Search NASA⌕ Search

SEARCH · Search NASA

Results for “WATER CLOUD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Composited structure of non-precipitating shallow cumulus clouds

The normalized distributions of thermodynamic and dynamical variables both within and outside shallow clouds are investigated through a composite algorithm using large-eddy simulations of oceanic and continental cases. The normalized magnitude is maximum near the cloud centre and decreases outwards. While relative humidity (RH) and cloud liquid water ( q l ) decrease smoothly to match the environment, the vertical velocity, virtual potential temperature (θ v ), and potential temperature (θ) perturbations have more complicated behaviour towards the cloud boundary. Below the inversion layer, θ' v becomes negative before the vertical velocity has turned from an updraft to a subsiding shell outside the cloud, indicating the presence of a transition zone where the updraft is negatively buoyant. Due to the downdraft outside the cloud and enhanced horizontal turbulent mixing across the edge, the normalized turbulent kinetic energy (TKE) and horizontal turbulent kinetic energy (HTKE) decrease more slowly from the cloud centre outwards than the thermodynamic variables. The distributions all present asymmetric structures in response to the vertical wind shear, with more negatively buoyant air, stronger downdrafts, and larger TKE on the downshear side. We discuss several implications of the distributions for theoretical models and parameterizations. Positive buoyancy near the cloud base is mostly due to the virtual effect of water vapour, emphasizing the role of moisture in triggering. The mean vertical velocity is found to be approximately half the maximum vertical velocity within each cloud, providing a constraint to achieve possible power-law distributions for some models. Finally, the normalized distributions for different variables are used to estimate the vertical heat and moisture fluxes within clouds. The results suggest that distributions near the cloud edge and variability of maximum perturbations need careful treatment. The fluxes are underestimated in the inversion layer because cloud-top downdrafts cannot be captured well.

54 ENVIRONMENTAL SCIENCES↗

The Shortwave Radiative Flux Response to an Injection of Sea Salt Aerosols in the Gulf of Mexico

We report marine cloud brightening (MCB) has been proposed as a potential means of geoengineering the climate, temporarily providing cooling to offset some of the effects of climate change. Marine sky brightening (MSB), involving the direct scattering of sunlight from sea salt injection into the marine boundary layer, has been proposed as an additional geoengineering method that could work in areas that are not regularly cloudy. Here, we use a regional atmospheric model to simulate MCB and MSB over the Gulf of Mexico and nearby land, a highly populated and economically important region that is not characterized by persistent marine stratocumulus cloud cover. Injection of sea salt in the Aitken mode from a region in the central Gulf of Mexico equivalent to 10.8 Tg yr -1 produces an upwards 8.4 W m -2 radiative flux change across the region at the top of the atmosphere, largely due to cloud property changes. Comparatively, a similar mass injection in the accumulation mode produces a 3.1 W m -2 radiative flux change driven primarily by direct scattering. Injection of even larger particles produces a much smaller radiative flux change. Shortwave flux changes due to clouds are largely driven by an increase in cloud droplet number concentration and an increase in cloud liquid water path (each contributing about 45% to the flux change), with a much lower contribution from cloud fraction changes (10%).

54 ENVIRONMENTAL SCIENCES↗

The Role of In-Cloud Wet Removal in Simulating Aerosol Vertical Profiles and Cloud Radiative Forcing

Among the physical processes controlling aerosol vertical profiles, in-cloud wet removal is of utmost importance while its representation in global climate models (GCMs) is crude. In this study, we implement into the Community Atmosphere Model version 6 (CAM6) a physically based aerosol wet removal parameterization scheme that explicitly treats aerosol activation, removal and resuspension. Evaluation against in-situ observations shows that the default scheme substantially overestimates the upper tropospheric black carbon (BC) and sea salt mass. Our physically based scheme reduces BC and sea salt mass by a factor of 10 and 1,000, respectively, in better agreement with observations. Also, the new scheme slightly increases number of aerosol particles between 12 nm and 4.8 μm in diameter, thereby mitigating the aerosol number underestimation in the default scheme. Our new scheme reduces the overestimation of coarse-mode aerosol (0.5–4.8 μm) number. Overall, the aerosol property changes (mass decrease and number increase) reduce the cloud condensation nuclei (CCN) concentration at low supersaturation (i.e., 0.02% and 0.1%), and increase CCN at high supersaturations (i.e., 0.5% and 1%). Consequently, the global annual mean cloud liquid water path increases by 1.89 g m -2 and the ice water path increases by 0.51 g m -2 . The global annual mean shortwave, longwave, and net cloud radiative forcing change by -1.06, 0.57, and -0.48 W m -2 , respectively. Further improvement is needed to reflect the real physics that the removal efficiencies for aerosol mass and number are disproportionate and to advect cloud-borne (activated) aerosols for a complete aerosol lifecycle.

