Search NASA⌕ Search

SEARCH · Search NASA

Results for “Waveform Parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Determination of Dimensionless Attenuation Coefficient in Shaped Resonators

The value of dimensionless attenuation coefficient is an important factor when numerically predicting high-amplitude acoustic waves in shaped resonators. Both the magnitude of the pressure waveform and the quality factor rely heavily on this dimensionless parameter. Previous authors have stated the values used, but have not completely explained their methods. This work fully describes the methodology used to determine this important parameter. Over a range of frequencies encompassing the fundamental resonance, the pressure waves were experimentally measured at each end of the shaped resonators. At the corresponding dimensionless acceleration, the numerical code modeled the acoustic waveforms generated in the resonator using various dimensionless attenuation coefficients. The dimensionless attenuation coefficient that most closely matched the pressure amplitudes and quality factors of the experimental and numerical results was determined to be the value to be used in subsequent studies.

Daniels, C.↗
DOE OSTI2023

An Explainable Machine-Learning Model for Compensatory Reserve Measurement: Methods for Feature Selection and the Effects of Subject Variability

Tracking vital signs accurately is critical for triaging a patient and ensuring timely therapeutic intervention. The patient’s status is often clouded by compensatory mechanisms that can mask injury severity. The compensatory reserve measurement (CRM) is a triaging tool derived from an arterial waveform that has been shown to allow for earlier detection of hemorrhagic shock. However, the deep-learning artificial neural networks developed for its estimation do not explain how specific arterial waveform elements lead to predicting CRM due to the large number of parameters needed to tune these models. Alternatively, we investigate how classical machine-learning models driven by specific features extracted from the arterial waveform can be used to estimate CRM. More than 50 features were extracted from human arterial blood pressure data sets collected during simulated hypovolemic shock resulting from exposure to progressive levels of lower body negative pressure. A bagged decision tree design using the ten most significant features was selected as optimal for CRM estimation. This resulted in an average root mean squared error in all test data of 0.171, similar to the error for a deep-learning CRM algorithm at 0.159. By separating the dataset into sub-groups based on the severity of simulated hypovolemic shock withstood, large subject variability was observed, and the key features identified for these sub-groups differed. This methodology could allow for the identification of unique features and machine-learning models to differentiate individuals with good compensatory mechanisms against hypovolemia from those that might be poor compensators, leading to improved triage of trauma patients and ultimately enhancing military and emergency medicine.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1977

Altimeter waveform software design

Techniques are described for preprocessing raw return waveform data from the GEOS-3 radar altimeter. Topics discussed include: (1) general altimeter data preprocessing to be done at the GEOS-3 Data Processing Center to correct altimeter waveform data for temperature calibrations, to convert between engineering and final data units and to convert telemetered parameter quantities to more appropriate final data distribution values: (2) time "tagging" of altimeter return waveform data quantities to compensate for various delays, misalignments and calculational intervals; (3) data processing procedures for use in estimating spacecraft attitude from altimeter waveform sampling gates; and (4) feasibility of use of a ground-based reflector or transponder to obtain in-flight calibration information on GEOS-3 altimeter performance.

Hayne, G. S.↗
DOE OSTI2019

Principles of Ion Selection, Alignment, and Focusing in Tandem Ion Mobility Implemented Using Structures for Lossless Ion Manipulations (SLIM)

Tandem ion mobility (IM) enables the characterization of subpopulations of ions from larger ensembles, including differences that cannot be resolved in a single dimension of IM. Tandem IM consists of at least two IM regions that are each separated by an ion selection region. In many implementations of tandem IM, ions eluting from a dimension of separation are filtered and immediately transferred to the subsequent dimension of separation (selection-only experiments). We recently reported a mode of operation in which ions eluting from a dimension are trapped prior to the subsequent dimension (selection-trapping experiments), which was implemented on an instrument constructed using the structures for lossless ion manipulations (SLIM) architecture. Here, we use a combination of experiments and trajectory simulations to characterize aspects of the selection, trapping, and separation processes underlying these modes of operation. For example, the actual temporal profile of filtered ions can be very similar to the width of the waveforms used for selection, but depending on experimental parameters, can differ by up to ± 500 μs. Experiments and simulations indicate that ions in selection-trapping experiments can be spatially focused between dimensions, which removes the broadening that occurred during the preceding dimension. During focusing, individual ions are thermalized, which aligns and establishes common initial conditions for the subsequent dimension. Therefore, selection-trapping experiments appear to offer significant advantages relative to selection-only experiments, which we anticipate will become more pronounced in future experiments that make use of longer IM separations, additional dimensions of analysis, and the outcomes of this study. .

