Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Hydride vapor phase GaN films with reduced density of residual electrons and deep traps

Electrical properties and deep electron and hole traps spectra are compared for undoped n-GaN films grown by hydride vapor phase epitaxy (HVPE) in the regular process (standard HVPE samples) and in HVPE process optimized for decreasing the concentration of residual donor impurities (improved HVPE samples). It is shown that the residual donor density can be reduced by optimization from ∼10{sup 17} cm{sup −3} to (2–5) × 10{sup 14} cm{sup −3}. The density of deep hole traps and deep electron traps decreases with decreased donor density, so that the concentration of deep hole traps in the improved samples is reduced to ∼5 × 10{sup 13} cm{sup −3} versus 2.9 × 10{sup 16} cm{sup −3} in the standard samples, with a similar decrease in the electron traps concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Compositionally graded Ga 1-x In x P buffers grown by static and dynamic hydride vapor phase epitaxy at rates up to 1 μm/min

Here, we demonstrate Ga 1-x In x P compositionally graded buffers (CGBs) grown on GaAs with lattice constants between GaAs and InP by hydride vapor phase epitaxy (HVPE). Growth rates were up to ~1 μm/min and threading dislocation density (TDD) was as low as 1.0 x 10 6 cm -2 . We studied the effect of substrate offcut direction, growth rate, and strain grading rate on CGB defect structure. We compared the effect of a “dynamic grading” style, which creates compositional interfaces via mechanical transfer of a substrate between two growth chambers, vs. “static grading” where the CGB grows in a single chamber. Dynamic grading yielded smoother grades with higher relaxation, but TDD was not significantly different between the two styles. Substrate offcut direction was the most important factor for obtaining CGBs with low defect density. (001) substrates offcut towards (111)B yielded smoother CGBs with lower TDD compared to CGBs grown on substrates offcut towards (111)A. Transmission electron microscopy of static and dynamic CGBs grown on A and B-offcuts only found evidence of phase separation in a static A-offcut CGB, indicating that the B offcut limits phase separation, which in turn keeps TDD low. Reduced growth rate led to the appearance CuPt-type atomic ordering, which affected the distribution of dislocations on the active glide planes but did not alter TDD. Higher growth rates led to smoother CGBs and did not appreciably increase TDD as otherwise predicted by steady-state models of plastic relaxation. These results show HVPE’s promise for lattice-mismatched applications and low-c ost InP virtual substrates on GaAs

36 MATERIALS SCIENCE↗

GaAs growth rates of 528 μm/h using dynamic-hydride vapor phase epitaxy with a nitrogen carrier gas

Herein we demonstrate record GaAs growth rates approaching 530 μm/h using nitrogen carrier gas and 400 μm/h using hydrogen carrier gas in a dynamic-hydride vapor phase epitaxy reactor. We measured root mean square surface roughness below 1 nm using a 1 μm × 1 μm atomic force microscopy scan for GaAs growth rates up to 483 μm/h using a nitrogen carrier gas and 400 μm/h using a hydrogen carrier gas. We performed computational fluid dynamics modeling to study the effect of the carrier gas choice on the thermal profile within the reactor and how that influences the degree of AsH 3 decomposition. The modeling suggests that the lower thermal conductivity of the nitrogen carrier gas minimizes the amount of AsH 3 that thermally decomposes before reaching the wafer surface and the heavier atomic mass decreases the likelihood that AsH 3 will reach the heated reactor walls, leading to a growth rate enhancement relative to the hydrogen carrier case in a hydride-enhanced growth regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoresponse properties of large-area MoS{sub 2} atomic layer synthesized by vapor phase deposition

Photoresponse properties of a large area MoS{sub 2} atomic layer synthesized by vapor phase deposition method without any catalyst are studied. Scanning electron microscopy, atomic force microscopy, Raman spectrum, and photoluminescence spectrum characterizations confirm that the two-dimensional microstructures of MoS{sub 2} atomic layer are of high quality. Photoelectrical results indicate that the as-prepared MoS{sub 2} devices have an excellent sensitivity and a good reproducibility as a photodetector, which is proposed to be ascribed to the potential-assisted charge separation mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vapor phase photo-electrochemical cell

This disclosure provides systems, methods, and apparatus related to a vapor phase photo-electrochemical cell. In one aspect, a device includes a photovoltaic cell, a cathode disposed on the photovoltaic cell, an ionomer membrane disposed on the cathode, and an anode disposed on the ionomer membrane. The cathode includes a cathode catalyst. The ionomer membrane is in contact with the cathode catalyst. The anode includes an anode catalyst. The anode catalyst is in contact with the ionomer membrane. The anode, the ionomer membrane, and the cathode are transmissive to the solar radiation spectrum.

