Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vacuum energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Optimizing Neutrino Flavor Conversion Measurements through Machine Learning

The phenomenon of neutrino flavor conversion whereby the flavor of a neutrino particle can change between its time of production and later detection was the first definitive evidence of physics beyond the Standard Model. Some of the oscillation parameters used to describe this conversion are not yet well measured, leaving important questions still open regarding flavor conversion both in vacuum and as neutrinos travel through matter. NOvA is a long-baseline neutrino oscillation experiment that uses Fermilab's predominantly $\nu_\mu$ NuMI beam. A 14 kton oil-based liquid scintillator far detector 810 km away is used to measure neutrino oscillation through the $\nu_\mu$ disappearance and $\nu_e$ appearance channels. Super-K is a 50 kton water Cherenkov detector, which measures the disappearance of $\nu_e$ produced during solar fusion. The high density environment of the sun decreases the $\nu_e$ survival probability at higher energies observable in Super-K compared to the vacuum-dominated oscillations at lower energies. However, the transition region is overshadowed by radioactive background in the detector. In both of these experiments, the separation of neutrino detection events from background and classification of neutrino flavor are crucial tasks that benefit from the introduction of machine learning. Chapter 1 gives an overview of neutrinos and the context under which flavor conversion is measured in this dissertation. Chapters 2-7 present the results of a Bayesian sampling approach for the latest NOvA 3-flavor oscillation analysis with $26.6 \times 10^{20}$ protons on target in neutrino mode and $12.5 \times 10^{20}$ in antineutrino mode collected over 10 years. Chapters 8-13 present the results of extending the Super-K solar analysis to lower energies during its fourth phase with 2970 days of livetime.

Yankelevich, Alejandro Jaime [UC, Irvine]↗
DOE OSTI2026

Optimizing Neutrino Flavor Conversion Measurements through Machine Learning

The phenomenon of neutrino flavor conversion whereby the flavor of a neutrino particle can change between its time of production and later detection was the first definitive evidence of physics beyond the Standard Model. Some of the oscillation parameters used to describe this conversion are not yet well measured, leaving important questions still open regarding flavor conversion both in vacuum and as neutrinos travel through matter. NOvA is a long-baseline neutrino oscillation experiment that uses Fermilab's predominantly $\nu_\mu$ NuMI beam. A 14 kton oil-based liquid scintillator far detector 810 km away is used to measure neutrino oscillation through the $\nu_\mu$ disappearance and $\nu_e$ appearance channels. Super-K is a 50 kton water Cherenkov detector, which measures the disappearance of $\nu_e$ produced during solar fusion. The high density environment of the sun decreases the $\nu_e$ survival probability at higher energies observable in Super-K compared to the vacuum-dominated oscillations at lower energies. However, the transition region is overshadowed by radioactive background in the detector. In both of these experiments, the separation of neutrino detection events from background and classification of neutrino flavor are crucial tasks that benefit from the introduction of machine learning. Chapter 1 gives an overview of neutrinos and the context under which flavor conversion is measured in this dissertation. Chapters 2-7 present the results of a Bayesian sampling approach for the latest NOvA 3-flavor oscillation analysis with $26.6 \times 10^{20}$ protons on target in neutrino mode and $12.5 \times 10^{20}$ in antineutrino mode collected over 10 years. Chapters 8-13 present the results of extending the Super-K solar analysis to lower energies during its fourth phase with 2970 days of livetime.

Yankelevich, Alejandro Jaime [UC, Irvine] (ORCID:0↗
DOE OSTI2022

Reduced defect recovery in self-ion damaged W due to simultaneous deuterium exposure during annealing

