Search NASA⌕ Search

SEARCH · Search NASA

Results for “atmosphere: surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Sensitivity of Simulated Polar Climate to Improved Partitioning of Spectral Solar Irradiance Between Visible and Near‐Infrared Bands

The solar radiative processes that contribute to Earth's surface and atmospheric energy budgets are strongly dependent on wavelength. For example, snow and water vapor become more absorptive as incident radiation shifts from visible (VIS) to near-infrared (NIR) wavelengths. Some earth system models (ESMs) aggregate solar radiation into just two bands (VIS and NIR) partitioned at 0.7 μm for transmission between the atmospheric and surface components. In the widely used radiative transfer model RRTMG_SW this partition is near the center of the overlap spectral band spanning 0.625–0.778 μm, whose flux is often approximated as being evenly divided between the VIS and NIR surface bands. Using a hyperspectral radiative transfer model, we show that the fractional downwelling surface flux within the overlap band is usually distributed about 55.5%:44.5% VIS:NIR. This improved approximation shifts as much as 4.27 W m −2 from the NIR to the VIS band, leading to an instantaneous decrease in surface absorption of up to 0.91 W m −2 over snow-covered surfaces. Century-long fully coupled ESM simulations show surface absorption over snow decreases by over 1.6 W m −2 . The coupled response in sea ice regions amplifies the initial forcing ten-fold, and increases seasonal sea ice area by up to 4.9%. These results highlight the importance of accurately representing the spectral distribution of solar radiation in the cryosphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Short‐Term Hourly Weather Forecasting Using PredRNN With Image Preprocessing

Global weather forecast models are vital tools with numerous applications, including public safety, agriculture, and transportation. Recent advancements in artificial intelligence (AI) and deep learning (DL) have shown the potential to enhance weather forecasting accuracy and speed. In this study, we developed a short-term hourly weather forecast framework with a wavelet transform function for data preprocessing and a spatiotemporal DL model, PredRNN, for predicting five surface atmospheric variables, including wind speed and direction, mean sea level pressure (MSLP), temperature, and precipitation. The framework demonstrated promising results. It produces global forecasts at 0.25° (∼25 km) with a 1-day lead time RMSE of 1.8 m/s for wind components, 180 Pa for MSLP, and 1.8 K for temperature. Although our model does not surpass state-of-the-art AI weather forecast models across all metrics, it outperforms these models in precipitation forecasting and wind prediction at short lead times and achieves comparable accuracy for MSLP. Its native hourly forecasting capability, together with training on widely accessible GPU hardware, contributes meaningfully to the advancement of accessible DL weather forecasting methods. Our work highlights the importance of integrating temporal components and data transformation techniques to improve the predictability and accuracy of weather forecasts.

Tran, Hoang [Pacific Northwest National Laboratory↗
DOE OSTI2025

Performance of Convection-Permitting and Convection-Parameterized Models in Reproducing the Extreme Precipitation Intensity Relationship with Surface Conditions

Here, this study investigates the warm-season extreme precipitation–temperature scaling relationship in CONUS404, a convection-permitting (4 km) Weather Research and Forecasting (WRF) Model simulation over the conterminous United States for the past four decades, and compares it with the WRF-Thermodynamic Global Warming (WRF-TGW) historical simulation at a coarser resolution (12 km) using parameterized convection. We also analyze the NCEP stage IV and NASA Integrated Multi-satellitE Retrievals for the Global Precipitation Measurement (IMERG) datasets as observational benchmarks. We examine how extreme precipitation intensity (EPI) varies with temperature and saturation deficit over representative regions based on hourly data. The stage IV and IMERG data show a similar pattern of EPI variation with temperature and saturation deficit, except that the EPI peak is lower in IMERG than in stage IV. Under dry and hot conditions, EPI decreases too rapidly with elevated saturation deficit in both CONUS404 and WRF-TGW compared to observations, but the performance of CONUS404 is superior to WRF-TGW. When the near-surface atmosphere is saturated or close to saturated, both CONUS404 and WRF-TGW produce higher peak values of EPI relative to the observational references; IMERG exhibits scaling rates close to the Clausius–Clapeyron (C–C) relationship, while CONUS404, WRF-TGW, and stage IV all demonstrate super-C–C scaling behaviors. Despite marked warming over the past four decades, in both CONUS404 and WRF-TGW, the scaling relationship between EPI and temperature in a saturated atmosphere remains stable and robust. This indicates a strong potential for the EPI–temperature scaling rate under saturation to be used as an emergent constraint in reducing uncertainties of future extreme precipitation projection.

