Search NASA⌕ Search

SEARCH · Search NASA

Results for “atom migration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

The effect of composition on helium bubble nucleation in complex concentrated alloys

Molecular dynamics simulations of helium implantation have been performed in the MoNbTaTi complex concentrated alloy (CCA) to determine the impact of composition on helium clustering and bubble nucleation. It was found that compositions with lower interstitial atomic volume resulted in smaller cluster sizes, higher helium-to-vacancy ratios, and larger migration barriers. As the atomic volume decreases, it is harder to accommodate additional helium in the lattice and for helium to diffuse between interstitial sites, resulting in smaller cluster sizes. In particular, increasing molybdenum directly correlated with a decreased interstitial atomic volume and increased migration barrier. Niobium exhibited the opposite trend, where more niobium in the material resulted in larger interstitial atomic volumes and cluster sizes but lower migration barriers. The atomic volume was determined to be an indicator of the susceptibility of the material to helium bubble growth and could potentially be used as a metric to screen compositions for resistance to helium damage. In this way, properties such as available interstitial volumes could be used to screen materials more rapidly given the vast compositional space of CCAs.

McCarthy, Megan Jeanne [Sandia National Laboratori↗

Interaction Of Vacancies And Helium Atoms With A/2 <111> Screw Dislocations In Α-Fe

Migration energies of vacancies and He atoms in and near the core of an a/2<111> screw dislocation in a-Fe were determined in atomistic simulations using conjugate gradient relaxation and the Dimer method for determining saddle point energies. Results for defects in initial positions in and near the screw dislocation core were obtained for migration toward and away from the dislocation line, as well as along the dislocation line direction. For both vacancies and individual interstitial helium atoms migration is favored toward and along the screw dislocation. Vacancies trapped in the dislocation core migrate along the dislocation with a migration energy of about 0.4 eV, which is about half the migration energy of vacancies in the perfect crystal.

36 MATERIALS SCIENCE↗

First principles investigation of the initial stage of H-induced missing-row reconstruction of Pd(110) surface

The pathway of H diffusion that will induce the migration of Pd atom is investigated by employing first principles calculations based on density functional theory to explain the origin of missing-row reconstruction of Pd(110).The calculated activation barrier and the H-induced reconstruction energy reveal that the long bridge-to-tetrahedral configuration is the energetically favored process for the initial stage of reconstruction phenomenon. While the H diffusion triggers the migration of Pd atom, it is the latter process that significantly contributes to the activated missing-row reconstruction of Pd(110). Nonetheless, the strong interaction between the diffusing H and the Pd atoms dictates the occurrence of reconstructed surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A thermal spike model of grain growth under irradiation.

The experimental study of grain growth in nanocrystalline metallic foils under ion irradiation showed the existence of a low-temperature regime (below about 0.15-0.22T{sub m}), where grain growth is independent of the irradiation temperature, and a thermally assisted regime where grain growth is enhanced with increasing irradiation temperature. A model is proposed to describe grain growth under irradiation in the temperature-independent regime, based on the direct impact of the thermal spikes on grain boundaries. In the model, grain-boundary migration occurs by atomic jumps, within the thermal spikes, biased by the local grain-boundary curvature driving. The jumps in the spike are calculated based on Vineyard's analysis of thermal spikes and activated processes using a spherical geometry for the spike. The model incorporates cascade structure features such as subcascade formation, and the probability of subcascades occurring at grain boundaries. This results in a power law expression relating the average grain size with the ion dose with an exponent equal to 3, in agreement with the experimental observations. The model is applied to grain growth observed in situ in a transmission electron microscope in a wide range of doses, temperature, and irradiation conditions for four different pure metals, and shown to predict well the results in all applicable cases. Some discussions are also presented on the expansion of the model to the thermally assisted regime. The paper is organized in six sections. Section 1 gives background and literature review, while Secs. 2, 3 review experimental methods and results for in situ grain growth under irradiation. Section 4 derives the model proposed to find the grain-growth equation in the nonthermal regime, and in Sec. 5 the model is applied to the results. In Sec. 6 grain growth in the thermally assisted regime is discussed and Sec. 7 presents the conclusions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Antithermal mobility in Σ7 and Σ9 grain boundaries caused by stick-slip stagnation of ordered atomic motions about Coincidence Site Lattice atoms