54 ENVIRONMENTAL SCIENCES↗

Evaluating the Lagrangian Evolution of Subtropical Low Clouds in GCMs Using Observations: Mean Evolution, Time Scales, and Responses to Predictors

In this work, a Lagrangian framework is developed to show the daily-scale time evolution of low clouds over the eastern subtropical oceans. An identical framework is applied to two general circulation models (GCMs): the CAM5 and UKMET and a set of satellite observations. This approach follows thousands of parcels as they advect downwind in the subtropical trade winds, comparing cloud evolution in time and space. This study tracks cloud cover, in-cloud liquid water path (CLWP), droplet concentration $N_d$, planetary boundary layer (PBL) depth, and rain rate as clouds transition from regions with predominately stratiform clouds to regions containing mostly trade cumulus. The two models generate fewer clouds with greater $N_d$ relative to observations. Models show stronger Lagrangian cloud cover decline and greater PBL deepening when compared with observations. In comparing frequency distributions of cloud variables over time, it is seen that models generate increasing frequencies of nearly clear conditions at the expense of overcast conditions, whereas observations show transitions from overcast to cloud amounts between 50% and 90%. Lagrangian decorrelation time scales ($\mathcal{e}$-folding time $\tau$) of cloud cover and CLWP are between 11 and 19 h for models and observations, although they are a bit shorter for models. A Lagrangian framework applied here resolves and compares the time evolution of cloud systems as they adjust to environmental perturbations in models and observations. Increasing subsidence in the overlying troposphere leads to declining cloud cover, CLWP, PBL depth, and rain rates in models and observations. Modeled cloud responses to other meteorological variables are less consistent with observations, suggesting a need for continuing mechanical improvements in GCMs.

58 GEOSCIENCES↗

Overview of the Nephele Perturbed Parameter Ensemble for Aerosol‐Cloud Interactions in E3SMv3

Aerosol-cloud interactions (aci) are the leading source of uncertainty in inferring climate sensitivity from the historical record. Earth system models (ESMs) struggle to represent aci because the processes responsible for these phenomena occur at much finer time and space scales than can be resolved by any ESM. Observational constraints provide key benchmarks to test ESMs, but cannot be used alone to fully understand aci processes except in very specific cases where causality is controlled; some degree of modeling is required to infer aci and estimate radiative forcing. Here, we generate and characterize a perturbed parameter ensemble (PPE) in version 3 of the Energy Exascale ESM (E3SMv3). We perturb 25 parameters that govern aci processes over 250 members and integrate the model over present-day and preindustrial aerosol emissions. We find that the process representation in E3SMv3 is flexible and can generate global-mean effective radiative forcings due to aci (ERFaci) ranging from −3.0 to +0.9 W m −2 . The positive ERFaci values simulated by a portion of the PPE are implausible and result from parameter combinations that produce unrealistic top-of-atmosphere energy fluxes. While global-mean cloud droplet number concentration always increases in response to anthropogenic aerosol, cloud liquid water path can both increase and decrease, suggesting that precipitation suppression is not the only aerosol-cloud adjustment represented by E3SMv3. Analysis of which processes control liquid cloud adjustment in the PPE points toward stratiform precipitation processes and aerosol activation, which is consistent with many previous ESMs, as well as the new two-moment convective cloud microphysics in E3SMv3.

