Search NASA⌕ Search

SEARCH · Search NASA

Results for “WIND TUNNEL NOZZLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Wind tunnel measurements of forward speed effects on jet noise from suppressor nozzles and comparison with flight test data

The results of a test program conducted in the NASA Ames 40- by 80-Foot Wind Tunnel to determine the effect of forward speed on the noise levels emanating from a conical ejector nozzle, a 32-spoke suppressor nozzle, and a 104-elliptical-tube suppressor nozzle are reported. It is shown that noise levels are reduced as forward speed is increased and that, for one suppressor configuration, forward speed enhances suppression. Comparisons of noise measurements made in the wind tunnel with those obtained in flight tests show good agreement. It is concluded that wind tunnels provide an effective means of measuring the effect of forward speed on aircraft noise.

Atencio, A., Jr.↗
NASA NTRS1975

Wind tunnel measurements of forward speed effects on jet noise from suppressor nozzles and comparison with flight test data

The results of a test program conducted in the NASA Ames 40- by 80-Foot Wind Tunnel to determine the effect of forward speed on the noise levels emanating from a conical ejector nozzle, a 32-spoke suppressor nozzle, and a 104-elliptical-tube suppressor nozzle are reported. It is shown that noise levels are reduced as forward speed is increased and that, for one suppressor configuration, forward speed enhances suppression. Comparisons of noise measurements made in the wind tunnel with those obtained in flight tests show good agreement. It is concluded that wind tunnels provide an effective means of measuring the effect of forward speed on aircraft noise.

Atencio, A., Jr.↗
NASA NTRS1977

Effect of simulated forward speed on the jet noise of inverted velocity profile coannular nozzles

Tests were conducted of inverted velocity profile coannular nozzles and a conical nozzle in an acoustic wind tunnel facility to simulate flight effects on jet noise generation. Coannular model nozzles were tested at fan to core nozzle exit area ratios of .75 and 1.2. Fan stream jet velocity ranged up to 2000 fps at a variety of fan exhaust pressure ratios and temperatures for a core stream of 1000 fps. The wind tunnel airflow was varied from static to 425 fps. The acoustic results indicated that the noise level differences seen previously under static conditions are retained in the flight environment.

Packman, A. B.↗
NASA NTRS1978

A review of thrust-vectoring schemes for fighter applications

This paper presents a review of thrust vectoring schemes for advanced fighter applications. Results are presented from wind tunnel and system integration studies on thrust vectoring nozzle concepts. Vectoring data are presented from wind tunnel tests of axisymmetric C-D (convergent-divergent) and nonaxisymmetric wedge, C-D, single ramp and USB (upper-surface blowing) nozzle concepts. Results from recent airframe/nozzle integration studies on the impact of thrust vectoring on weight, cooling and performance characteristics are discussed. This review indicates that the aircraft designer has, at his disposal, a wide range of thrust vectoring schemes which offer potential for added or improved aircraft capability.

Berrier, B. L.↗
NASA NTRS1981

Jet noise results from static, wind tunnel, and flight tests of conical and mechanical suppressor nozzles

Results of jet noise suppression tests conducted on a Rolls-Royce Viper 601 turbojet engine are reported. Seven exhaust nozzle configurations are tested, including two conical nozzles, two suppressor mixers, and three treated ejector configurations with different ejector inlets. Tests are conducted at the NASA Ames outdoor static test facility and the 40- by 80-ft wind tunnel facility at minimum tunnel flow velocity and normal flow velocities of 230 and 290 ft/sec. Near-field multiple sideline noise levels are projected to the far fields to compare far-field fixed microphone outdoor static noise levels, and wind tunnel near-field noise data are projected to the far field and flight distances to compare with noise levels recorded from an Hs-125 aircraft. Near-field outdoor noise data duplicate the far-field data recorded from fixed microphones within 2 PNdB, and the Douglas mechanical jet noise suppressor/treated ejector exhaust system achieves a noise reduction of 12 EPNdB relative to a conic reference nozzle at equal thrust in flight.

