Search NASA⌕ Search

SEARCH · Search NASA

Results for “VIBRATION MODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Response measurements for two building structures excited by noise from a large horizontal axis wind turbine generator

Window and wall acceleration measurements and interior noise measurements ere made for two different building structures during excitation by noise from the WTS-4 horizontal axis wind turbine generator operating in a normal power generation mode. With turbine noise input pulses resulted in acceleration pulses for the wall and window elements of the two tests buildings. Response spectra suggest that natural vibration modes of the structures are excited. Responses of a house trailer were substantially greater than those for a building of sturdier construction. Peak acceleration values correlate well with similar data for houses excited by flyover noise from commercial and military airplanes and helicopters, and sonic booms from supersonic aircraft. Interior noise spectra have peaks at frequencies corresponding to structural vibration modes and room standing waves; and the levels for particular frequencies and locations can be higher than the outside levels.

Hubbard, H. H.↗
NASA NTRS2003

Propulsion Health Monitoring for Enhanced Safety

This report presents the results of the NASA contract Propulsion System Health Management for Enhanced Safety performed by General Electric Aircraft Engines (GE AE), General Electric Global Research (GE GR), and Pennsylvania State University Applied Research Laboratory (PSU ARL) under the NASA Aviation Safety Program. This activity supports the overall goal of enhanced civil aviation safety through a reduction in the occurrence of safety-significant propulsion system malfunctions. Specific objectives are to develop and demonstrate vibration diagnostics techniques for the on-line detection of turbine rotor disk cracks, and model-based fault tolerant control techniques for the prevention and mitigation of in-flight engine shutdown, surge/stall, and flameout events. The disk crack detection work was performed by GE GR which focused on a radial-mode vibration monitoring technique, and PSU ARL which focused on a torsional-mode vibration monitoring technique. GE AE performed the Model-Based Fault Tolerant Control work which focused on the development of analytical techniques for detecting, isolating, and accommodating gas-path faults.

Butz, Mark G.↗
NASA NTRS1983

Vibration studies of a lightweight three-sided membrane suitable for space application

Vibration studies carried out in a vacuum chamber are reported for a three-sided membrane with inwardly curved edges. Uniform tension was transmitted by thin steel cables encased in the edges. Variation of ambient air pressure from atmospheric to near vacuum resulted in increased response frequencies and amplitudes. The first few vibration modes measured in a near vacuum are shown to be predictable by a finite element structural analysis over a range of applied tension loads. The complicated vibration mode behavior observed during tests at various air pressures is studied analytically with a nonstructural effective air-mass approximation. The membrane structure is a candidate for reflective surfaces in space antennas.

Sewell, J. L.↗
DOE OSTI2026

Ultranarrow bright single-photon emitters in diamond with strong broadband phonon decoupling

Single-photon emitters are fundamental building blocks for quantum information processing, communication and sensing. However, unwanted interactions with bulk phonons in their host environment strongly limit their coherence and controllability. We report single color centers in nanodiamonds that are strongly and comprehensively decoupled from the bulk phononic environment. The color centers feature record-narrow linewidths down to 0.3 nm at room temperature and stable, bright emission, exceeding 10 Mcps in saturation. Notably, the bulk phonon sideband is almost entirely suppressed, revealing the presence of a single localized vibrational mode outside the diamond phonon band. Our observations and simulations point towards a unique mechanism for phonon decoupling in common wide-gap materials, based on a strongly radiative orbital transition coupled to a localized vibrational mode. The new color center enables qualitatively higher performance for applications in quantum networks and nanoscale sensing, and the exploration of new physical resources associated with vibrational states.