Atmosphere↗
DOE OSTI2025

Observations of Coastal Wind Momentum Flux: Dependence on Fetch and Waves with Comparisons to COARE

Here, using observations from the Martha’s Vineyard Coastal Observatory, this paper investigates how momentum flux in the marine atmospheric surface layer over the coastal ocean varies with fetch, wave age, and wave slope and assesses the performance of the COARE 3.5 bulk parameterization. Long-fetch (at least 300 km) and short-fetch (3–6 km away from land) conditions have very similar momentum flux, with the latter being just 15% higher. The COARE 3.5 wind speed–dependent formulation closely matches the observations. The sea state dependence of wave age and wave slope is analyzed by considering both peak frequency and mean frequency in a wave spectrum. The slope of regression lines between normalized roughness and wave age is sensitive to wind speed ranges and the scatter of momentum flux, potentially explaining why earlier studies did not find a universal formula to characterize the wave dependence. Although the observed momentum flux exhibits an obvious dependence on wave age, a robust quadratic fit between momentum flux and the 10-m neutral wind speed exists only for young waves. For the short-fetch conditions, the momentum flux does not increase as wave slope increases. This may be because waves generated by local wind are still weak and swell that propagates from other areas dominates the wave spectra. In other words, the wave slope computed by considering the spectra does not properly reflect the local wind–wave interaction.

Air-sea interaction↗
DOE OSTI2024

PM2.5 Active Aerosol Collection Field Campaign Report

The long-range transport of aerosols can affect local air quality as well as contribute elements and constituents to mountain watersheds that have potentially positive (e.g., nitrate) and negative (e.g., heavy metals) effects to the local ecosystem. Isotopic analysis of aerosols can be a powerful tool for deconvolving the relative contributions of far-distant and local sources to the composition of collected aerosols. Our field campaign involved the week-long collection of PM2.5 (i.e., particulate matter with an aerodynamic diameter of about 2.5 microns) aerosols on filters, which were returned to the laboratories at Lawrence Berkeley National Laboratory (LBNL) for analysis. The sampling sites were located at the Gothic, Colorado Surface Atmosphere Integrated Field Laboratory (SAIL) Atmospheric Radiation Measurement (ARM) and the Mt. Crested Butte, Colorado SAIL ARM sites. The original intention was to measure the lead (Pb) and strontium (Sr) isotopic compositions of the collected aerosols at high precision to provide constraints on source portioning and attribution, as well as analyze the chemical compositions and nitrogen and carbon isotopic compositions. However, severe blank issues arose that prevented the planned isotopic analyses of Sr, Pb, C, and N and severely affected the analyses of the bulk chemical compositions of the collected aerosols, resulting in the failure of the study. The issue is described in Section 2.0.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Southwest Regional Partnership on Carbon Sequestration: Phase III (Final Scientific/Technical Report)

