Search NASA⌕ Search

SEARCH · Search NASA

Results for “VISCOUS DRAG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Diurnal variations in the thermosphere. I - Theoretical formulation

A nonlinear perturbation theory is formulated for the solution of the multicomponent equations of energy, mass, and momentum conservation in the atmosphere. The theory is three-dimensional and includes the effects of heat conduction and advection, viscosity, ion drag, and diffusion. The theory is described as a superposition of mathematical modes obtained by expanding the physical quantities into vector and spherical harmonics. The coupling between the various modes, both linear and nonlinear, is included. The theory provides a basis for the treatment of the thermosphere and its interaction with the lower atmosphere, where 'mode coupling' is most important. As an example, a comparison is presented between one-dimensional and three-dimensional calculations of the fundamental mode of the diurnal component in the thermosphere. Coupling between the lowest modes is considered to describe the physical conditions of the lower thermosphere where inertia and Coriolis forces become dominant over the ion-drag and viscous forces. In this region, the latitude structures of the temperature, wind field, and diffusively controlled oxygen are shown to change significantly.

Harris, I.↗
NASA NTRS1988

Computational fluid dynamics drag prediction: Results from the Viscous Transonic Airfoil Workshop

Results from the Viscous Transonic Airfoil Workshop are compared with each other and with experimental data. Test cases used include attached and separated transonic flows for the NACA 0012 airfoil. A total of 23 sets of numerical results from 15 different author groups are included. The numerical method used vary widely and include: 16 Navier-Stokes methods, 2 Euler boundary layer methods, and 5 potential boundary layer methods. The results indicate a high degree of sophistication among the numerical methods with generally good agreement between the various computed and experimental results for attached or moderately separated cases. The agreement for cases with larger separation is only fair and suggests additional work is required in this area.

Holst, Terry L.↗
NASA NTRS1988

Non-contaminating method to reduce Marangoni convection in microgravity float zones

A ground-based experiment has validated the effectiveness of a noncontaminating method developed to reduce Marangoni (thermal capillary) convection in float-zone processing of corrosive materials in space microgravity. A drop of silicone oil 1.5 mm high was enclosed in a transparent box, and the small size of the drop was shown to suppress the 1-g thermal-buoyant convection. A vertical jet of air was blown tangentially over a vertical free surface, producing a viscous shear drag which opposes the Marangoni surface shear. A 66 percent reduction in Marangoni velocities was found in the lowest one-third of the drop, corresponding to the resolidification surface in a float-zone melt.

Dressler, R. F.↗
NASA NTRS1989

Computational fluid dynamics drag prediction: Results from the Viscous Transonic Airfoil Workshop

Results from the Viscous Transonic Airfoil Workshop held in January 1987, are compared with each other and with experimental data. Test cases used include attached and separated transonic flows for the NACA 0012 airfoil. A total of 23 sets of numerical results from 15 different author groups are included. The numerical methods used vary widely and include: 16 Navier-Stokes methods, 2 Euler/boundary-layer methods, and 5 potential/boundary-layer methods. The results indicate a high degree of sophistication among the numerical methods with generally good agreement between the various computed and experimental results for attached or moderately separated cases. The agreement for cases with larger separation is only fair and suggests additional work is required in this area.

Holst, Terry L.↗
NASA NTRS2005

Application of Parallel Adjoint-Based Error Estimation and Anisotropic Grid Adaptation for Three-Dimensional Aerospace Configurations

This paper demonstrates the extension of error estimation and adaptation methods to parallel computations enabling larger, more realistic aerospace applications and the quantification of discretization errors for complex 3-D solutions. Results were shown for an inviscid sonic-boom prediction about a double-cone configuration and a wing/body segmented leading edge (SLE) configuration where the output function of the adjoint was pressure integrated over a part of the cylinder in the near field. After multiple cycles of error estimation and surface/field adaptation, a significant improvement in the inviscid solution for the sonic boom signature of the double cone was observed. Although the double-cone adaptation was initiated from a very coarse mesh, the near-field pressure signature from the final adapted mesh compared very well with the wind-tunnel data which illustrates that the adjoint-based error estimation and adaptation process requires no a priori refinement of the mesh. Similarly, the near-field pressure signature for the SLE wing/body sonic boom configuration showed a significant improvement from the initial coarse mesh to the final adapted mesh in comparison with the wind tunnel results. Error estimation and field adaptation results were also presented for the viscous transonic drag prediction of the DLR-F6 wing/body configuration, and results were compared to a series of globally refined meshes. Two of these globally refined meshes were used as a starting point for the error estimation and field-adaptation process where the output function for the adjoint was the total drag. The field-adapted results showed an improvement in the prediction of the drag in comparison with the finest globally refined mesh and a reduction in the estimate of the remaining drag error. The adjoint-based adaptation parameter showed a need for increased resolution in the surface of the wing/body as well as a need for wake resolution downstream of the fuselage and wing trailing edge in order to achieve the requested drag tolerance. Although further adaptation was required to meet the requested tolerance, no further cycles were computed in order to avoid large discrepancies between the surface mesh spacing and the refined field spacing.