Deuterium (D) plasma exposure during annealing of self-ion damaged tungsten (W) is shown to exhibit reduced defect recovery when compared to annealing without D plasma exposure. In these experiments, samples were first damaged with 20 MeV W ions. Next, samples were annealed either with or without simultaneous D 2 plasma exposure. The simultaneous annealed samples were first decorated by D 2 plasma at 383 K prior to ramping up to an annealing temperature of 473, 573, 673, or 773 K and held for 1 h with concurrent plasma exposure. The vacuum annealed samples each had a corresponding temperature history but without D 2 plasma treatment. Finally, all samples were exposed to D 2 plasma at 383 K to decorate any remaining defects. Nuclear reaction analysis and thermal desorption spectroscopy (TDS) shows that the simultaneous plasma-exposed and annealed samples exhibited virtually no defect recovery at annealing temperatures of up to 673 K, and had higher D retention than found in the vacuum annealed samples. TDS results indicate that only the lowest detrapping energy defects recover at an 773 K anneal for the simultaneous plasma annealed samples, while the vacuum annealed samples showed defect recovery at all anneal temperatures. Furthermore, this experiment clearly demonstrates that D occupied defects can significantly reduce or eliminate defect annealing in W, and is consistent with the existence of synergistic plasma exposure/displacement damage effects in fusion-energy relevant plasma facing materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Solvent-Free Manufacturing of Lithium-Ion Battery Electrodes via Cold Plasma

Slurry casting has been used to fabricate lithium-ion battery electrodes for decades, which involves toxic and expensive organic solvents followed by high-cost vacuum drying and electrode calendering. This work presents a new manufacturing method using a nonthermal plasma to create inter-particle binding without using any polymeric binding materials, enabling solvent-free manufacturing electrodes with any electrochemistry of choice. The cold-plasma-coating technique enables fabricating electrodes with thickness (>200 μm), high mass loading (>30 mg cm -2 ), high peel strength, and the ability to print lithium-ion batteries in an arbitrary geometry. This crosscutting, chemistry agnostic, platform technology would increase energy density, eliminate the use of solvents, vacuum drying, and calendering processes during production, and reduce manufacturing cost for current and future cell designs. Here, lithium iron phosphate and lithium cobalt oxide were used as examples to demonstrate the efficacy of the cold-plasma-coating technique. It is found that the mechanical peel strength of cold-plasma-coating-manufactured lithium iron phosphate is over an order of magnitude higher than that of slurry-casted lithium iron phosphate electrodes. Full cells assembled with a graphite anode and the cold-plasma-coating-lithium iron phosphate cathode offer highly reversible cycling performance with a capacity retention of 81.6% over 500 cycles. For the highly conductive cathode material lithium cobalt oxide, an areal capacity of 4.2 mAh cm -2 at 0.2 C is attained. We anticipate that this new, highly scalable manufacturing technique will redefine global lithium-ion battery manufacturing providing significantly reduced plant footprints and material costs.

25 ENERGY STORAGE↗
DOE OSTI2026

Measuring spin correlation between quarks during QCD confinement

The vacuum is now understood to have a rich and complex structure, characterized by fluctuating energy fields and a condensate of virtual quark–antiquark pairs. The spontaneous breaking of the approximate chiral symmetry, signalled by the nonvanishing quark condensate $\langle$$q\bar{q}$$\rangle$, is dynamically generated through topologically nontrivial gauge configurations such as instantons. The precise mechanism linking the chiral symmetry breaking to the mass generation associated with quark confinement remains a profound open question in quantum chromodynamics (QCD)—the fundamental theory of strong interaction. High-energy proton–proton collisions could liberate virtual quark–antiquark pairs from the vacuum that subsequently undergo confinement to form hadrons, whose properties could serve as probes into QCD confinement and the quark condensate. Here we report evidence of spin correlations in $Λ\bar{Λ}$ hyperon pairs inherited from spin-correlated strange quark–antiquark virtual pairs. Measurements by the STAR experiment at the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory reveal a relative polarization signal of (18 ± 4)% that links the virtual spin-correlated quark pairs from the QCD vacuum to their final-state hadron counterparts. Crucially, this correlation vanishes when the hyperon pairs are widely separated in angle, consistent with the decoherence of the quantum system. Our findings provide a new experimental model for exploring the dynamics and interplay of quark confinement and entanglement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Quarkonium Spectroscopy in the Quark-Gluon Plasma