The Southwest Regional Partnership on Carbon Sequestration (SWP) is one of 7 regional partnerships formed in 2003 under the U.S. Department of Energy’s (DOE) Regional Carbon Sequestration Partnerships (RCSPs) initiative. The overall purpose of the initiative was to help determine and implement the technology, infrastructure, and regulations most appropriate to promote carbon storage in different regions of the country. Covering Arizona, Colorado, New Mexico, Oklahoma, Utah, and parts of Texas, Wyoming, and Kansas, the SWP evaluated regional carbon storage and utilization potential and focused on technologies and sites that could complement the region’s strong position in energy production. The project progressed through three phases: • Phase I (2003–2005): Characterized regional geologic formations and CO 2 sources, assessed sequestration potential, and identified pilot test sites. • Phase II (2005–2013): Conducted small-scale field tests to validate sequestration methods, including geologic and terrestrial projects. • Phase III (2008–2022): Demonstrated large-scale CO 2 injection at a commercial oil field to test monitoring, verification, and long-term storage strategies. This report covers Phase III. The final project site, the Farnsworth Unit (FWU) in Texas, provided real-world testing of reservoir characterization, monitoring, and risk evaluation tools and processes that could be used in any commercial scale carbon capture, utilization, and storage (CCUS) project. Extensive data collection and analysis helped refine best practices for reservoir characterization, injection monitoring, and storage verification. The SWP contributed to national databases, DOE best practice manuals, and regional geological assessments to support future sequestration efforts. Key lessons learned include the importance of robust data management, strategic site selection, regulatory navigation, and effective industry collaboration. The project’s findings will inform ongoing and future carbon storage initiatives. Task 1 (Regional Characterization) • The SWP continued to participate in national outreach efforts and NATCARB. • The SWP evaluated multiple potential sites before selecting the FWU as the primary field test location. Task 2 (Public Outreach and Education) • The SWP contributed to national databases, DOE best practice manuals, and regional geological assessments to support future sequestration efforts. Task 3 (Permitting and Regulatory Compliance) • The SWP ensured compliance with federal and state regulations, including National Environmental Policy Act (NEPA) requirements. • The SWP obtained all necessary permits for drilling, injection, and monitoring activities. Task 4 (Site Characterization and Planning) • The SWP developed work plans for four key activities: characterization, simulation, monitoring and verification, and risk evaluation. • The SWP collected and synthesized legacy data from multiple sources to build initial static geological models and dynamic reservoir models demonstrating project feasibility. • The SWP conducted an initial risk evaluation and developed mitigation plans. Task 5 (Field Operations and Data Collection) • The SWP drilled, logged, and cored three characterization wells to gather critical subsurface data. • The SWP conducted multiple geophysical surveys, including 3D seismic, crosswell seismic, and vertical seismic profiling, to improve reservoir characterization. Task 6 (Monitoring and Verification) • The SWP performed extensive geological characterization using data from characterization wells and seismic surveys. • The SWP established a surface monitoring network to track CO 2 flux in soil gas, groundwater chemistry, and near-surface atmospheric CO 2 levels. • The SWP built and refined reservoir models to study the effects of relative permeability on simulation behavior and improve calibration with experimental data. Task 7 (Risk Assessment and Model Refinement) • The SWP conducted multiple studies to evaluate reservoir integrity, predict CO 2 plume behavior and improve predictive modeling capabilities. • The SWP refined geological models and used them to enhance the accuracy of simulation models. • The SWP continued quantitative risk assessment of top-ranked risks and strengthened the link between qualitative and quantitative risk methodologies.

02 PETROLEUM↗
DOE OSTI2024

Investigating spatial variability of aerosol, cloud condensation nuclei, and ice nucleating particles in mountainous terrain

The ASR-supported Surface Atmosphere Integrated field Laboratory (SAIL) in the East River Watershed (ERW) of the Upper Colorado River Basin in southwestern Colorado ran from fall 2021 to spring 2023. Two monitoring sites were deployed in the East River Watershed as part of SAIL. The two sites were the Aerosol Observation System (AOS) located on Crested Butte Ski Mountain, and the ARM Mobile Facility (AMF-2), located at the Rocky Mountain Biological Laboratory in Gothic, Colorado. To gain a more comprehensive understanding of aerosols in complex, mountainous terrain, Handix Scientific deployed SAIL-Net, a distributed network of six measurement nodes spanning the domain of the SAIL research area from October 2021 to July 2023. Each node measured aerosol particles between 140 nm and 3.4 μm in diameter using a small particle counter (POPS, (Gao et al., 2016)), CNN using a miniature CCN counter (CloudPuck), and INP using the Time-Resolved Aerosol Filter Sampler (TRAPS, Creamean et al. (2018)). Our approach was similar to other studies that aimed to better characterize and understand aerosols and gas-phase pollutants using networks of lower-cost sensors (Caubel et al., 2019; Kelly et al., 2021; Asher et al., 2022). Such studies have identified neighborhood-level variations in pollutant concentrations (Schneider et al., 2017; Popoola et al., 2018; Caubel et al., 2019). Small-scale variations such as this are poorly represented in models and poorly measured by a single monitoring system (Caubel et al., 2019). Previous work has shown the representation error (the ability of measurements to represent a larger area) increases with complex orography, leading to decreases in model accuracy (Schutgens et al., 2017). The overall goal of SAIL-Net was to improve our understanding of the variability of aerosol in ERW, thus increasing our knowledge of aerosol-cloud interactions in this region and informing the usefulness of distributed networks of measurements for future studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Frequency and Characteristics of Inland Advecting Sea Breezes in the Southeast United States