Nugent, Jacqueline M. [Univ. of Wyoming, Laramie, ↗

MODIS Aerosol and Low‐Cloud Retrievals: Orographic Effects in the Wake of Macquarie Island

Abstract Visible/infrared imagery from passive satellites is commonly relied upon to study low cloud microphysics over oceanic regions, including for the Southern Ocean (SO), but relatively little validation has been undertaken for the SO. In this article, we compare low‐cloud effective radius ( r e ), cloud droplet number concentration ( N d ) and cloud liquid water path (LWP) retrievals from the NASA Moderate Imaging Spectroradiometer (MODIS) with surface measurements collected during the Macquarie Island Cloud and Radiation Experiment (MICRE). MODIS 3.7‐μm band retrievals show little bias and moderately good correlation relative to MICRE retrievals for liquid‐phase low clouds when restricted to Solar Zenith Angles <65° on spatial scales of 50–100 km. However, the low overall bias in 3.7‐μm band effective radius ( r e 3.7 ) retrievals partly results from cancellation of errors: r e 3.7 is overestimated for non‐to‐lightly precipitating clouds, and underestimated for heavier drizzling clouds by ∼1–1.5 μm. 1.6‐μm and 2.1‐μm band r e retrievals are biased high. N d may likewise be slightly under‐ or overestimated depending on the concentration, but there is insufficient data to provide confidence in this result. Interestingly, a composite of MODIS retrievals from 2002 to 2020 show a distinct region of enhanced cloud cover and N d (and lower r e ) in the wake of Macquarie Island associated with orographic cloud formation. MODIS retrievals of aerosol optical depth (AOD) and Angstrom Exponent (AE) upwind and downwind of the island do not differ significantly. Comparison with MICRE measurements suggests that MODIS Collection 6 AOD retrievals are reasonable, while AE is problematically large.

54 ENVIRONMENTAL SCIENCES↗

The Relation of Environmental Conditions With Charge Structure in Central Argentina Thunderstorms

In this study we explored the environmental conditions hypothesized to induce a dominant charge structure in thunderstorms in the province of Cordoba, Argentina, during the RELAMPAGO-CACTI (Remote sensing of Electrification, Lightning, And Mesoscale/microscale Processes with Adaptive Ground Observations-Clouds, Aerosols, Complex Terrain Interactions) field campaigns. Hypothesized environmental conditions are thought to be related to small warm cloud residence time and warm rain growth suppression, which lead to high cloud liquid water contents in the mixed-phase zone, contributing to positive charging of graupel and anomalous charge structure storms. Data from radiosondes, a cloud condensation nuclei (CCN) ground-based instrument and reanalysis were used to characterize the proximity inflow air of storms with anomalous and normal charge structures. Consistent with the initial hypothesis, anomalous storms had small warm cloud depth caused by dry low-level humidity and low 0°C height. Anomalous storms were associated with lower CCN concentrations than normal storms, an opposite result to the initial expectation. High CAPE is not an important condition for the development of anomalous storms in Argentina, as no clear pattern could be found among the different parameters calculated for updraft proxy that would be consistent with the initial hypothesis.

54 ENVIRONMENTAL SCIENCES↗

The winter central Arctic surface energy budget: A model evaluation using observations from the MOSAiC campaign

This study evaluates the simulation of wintertime (15 October, 2019, to 15 March, 2020) statistics of the central Arctic near-surface atmosphere and surface energy budget observed during the MOSAiC campaign with short-term forecasts from 7 state-of-the-art operational and experimental forecast systems. Five of these systems are fully coupled ocean-sea ice-atmosphere models. Forecast systems need to simultaneously simulate the impact of radiative effects, turbulence, and precipitation processes on the surface energy budget and near-surface atmospheric conditions in order to produce useful forecasts of the Arctic system. This study focuses on processes unique to the Arctic, such as, the representation of liquid-bearing clouds at cold temperatures and the representation of a persistent stable boundary layer. It is found that contemporary models still struggle to maintain liquid water in clouds at cold temperatures. Given the simple balance between net longwave radiation, sensible heat flux, and conductive ground flux in the wintertime Arctic surface energy balance, a bias in one of these components manifests as a compensating bias in other terms. This study highlights the different manifestations of model bias and the potential implications on other terms. Three general types of challenges are found within the models evaluated: representing the radiative impact of clouds, representing the interaction of atmospheric heat fluxes with sub-surface fluxes (i.e., snow and ice properties), and representing the relationship between stability and turbulent heat fluxes.