Larson, David M.↗

Measurement of valence-band offsets of InAlN/GaN heterostructures grown by metal-organic vapor phase epitaxy

The valence band offsets, {Delta}E{sub V}, of In{sub 0.17}Al{sub 0.83}N/GaN, In{sub 0.25}Al{sub 0.75}N/GaN, and In{sub 0.30}Al{sub 0.70}N/GaN heterostructures grown by metal-organic vapor phase epitaxy were evaluated by using x-ray photoelectron spectroscopy (XPS). The dependence of the energy position and the full width at half maximum of the Al 2p spectrum on the exit angle indicated that there was sharp band bending caused by the polarization-induced electric field combined with surface Fermi-level pinning in each ultrathin InAlN layer. The {Delta}E{sub V} values evaluated without taking into account band bending indicated large discrepancies from the theoretical estimates for all samples. Erroneous results due to band bending were corrected by applying numerical calculations, which led to acceptable results. The evaluated {Delta}E{sub V} values were 0.2{+-}0.2 eV for In{sub 0.17}Al{sub 0.83}N/GaN, 0.1{+-}0.2 eV for In{sub 0.25}Al{sub 0.75}N/GaN, and 0.0{+-}0.2 eV for In{sub 0.30}Al{sub 0.70}N/GaN. Despite the large decrease of around 1.0 eV in the band gap of InAlN layers according to the increase in the In molar fraction, the decrease in {Delta}E{sub V} was as small as 0.2 eV. Therefore, the change in band-gap discontinuity was mainly distributed to that in conduction band offset.

36 MATERIALS SCIENCE↗

InAs{sub (1 –} {sub y)}Sb{sub y}/InAsSbP Narrow-Gap Heterostructures (y = 0.09–0.16) Grown by Metalorganic Vapor Phase Epitaxy for the Spectral Range of 4–6 μm

Asymmetric n-InAs/InAs{sub (1 –} {sub y)}Sb{sub y}/p-InAsSbP heterostructures with a narrow-gap active layer and a composition range y = 0.09–0.16 were grown by vapor phase epitaxy from metalorganic compounds. Room-temperature electroluminescence was observed at a wavelength of up to λ = 5.1 μm at a spectral maximum. The study of low-temperature electroluminescence spectra provided the possibility to establish the existence of two radiative recombination channels caused by the nature of the InAsSb/InAsSbP heterointerface. The effect produced by the chemistry of the active layer on the composition of the grown barrier layer and the formation of the InAsSb/InAsSbP heterojunction with an increase in the antimony content in the InAsSb solid solution was demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge transport properties of p-CdTe/n-CdTe/n{sup +}-Si diode-type nuclear radiation detectors based on metalorganic vapor-phase epitaxy-grown epilayers

Charge transport properties of p-CdTe/n-CdTe/n{sup +}-Si diode-type nuclear radiation detectors, fabricated by growing p-and n-type CdTe epilayers on (211) n{sup +}-Si substrates using metalorganic vapor-phase epitaxy (MOVPE), were studied by analyzing current-voltage characteristics measured at various temperatures. The diode fabricated shows good rectification properties, however, both forward and reverse biased currents deviate from their ideal behavior. The forward current exhibits typical feature of multi-step tunneling at lower biases; however, becomes space charge limited type when the bias is increased. On the other hand, the reverse current exhibits thermally activated tunneling-type current. It was found that trapping centers at the p-CdTe/n-CdTe junction, which were formed due to the growth induced defects, determine the currents of this diode, and hence limit the performance of the nuclear radiation detectors developed.

