Search NASA⌕ Search

SEARCH · Search NASA

Results for “VIBRATION AND FLUTTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1957

Results of Two Free-fall Experiments on Flutter of Thin Unswept Wings in the Transonic Speed Range

Results of four thin, unswept, flutter airfoils attached to two freely falling bodies are reported. Two airfoils fluttered at a Mach number of 0.85, a third airfoil fluttered at a Mach number of 1.03, and a fourth fluttered at a Mach number of 1.07. Results of calculations of flutter speed using incompressible and compressible air-force coefficients, including a Mach number of 1.0, are presented.

FLOW, COMPRESSIBLE↗
NASA NTRS1985

Design and fabrication of the NASA decoupler pylon for the F-16 aircraft, addendum 1

The results of the final analyses which were conducted using a revised structural simulation of the Decoupler Pylon are reported in this addendum. The simulation incorporates the previously published results of ground tests performed on the flight Decoupler Pylons mounted in a test fixture at General Dynamic's Fort Worth facility. The analyses show that the Decoupler Pylon will suppress wing-store flutter for the GBU-8 flight test stores configuration on an F-16 airplane. The feasibility of carrying a B-61 on the pylons is also investigated with the conclusion that the pylons would need to be modified in order to demonstrate flutter suppression. The results of a ground vibration test performed on the 1/4 scale F-16 flutter model and a wind tunnel test with this model and a model Decoupler Pylon are given.

Clayton, J. D.↗
NASA NTRS1984

Four New Capabilities in NASTRAN for Dynamic and Aeroelastic Analyses of Rotating Cyclic Structures

Static aerothermoelastic design/analysis of axial-flow compressors, modal flutter analysis of axial-flow turbomachines, forced vibration analysis of rotating cyclic structures and modal flutter analysis of advanced turbopropellers with highly swept blades are four new capabilities developed and implemented in NASTRAN Level 17.7. The contents, applicability and usefulness of these capabilities which were developed and documented under the sponsorship of NASA's Lewis Research Center are discussed. Overall flowcharts and selected examples are presented.

Elchuri, V.↗
NASA NTRS1952

Investigation of the Structural Damping of a Full-scale Airplane Wing

An investigation to determine the structural damping characteristics of a full-scale airplane wing was conducted by the shock-excitation method wherein the wing was loaded to a predetermined deflection and the load suddenly released. The test specimen vibrated at its fundamental bending frequency of 1.69 cycles per second. Only the first 2 or 3 cycles showed any indication of a higher frequency being superimposed upon the fundamental bending frequency. The damping was found to increase from about 0.002 to critical at an amplitude of vibration of plus and minus 0.05 inch to approximately 0.006 of critical at an amplitude of + or - 5 inches.

LOADS AND STRESSES, STRUCTURAL - DYNAMIC↗
NASA NTRS1956

An Air-flow-direction Pickup Suitable for Telemetering Use on Pilotless Aircraft

A vane-type air-flow-direction pickup is described which is suitable for telemetering angle-of-attack and angle-of-sideslip data from rocket-propelled pilotless aircraft models. Test results which are presented show that the device performs well under high accelerations and is stable throughout a Mach number rage from subsonic to above a Mach number of 2.5.

INSTRUMENTS, FLIGHT↗
NASA NTRS1956

Equations and procedures for numerically calculating the aerodynamic characteristics of lifting rotors

Equations and procedures are presented for numerically determining the aerodynamic characteristics of lifting rotors. The equations are general and can account for stall and compressibility effects, as well as variations in hub and blade configurations, that are normally omitted from conventional analytical rotor treatments. The application of the method to solution by automatic computing machines is discussed.

LOADS - ROTATING WINGS↗
NASA NTRS1956

Determination of the structural damping coefficients of six full-scale helicopter rotor blades of different materials and methods of construction

Results of an experimental investigation of the structural damping of six full-scale helicopter rotor blades, made to determine the variation of structural damping with materials and methods of construction, are presented. The damping of the blades was determined for the first three flapwise bending modes, first chordwise bending mode, and first torsion mode. The contribution of structural damping to the total damping of the blades is discussed for several aerodynamic conditions in order to point out situations where structural damping is significant.