54 ENVIRONMENTAL SCIENCES↗

The role of local shipping emissions in aerosol-cloud interactions in the central Arctic

Arctic shipping is projected to increase as sea ice retreats, yet the impact of modern low-sulfur ship emissions on Arctic clouds and radiation remain poorly constrained. We use year-long in situ observations from the MOSAiC expedition to characterize ship-aerosol-cloud interactions for an icebreaker burning ultra-low sulfur fuel (0.1% mass per mass). Exhaust plumes were found to be strongly enriched in Aitken-mode particles, organic aerosol, and black carbon, but showed no detectable enhancement in particulate sulfate. Despite reduced hygroscopicity relative to ambient aerosols, ship emissions substantially increased local cloud condensation nuclei concentrations. A droplet activation parameterization was applied to quantify responses in cloud droplet number concentration ( N d ) to ship-induced perturbations in low-level Arctic clouds. In winter, abundant background accumulation-mode particles from Arctic haze supplied nearly all cloud droplets, while additional particles from ship emissions had little impact on N d . In contrast, during summer months, when unperturbed background aerosol concentrations are low, ship emissions nearly doubled N d compared to average background conditions and increased N d by a factor of five compared to very clean background conditions (25th percentile of background aerosol number concentrations). Longwave radiative transfer simulations for typical conditions of summer Arctic low-level clouds/fog suggest that these ship-induced increases in N d locally (i.e. <100 km downwind) lead to enhanced net surface longwave fluxes and consequent warming, primarily for optically thin clouds (liquid water path (LWP) ⩽ 30 g·m −2 ). For LWP = 10 g · m −2 , ship emissions lead to an increase of 1 W · m −2 in cloud longwave forcing at the surface compared to average unperturbed conditions (+7% relative increase), and up to 4 W · m −2 when compared to very clean background conditions (+22% relative increase). Even ultra-low sulfur fuel emissions can therefore locally and episodically modify Arctic cloud microphysics and radiative properties, especially during summer, implying that future increases in Arctic shipping could have non-negligible regional climate impacts.

Arctic↗

Final report: Insights from ARM observations into aerosol processing and transport by extratropical cyclones and aerosol effects on cyclone clouds

This project advanced understanding of aerosol–cloud interactions in extratropical cyclones using observations from the Atmospheric Radiation Measurement (ARM) Eastern North Atlantic (ENA) observatory and ACE-ENA field campaigns, along with satellite datasets and numerical modeling. We have quantified the susceptibility of frontal clouds to aerosols, showing that this susceptibility is similar to that in non-frontal clouds despite substantial (factor 2) differences in droplet concentrations between these cloud types, and also significant differences in cloud albedo. A key finding was that Aitken-mode (here, 60-100nm diameter) aerosols play a disproportionately important role in droplet activation in frontal clouds, and concentrations of these particles are frequently strongly biased in climate models. Activation of aerosols depends strongly on updraft speeds, and via collaboration with Argonne National Laboratory we contributed to quantifying these better with the ARM radar wind profiler at the ENA site. Our studies in the North Atlantic have analogs in the Southern Ocean, and to draw these out we examined data from the MARCUS and SOCRATES field campaigns. We identified new particle formation within extratropical cyclones as a potentially important source of cloud condensation nuclei in these pristine marine environments. By combining ARM observations with perturbed parameter ensemble simulations, we demonstrated that surface observations can effectively constrain aerosol–cloud adjustments and reduce uncertainty in simulated cloud liquid water path responses by approximately 15%, yielding stronger constraints on historical aerosol cooling effects. The work further established precipitation processes as a dominant control on aerosol–cloud interactions and Earth system predictability.