Lee-Rausch, E. M.↗
NASA NTRS2018

Convergence Analysis of Turbulent Flow Solutions

Data from the "Turbulence Modeling Resource" website for turbulent flow over an NACA-0012 airfoil is analyzed to determine the convergence behavior of three second-order CFD (Computational Fluid Dynamics) codes: CFL3D (Computational Fluids Lab 3 Dimensional flow solver), FUN3D (Fully Unstructured Navier-stokes flow solver), and TAU (German Aerospace Center (DLR) 2 dimensional code for unstructured hybrid grids solving the Reynolds-Averaged Navier-Stokes equations or the Euler equations). The convergence of both integrated properties and pointwise data are examined. Several different methods for estimating errors and computing convergence rates are compared. A high-order extension to the Richardson extrapolation is developed that improves the accuracy of the mesh limit values and provides a quantitative estimate of the threshold of the asymptotic regime. The coefficient of total drag exhibits second-order convergence for all three codes, and convergence is monotone over a sequence of 7 grids. Other force coefficients are not so well behaved. The convergence rates of the viscous component of drag on the three nest grids ranges from 3:0 for CFL3D to 1:0 for FUN3D. The three codes are converging to similar but not identical solutions. The largest differences between the codes are in the coefficient of lift for which the difference between CFL3D and FUN3D is greater than 10 (sup minus 4). The best agreement occurs in the viscous component of drag, which is the only force component for which all three codes are converging towards each other at a rate of second-order. The agreement between the two unstructured grid codes is good with all properties except lift converging towards common values at a rate of second-order. No one code was universally better than the other. The TAU code has the lowest error in total drag, FUN3D has the lowest error in lift, and CFL3D has the lowest error in the viscous component of drag.

Atkins, Harold L.↗
NASA NTRS1999

Reduction of Base Drag on Launch Vehicles

This report describes the work accomplished during a first-year investigation of base drag reduction for launch vehicles. Interest in this work has arisen due to the large base areas associated with the current generation of launch vehicles. For example, the X-33 and Venture Star configurations all have large base areas because of the aero-spike engines they use. Because of the large base-to-wetted area ratios of these vehicles, the majority of the vehicle drag is due to base drag. Based on previous research, there appears to be a means for reducing the base drag on such vehicles. A clear relationship between viscous fore-body drag and base drag was demonstrated. For subsonic flow conditions, an increase in fore-body drag causes a decrease in base drag. This base-drag reduction is a result of boundary layer effects at the base of the vehicle. The shear layer that develops from the boundary layer separating at the back of the vehicle is the conduit through which momentum is transferred from the high energy free-stream flow to the low-energy fluid in the base area. One way to think of the base drag is that it is the momentum required to accelerate this low-energy fluid. The boundary layer that develops on the fore body acts as an "insulator" between the external flow and the low-energy air at the base. As the viscous fore-body drag is increased, the boundary layer thickness at the aft end of the fore body increases, thereby reducing the rate at which momentum is transferred to the base area. As a result of the lower momentum transfer (or reduced pumping), the base pressure coefficient rises resulting in a reduction of base drag.

Naughton, Jonathan↗
NASA NTRS1997

An Efficient Multiblock Method for Aerodynamic Analysis and Design on Distributed Memory Systems

The work presented in this paper describes the application of a multiblock gridding strategy to the solution of aerodynamic design optimization problems involving complex configurations. The design process is parallelized using the MPI (Message Passing Interface) Standard such that it can be efficiently run on a variety of distributed memory systems ranging from traditional parallel computers to networks of workstations. Substantial improvements to the parallel performance of the baseline method are presented, with particular attention to their impact on the scalability of the program as a function of the mesh size. Drag minimization calculations at a fixed coefficient of lift are presented for a business jet configuration that includes the wing, body, pylon, aft-mounted nacelle, and vertical and horizontal tails. An aerodynamic design optimization is performed with both the Euler and Reynolds Averaged Navier-Stokes (RANS) equations governing the flow solution and the results are compared. These sample calculations establish the feasibility of efficient aerodynamic optimization of complete aircraft configurations using the RANS equations as the flow model. There still exists, however, the need for detailed studies of the importance of a true viscous adjoint method which holds the promise of tackling the minimization of not only the wave and induced components of drag, but also the viscous drag.