Sea breezes have been observed to move inland over 100 km. These airmasses can be markedly different from regional airmasses, creating a shallow layer with differences in humidity, wind, temperature and aerosol characteristics. To understand their influence on boundary layer and cloud development on subsequent days, we identify their frequency and characteristics. We visually identified sea breeze fronts on radar passing over the Savannah River Site (SRS) between March and October during 2015–2019. The SRS is ~150 km from the nearest coastal location; therefore, our detection suggests further inland penetration. We also identified periods when sea breeze fronts may have passed but were not visually observed on radar due to the shallow sea breeze airmass remaining below the radar beam elevation that ranges between approximately 1–8 km depending on the beam angle and radar source (Columbia, SC or Charleston, SC). Near-surface atmospheric measurements indicate that the dew point temperature increases, the air temperature decreases, the variation in wind direction decreases and the aerosol size increases after sea breeze frontal passage. A synoptic classification procedure also identified that inland moving sea breezes are more commonly observed when the synoptic conditions include weak to moderate offshore winds with an average of 35 inland sea breezes occurring each year, focused primarily in the months of April, May and June.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Neutrino-driven Winds in Three-dimensional Core-collapse Supernova Simulations

Abstract In this paper, we analyze the neutrino-driven winds that emerge in 12 unprecedentedly long-duration 3D core-collapse supernova simulations done using the code F ornax . The 12 models cover progenitors with zero-age main-sequence mass between 9 and 60 solar masses. In all our models, we see transonic outflows that are at least 2 times as fast as the surrounding ejecta and that originate generically from a proto−neutron star surface atmosphere that is turbulent and rotating. We find that winds are common features of 3D simulations, even if there is anisotropic early infall. We find that the basic dynamical properties of 3D winds behave qualitatively similarly to those inferred in the past using simpler 1D models, but that the shape of the emergent wind can be deformed, very aspherical, and channeled by its environment. The thermal properties of winds for less massive progenitors very approximately recapitulate the 1D stationary solutions, while for more massive progenitors they deviate significantly owing to aspherical accretion. The Y e temporal evolution in winds is stochastic, and there can be some neutron-rich phases. Though no strong r -process is seen in any model, a weak r -process can be produced, and isotopes up to 90 Zr are synthesized in some models. Finally, we find that there is at most a few percent of a solar mass in the integrated wind component, while the energy carried by the wind itself can be as much as 10%–20% of the total explosion energy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Quantification of regional net CO 2 flux errors in the Orbiting Carbon Observatory-2 (OCO-2) v10 model intercomparison project (MIP) ensemble using airborne measurements

Inverse model intercomparison projects (MIPs) provide a chance to assess the uncertainties in inversion estimates arising from various sources. However, accurately quantifying ensemble CO 2 flux errors remains challenging and often relies on the ensemble spread. This study proposes a method for quantifying the errors in regional net surface–atmosphere CO 2 flux estimates from models taken from the Orbiting Carbon Observatory-2 (OCO-2) v10 MIP by using independent airborne CO 2 measurements for the period 2015–2017. We first calculate the root mean square error (RMSE) between the ensemble mean of posterior CO 2 concentrations and airborne observations and then isolate the CO 2 concentration errors caused solely by the ensemble mean of posterior net fluxes by subtracting the observation, representation, and transport errors from seven regions. Our analysis reveals that the flux errors projected onto CO 2 space account for 55 %–85 % of the regional average RMSE over the 3 years, ranging from 0.88 to 1.91 ppm. In five regions, the error estimates based on observations exceed those computed from the ensemble spread of posterior fluxes by a factor of 1.33–1.93, implying an underestimation of the actual flux errors, while their magnitudes are comparable in two regions. The adjoint sensitivity analysis identifies that the underestimation of flux errors is prominent where the magnitudes of fossil fuel emissions exceed those of terrestrial-biosphere fluxes by a factor of 3–31 over the 3 years. This suggests the presence of systematic biases in the inversion estimates associated with errors in the prescribed fossil fuel emissions common to all models. Our study emphasizes the value of airborne measurements for quantifying regional errors in ensemble net CO 2 flux estimates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Airborne flux measurements of ammonia over the southern Great Plains using chemical ionization mass spectrometry

