaps between zonal grids eliminated by grid-interface algorithm, which generates single interfacial grid and corrects fluxes of flow quantities accordingly. Incorporated into two three-dimensional Navier-Stokes finite-volume codes and tested in computations of incompressible and compressible flows about simple bodies. Good numerical results obtained. General enough to be incorporated into other finite-volume codes without restrictions on complexities of shapes of bodies and zonal interfaces.

Klopfer, G. H.↗
NASA NTRSDate not supplied

Derivation of Effective Properties Based on Porous Scale Simulations Using Filtering Techniques

This study presents a method for derivation of effective properties at the interface and in-depth of porous materials. The method defines a Representative Elementary Volume (REV) and applies filtering techniques to computer effective properties such as porosity and flow quantities, such as velocity and pressure. The script, developed to process the data was tested on the VTK type files that contain the mesh information and the flow solution. The method allows to choose between two types of filters, such as cellular and top-hat and define the size of the REV and number of samples along the domain. Extraction of the REV from the domain is performed to exact boundaries requested for the user. This is done using a triangulation technique and cutting through the cells to comply to the requested boundaries of the volume. The method can be applied to both structured and unstructured meshes. Filtering the material porosity and flow quantities involves integration of the numerical data. The algorithm provides three integration methods, such as Riemann sum, Monte Carlo and Quadrature rule to perform the integration. The Monte-Carlo technique permits the use of either uniform or linearly spaced distribution of points. The Quadrature rule is currently applicable to tetrahedral element types. The Monte Carlo and Quadrature rule methods require interpolation of the flow quantities at the sample points. For interpolation, two methods were tested and are readily available, Gaussian interpolation and re-sampling. It has been shown that re-sampling method has better consistency and acceptable accuracy in interpolation of the data. The algorithm was written in Python language and uses a number of modules. The major module besides numpy is PyVista. It is used to process the computational domain, clip the REV and interpolate the data. Quadrature rule integration was performed using a quadpy module. ParaView software was used externally to convert the flow solution to the VTK (or more specifically VTU) format. Integration of ParaView in the same environment with PyVista encountered problems and could not be implemented in this work. The developed algorithm is expected to be applicable to unstructured meshes and more complex porous structures as soon as the data can be passed in VTK type format. With the report is provided Python script for filtering the solution and a Matlab script for simple generation and processing of 2-D and 3-D porous channel geometries. The two scripts don't communicate.

Alexsander Zibitsker↗
NASA NTRS1998

Nested Quantum Search and NP-Complete Problem

A quantum algorithm is known that solves an unstructured search problem in a number of iterations of order square-root of d, where d is the dimension of the search space, whereas any classical algorithm scales as O(d).

NP-complete problems quantum search algorithm tree↗
NASA NTRS1989

Unsteady aerodynamics methods for transonic aeroelastic analysis

The paper describes the current status of methods development for transonic aeroelastic analysis within the Unsteady Aerodynamics Branch at NASA Langley. The paper first highlights the development of an approximate factorization (AF) algorithm for solution of the unsteady transonic small-distribution (TSD) equation. The AF algorithm has been used as the basis for a three-dimensional TSD code for complete aircraft applications. The paper also describes the development of solution algorithms for the unsteady Euler equations based on the use of unstructured meshes. These Euler methods contain a dynamic mesh algorithm, which is a general procedure to move or deform the mesh so that it continuously conforms to the instantaneous shape of the aeroelastically deformed vehicle.