Sahoo, Swetapadma [ORNL]↗
DOE OSTI2025

Raman spectroscopic investigation of UCl 4

Uranium chloride salts are a proposed fuel source for molten salt reactors (MSRs). However, despite their relevance to nuclear energy, they remain understudied, in part because of their air and moisture sensitivity. Here, this work provides the first Raman spectra of UCl 4 from 45 to 3200 cm −1 collected with 532 and 785 nm excitation sources as well as the assignment of 10 identified peaks to their respective vibrational modes. These Raman bands are compared to those for isostructural ThCl 4 , the compositionally related UCl 3 , and the computed Raman bands for UCl 4 from local vibrational mode analysis. The observed spectrum of UCl 4 is in accord with that of ThCl 4 and the computed spectra of UCl 4 . We posit that the observed differences between the spectra of UCl 4 and UCl 3 are useful in differentiating these species for applications such as in situ monitoring of MSR operations.

Anoxic spectroscopy↗
NASA NTRS1989

Using NASTRAN To Analyze Vibrations Of Rotor Blades

Report gives information on use of NASTRAN computer program in finite-element analysis of rotating flexible blades like in compressors and on turboprop engines. Predicts steady-state components of deflections and stresses under centrifugal forces, generates data for plots of natural frequency versus rotational speed, and provides vibration-mode data for calculations of flutter. Describes use of NASTRAN solution sequence 64 for geometrical nonlinear analysis and solution sequence 63 for determination of frequencies and vibrational-mode shapes. Includes sample problem with NASTRAN input data. Emphasizes key factors in analysis of rotating blades, such as setting angle and centrifugal softening effects. Combined analyses of solution sequences 64 and 63 reduces computer time and number of output listings, in comparison with separate analyses. In central-processing-unit time cut in half.

Lawrence, Charles↗
NASA NTRS2008

Vibration Analysis of the Space Shuttle External Tank Cable Tray Flight Data with and without PAL Ramp

External Tank Cable Tray vibration data for three successive Space Shuttle flights were analyzed to assess response to buffet and the effect of removal of the Protuberance Air Loads (PAL) ramp. Waveform integration, spectral analysis, cross-correlation analysis and wavelet analysis were employed to estimate vibration modes and temporal development of vibration motion from a sparse array of accelerometers and an on-board system that acquired 16 channels of data for approximately the first two minutes of each flight. The flight data indicated that PAL ramp removal had minimal effect on the fluctuating loads on the cable tray. The measured vibration frequencies and modes agreed well with predicted structural response.

Walker, B. E.↗
NASA NTRS2008

Vibration Analysis of the Space Shuttle External Tank Cable Tray Flight Data With and Without PAL Ramp

External Tank Cable Tray vibration data for three successive Space Shuttle flights were analyzed to assess response to buffet and the effect of removal of the Protuberance Air Loads (PAL) ramp. Waveform integration, spectral analysis, cross-correlation analysis and wavelet analysis were employed to estimate vibration modes and temporal development of vibration motion from a sparse array of accelerometers and an on-board system that acquired 16 channels of data for approximately the first 2 min of each flight. The flight data indicated that PAL ramp removal had minimal effect on the fluctuating loads on the cable tray. The measured vibration frequencies and modes agreed well with predicted structural response.

Walker, Bruce E.↗
NASA NTRS1948

Effect of Centrifugal Force on the Elastic Curve of a Vibrating Cantilever Beam

A study was made to determine the effect of rotation on the dynamic-stress distribution in vibrating cantilever beams. The results of a mathematical analysis are presented together with experimental results obtained by means of stroboscopic photographs and strain gages. The theoretical analysis was confined to uniform cantilever beams; the experimental work was extended to include a tapered cantilever beam to simulate an aircraft propeller blade. Calculations were made on nondimensional basis for second and third mode vibration; the experiments were conducted on beams of various lengths, materials, and cross sections for second-mode vibration. From this investigation it was concluded that high vibratory-stress positions are unaffected by the addition of centrifugal force. Nonrotating vibration surveys of blades therefore are valuable in predicting high vibratory-stress locations under operating conditions.