Gordon, Hamish [Department of Chemical Engineering↗

Response of marine post-frontal clouds to Gulf Stream variability

Understanding how Gulf Stream variation influences cloud morphology is critical for evaluating cloud feedback in the western North Atlantic Ocean and beyond, where mesoscale air-sea interactions dominate. This study investigates the impact of altered mean sea surface temperature (SST) and SST gradients on post-frontal cloud characteristics during cold-air outbreaks, using the Weather Research and Forecasting (WRF) model. Three sensitivity experiments are conducted: a control simulation (default SST), Plus4 (uniform SST increase of 4 K), and Gradplus (SST gradient enhanced by 25 %, centered around mean SST). Results reveal distinctly different responses in boundary layer dynamics and cloud macro-physics. In Plus4, a warmer and moister boundary layer reduces total cloud cover but promotes larger cloud sizes and elongated cloud streets, with diminished liquid water and enhanced ice-phase hydrometeors. Conversely, Gradplus amplifies impacts in the upwind colder SST regions, yielding a drier, colder boundary layer, weaker energy transport, and higher liquid water path but reduced ice water content and cloud lines. Tracer analysis highlights that SST modifications alter airmass sources near cloud tops due to the entrainment of ambient air, with Plus4 amplifying boundary layer contributions to cloud-top regions. These findings underscore the spatially varying effects of SST gradients and mean SST on cloud organization and microphysics, emphasizing the need to resolve ocean-atmosphere coupling in global models to improve the prediction of marine cloud feedback under warming scenarios.

AIR-SEA INTERACTION↗

ARM Data-Oriented Metrics and Diagnostics Package for Climate Model Evaluation

A Python-based metrics and diagnostics package is currently being developed by the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Infrastructure Team at Lawrence Livermore National Laboratory (LLNL) to facilitate the use of long-term, high-frequency measurements from the ARM Facility in evaluating the regional climate simulation of clouds, radiation, and precipitation. This metrics and diagnostics package computes climatological means of targeted climate model simulation and generates tables and plots for comparing the model simulation with ARM observational data. The Coupled Model Intercomparison Project (CMIP) model data sets are also included in the package to enable model intercomparison as demonstrated in Zhang et al. (2017). The mean of the CMIP model can serve as a reference for individual models. Basic performance metrics are computed to measure the accuracy of mean state and variability of climate models. The evaluated physical quantities include cloud fraction, temperature, relative humidity, cloud liquid water path, total column water vapor, precipitation, sensible and latent heat fluxes, and radiative fluxes, with plan to extend to more fields, such as aerosol and microphysics properties. Process-oriented diagnostics focusing on individual cloud- and precipitation-related phenomena are also being developed for the evaluation and development of specific model physical parameterizations. The version 1.0 package is designed based on data collected at ARM’s Southern Great Plains (SGP) Research Facility, with the plan to extend to other ARM sites. The metrics and diagnostics package is currently built upon standard Python libraries and additional Python packages developed by DOE (such as CDMS and CDAT). The ARM metrics and diagnostic package is available publicly with the hope that it can serve as an easy entry point for climate modelers to compare their models with ARM data. In this report, we first present the input data, which constitutes the core content of the metrics and diagnostics package in section 2, and a user's guide documenting the workflow/structure of the version 1.0 codes, and including step-by-step instruction for running the package in section 3.

54 ENVIRONMENTAL SCIENCES↗

Microwave Radiometer: Meteorological Temperature Profiler (raw)

The microwave radiometer profiler (MWRP) provides vertical profiles of temperature, humidity, and cloud liquid water content as a function of height or pressure at approximately 5-minute intervals for nearly all weather conditions. The profiles are derived from measurements of absolute microwave radiances (expressed as "brightness temperatures") obtained at 12 frequencies in the range of 22-30 GHz and 51-59 GHz. The data are useful for input to numerical weather forecast models and others that require continuous, high-temporal-resolution profiles. The microwave radiance measurements are useful for testing models of microwave radiation transfer used to derive the profiles.