The properties of bound states are fundamental to hadronic spectroscopy and play a central role in the transition from hadronic matter to a quark-gluon plasma (QGP). In a strongly coupled QGP (sQGP), the interplay of temperature, binding energy, and large collisional widths of the partons poses formidable challenges in evaluating the in-medium properties of hadronic states and their eventual melting. In particular, the existence of heavy quarkonia in the QGP is a long-standing problem that is hard to solve by considering their spectral properties on the real-energy axis. Here, we address this problem by analyzing in-medium thermodynamic quarkonium 𝑇 matrices in the complex energy plane. We first validate this method in vacuum, where the 𝑇-matrix poles of observed states are readily identified. When deploying this approach to recent self-consistently calculated 𝑇 matrices in the QGP, we find that poles in the complex energy plane can persist to surprisingly large temperatures, depending on the strength of the in-medium interactions. While the masses and widths of the pole positions are precisely defined, the notion of a binding energy is not due to the absence of thresholds caused by the (large) widths of the underlying quark or anti-quark spectral functions. Our method thus provides a new and definitive quantum-mechanical criterion to determine the melting temperature of hadronic states in the sQGP while increasing the accuracy in the theoretical determination of transport parameters.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Enhanced negative energy with a massless Dirac field

Motivated by traversable wormhole constructions that require large amounts of negative energy, we explore constraints on the amount of negative energy that can be carried by a free Dirac field in a slab-shaped region between two parallel spatial planes. Specifically, we ask what is the minimum possible uniform energy density that can exist at some time, considering all possible states and all possibilities for the physics outside the slab. The vacuum state where we identify the two sides of the slab with antiperiodic boundary conditions gives one possible state with uniform negative energy, but we argue that states with more negative energy exist above 1+1 dimensions. Technically, we reduce the problem to studying a massive Dirac field on an interval in 1+1 dimensions and numerically search for states with uniform energy density in a lattice regulated model. We succeed in finding states with enhanced negative energy (relative to the antiperiodic vacuum) which also appear to have a sensible continuum limit. Our results for the mass-dependence of the minimum uniform energy density in 1+1 dimensions suggest that for a 3+1 dimensional massless Dirac fermion, it is possible to have states with arbitrarily large uniform negative energy density in an arbitrarily wide slab.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Gradient Amine Sorbents for Low Vacuum Swing CO 2 Capture at Ambient Temperature

The growing concerns over CO 2 emissions have led to the development of various methods for CO 2 capture. CO 2 capture by amine-based sorbents has been achieved by temperature (thermal) swing adsorption (TSA) process, pressure swing adsorption (PSA) process, and temperature pressure or vacuuming swing adsorption (TPSA or TVSA) process for CO 2 capture. Amine sorbents for energy-efficient TSA, PSA, VSA, TPSA or TVSA CO 2 capture should possess a capability which allow adsorbed CO 2 to desorb and amine sorbent to be regenerated at low temperatures or low vacuums. Development of such amine sorbents would significantly decrease energy consumption and sorbent degradation during the regeneration step. The objective of this project is to develop a low vacuum swing adsorption (VSA) process for the capture of CO 2 from air. The focus is on the development of amine sorbent which allows CO 2 to adsorb in the form of weakly adsorbed CO 2 . The weakly adsorbed CO 2 species can be collected from the sorbent by applying a low vacuum at ambient temperature. Specifically, no heating (i.e., thermal energy) is needed for regeneration of amine sorbents. This novel sorbent allows VSA to be operated at ambient temperature without a significant energy demand. This process eliminates the energy-intensive heating and cooling process in temperature swing adsorption (TSA) process. Ambient temperature operation could prolong the lifetime of sorbent and minimize the maintenance cost. Extensive sorbent studies with in-situ infrared spectroscopy have revealed the modifications of conventional amine sorbents with additives can increase the fraction of weakly adsorbed CO 2 . The amine sorbents with loaded CO 2 can be regenerated in part by the following approaches: (i) mild heating to temperatures below 70 °C, (ii) flowing purging gas over modified amine sorbents at temperatures below 40 °C, (iii) vacuuming at pressure below 0.2 atm and temperatures below 40 °C. The performance of these modified amine sorbents has been tested in a 60 grams VSA unit at ambient temperatures. The results show that weakly adsorbed CO 2 which can be desorbed from modified amine sorbents with purging gas at 100 cc/min can also be evacuated at a vacuum of 1 psia at room temperature. A preliminary techno- economic analysis indicates the major cost of the VSA process with modified amine sorbents stems from the operation of vacuum pumps. Thus, developing an excellent sealing with minimum leakage for the VSA unit is the most critical task for further the development of this VSA technology.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dynamical dark energy from lattice quantum gravity