36 MATERIALS SCIENCE↗

Specific features of nanosize object formation in an InSb/InAs system by metal-organic vapor-phase epitaxy

InSb quantum dashes (up to 4 Multiplication-Sign 10{sup 9} cm{sup -2}) and quantum dots (QDs) (7 Multiplication-Sign 10{sup 9} cm{sup -2}) were produced on InAs (100) substrates by the standard method of metal-organic vapor-phase epitaxy in the temperature range 420-440 Degree-Sign C. A transformation of the shape and size of the quantum dashes is observed depending on the technological conditions of epitaxial deposition (quality of the matrix surface, growth temperature, flow rate, ratio between Group-V and -III elements in the gas phase, etc.). Control over the diffusion rate of reagents on the surface of the matrix based on an InAs epitaxial layer leads to a change in the transverse dimensions of the quantum dashes being deposited within the range 150-500 nm in length and 100-150 nm in width, respectively, with their height remaining at 50 nm. InSb QDs are grown on the surface of the InAs substrate at T = 440 Degree-Sign C. A bimodal size distribution of the nano-objects is observed: there are small (average height 15 nm; average diameter 60 nm) and large (average height 25 nm; average diameter 110 nm) QDs.

36 MATERIALS SCIENCE↗

Unexpected bismuth concentration profiles in metal-organic vapor phase epitaxy-grown Ga(As{sub 1−x}Bi{sub x})/GaAs superlattices revealed by Z-contrast scanning transmission electron microscopy imaging

A set of GaAs{sub 1−x}Bi{sub x}/GaAs multilayer quantum-well structures was deposited by metal-organic vapor phase epitaxy at 390 °C and 420 °C. The precursor fluxes were introduced with the intent of growing discrete and compositionally uniform GaAs{sub 1−x}Bi{sub x} well and GaAs barrier layers in the epitaxial films. High-resolution high-angle annular-dark-field (or “Z-contrast”) scanning transmission electron microscopy imaging revealed concentration profiles that were periodic in the growth direction, but far more complicated in shape than the intended square wave. The observed composition profiles could explain various reports of physical properties measurements that suggest compositional inhomogeneity in GaAs{sub 1−x}Bi{sub x} alloys as they currently are grown.

36 MATERIALS SCIENCE↗

Photodiodes based on self-assembled GeSi/Si(001) nanoisland arrays grown by the combined sublimation molecular-beam epitaxy of silicon and vapor-phase epitaxy of germanium

We investigate the photosensitivity spectra of photodiodes based on Si p-i-n structures with single-layered and multilayer self-assembled GeSi/Si(001) nanoisland arrays in the i region, which are grown using a technique combining Si molecular-beam epitaxy and Ge vapor-phase epitaxy, in dependence on the temperature, diode bias, and GeSi nanoisland parameters. We show that the temperature and field dependences of the diode photosensitivity in the spectral range of the interband optical absorption in GeSi nanoislands are determined by the ratio between the rate of emission of photoexcited holes from the nanoislands and the rate of the recombination of excess carriers in them. We demonstrate the possibility of determination of the hole recombination lifetime in GeSi nanoislands from the temperature and field dependences of the photosensitivity.

36 MATERIALS SCIENCE↗

Coupling hydropyrolysis and vapor-phase catalytic hydrotreatment to produce biomethane from pine sawdust

Here, this study investigated hydropyrolysis and subsequent vapor-phase hydrotreatment over a NiAl 2 O 4 catalyst to produce biomethane (CH 4 ) from pine sawdust. The non-catalytic pressurized hydropyrolysis generated tar, CO 2 , and CO as the primary products. However, using a NiAl 2 O 4 catalyst in the second-stage reactor significantly increased the formation of CH 4 and reduced CO and CO 2 in gas products. The catalyst also fully converted tar intermediates to produce CH 4 , resulting in a maximum carbon yield of 77.7% with 97.8% selectivity. The temperature plays a crucial role in CH 4 generation, with both its yield and selectivity showing a positive correlation with the reaction temperature. Increasing the reaction pressure from 0.2 to 1.2 MPa notably inhibited the production of CH 4 , leading to a shift towards cycloalkanes due to a competitive reaction. This tandem approach shows great potential as an innovative technique for producing alternative fuels from biomass wastes.