Simpkinson, Scott H↗
DOE OSTI2025

SnSe 1-x S x Alloys: Anisotropic Van der Waals Semiconductors with Tunable Bandgaps

Alloying is one of the main tools of bandgap engineering, allowing the tuning of crystal structure, lattice parameters, and electronic structure of 3D and 2D/layered semiconductors. Among the latter, it can play a key role in tailoring the properties of tin monochalcogenides, a class of van der Waals semiconductors of interest for optoelectronics, thermoelectrics, ferroelectrics, and valleytronics. Here, the study investigates the synthesis and properties of large flakes of the anion substitution alloys SnSe 1-x S x . Alloy flakes across a wide range of compositions are obtained systematically by repeated growth from the same mixed (SnS, SnSe) powder precursor. Combined experiment and theory show full miscibility for all compositions, along with tunable lattice constants, bandgaps, and vibrational modes. Atomic resolution imaging demonstrates the accumulation of S and Se in alternating layers in the SnSe 1-x S x unit cell, attributed to growth kinetics. Polarized Raman spectroscopy confirms anisotropic vibrational modes; the calculated and measured band structure shows systematic changes in the band edge energies and anisotropic electronic structure due to the anisotropic in-plane lattice of the monochalcogenides. Cathodoluminescence, finally, indicates that a unique configuration of two non-degenerate, direct valleys along orthogonal k-space directions persists all the way from SnS to SnSe, making SnSe 1-x S x alloys interesting for valleytronics.

36 MATERIALS SCIENCE↗
NASA NTRS1991

3.3 micron emission from ultraviolet excitation of some aromatic molecules

Infrared emissions are observed from photoexcitation of benzene, naphthalene, phenanthrene, anthracene, pyrene, and their methyl derivatives in the gas phase at 193 nm using an ArF laser as a light source. An emission band with peak at 3.3 microns is observed from all the molecules studied. This band is attributed to the aromatic C-H stretching vibrational modes. In addition to the 3.3-microns band, an emission band at 3.4-3.6 microns is observed from photoexcitation of the methyl derivatives, which is attributed to the C-H stretching vibrational modes of the CH3 group. The observed spectra are compared with the IR emission bands observed in many astronomical objects. The current laboratory data lend support to a model in which PAH molecules are responsible for the 'unidentified' interstellar IR emissions. IR emissions from the 193-nm excitation of several interstellar molecules other than PAHs are also observed, but they are quite different from the interstellar IR bands.

Shan, Jun↗
NASA NTRS1987

Distributed control using linear momentum exchange devices

MSFC has successfully employed the use of the Vibrational Control of Space Structures (VCOSS) Linear Momentum Exchange Devices (LMEDs), which was an outgrowth of the Air Force Wright Aeronautical Laboratory (AFWAL) program, in a distributed control experiment. The control experiment was conducted in MSFC's Ground Facility for Large Space Structures Control Verification (GF/LSSCV). The GF/LSSCV's test article was well suited for this experiment in that the LMED could be judiciously placed on the ASTROMAST. The LMED placements were such that vibrational mode information could be extracted from the accelerometers on the LMED. The LMED accelerometer information was processed by the control algorithms so that the LMED masses could be accelerated to produce forces which would dampen the vibrational modes of interest. Experimental results are presented showing the LMED's capabilities.

Sharkey, J. P.↗
DOE OSTI2024

Fine structure of current noise spectra in nanoelectromechanical resonators

Here, we study the frequency-dependent noise of a suspended carbon nanotube quantum dot nanoelectromechanical resonator induced by electron-vibration coupling. Using a rigorous Keldysh diagrammatic technique, we establish a formal framework connecting the vibrational properties to electrical measurements. We find that the noise power spectrum exhibits a narrow resonant peak at the frequency of the vibrational modes. However, this fine structure tends to disappear due to a coherent cancellation effect when the tunneling barriers are tuned to a symmetric point. Notably, measuring the electrical current noise spectra provides a sensitive alternative method for detecting the damping and dephasing of quantum vibrational modes.