Mckinnon, R. A.↗
NASA NTRS1974

Flow in a discrete slotted nozzle with massive injection

An experimental investigation has been conducted to determine the effect of massive wall injection on the flow characteristics in a slotted nozzle. Some of the experiments were performed on a water table with a slotted-nozzle test section. This has 45 deg and 15 deg half angles of convergence and divergence, respectively, throat radius of 2.5 inches, and throat width of 3 inches. The hydraulic analogy was employed to qualitatively extend the results to a compressible gas flow through the nozzle. Experimental results from the water table include contours of constant Froude and Mach number with and without injection. Photographic results are also presented for the injection through slots of CO2 and Freon-12 into a main-stream air flow in a convergent-divergent nozzle in a wind tunnel. Schlieren photographs were used to visualize the flow, and qualititative agreement between the results from the gas tunnel and water table is good.

Perkins, H. C.↗
NASA NTRS1977

Forward flight effects on EBF noise

Forward flight effects on local mean velocity and turbulence velocity profiles, surface pressure spectra, and far field acoustic pressure spectra were measured for a simple externally blown flap (EBF). Both upper-surface-blowing and under-the-wing configurations were tested. Ratio of acoustic wind tunnel velocity to nozzle exhaust velocity was varied from 0 to 3/8 in steps of 1/8. A method was determined for predicting forward flight effects on surface-radiated noise. This noise is decreased in amplitude and shifted to higher frequency relative to data obtained at zero flight speed. Predictions are validated by comparisons with published NASA, Boeing, and Lockheed data.

Fink, M. R.↗
NASA NTRS1984

Supersonic-Nozzle Shock-Wave Analysis

Analytical procedure used to modify design of high-pressure-ratio nozzles to reduce vibration during start-up and shutdown. Nozzles used in jet engines, laser nozzles and diffusers, wind tunnels, gas turbines and rocket engines.

Wagner, W. R.↗
NASA NTRS1983

Advanced technology exhaust nozzle development

The requirement for greater tactical aircraft operational capabilities has led to increasing research emphasis on the refinement of engine/airframe integration methods and exhaust nozzle flexibility. A major prospective advancement in the development of these capabilities takes the form of multifunctional exhaust nozzle systems with thrust reversal and thrust vectoring features, whose operation will be shared by both airframe and powerplant control systems. Attention is presently given to the two-dimensional convergent-divergent and single expansion ramp nozzle designs, with emphasis on the variable geometry mechanical systems by which they assume cruising flight, vectoring, and thrust reversal operations. The nozzles have been wind tunnel model-tested for the cases of the F-18 fighter and a supersonic cruise configuration concept.

Dusa, D. J.↗
NASA NTRS1985

Aerosol seeding systems for the NSWC wind tunnels

Four types of laskin nozzles which are used to generate the primary aerosol mist are illustrated. This mist may be used directly as laser doppler velocimeters (LDV) particles. However, in general, a wide range of particle size exists at this stage and requires the use of some type of mono-dispersion refinement technique. These nozzles rely on the shearing action of high speed air near a column of seeding liquid. Typically, olive oil or dioctyl phthalate (DOP) is used, but within the past year solid polystyrene particles in an alcohol suspension have been used with great success. Air, at a typical pressure of five psig, is supplied to the top of the nozzle which is merely a hollow tube. This air issues radially from one or more small jets located near the collar close to the bottom of the tube. When the collar is submerged in the seeding liquid, the hollow columns located in the collar become filled with liquid. The air from the jet shears the liquid into the fine mist.

Yanta, W. J.↗
NASA NTRS1966

Wind tunnels

Hypersonic wind tunnel stagnation conditions, wedge flow measurements, transonic entry capsule configuration, and internal pressure in conical pintle nozzle

WEDGE FLOW↗
NASA NTRS1975

Static and wind tunnel model tests for the development of externally blown flap noise reduction techniques

Externally blown flap models were tested for noise and performance at one-fifth scale in a static facility and at one-tenth scale in a large acoustically-treated wind tunnel. The static tests covered two flap designs, conical and ejector nozzles, third-flap noise-reduction treatments, internal blowing, and flap/nozzle geometry variations. The wind tunnel variables were triple-slotted or single-slotted flaps, sweep angle, and solid or perforated third flap. The static test program showed the following noise reductions at takeoff: 1.5 PNdB due to treating the third flap; 0.5 PNdB due to blowing from the third flap; 6 PNdB at flyover and 4.5 PNdB in the critical sideline plane (30 deg elevation) due to installation of the ejector nozzle. The wind tunnel program showed a reduction of 2 PNdB in the sideline plane due to a forward speed of 43.8 m/s (85 kn). The best combination of noise reduction concepts reduced the sideline noise of the reference aircraft at constant field length by 4 PNdB.