WINGS, ROTATING - EXPERIMENTAL STUDIES↗
NASA NTRS1957

Effect of transient heating on vibration frequencies of some simple wing structures

Thermal stresses, which may result from transient heating, can cause changes in the effective stiffness of wing structures. Some effects of this change in stiffness were investigated experimentally by radiantly heating three types of simple wing structures: a uniform plate, a solid double-wedge section, and a circular-arc multiweb-wing section. Changes in stiffness were determined by measuring the changes in natural frequency of vibration during transient heating. Some comparisons are made between theoretical calculations and the measured data.

LOADS AND STRESSES, STRUCTURAL↗
NASA NTRS1957

A wide-frequency-range air-jet shaker

This paper presents a description of a simple air-jet shaker. Its force can be calibrated statically and appears to be constant with frequency. It is relatively easy to use, and it has essentially massless characteristics. This shaker is applied to define the unstable branch of a frequency-response curve obtained for a nonlinear spring with a single degree of freedom.

VIBRATION AND FLUTTER↗
NASA NTRS1948

An Investigation of Aileron Oscillations at Transonic Speeds on NACA 23012 and NACA 65-212 Airfoils by the Wing-flow Method

An investigation is being conducted to determine the feasibility of studying aileron buzz by means of the wing-flow method. Two semispan models which had an aspect ratio of 6 and a taper ratio of 2 with quarter-chord half-span mass-balanced ailerons have been used. One had an NACA 23012 airfoil section and the second, an NACA 65-212 airfoil section. The ailerons on both models were subject to buzz over a small range of Mach number near 0.9. Data obtained by wing-flow testing agreed reasonably well with full-scale flight results.

MACH NUMBER EFFECTS - COMPLETE WINGS↗
NASA NTRS1952

Preliminary Investigation of Flow Fluctuations During Surge and Blade Row Stall in Axial-flow Compressors / c Merle C. Huppert

A preliminary investigation of the flow fluctuations of surge and blade row stall was conducted with three single-stage axial-flow compressors with hub-tip ratios of 0.9,0.8, and 0.5 and with a multistage axial-flow compressor. Flow fluctuations of large amplitude associated with stall were detected in all compressors investigated. The fluctuations were caused by low flow regions affecting 25 to 40 percent of the annulus area and propagating in the direction of compressor rotation, but at a lower speed. Mild audible surge was obtained with the single-stage compressors with hub-tip ratios of 0.9 and 0.8. No audible surge was detected with the 0.5 hub-tip ratio stage. A severe audible surge was obtained with the multistage axial-flow compressor. The surge point was coincident with the sharp drop in pressure ratio due to stall.

ENGINES, TURBO-JET↗
NASA NTRS1953

Results of Measurements of Maximum Lift and Buffeting Intensities Obtained During Flight Investigation of the Northrop X-4 Research Airplane

The variation of the intensity of buffeting experienced throughout the operational region of the semitailless Northrop X-4 airplane and the values of maximum and peak normal-force coefficients in the Mach number range from 0.42 to 0.92 have been determined. The results are compared with data obtained with the swept-wing Douglas D-558-II airplane.

FLYING QUALITIES↗
NASA NTRS1952

Analytical study of shimmy of airplane wheels

The problem of shimmy of a castering wheel, such as the nose wheel of a tricycle gear airplane, is treated analytically. The flexibility of the tire is considered to be the primary cause of shimmy. The rather simple theory developed agrees rather well with previous experimental results. The author suggests that shimmy may be eliminated through a suitable choice of landing gear dimensions in lieu of a damper.

LOADS, LANDING - GROUND-RUN↗
NASA NTRS1951

Present state of development in nonsteady motion of a lifting surface

a summary is given of the principal results on air forces for a wing undergoing unsteady motion in an incompressible fluid and of methods followed by various investigators, as of 1941. Part I contains results for a wing of infinite aspect ratio; part II deals with procedures for wings of finite aspect ratio; part III contains results for force components in the direction of motion (propulsion or drag); part IV considers the results of some experimental investigations. Each part contains an evaluation of existing publications.

SUMMARIES, TECHNICAL↗