Batina, John T.↗
NASA NTRS1997

Out-of-Core Streamline Visualization on Large Unstructured Meshes

It's advantageous for computational scientists to have the capability to perform interactive visualization on their desktop workstations. For data on large unstructured meshes, this capability is not generally available. In particular, particle tracing on unstructured grids can result in a high percentage of non-contiguous memory accesses and therefore may perform very poorly with virtual memory paging schemes. The alternative of visualizing a lower resolution of the data degrades the original high-resolution calculations. This paper presents an out-of-core approach for interactive streamline construction on large unstructured tetrahedral meshes containing millions of elements. The out-of-core algorithm uses an octree to partition and restructure the raw data into subsets stored into disk files for fast data retrieval. A memory management policy tailored to the streamline calculations is used such that during the streamline construction only a very small amount of data are brought into the main memory on demand. By carefully scheduling computation and data fetching, the overhead of reading data from the disk is significantly reduced and good memory performance results. This out-of-core algorithm makes possible interactive streamline visualization of large unstructured-grid data sets on a single mid-range workstation with relatively low main-memory capacity: 5-20 megabytes. Our test results also show that this approach is much more efficient than relying on virtual memory and operating system's paging algorithms.

Ueng, Shyh-Kuang↗
NASA NTRS2014

Development, Verification and Validation of Parallel, Scalable Volume of Fluid CFD Program for Propulsion Applications

There are many instances involving liquid/gas interfaces and their dynamics in the design of liquid engine powered rockets such as the Space Launch System (SLS). Some examples of these applications are: Propellant tank draining and slosh, subcritical condition injector analysis for gas generators, preburners and thrust chambers, water deluge mitigation for launch induced environments and even solid rocket motor liquid slag dynamics. Commercially available CFD programs simulating gas/liquid interfaces using the Volume of Fluid approach are currently limited in their parallel scalability. In 2010 for instance, an internal NASA/MSFC review of three commercial tools revealed that parallel scalability was seriously compromised at 8 cpus and no additional speedup was possible after 32 cpus. Other non-interface CFD applications at the time were demonstrating useful parallel scalability up to 4,096 processors or more. Based on this review, NASA/MSFC initiated an effort to implement a Volume of Fluid implementation within the unstructured mesh, pressure-based algorithm CFD program, Loci-STREAM. After verification was achieved by comparing results to the commercial CFD program CFD-Ace+, and validation by direct comparison with data, Loci-STREAM-VoF is now the production CFD tool for propellant slosh force and slosh damping rate simulations at NASA/MSFC. On these applications, good parallel scalability has been demonstrated for problems sizes of tens of millions of cells and thousands of cpu cores. Ongoing efforts are focused on the application of Loci-STREAM-VoF to predict the transient flow patterns of water on the SLS Mobile Launch Platform in order to support the phasing of water for launch environment mitigation so that vehicle determinantal effects are not realized.

West, Jeff↗
NASA NTRS1998

Three-Dimensional High-Lift Analysis Using a Parallel Unstructured Multigrid Solver

A directional implicit unstructured agglomeration multigrid solver is ported to shared and distributed memory massively parallel machines using the explicit domain-decomposition and message-passing approach. Because the algorithm operates on local implicit lines in the unstructured mesh, special care is required in partitioning the problem for parallel computing. A weighted partitioning strategy is described which avoids breaking the implicit lines across processor boundaries, while incurring minimal additional communication overhead. Good scalability is demonstrated on a 128 processor SGI Origin 2000 machine and on a 512 processor CRAY T3E machine for reasonably fine grids. The feasibility of performing large-scale unstructured grid calculations with the parallel multigrid algorithm is demonstrated by computing the flow over a partial-span flap wing high-lift geometry on a highly resolved grid of 13.5 million points in approximately 4 hours of wall clock time on the CRAY T3E.

Mavriplis, Dimitri J.↗
NASA NTRS2013

Functional Equivalence Acceptance Testing of FUN3D for Entry Descent and Landing Applications

The functional equivalence of the unstructured grid code FUN3D to the the structured grid code LAURA (Langley Aerothermodynamic Upwind Relaxation Algorithm) is documented for applications of interest to the Entry, Descent, and Landing (EDL) community. Examples from an existing suite of regression tests are used to demonstrate the functional equivalence, encompassing various thermochemical models and vehicle configurations. Algorithm modifications required for the node-based unstructured grid code (FUN3D) to reproduce functionality of the cell-centered structured code (LAURA) are also documented. Challenges associated with computation on tetrahedral grids versus computation on structured-grid derived hexahedral systems are discussed.