Abstract. Ammonia (NH3) is an abundant trace gas in the atmosphere and an important player in atmospheric chemistry, aerosol formation and the atmosphere–surface exchange of nitrogen. The accurate determination of NH3 emission rates remains a challenge, partly due to the propensity of NH3 to interact with instrument surfaces, leading to high detection limits and slow response times. In this paper, we present a new method for quantifying ambient NH3, using chemical ionization mass spectrometry (CIMS) with deuterated benzene cations as reagents. The setup aimed at limiting sample–surface interactions and achieved a 1σ precision of 10–20 pptv and an immediate 1/e response rate of < 0.4 s, which compares favorably to the existing state of the art. The sensitivity exhibited an inverse humidity dependence, in particular in relatively dry conditions. Background of up to 10 % of the total signal required consideration as well, as it responded on the order of a few minutes. To showcase the method's capabilities, we quantified NH3 mixing ratios from measurements obtained during deployment on a Gulfstream I aircraft during the HI-SCALE (Holistic Interactions of Shallow Clouds, Aerosols, and Land-Ecosystems) field campaign in rural Oklahoma during May 2016. Typical mixing ratios were 1–10 parts per billion by volume (ppbv) for the boundary layer and 0.1–1 ppbv in the lower free troposphere. Sharp plumes of up to tens of ppbv of NH3 were encountered as well. We identified two of their sources as a large fertilizer plant and a cattle farm, and our mixing ratio measurements yielded upper bounds of 350 ± 50 and 0.6 kg NH3 h−1 for their respective momentary source rates. The fast response of the CIMS also allowed us to derive vertical NH3 fluxes within the turbulent boundary layer via eddy covariance, for which we chiefly used the continuous wavelet transform technique. As expected for a region dominated by agriculture, we observed predominantly upward fluxes, implying net NH3 emissions from the surface. The corresponding analysis focused on the most suitable flight, which contained two straight-and-level legs at ∼ 300 m above ground. We derived NH3 fluxes between 1 and 11 mol km−2 h−1 for these legs, at an effective spatial resolution of 1–2 km. The analysis demonstrated how flux measurements benefit from suitably arranged flight tracks with sufficiently long straight-and-level legs, and it explores the detrimental effect of measurement discontinuities. Following flux footprint estimations, comparison to the NH3 area emissions inventory provided by the U.S. Environmental Protection Agency indicated overall agreement but also the absence of some sources, for instance the identified cattle farm. Our study concludes that high-precision CIMS measurements are a powerful tool for in situ measurements of ambient NH3 mixing ratios, and even allow for the airborne mapping of the air–surface exchange of NH3.

58 GEOSCIENCES↗
DOE OSTI2022

GUC CSU X-Band Precipitation Radar Plan Position Indicator data processed with Corrected Moments in Antenna Coordinates

For the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign, Corrected Moments in Antenna Coordinates (CMAC) is a set of algorithms and code that does corrections to CSU X-Precipitation Radar PPI data. Additionally, CMAC adds calculations of derived snowfall rates to the original data in order to provide precipitation estimates for the campaign.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

GUC CSU X-Band Precipitation Extracted Radar Columns and In-Situ Sensors (RadCLss)

For the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign, a scanning X-Band dual-polarimetric radar provided by Colorado State University (CSU) was deployed to estimate precipitation within the Upper Colorado River Basin. In order to evaluate precipitation estimates from the CSU X-Band Radar (XPRECIPRADAR), radar columns are extracted above field sites of interest to the SAIL campaign. These radar columns are then matched to in-situ sensors at these locations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

TRAC Time Tags of individual particle samples collected for microscopy analysis at RMBL [AMF2] from June 2023 to August 2023

The dataset presents the time tags of individual particle samples collected on microscopy substrates during the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign in Gothic, CO. A Time Resolved Aerosol Collector was deployed at the Rocky Mountain Biological Laboratory, 200 m north of AMF2 to collect ambient particles. The instrument inlet was placed 5 m above ground level. Particles are deposited on 400 mesh copper carbon-B film TEM grids (Ted Pella 01814-F). Samples are sealed and currently stored at Purdue University. A subset of the samples can be shared. Please contact dataset authors for more information. The dataset reports the sample start times in UTC and MST along with the sample ID, used to guide its location and retrieval from the storage plate. TRAC sampling started on June 17, 2023, and ended on July 31, 2023.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Merged aerosol size distribution from SMPS and OPC for SAIL