54 ENVIRONMENTAL SCIENCES↗

Radiative feedbacks on land surface change and associated tropical precipitation shifts

Changes in land surface albedo and land surface evaporation modulate the atmospheric energy budget by changing temperatures, water vapor, clouds, snow and ice cover, and the partitioning of surface energy fluxes. Here idealized perturbations to land surface properties are imposed in a global model to understand how such forcings drive shifts in zonal mean atmospheric energy transport and zonal mean tropical precipitation. For a uniform decrease in global land albedo, the albedo forcing and a positive water vapor feedback contribute roughly equally to increased energy absorption at the top of the atmosphere (TOA), while radiative changes due to the temperature and cloud cover response provide a negative feedback and energy loss at TOA. Decreasing land albedo causes a northwards shift in the zonal mean intertropical convergence zone (ITCZ). The combined effects on ITCZ location of all atmospheric feedbacks roughly cancel for the albedo forcing; the total ITCZ shift is comparable to that predicted for the albedo forcing alone. For an imposed increase in evaporative resistance that reduces land evaporation, low cloud cover decreases in the northern mid-latitudes and more energy is absorbed at TOA there; longwave loss due to warming provides a negative feedback on the TOA energy balance and ITCZ shift. Imposed changes in land albedo and evaporative resistance modulate fundamentally different aspects of the surface energy budget. However, the pattern of TOA radiation changes due to the water vapor and air temperature responses are highly correlated for these two forcings because both forcings lead to near-surface warming.

54 ENVIRONMENTAL SCIENCES↗

ARM data-oriented metrics and diagnostics package for climate model evaluation (ARM-DIAGS-V3) version 3

A Python-based metrics and diagnostics package is currently being developed by the ARM Infrastructure Team at Lawrence Livermore National Laboratory to facilitate the use of long-term high frequency measurements from the ARM program in evaluating the regional climate simulation of clouds, radiation, precipitation, and aerosols. This metrics and diagnostics package computes climatological means of targeted climate model simulation and generates tables and plots for comparing the model simulation with ARM observational data. The CMIP model data sets are also included in the package to enable model inter-comparison as demonstrated in Zhang et al. (2018) and Zhang et al. (2020). The mean of the CMIP model can be served as a reference for individual models. Basic performance metrics are computed to measure the accuracy of mean state and variability of climate models. The evaluated physical quantities include cloud fraction, temperature, relative humidity, cloud liquid water path, total column water vapor, precipitation, sensible and latent heat fluxes, aerosol optical depth, and radiative fluxes, with plan to extend to more fields, such as the evaluation of model simulated aerosol physicochemical properties and cloud microphysics properties. Process-oriented diagnostics focusing on aerosol, cloud, and precipitation-related phenomena are also being developed for the evaluation and development of specific model physical parameterizations. In addition to the Southern Great Plains (SGP), North Slope of Alaska (NSA) and Tropical Western Pacific (TWP) atmospheric observatories in the ARMDIAGS version 2.0, the version 3.0 package have extended to the data collected at the ARM Eastern North Atlantic (ENA) atmospheric observatory and the Observation and Modeling of the Green Ocean Amazon (GOAMAZON) field campaign. The metrics and diagnostics package are currently built upon standard Python libraries and additional Python packages developed by DOE (CDAT). The ARM metrics and diagnostic package is available publicly with the hope that it can serve as an easy entry point for climate modelers to compare their models with ARM data. In this report, we first provide an overview of major metrics in section 2. The input data, which constitutes the core content of the metrics and diagnostics package, is summarized in section 3. A user's guide documenting the workflow/structure of the version 3.0 codes and including step-by-step instruction for running the package is described in section 4.

54 ENVIRONMENTAL SCIENCES↗

Are Marine Low Cloud Droplet Concentrations Buffered by Entrained Aitken‐Mode Aerosol (Final Technical Report)