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

SKS Polarization Anomalies Due to the Coriolis Force

The Earth’s Coriolis force has been well–known to impact surface waves and normal modes, which is essential to accurately interpret these waves. However, the Coriolis force on body waves has been assumed to be negligible and mostly ignored. It has been previously shown that the Coriolis force impacts polarizations of shear waves, whereas the wavefronts remain unaffected. We expand on the potential influences of Earth’s Coriolis force on shear–wave polarization measurements by conducting 3D numerical simulations for elastic waves generated by earthquake and explosive sources in a radially symmetric, and 3D mantle and crustal models. The Coriolis force can produce polarization anomalies of mantle shear waves up to 7° and core phases, such as SKS and SKKS, up to 4°. Uncorrected shear–wave polarizations due to the Coriolis force can cause an additional source of error (5°–10° in fast direction, and 0.2–0.3 s delay time depending on the method and seismic phase), inaccurate interpretation of station misalignments, and imprecise estimates of the core–mantle boundary topography. We show how to correct for the Coriolis force on teleseismic shear waves using 1D ray tracing for well–isolated phases. Here, we recommend the use of full waveform simulations to accurately account for earthquake sources parameters, poorly isolated phases that could include interfering phase arrivals within the measurement time window, and the effect of the Coriolis force on the polarizations of shear waves.

58 GEOSCIENCES↗
DOE OSTI2016

Identifying Isotropic Events using an Improved Regional Moment Tensor Inversion Technique

Research was carried out investigating the feasibility of using a regional distance seismic waveform moment tensor inverse procedure to estimate source parameters of nuclear explosions and to use the source inversion results to develop a source-type discrimination capability. The results of the research indicate that it is possible to robustly determine the seismic moment tensor of nuclear explosions, and when compared to natural seismicity in the context of the a Hudson et al. (1989) source-type diagram they are found to separate from populations of earthquakes and underground cavity collapse seismic sources.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS1987

Signal averaging technique for noninvasive recording of late potentials in patients with coronary artery disease

An advanced non invasive signal averaging technique was used to detect late potentials in two groups of patients: Group A (24 patients) with coronary artery disease (CAD) and without sustained ventricular tachycardia (VT) and Group B (8 patients) with CAD and sustained VT. Recorded analog data were digitized and aligned using a cross correlation function with fast Fourier transform schema, averaged and band pass filtered between 60 and 200 Hz with a non-recursive digital filter. Averaged filtered waveforms were analyzed by computer program for 3 parameters: (1) filtered QRS (fQRS) duration (2) interval between the peak of the R wave peak and the end of fQRS (R-LP) (3) RMS value of last 40 msec of fQRS (RMS). Significant change was found between Groups A and B in fQRS (101 -/+ 13 msec vs 123 -/+ 15 msec; p < .0005) and in R-LP vs 52 -/+ 11 msec vs 71-/+18 msec, p <.002). We conclude that (1) the use of a cross correlation triggering method and non-recursive digital filter enables a reliable recording of late potentials from the body surface; (2) fQRS and R-LP durations are sensitive indicators of CAD patients susceptible to VT.

NASA Discipline Cardiopulmonary↗
NASA NTRS2011

Polarimetric, Two-Color, Photon-Counting Laser Altimeter Measurements of Forest Canopy Structure

Laser altimeter measurements of forest stands with distinct structures and compositions have been acquired at 532 nm (green) and 1064 nm (near-infrared) wavelengths and parallel and perpendicular polarization states using the Slope Imaging Multi-polarization Photon Counting Lidar (SIMPL). The micropulse, single photon ranging measurement approach employed by SIMPL provides canopy structure measurements with high vertical and spatial resolution. Using a height distribution analysis method adapted from conventional, 1064 nm, full-waveform lidar remote sensing, the sensitivity of two parameters commonly used for above-ground biomass estimation are compared as a function of wavelength. The results for the height of median energy (HOME) and canopy cover are for the most part very similar, indicating biomass estimations using lidars operating at green and near-infrared wavelengths will yield comparable estimates. The expected detection of increasing depolarization with depth into the canopies due to volume multiple-scattering was not observed, possibly due to the small laser footprint and the small detector field of view used in the SIMPL instrument. The results of this work provide pathfinder information for NASA's ICESat-2 mission that will employ a 532 nm, micropulse, photon counting laser altimeter.