Electric measurements↗
NASA NTRS1972

Level 12 NASTRAN experiences at General Dynamics, Convair Aerospace Division, Fort Worth Operations

The level 12 NASTRAN was used to support the NASA/LaRC advanced transport technology study, a predesign, short response time effort. Aeroelastic analyses were performed. NASTRAN calculated the vibration modes for the supported airfoil components and the entire unsupported vehicle. Other procedures were then used for the aeroelastic analysis, with procedure interfacing accomplished through use of the NASTRAN-produced restart tape. Stiffness matrices were used in static aeroelastic analyses; natural vibration modes were used for flutter and flight control system definition. Various level 12 NASTRAN characteristics were discovered and are discussed; e.g., the ability to solve singular matrices in rigid format 1, run times using multipoint constraints, restart tape problems, and the inaccurate stresses from the quad membrane when used with anisotropic materials.

Allen, M.↗
DOE OSTI2025

Delineating the Effects of Counterions on the Structural and Vibrational Properties of U(IV) Lindqvist Polyoxometalate Complexes

Herein we conducted a full investigation into the fundamental structural and vibrational properties of uranium(IV) Peacock−Weakley-type lacunary Lindqvist (W 10 ) polyoxometalate (POM) complexes. We recently demonstrated the importance of the secondary lattice elements in tuning the distortion of the D 4d symmetry in W 10 POM complexes, and here, we synthesized eight UW 10 complexes with different alkali metal counterions and evaluated how the composition and packing of counterion species affected complex structural and vibrational properties. Single-crystal X-ray diffraction analysis on complexes 1−8 revealed changes in structural distortion parameters as a function of differences in counterion configurations, while far-infrared and Raman spectra for 1−8 also demonstrated that vibrational mode frequencies were sensitive to changes in counterion composition and packing. To more effectively compare different counterion configurations, we developed counterion effective ionic radius (eIR) as a new structural parameter, and comparisons between structural distortion parameters and eIR values strongly suggested that modulation by the secondary lattice elements can affect structural and vibrational manifolds within POM complexes. Partial least squares (PLS) analysis was used to quantitatively evaluate correlations observed within this investigation, and PLS statistical models showed a strong correlation between counterion eIR and both structural distortion parameters and vibrational mode frequencies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2001

Hydrogenation of polycyclic aromatic hydrocarbons as a factor affecting the cosmic 6.2 micron emission band

While many of the characteristics of the cosmic unidentified infrared (UIR) emission bands observed for interstellar and circumstellar sources within the Milky Way and other galaxies, can be best attributed to vibrational modes of the variants of the molecular family known as polycyclic aromatic hydrocarbons (PAH), there are open questions that need to be resolved. Among them is the observed strength of the 6.2 micron (1600 cm(-1)) band relative to other strong bands, and the generally low strength for measurements in the laboratory of the 1600 cm(-1) skeletal vibration band of many specific neutral PAH molecules. Also, experiments involving laser excitation of some gas phase neutral PAH species while producing long lifetime state emission in the 3.3 micron (3000 cm(-1)) spectral region, do not result in significant 6.2 micron (1600 cm(-1)) emission. A potentially important variant of the neutral PAH species, namely hydrogenated-PAH (H(N)-PAH) which exhibit intriguing spectral correlation with interstellar and circumstellar infrared emission and the 2175 A extinction feature, may be a factor affecting the strength of 6.2 micron emission. These species are hybrids of aromatic and cycloalkane structures. Laboratory infrared absorption spectroscopy augmented by density function theory (DFT) computations of selected partially hydrogenated-PAH molecules, demonstrates enhanced 6.2 micron (1600 cm(-1)) region skeletal vibration mode strength for these molecules relative to the normal PAH form. This along with other factors such as ionization or the incorporation of nitrogen or oxygen atoms could be a reason for the strength of the cosmic 6.2 micron (1600 cm(-1)) feature.

Cosmic Dust/analysis↗
NASA NTRS1975

In-flight damping measurement

A new testing technique is described which can be applied in determining the damping coefficient of the critical vibration modes of an airplane in flight. The damping coefficient can be determined in several different ways from the same data using different features of a modified response curve which implies the possibility of checking one value against the other. The method introduces the effect of sweep rate in the driving system. This effect on the frequency response curve of the critical vibration mode and its various characteristics are used in the determination of damping coefficient. A theoretical examination is made of these characteristics for single degree of freedom systems.

Sanderson, G. E.↗