09 BIOMASS FUELS↗

On a reduction in cracking upon the growth of AlN on Si substrates by hydride vapor-phase epitaxy

The main problem of the epitaxial growth of thick AlN layers on a Si substrate consists in the formation of cracks, which complicates the application of structures of this kind in the fabrication of semiconductor devices. The possibility of obtaining crack-free AlN layers with a thickness exceeding 1 μm and a mirror- smooth surface by hydride vapor-phase epitaxy is demonstrated. The properties of the layers are studied by X-diffraction analysis, optical and scanning electron microscopy, and Raman spectroscopy.

36 MATERIALS SCIENCE↗

Growth of ZnSe{sub 1-x}S{sub x} solid solution crystals from vapor phase

Partially faceted ZnSe{sub 1-x}S{sub x} solid solution crystals have been grown from a vapor phase in a closed stationary horizontal system. The growth has been performed in cylindrical quartz ampoules-{approx}10 mm in diameter and evacuated to a residual pressure of less than {approx}10{sup -3} Pa-at a temperature of 1050{sup o}C and a temperature drop between the source and growth zones of 10-16 deg. C. The crystal structure, optical absorption, and composition inhomogeneity along the ingot length have been investigated by X-ray diffractometry and optical spectroscopy in the wavelength range of 300-3000 nm. The solid-solution composition range corresponding to cubic polymorphs is determined. The concentration dependences of the lattice parameter and band gap are presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reduced Stochastic Resistive Switching in Organic-Inorganic Hybrid Memristors by Vapor-Phase Infiltration

We report resistive random-access memory (RRAM) is promising for next-generation data storage and non-von Neumann computing hardware. However, tuning device switching characteristics and particularly, controlling their stochastic variation remain as critical challenges. Here, new organic-inorganic hybrid RRAM media are reported whose bipolar switching characteristics and stochasticity can be controlled by vapor-phase infiltration (VPI), an ex situ hybridization technique derived from atomic layer deposition. Hybrid RRAMs based on AlO x -infiltrated SU-8 feature facile tunability of device switching voltages, off-state current, and on-off ratio by adjusting the amount of infiltrated AlO x in the hybrid. Furthermore, a significant reduction in the stochastic, cycle-to-cycle variations of switching parameters is enabled by AlO x infiltration, driven by the infiltration-induced changes in mechanical, dielectric, and chemical properties of organic medium and their influence on the dimension and formation characteristics of conductive filaments. Finally, multi-level analog switching potentially useful for neuromorphic applications are demonstrated, along with direct, one-step device patterning exploiting the negative-tone resist feature of SU-8. With the demonstrated control over switching characteristics and stochastic variation, combined with analog switching and one-step patterning capabilities, the results not only present a novel hybrid medium for RRAM applications but also showcase the utility of VPI for developing new, high-performance hybrid RRAM devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Validation and application of a multiphase CFD model for hydrodynamics, temperature field and RTD simulation in a pilot-scale biomass pyrolysis vapor phase upgrading reactor

Accurate prediction of transport phenomena is critical for VPU reactor design, optimization, and scale-up. The current study focused on the validation and application of a multiphase CFD model within an open-source code MFiX for hydrodynamics, temperature field, and residence time distribution (RTD) simulation in a non-reacting circulating fluidized bed riser for biomass pyrolysis vapor phase upgrading (VPU). First, an Eulerian-Eulerian approach three-dimensional CFD model was employed to simulate the pilot-scale VPU riser on the supercomputer Joule. Excellent quantitative agreement between experimental and simulated results was achieved for pressure drops and temperature field in a range of operating conditions. Then the validated multiphase CFD model was applied to predict gas and solid residence time distributions (RTDs) since prediction and analysis of RTD is an important tool to study the complex multiphase flow behavior and mixing inside chemical reactors. The predictions show that solid mean residence time is 3.5 times the gas residence time; the solid RTD is more sensitive to the process gas flow rate than the solids circulation rate.

09 BIOMASS FUELS↗