We study the behavior of the vacuum in Euclidean dynamical triangulations (EDT). Algorithmic improvements and better lattice spacing determinations allow us to test the properties of the emergent de Sitter geometries of our simulations to higher precision than previously possible. Although the agreement with de Sitter is good, the improved precision reveals deviations that can be interpreted as nontrivial vacuum dynamics, well described by a cosmological constant that runs with scale. The simulations show that the dominant running is quadratic and that the scale can be identified with the Hubble rate. Several key cross-checks support this picture, including consistent results across multiple lattice spacings and the fact that the null energy condition is not violated. The parameters of the running are fully determined by simulations, enabling predictions when extrapolated to the scales relevant for our Universe. This leads to a model for dark energy that is compatible with current observations, but which predicts deviations from the Standard Model of cosmology at the 𝒪⁡(10 −3 ) level in observables that could be tested with future improvements in precision measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Study of Alfvén eigenmode stability in Quasi-Poloidal Stellarator (QPS) plasma using a Landau closure model

The aim of this study is to analyze the linear stability of Alfvén eigenmodes (AE) in the QPS device heated by a tangential neutral beam injector (NBI). The analysis is performed using the gyro-fluid code FAR3d, that solves the reduced MHD equations for the thermal plasma coupled with moments of the kinetic equation for the energetic particles (EP). The AE stability is calculated in several operational regimes of the tangential NBI: EP β between 0.001 and 0.1, EP energy between 12 and 180 keV and different radial locations of the beam. The analysis is performed for vacuum and finite β equilibria as well as QPS configurations with two and three periods. The EP β threshold in the vacuum case is 0.001 and the AE frequency is lower as the energy of the EP population decreases. Toroidal Alfvén eigenmodes with f = 80–120 kHz and elliptical AE between f = 120–350 kHz are triggered between the middle-outer plasma region ($r/a \gt 0.5$). The AE stability improves in the simulations with finite β equilibria and three period configurations with respect to the vacuum case with two periods because the continuum gaps are slender, leading to a higher threshold of the EP β, above 0.03 for the AEs triggered by the helical mode families. Helical effects are not strong enough to destabilize Helical Alfvén eigenmodes, the AEs with the largest growth rates are triggered by the n = 1 and n = 2 toroidal families.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Microstrata

Abstract Microstrata are the non-extremal analogues of superstrata: they are smooth, non-extremal (non-BPS) solitonic solutions to IIB supergravity whose deep-throat limits approximate black holes. Using perturbation theory and numerical methods, we construct families of solutions using a consistent truncation to three-dimensional supergravity. The most general families presented here involve two continuous parameters, or amplitudes, and four quantized parameters that set the angular momenta and energy levels. Our solutions are asymptotic to the vacuum of the D1-D5 system: AdS 3 ×S 3 × 𝕋 4 . Using holography, we show that the they are dual to multi-particle states in the D1-D5 CFT involving a large number of mutually non-BPS supergravitons and we determine the anomalous dimensions of these states from the binding energies in supergravity. These binding energies are uniformly negative and depend non-linearly on the amplitudes of the states. In one family of solutions, smoothness restricts some of the fields to lie on a special locus of the parameter space. Using precision holography we show that this special locus can be identified with the multi-particle states constructed via the standard OPE of the single-particle constituents. Our numerical analysis shows that microstrata are robust at large amplitudes and the solutions can be obtained to very high precision.

Physics↗
DOE OSTI2026

Controllable Formation of Threefold-Coordinated Oxygen in Graphene by Low-Energy Ion Implantation

The atomically precise engineering of impurities in graphene and the understanding of their structural and carrier-dependent electronic properties at the nanoscale are crucial for advancing graphene-based nanoelectronics, catalysis, and energy technologies. Here, we demonstrate controllable incorporation of the elusive 3-fold-coordinated O substitutions into graphene using low-energy O + ion implantation under ultrahigh-vacuum conditions. By combining high-resolution scanning tunneling microscopy and spectroscopy (STM/S), bond-resolved noncontact atomic force microscopy techniques, and density functional theory (DFT) calculations, we resolve both the structural and electronic properties of the O-related defects. The STM/S measurements, corroborated by DFT calculations, uncover a characteristic impurity state that is energetically pinned to the Dirac point across different charge-carrier doping regimes. Molecular dynamics simulations further reveal the distribution of implantation-induced configurations and identify the formation of 3-fold-coordinated O dopants. Furthermore, this work provides a viable route to incorporate 3-fold-coordinated O dopants and opens new opportunities for controlled defect engineering in graphene.