Harding, David J.↗
NASA NTRSDate not supplied

An Artificial Neural Network Approach to Predict Rotor-Airframe Acoustic Waveforms

A surrogate artificial neural network/machine learning model was developed to predict the acoustic interaction for a fixed-pitch rotor in proximity to a downstream cylindrical airframe typical of small Unmanned Aerial System (sUAS) platforms. The model was trained to predict the acoustic waveform under representative hover conditions as a function of rotational speed, airframe proximity, and observer angle. Training data were acquired in an anechoic chamber on both isolated rotors and rotor-airframe configurations. Acoustic amplitude and phase of the revolution-averaged interaction were predicted, which required up to 25 harmonics to capture the impulse event caused by the blade’s approach and departure from the airframe. Prediction performance showed, on average, that the models could estimate the acoustic amplitude and phase over the relevant harmonics for unseen conditions with 86% and 75% accuracy, respectively, enabling a time domain reconstruction of the waveform for the range of geometric and flow parameters tested.

acoustics↗
NASA NTRSDate not supplied

An Artificial Neural Network Approach to Predict Rotor-Airframe Acoustic Waveforms

A surrogate artificial neural network/machine learning model was developed to predict the acoustic interaction for a fixed-pitch rotor in proximity to a downstream cylindrical airframe typical of small Unmanned Aerial System (sUAS) platforms. The model was trained to predict the acoustic waveform under representative hover conditions as a function of rotational speed, airframe proximity, and observer angle. Training data were acquired in an anechoic chamber on both isolated rotors and rotor-airframe configurations. Acoustic amplitude and phase of the revolution-averaged interaction were predicted, which required up to 25 harmonics to capture the impulse event caused by the blade’s approach and departure from the airframe. Prediction performance showed, on average, that the models could estimate the acoustic amplitude and phase over the relevant harmonics for unseen conditions with 86% and 75% accuracy, respectively, enabling a time domain reconstruction of the waveform for the range of geometric and flow parameters tested.

acoustics↗
DOE OSTI2020

Evaluation of Waveform Profiles for Traveling Wave Ion Mobility Separations in Structures for Lossless Ion Manipulations

Structures for lossless ion manipulations (SLIM) have recently enabled a powerful implementation of traveling wave ion mobility spectrometry (TWIMS) for ultra-high resolution separations. However, optimization of experimental parameters remains challenging. Most TWIMS separations have utilized square-shaped waveforms applied by time-dependent voltage stepping across a repeating sets of electrodes; however, alternative waveforms may provide further improvements to resolution. In this work, we characterize five waveforms (including square and sine) in terms of their transmission efficiency, IMS resolution, and resolving power, and explore the effects of TW amplitude and speed on the performance of each. We found, consistent with previous work, separations were generally improved with higher TW amplitudes, moderately improved by lower speeds (limited by ion ‘surfing’ with the waves), and found decreases in signal intensity at the extremes of operating conditions. The triangle and asymmetric ‘ramp forward’ shaped profiles were found to provide modestly greater resolution and resolving power, an observation we tentatively attribute to their relatively uniform fields and minimal low-field regions.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2015

Gravitational Waves: Search Results, Data Analysis and Parameter Estimation. Amaldi 10 Parallel Session C2

The Amaldi 10 Parallel Session C2 on gravitational wave(GW) search results, data analysis and parameter estimation included three lively sessions of lectures by 13 presenters, and 34 posters. The talks and posters covered a huge range of material, including results and analysis techniques for ground-based GW detectors, targeting anticipated signals from different astrophysical sources: compact binary inspiral, merger and ringdown; GW bursts from intermediate mass binary black hole mergers, cosmic string cusps, core-collapse supernovae, and other unmodeled sources; continuous waves from spinning neutron stars; and a stochastic GW background. There was considerable emphasis on Bayesian techniques for estimating the parameters of coalescing compact binary systems from the gravitational waveforms extracted from the data from the advanced detector network. This included methods to distinguish deviations of the signals from what is expected in the context of General Relativity.

Tests of general relativity↗
DOE OSTI2019

Acoustic Source Parameters and Yield Estimation for SPE Phase I and Forensics Surface Events

Acoustic signals recorded for explosive events are sensitive to pressure changes in the source region and can provide valuable information about source characteristics. However, acoustic wave propagation in the atmosphere is significantly affected by weather conditions (e.g., temperature, pressure, and wind), and the atmospheric propagation effects should be considered properly to obtain accurate source information. Acoustic waveform inversion method has been increasing useful to determine quantitative source parameters by incorporating accurate Green’s function into the inversion and by effectively removing propagation path effects. This paper reviews recent progress in the acoustic waveform inversion and its application to explosion yield/emplacement (e.g., height-of-burst or depth-of-burial) estimation. The inversion method is applied to acoustic signals recorded during Source Physics Experiment Phase I and Forensics Surface Event conducted at the Nevada National Security Site (NNSS). Inverted acoustic source strengths are related to the explosion yield and emplacement, and their estimation uncertainties are explored by the comparison with the ground-truth data.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
NASA NTRS2009