Gnoffo, Peter A.↗
NASA NTRS1993

Advancing-Front Algorithm For Delaunay Triangulation

Efficient algorithm performs Delaunay triangulation to generate unstructured grids for use in computing two-dimensional flows. Once grid generated, one can optionally call upon additional subalgorithm that removes diagonal lines from quadrilateral cells nearly rectangular. Resulting approximately rectangular grid reduces cost per iteration of flow-computing algorithm.

Merriam, Marshal L.↗
NASA NTRS1995

Adaptive Mesh Refinement in Curvilinear Body-Fitted Grid Systems

To be truly compatible with structured grids, an AMR algorithm should employ a block structure for the refined grids to allow flow solvers to take advantage of the strengths of unstructured grid systems, such as efficient solution algorithms for implicit discretizations and multigrid schemes. One such algorithm, the AMR algorithm of Berger and Colella, has been applied to and adapted for use with body-fitted structured grid systems. Results are presented for a transonic flow over a NACA0012 airfoil (AGARD-03 test case) and a reflection of a shock over a double wedge.

Steinthorsson, Erlendur↗
NASA NTRS1991

Conservative multizonal interface algorithm for the 3-D Navier-Stokes equations

A conservative zonal interface algorithm using features of both structured and unstructured mesh CFD technology is presented. The flow solver within each of the zones is based on structured mesh CFD technology. The interface algorithm was implemented into two three-dimensional Navier-Stokes finite volume codes and was found to yield good results.

Klopfer, G. H.↗
NASA NTRS1991

Unstructured Euler flow solutions using hexahedral cell refinement

An attempt is made to extend grid refinement into three dimensions by using unstructured hexahedral grids. The flow solver is developed using the TIGER (topologically Independent Grid, Euler Refinement) as the starting point. The program uses an unstructured hexahedral mesh and a modified version of the Jameson four-stage, finite-volume Runge-Kutta algorithm for integration of the Euler equations. The unstructured mesh allows for local refinement appropriate for each freestream condition, thereby concentrating mesh cells in the regions of greatest interest. This increases the computational efficiency because the refinement is not required to extend throughout the entire flow field.

Melton, John E.↗
NASA NTRS1996

Optimal and robust control of transition

Optimal and robust control theories are used to determine feedback control rules that effectively stabilize a linearly unstable flow in a plane channel. Wall transpiration (unsteady blowing/suction) with zero net mass flux is used as the control. Control algorithms are considered that depend both on full flowfield information and on estimates of that flowfield based on wall skin-friction measurements only. The development of these control algorithms accounts for modeling errors and measurement noise in a rigorous fashion; these disturbances are considered in both a structured (Gaussian) and unstructured ('worst case') sense. The performance of these algorithms is analyzed in terms of the eigenmodes of the resulting controlled systems, and the sensitivity of individual eigenmodes to both control and observation is quantified.

Bewley, T. R.↗
NASA NTRS1989

An adaptive implicit/explicit finite element scheme for compressible viscous high speed flow

An adaptive implicit/explicit finite element procedure for the solution of three-dimensional problems of steady compressible viscous high-speed flows is presented. In the vicinity of solid walls, a grid-exhibiting structure in the normal direction is employed, while away from this region the grid is totally unstructured. The implicit form of the algorithm is used near solid walls, with the grid structure being utilized in an equation solution approach based upon line relaxation. The explicit form of the algorithm is used elsewhere. Grid adaptation is achieved by means of adaptive remeshing. To illustrate the performance of the proposed method, solutions are obtained for the problems of shock-boundary layer interaction and shock-shock interaction on a swept cylindrical leading edge. Comparisons are made with experimental observations.

Hassan, O.↗
NASA NTRS1990

On unstructured grids and solvers

The fundamentals and the state-of-the-art technology for unstructured grids and solvers are highlighted. Algorithms and techniques pertinent to mesh generation are discussed. It is shown that grid generation and grid manipulation schemes rely on fast multidimensional searching. Flow solution techniques for the Euler equations, which can be derived from the integral form of the equations are discussed. Sample calculations are also provided.

Barth, T. J.↗