3-fold-coordinated oxygen↗
DOE OSTI2025

Computational toolkit for predicting thickness of 2D materials using machine learning and autogenerated dataset by large language model

The thickness of 2D materials not only plays a crucial role in determining the performance of nanoelectronic and optoelectronic devices but also introduces complexities in predicting volume-dependent properties, such as energy storage capacity, due to the intrinsic vacuum within these materials. Although a plethora of experimental techniques, including but not limited to optical contrast, Raman spectroscopy, nonlinear optical spectroscopy, near-field optical imaging, and hyperspectral imaging, facilitate the measurement of 2D material thickness, comprehensive data for many materials remain elusive. Over the past decade, the exponential proliferation of 2D materials and their heterostructures has outstripped the capabilities of conventional experimental and computational approaches. In this evolving landscape, machine learning (ML) has emerged as an indispensable tool, offering a scalable approach to augment these traditional methodologies. Addressing the critical gap, we introduce THICK2D—Thickness Hierarchy Inference and Calculation Kit for 2D Materials. This Python-based computational framework harnesses an autogenerated thickness database, developed using large language models, and advanced ML algorithms to facilitate the rapid and scalable estimation of material thickness, relying solely on crystallographic data. To demonstrate the utility and robustness of THICK2D, we successfully used the toolkit to predict the thickness of more than 8000 2D-based materials, sourced from two extensive 2D materials databases. THICK2D is disseminated as an open-source utility, accessible on GitHub at https://github.com/gmp007/THICK2D, and archived on Zenodo at https://10.5281/zenodo.11216648.

Ekuma, Chinedu E. (ORCID:0000000258527556)↗
DOE OSTI2023

Demonstrating non-isothermal vacuum membrane air dehumidification for efficient next-generation air conditioning

Vacuum membrane air dehumidification has gained significant interest in recent years as a highly efficient means of air dehumidification. Prior theoretical modeling work by the authors introduced the Active Membrane Energy Exchanger (AMX) concept, which combines active heat exchange and vacuum membrane dehumidification into one non-isothermal system, and found that it could outperform other air conditioning technologies under many conditions. However, no experimental literature exists on combining active heat exchangers and vacuum membrane dehumidification. Here, the goal of the present study is to evaluate the dehumidification (mass transfer) performance of the AMX concept relative to isothermal membrane dehumidification through three main methodologies: (1) membrane material-level characterization, (2) experimental prototype development and testing, and (3) computational fluid dynamics (CFD) simulations. The dense membranes used in this work showed up to a 40% increase in water vapor permeance at cooler temperatures, and the prototype system showed up to a 6% increase in humidity removal when the air was simultaneously cooled. Furthermore, the membrane module-integrated heat exchange tubes provided additional mixing and turbulence, leading to a 4–8% increase in humidity removal. The upper limit coefficient of performance was equal to approximately 2.2, necessitating advanced system designs to improve efficiency. This study is the first to highlight that combining the cooling and vacuum dehumidification processes can improve dehumidification performance.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Vacuum laser acceleration of super-ponderomotive electrons using relativistic transparency injection

Abstract Intense lasers can accelerate electrons to very high energy over a short distance. Such compact accelerators have several potential applications including fast ignition, high energy physics, and radiography. Among the various schemes of laser-based electron acceleration, vacuum laser acceleration has the merits of super-high acceleration gradient and great simplicity. Yet its realization has been difficult because injecting free electrons into the fast-oscillating laser field is not trivial. Here we demonstrate free-electron injection and subsequent vacuum laser acceleration of electrons up to 20 MeV using the relativistic transparency effect. When a high-contrast intense laser drives a thin solid foil, electrons from the dense opaque plasma are first accelerated to near-light speed by the standing laser wave in front of the solid foil and subsequently injected into the transmitted laser field as the opaque plasma becomes relativistically transparent. It is possible to further optimize the electron injection/acceleration by manipulating the laser polarization, incident angle, and temporal pulse shaping. Our result also sheds light on the fundamental relativistic transparency process, crucial for producing secondary particle and light sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Elucidating the Influence of Metal Surface Composition on Organic Adsorbate Binding Using Active Particle Dynamics