During the summertime, the high-latitude oceans come to life with green phytoplankton, which gain their energy from sunlight and are food for sea creatures small and large. When the phytoplankton are eaten or die, sulfur-rich gases are released under the ocean surface and mix into the air. Observations suggest that, over the Southern Ocean, frequent storms lift this air high into the atmosphere while raining out particulates like salt. As a result, the sulfur-rich air then spawns high concentrations of small ‘Aitken-mode’ aerosol particles. We hypothesize that these particles work their way down into the marine boundary layer, where they can replenish the supply of cloud-condensation nuclei scavenged by frequent precipitation. Further, this process maintains high concentrations of liquid cloud droplets in austral summer, promoting more sunlight to be reflected to space. We call this ‘Aitken buffering’. The primary objective of this project has been to document and test what role Aitken-mode aerosols play in clouds over the Southern Ocean and elsewhere. This effort has included three main components: 1) developing a computer model that realistically simulates the aerosol processes and the small-scale turbulent air motions that move aerosols around and create the clouds, 2) using that model to interpret and extend these observations for process understanding, by allowing different factors that contribute to the aerosol budget, such as surface wind speed, precipitation, surface gas exchange, etc. to be separated, and 3) studying Aitken-mode aerosol and its variability with a focus over the Southern Ocean and Antarctica, using data from Atmospheric Radiation Measurement (ARM) sites and other available observations. Initial computer studies in more idealized conditions found that elevated concentrations of Aitken-mode aerosols above the clouds could help prevent the breakup of those clouds by acting as cloud-condensation nuclei after they were entrained into the cloudy boundary layer. Simulations of a day during the ACE-ENA field campaign showed that Aitken-mode aerosols could also prevent cloud breakup under more realistic conditions. A new method that extracts information about Aitken-mode aerosols from measurements of aerosols onto which cloud droplets can form finds that Aitken-mode aerosols do vary seasonally over the Southern Ocean, with a peak in summertime, as described above. Other work during this project has focused on understanding how patterns of water vapor, clouds and precipitation are coupled within low-lying clouds over the oceans, and also on how cloud droplets cluster within clouds and how the distribution of cloud droplet sizes change as dry air is mixed into clouds, with the latter studies also using observations from ACE-ENA.

54 ENVIRONMENTAL SCIENCES↗

Investigation of Isobaric Mixing as a Mechanism for Boundary‐Layer Cloud Formation

This study investigates the potential role of isobaric mixing in the formation of marine boundary layer clouds. Cloud formation theory emphasizes uplift and adiabatic cooling, but recent observations support the existence of small clouds forming at various altitudes, even below the lifting condensation level. Isobaric mixing of air with different thermodynamic properties can generate localized supersaturation. A Gaussian mixing model is employed to simulate this process, considering the correlation between temperature and water vapor. Cloud droplet size distributions from aircraft measurements show a persistent and prominent mode of small droplets at 9 m, and the size of this mode compares favorably with predictions from the model. The results suggests that isobaric mixing plausibly contributes to the formation of clouds, particularly those observed at multiple altitudes with narrow droplet size distributions. This finding highlights the importance of considering isobaric mixing processes in understanding and modeling cloud formation.

54 ENVIRONMENTAL SCIENCES↗

Constraining aerosol–cloud adjustments by uniting surface observations with a perturbed parameter ensemble

Abstract. Aerosol–cloud interactions (ACIs) are the largest source of uncertainty in inferring the magnitude of future warming consistent with the observational record. The effective radiative forcing due to ACI (ERFaci) is dominated by liquid clouds and is composed of two terms: the change in cloud albedo due to redistributing liquid over a larger number of cloud droplets (Nd) and the change in cloud macrophysical properties due to changes in cloud microphysics. These terms are, respectively, referred to as the radiative forcing due to ACI (RFaci) and aerosol–cloud adjustments. While the magnitude of RFaci is uncertain, its sign is confidently negative and results in a cooling in the historical record. In contrast, the adjustment of cloud liquid water path (LWP) to enhanced Nd and associated radiative forcing is uncertain in sign. Increased LWP in response to increased Nd is consistent with precipitation suppression, while decreased LWP in response to increased Nd is consistent with enhanced evaporation from cloud top. Observational constraints of these processes are poor in part because of causal ambiguity in the relationship between Nd and LWP. To better understand this relationship, precipitation (P), Nd, and LWP surface observations from the Eastern North Atlantic (ENA) atmospheric observatory are combined with the output from a perturbed parameter ensemble (PPE) hosted in the Community Atmosphere Model version 6 (CAM6). This allows for causal interpretation of observed covariability. Observations of precipitation and cloud from ENA constrain the range of possible LWP aerosol–cloud adjustments relative to the prior from the PPE by 15 %, resulting in a global value that is confidently positive (a historical cooling) ranging from 2.1 to 6.9 g m−2. It is found that observed covariability between Nd and LWP is dominated by coalescence scavenging and that this observed covariability is not strongly related to aerosol–cloud adjustments.

54 ENVIRONMENTAL SCIENCES↗