Reuther, James↗
NASA NTRS1984

Turbulent flow in a channel with a wall with progressive waves

The effects of prescribed wall motion on turbulent channel flow were examined with the objective of understanding the drag mechanisms and obtaining a possible means for drag reduction. A computer program for large-eddy simulation (LES) of turbulent flow in a channel was adapted to treat the case of time-varying wall motion using linearized boundary conditions. The code was applied to flow in a channel with prescribed wall motion on one wall. It was found that the results can be explained by a model based on a Stokes-like layer near the moving wall. This provides a theory which can be used to guide the selection of parameters. Considering both viscous and pressure drag components, it was found that net drag reduction is possible under certain conditions of wall motion. However, the work required to drive the wall motion can be greater than the reduced through-flow energy requirement. The major effects of the wall motion are restricted to the viscous sublayer of the turbulent flow.

Kuhn, G. D.↗
NASA NTRS1980

Transonic Flow Field Analysis for Wing-Fuselage Configurations

A computational method for simulating the aerodynamics of wing-fuselage configurations at transonic speeds is developed. The finite difference scheme is characterized by a multiple embedded mesh system coupled with a modified or extended small disturbance flow equation. This approach permits a high degree of computational resolution in addition to coordinate system flexibility for treating complex realistic aircraft shapes. To augment the analysis method and permit applications to a wide range of practical engineering design problems, an arbitrary fuselage geometry modeling system is incorporated as well as methodology for computing wing viscous effects. Configuration drag is broken down into its friction, wave, and lift induced components. Typical computed results for isolated bodies, isolated wings, and wing-body combinations are presented. The results are correlated with experimental data. A computer code which employs this methodology is described.

Boppe, C. W.↗
NASA NTRS1981

Ion-neutral momentum coupling near discrete high-latitude ionospheric features

A two-dimensional numerical model is developed to study the momentum coupling between the ionosphere and neutral atmosphere in the vicinity of discrete high-latitude features, such as convection channels and plasma density troughs. Based on generalized magnetohydrodynamic equations the model takes account of global pressure gradients, viscous dissipation, ion drag, the Coriolis force, and electrodynamic drifts. Among the findings of an initial steady state investigation are the following: (1) in convection channels, significant shears and rotations of the thermospheric flow can occur below 200 km if a minimum in the electron density profile is present between the E and F regions; (2) in convection channels, the thermospheric wind decreases with height in the F region owing to the effects of horizontal viscosity; and (3) at low altitudes, the boundaries of convection channels may produce Ekman spirals.

St-Maurice, J.-P.↗
NASA NTRS1984

The origin and evolution of planetary rings

Roche (1847) suggested that Saturn's rings may be the fragments of a disrupted satellite rather than the uncoagulated remnant of a circumplanetary disk from which the regular satellites formed. In order to address this unresolved central issue, attention is given to the dynamical processes of viscous spreading, gas drag, particulate coagulation, and the effect of further matter infall from heliocentric orbit onto the planet/disk, all of which act on a gas/solid disk in Keplerian motion. In view of these considerations, it is suggested that rings were created by the disruption of large satellites which were less sensitive to the destructive processes present during the planet's formation. This hypothesis explains the presence of shepherd satellites, such as large collision fragments, which coexist in the same orbital range as the ring particles.

Harris, A. W.↗
NASA NTRS2017

Baseline Experimental Results on the Effect of Oil Temperature on Shrouded Meshed Spur Gear Windage Power Loss

Rotorcraft gearbox efficiencies are reduced at increased surface speeds due to viscous and impingement drag on the gear teeth. This windage power loss can affect overall mission range, payload, and frequency of transmission maintenance. Experimental and analytical studies on shrouding for single gears have shown it be potentially effective in mitigating windage power loss. Efficiency studies on unshrouded meshed gears have shown the effect of speed, oil viscosity, temperature, load, lubrication scheme, etc. on gear windage power loss. The open literature does not cite data on shrouded meshed spur gears. Gear windage power loss test results are presented on shrouded meshed spur gears at elevated oil inlet temperatures and constant oil pressure both with and without shrouding. Shroud effectiveness is compared at four oil inlet temperatures. The results are compared to the available literature and follow-up work is outlined.

windage↗
NASA NTRS2017

Baseline Experimental Results on the Effect of Oil Temperature on Shrouded Meshed Spur Gear Windage Power Loss

Rotorcraft gearbox efficiencies are reduced at increased surface speeds due to viscous and impingement drag on the gear teeth. This windage power loss can affect overall mission range, payload, and frequency of transmission maintenance. Experimental and analytical studies on shrouding for single gears have shown it to be potentially effective in mitigating windage power loss. Efficiency studies on unshrouded meshed gears have shown the effect of speed, oil viscosity, temperature, load, lubrication scheme, etc. on gear windage power loss. The open literature does not contain experimental test data on shrouded meshed spur gears. Gear windage power loss test results are presented on shrouded meshed spur gears at elevated oil inlet temperatures and constant oil pressure both with and without shrouding. Shroud effectiveness is compared at four oil inlet temperatures. The results are compared to the available literature and follow-up work is outlined.

gear↗