This dataset contains merged aerosol number size distribution data for the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign. The merged size distribution data were constructed by combining measurements from a scanning-mobility particle sizer (SMPS) and an optical particle counter (OPC), covering a size range of 0.01–35 µm. The merging methodology follows the approach described by Hand and Kreidenweis (2002) and Marinescu et al. (2019). All aerosol data from the ARM archive were corrected to standard temperature (273.15 K) and pressure (101.3 kPa).

merged size distribution↗
DOE OSTI2025

Source apportionment of aerosols at the White River IMPROVE site near the SAIL site

This data set contains source apportionment results at the White River IMPROVE site (39.1536, -106.8209), which is about 30 km north of the Surface Atmosphere Integrated Field Laboratory (SAIL) Campaign site. The IMPROVE network (Malm et al. 1994) collected 24-hour aerosol filter samples every three days over several decades at this site. Chemical concentrations in the PM2.5 fraction of 19 elements (Al, As, Br, Ca, Cl, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Se, Si, Ti, V, and Zn), along with nitrate, sulfate, elemental carbon (EC), organic carbon (OC), and calculated coarse mass concentrations (PM10−PM2.5 mass concentrations), from 2014 to 2023, were used as input for the PMF analysis. PMF was performed using EPA PMF 5.0 (Norris et al. 2014). A five-factor solution was chosen as the optimal solution. These factors were identified as coarse dust, fine dust, biomass burning, sulfate-dominated, and nitrate-dominated sources. This data set is useful for understanding aerosol sources and their long-term variability near this region.

biomass burning↗
DOE OSTI2026

Ice-nucleating particles (INPs) concentrations from SAIL-Net

This data set contains ice-nucleating particle (INP) concentration spectra collected during the SAIL-Net sampling period, which complemented the Surface Atmosphere Integrated Field Laboratory (SAIL) campaign in the East River watershed near Crested Butte, Colorado. SAIL-Net was a distributed aerosol measurement network designed to investigate aerosol variability across complex mountainous terrain. The data set includes samples from multiple SAIL-Net sites, including AOS, Gothic, Snodgrass, Pumphouse, Irwin, and Top. INP concentrations are reported as a function of freezing temperature, together with confidence limits, sampling times, site location, elevation, sampled air volume, and treatment information. These data provide an analysis-ready record of the INPs across the SAIL-Net network.

activation temperature↗
DOE OSTI2023

Climatology and surface impacts of atmospheric rivers on West Antarctica

Abstract. Atmospheric rivers (ARs) transport large amounts of moisture from the mid- to high-latitudes and they are a primary driver of the most extreme snowfall events, along with surface melting, in Antarctica. In this study, we characterize the climatology and surface impacts of ARs on West Antarctica, focusing on the Amundsen Sea Embayment and Marie Byrd Land. First, we develop a climatology of ARs in this region, using an Antarctic-specific AR detection tool combined with the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2) and the European Centre for Medium-Range Weather Forecasts (ECMWF) Reanalysis v5 (ERA5) atmospheric reanalyses. We find that while ARs are infrequent (occurring 3 % of the time), they cause intense precipitation in short periods of time and account for 11 % of the annual surface accumulation. They are driven by the coupling of a blocking high over the Antarctic Peninsula with a low-pressure system known as the Amundsen Sea Low. Next, we use observations from automatic weather stations on Thwaites Eastern Ice Shelf with the firn model SNOWPACK and interferometric reflectometry (IR) to examine a case study of three ARs that made landfall in rapid succession from 2 to 8 February 2020, known as an AR family event. While accumulation dominates the surface impacts of the event on Thwaites Eastern Ice Shelf (> 100 kg m−2 or millimeters water equivalent), we find small amounts of surface melt as well (< 5 kg m−2). The results presented here enable us to quantify the past impacts of ARs on West Antarctica's surface mass balance (SMB) and characterize their interannual variability and trends, enabling a better assessment of future AR-driven changes in the SMB.

54 ENVIRONMENTAL SCIENCES↗