The adsorption strengths of organic compounds on metal surfaces are sensitive to the metal composition, and they play a central role in many catalytic reactions, helping to control the coverage of the reactant and altering the overall reaction rate. While adsorption energies are straightforward to measure and calculate in vacuum and gas-phase environments, adsorption energetics can be dramatically altered by the presence of solvent in liquid-phase reactions. However, the effects of metal composition on binding strengths in a liquid environment are less well understood, primarily due to the difficulty of accurate in situ measurements of organic binding on metal surfaces in the liquid phase. Here, we utilize the motion of active particles in water to probe the adsorption energies of an organic adsorbate (furfural) on a range of metal surfaces (pure Pd, pure Pt, and four PdAu alloy compositions) to elucidate the effect of metal composition. Janus particles with catalytic caps of particular metal compositions all exhibited active motion resulting from consumption of H 2 O 2 ; adsorbate binding was inferred through the decrease in the velocity of active motion and was modeled by a Langmuir adsorption isotherm. The measured adsorption affinities were used to extract the adsorption enthalpy of furfural on the different metals. The Pd surface was found to bind furfural more strongly than the Pt surface by some 10 kJ/mol. Furthermore, the adsorption of furfural on the alloys was found to increase monotonically in magnitude with Pd content. As a result, the data reported herein aid the development of accurate understanding of organic adsorption in the presence of solvent and the role of the metal surface in tuning adsorption strengths to optimize catalytic processes in the liquid phase.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Aging of Self-Assembled Lead Halide Perovskite Nanocrystal Superlattices: Effects on Photoluminescence and Energy Transfer

Excitonic coupling, electronic coupling, and cooperative interactions in self-assembled lead halide perovskite nanocrystals were reported to give rise to a red-shifted collective emission peak with accelerated dynamics. Here we report that similar spectroscopic features could appear as a result of the nanocrystal reactivity within the self-assembled superlattices. This is demonstrated by studying CsPbBr 3 nanocrystal superlattices over time with room-temperature and cryogenic micro-photoluminescence spectroscopy, X-ray diffraction, and electron microscopy. It is shown that a gradual contraction of the superlattices and subsequent coalescence of the nanocrystals occurs over several days of keeping such structures under vacuum. As a result, a narrow, low-energy emission peak is observed at 4 K with a concomitant shortening of the photoluminescence lifetime due to the energy transfer between nanocrystals. When exposed to air, self-assembled CsPbBr 3 nanocrystals develop bulk-like CsPbBr 3 particles on top of the superlattices. At 4 K, these particles produce a distribution of narrow, low-energy emission peaks with short lifetimes and excitation fluence-dependent, oscillatory decays. Overall, the aging of CsPbBr 3 nanocrystal assemblies dramatically alters their emission properties and that should not be overlooked when studying collective optoelectronic phenomena nor confused with superfluorescence effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Design of target irradiation and diagnostic chamber to study ps-laser generated plasma as a source of singly charged ions for external injection into an electron beam ion source

High repetition-rate (~10 kHz) ps-lasers are becoming available on the market with reasonable cost and may offer several advantages compared to ns-lasers by generating nearly continuous beams of singly charged ions appropriate for the “slow” injection mode into the Electron Beam Ion Source (EBIS). To evaluate these advantages, we will perform studies of a ps-laser generated plasma using a laser with a pulse duration of 8 ps and energy up to 5 mJ per pulse. A vacuum chamber equipped with a 3D target positioner, a focusing lens, and a Faraday Cup has been designed and built for this study. Lens-to-target distance variations have been measured using a laser tracker over the whole range of horizontal and vertical translation for all five targets we will use. The variations were found to be within ±150 µm. This level of “target flatness” should be acceptable for our experimental conditions. Ion currents and ion pulse durations of various elements (from Al to Ta) will be measured for different target irradiation conditions (focal spot size and laser pulse energy). The results obtained will allow us to specify all parameters and geometry of a laser ion source based on a ps-laser to provide external ion injection into the relativistic heavy ion collider EBIS

43 PARTICLE ACCELERATORS↗