Pennock, A. P.↗
NASA NTRS1990

Experimental investigation of a single flush-mounted hypermixing nozzle

The results of an experimental wind tunnel investigation of a circular supersonic jet (m sub j = 3.47) injected at a 10 degree angle into a supersonic freestream. The jet penetrates a boundary layer, which has a thickness approximately the same as the jet nozzle exit diameter. Measurements were made for nominal freestream Mach numbers of 1.6, 2.0, 2.5, and 3.0. Three jet total pressures were run at each freestream Mach number, resulting in twelve separate operating conditions. Mean data accumulated by means of static and total pressure probe instrumentation are presented at two axial stations: seven jet nozzle diameters upstream and 15 jet nozzle diameters downstream from where the centerline of the nozzle intersects the wind tunnel wall. For one condition at each freestream Mach number, the jet air was seeded with a hydrocarbon trace gas and the flow was sampled at the downstream measurement plane to quantify the mean mixing of the two streams. Surface oil flow visualization was also used to investigate the flow interaction. All results are for air-to-air mixing. The measurements indicate the presence of two pairs contra-rotating vortices. One pair follows the jet trajectory and tends to split the jet into two streams. A smaller pair, rotating in an opposite sense, develops in the near wall region. Reported results include Mach number and volume fraction distributions in the cross plane, as well as jet penetration and mixing efficiency.

Davis, David O.↗
NASA NTRS1990

Improved Insert For Variable Mach Number

Nozzle insert lowers wind-tunnel mach number while maintaining excellent flow quality. Essential components of improved design include sonic first throat, expansion surface, variable boundary-layer bleed, insert itself, and existing, unchanged, contour of nozzle. Modification involves creation of secondary throat and critical addition of boundary-layer bleed path between insert and original tunnel wall. Enables quick change of mach number in existing facility at relatively low cost and requires no special contouring of existing nozzle. Represents simple and cost-effective method of altering mach number in any supersonic wind tunnel.

Puster, Richard L.↗
NASA NTRS2017

Stereo Photogrammetry Measurements of the Position and Attitude of a Nozzle-Plume/Shock-Wave Interaction Model in the NASA Ames 9- by 7-Ft Supersonic Wind Tunnel

Stereo photogrammetry was used to measure the position and attitude of a slender body of revolution during nozzle-plume/shock-wave interaction tests in the NASA Ames 9- by 7-Ft Supersonic Wind Tunnel. The model support system was designed to allow the model to be placed at many locations in the test section relative to a pressure rail on one sidewall. It included a streamwise traverse as well as a thin blade that offset the model axis from the sting axis. With these features the support system was more flexible than usual resulting in higher-than-usual uncertainty in the position and attitude of the model. Also contributing to this uncertainty were the absence of a balance, so corrections for sting deflections could not be applied, and the wings-vertical orientation of the model, which precluded using a gravity-based accelerometer to measure pitch angle. Therefore, stereo photogrammetry was chosen to provide independent measures of the model position and orientation. This paper describes the photogrammetry system and presents selected results from the test.

supersonic↗
NASA NTRS1976

Static and wind tunnel near-field/far field jet noise measurements from model scale single-flow baseline and suppressor nozzles. Volume 2: Forward speed effects

A model scale flight effects test was conducted in the 40 by 80 foot wind tunnel to investigate the effect of aircraft forward speed on single flow jet noise characteristics. The models tested included a 15.24 cm baseline round convergent nozzle, a 20-lobe and annular nozzle with and without lined ejector shroud, and a 57-tube nozzle with a lined ejector shroud. Nozzle operating conditions covered jet velocities from 412 to 640 m/s at a total temperature of 844 K. Wind tunnel speeds were varied from near zero to 91.5 m/s. Measurements were analyzed to (1) determine apparent jet noise source location including effects of ambient velocity; (2) verify a technique for extrapolating near field jet noise measurements into the far field; (3) determine flight effects in the near and far field for baseline and suppressor nozzles; and (4) establish the wind tunnel as a means of accurately defining flight effects for model nozzles and full scale engines.

Jaeck, C. L.↗