Measuring Massive Black Hole Binaries with LISA

The coalescence of two massive black holes produces gravitational waves (GWs) which can be detected by the space-based detector LISA. By measuring these waves, LISA can determine the various parameters which characterize the source. Measurements of the black hole masses and spins will provide information about the growth of black holes and their host galaxies over time. Measurements of a source's sky position and distance may help astronomers identify an electromagnetic counterpart to the GW event. The counterpart's redshift, combined with the GW-measured luminosity distance, can then be used to measure the Hubble constant and the dark energy parameter $w$. Because the potential science output is so high, it is useful to know in advance how well LISA can measure source parameters for a wide range of binaries. We calculate expected parameter estimation errors using the well-known Fisher matrix method. Our waveform model includes the physics of spin precession, as well as subleading harmonics. When these higher-order effects are not included, strong degeneracies between some parameters cause them to be poorly determined by a GW measurement. When precession and subleading harmonics are properly included, the degeneracies are broken, reducing parameter errors by one to several orders of magnitude.

Lang, Ryan N.↗
DOE OSTI2024

NEON AOP Survey of Upper East River CO Watersheds: Waveform LiDAR Binary Data

The waveform Light Detection and Ranging (LiDAR) data in this package were generated through a National Ecological Observatory Network Airborne Observation Platform (NEON AOP) acquisition over watersheds of interest surrounding Crested Butte, Colorado. The remote sensing imagery acquired by the NEON AOP supports an interdisciplinary project on hydrology, biogeochemistry, and ecosystem functioning in a snow-dominated headwater environment. These waveform LiDAR data enable spatially continuous estimation of vegetation structure parameters to facilitate analyses of the major environmental drivers of structural and compositional variability. The package contains 97 compressed file archives in 7-zip (.7z) format, each corresponding to one acquisition flightpath. Within each .7z archive is a set of constituent files describing properties of the LiDAR waveforms, such as return intensity, geolocation, outgoing pulse and other behavior of the sensor and signals. Once downloaded, the files must first be unzipped using the widely distributed command-line software utility 7z, using the command '7z x \[filename\].7z \[target_directory\]'. All files within the .7z archives can be opened in IDL, MatLab, or the open-source R statistical computing environment. Further details about the data package are in the attached user guide (neon_aop_crbu_waveformlidar_userguide.pdf). This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

2018 NEON and 2025 CHESS Campaigns↗
NASA NTRS1985

Earthquake source mechanisms from body-waveform inversion and intraplate tectonics in the northern Indian Ocean

Double-couple point-source parameters for 11 of the largest intraplate earthquakes in the northern Indian Ocean during the last 20 years were determined from a formal inversion of the long-period P and SH waveforms. Two major intraplate tectonic provinces are distinguished in the northern Indian Ocean. The plate-wide stress pattern found and the high level of intraplate seismicity are probably the results of substantial resistance, along the Himalayan continental collision zone, to the continued northward motion of the western portion of the Indian plate.

Bergman, E. A.↗
NASA NTRS1991

A study of electric power transmission lines for use on the lunar surface

Analytical models have been developed to study the operating characteristics of electrical transmission lines for use on the lunar surface. Important design considerations for a transmission line operating on the lunar surface are mass, temperature, and efficiency. Transmission line parameters which impact these considerations include voltage, power loss, and waveform. The electrical and thermal models developed are used to calculate transmission line mass, size, and temperature as a function of voltage, geometry, waveform, location, and efficiency. The analyses include ac and dc for above and below ground operation. Geometries studied include a vacuum-insulated, two-wire transmission line and a solid-dielectric insulated, coaxial transmission line. A brief discussion of design considerations and the models developed is followed by results for parameter studies for both dc and ac transmission lines.

Gordon, Lloyd B.↗
NASA NTRS1986

Measuring Acoustic-Radiation Stresses in Materials

System measures nonlinearity parameters of materials. Uses static strain generated by acoustic wave propagating in material. Since static strain is effectively "dc" component of waveform distortion, problems associated with phase-cancellation artifacts disappear. Further, sign of nonlinearity parameter obtained by simple inspection of measured signal polarity. These features make this system very amenable to use in field. System expected to become standard for acoustic-radiation-stress measurements for solids and liquids and for characterization of material properties related to strength and residual or applied stresses. Also expected to become standard for transducer calibration.

Cantrell, John H.↗