Antithermal grain boundary migration is an interesting phenomenon that has been recently discovered. These grain boundaries behave opposite to what is expected of thermally activated grain boundary migration; the antithermal grain boundaries exhibit mobility that decreases with increasing temperature. Two recent studies have provided insight into important behaviors correlated with antithermal migration. O'Brien and Foiles (J Mater. Sci. Vol. 51, p. 6607–6623, 2016) demonstrated that the high mobility exhibited by an antithermal Σ7 grain boundary is enabled by ordered atomic motions. Ulomek and Mohles (Acta Mater. Vol. 103, p. 424–432, 2016) demonstrated that the thermal migration of a different Σ7 grain boundary exhibited a two-step migration process. In this work, we demonstrate that the antithermal temperature dependence exhibited by these types of grain boundaries is caused by a combination of these two discoveries. Specifically, ordered atomic motions about Coincidence Site Lattice atoms (atoms common to the lattices on either side of the grain boundary), seen by O'Brien and Foiles, are interrupted by additional thermal energy at higher temperature. This is the source of the two-step process seen by Ulomek and Mohles. This two-step process is akin to stick-slip behaviors observed in shear coupled grain boundary migration. As temperature is increased, the duration of the stagnant portion increases and the mobility decreases. This behavior is demonstrated through molecular dynamics simulations in nickel bicrystals over temperatures ranging from 100 to 1400 K for Σ7 and Σ9 grain boundaries. For these Σ7 and Σ9 grain boundaries, those that have ordered atomic mechanisms are almost exclusively antithermal, while those that do not have ordered atomic mechanisms are thermally activated.

36 MATERIALS SCIENCE↗

The Effect of the Formation of Silicides on the Resistivity of Silicon

The effect of the formation of thin films of nickel silicides on the migration of intrinsic p-type impurities in silicon was studied for the first time. It was found that bulk resistance ρ{sub v} of a single Si crystal increases by a factor of 3–4 if a NiSi{sub 2} film with thickness θ ≥ 50–100 Å forms on its surface. This is attributable to the migration of boron atoms toward the silicide film. The Si layer thickness enabling measurable boron migration was estimated at 800–1000 Å.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sluggish, chemical bias and percolation phenomena in atomic transport by vacancy and interstitial diffusion in Ni-Fe alloys

In this paper, we report the results of extended atomistic modeling of intrinsic mobility of point defects and associated atomic transport in Ni-Fe model binary alloys. We consider the effects of composition and temperature and present evidence of the sluggish and chemically biased diffusion, and percolation effects occurring in atomic transport via the vacancy and interstitial migration mechanisms. The results are analyzed and discussed in the light of previous studies and some experimental observations. It is demonstrated that the sluggish diffusion, the chemically biased diffusion, and the percolation are interlinked phenomena that are defined by the chemical complexity of particular alloys. Methods for predicting these phenomena in multicomponent alloys are discussed.We report a fundamental understanding of sluggish diffusion, chemically-biased diffusion, as well as percolation phenomena, in Ni-Fe random alloys for vacancy and interstitial atom migration mechanisms.

36 MATERIALS SCIENCE↗

Effect of hydrogen on the {beta} transus temperature of TC21 alloy

Effect of hydrogen on the {beta} transus temperature of TC21 alloy was investigated by metallographic technique and dilatometry. It is found that the {beta} transus temperature is closely related to the hydrogen content. For the hydrogenated TC21 alloy, the starting and finishing temperatures of {alpha} {yields} {beta} phase transition decrease with the increasing of hydrogen content before the hydride precipitates. And the finishing temperature of {alpha} {yields} {beta} phase transition increases as the hydrogen content increases after the hydride precipitates. Furthermore, corresponding inherent mechanisms of the above-mentioned phenomena have been presented according to atomic diffusivity, interface migration and the precipitation of hydride. - Research Highlights: {yields} The {beta} transus temperature of TC21 alloy is closely related to hydrogen content. {yields} The mechanism for effect of hydrogen on the {beta} transus temperature is presented. {yields} Precipitation of hydride has a significant influence on the {beta} transus temperature. {yields} The {alpha}/{beta} interface migration has an important effect on the {beta} transus temperature. {yields} The improvement of atom diffusivity affects the {beta} transus temperature highly.

36 MATERIALS SCIENCE↗

Asymmetry of radiation damage properties in Al-Ti nanolayers

Molecular dynamics (MD) simulations were employed with empirical potentials to study the effects of multilayer interfaces and interface spacing in Al-Ti nanolayers. Several model interfaces derived from stacking of close-packed layers or face-centered cubic \{100\} layers were investigated. The simulations reveal significant and important asymmetries in defect production with $\sim$60\% of vacancies created in Al layers compared to Ti layers within the Al-Ti multilayer system. The asymmetry in the creation of interstitials is even more pronounced. The asymmetries cause an imbalance in the ratio of vacancies and interstitials in films of dissimilar materials leading to $>$90\% of the surviving interstitials located in the Al layers. While in the close-packed nanolayers the interstitials migrate to the atomic layers adjacent to the interface of the Al layers, in the \{100\} nanolayers the interstitials migrate to the center of the Al layers and away from the interfaces. The degree of asymmetry and defect ratio imbalance increases as the layer spacing decreases in the multilayer films. Underlying physical processes are discussed including the interfacial strain fields and the individual elemental layer stopping power in nanolayered systems. In addition, experimental work was performed on low-dose (10$^{16}$ atoms/cm$^2$) helium (He) irradiation on Al/Ti nanolayers (5 nm per film), resulting in He bubble formation $\sim$1 nm in diameter in the Ti film near the interface. The correlation between the preferential flux of displaced atoms from Ti films to Al films during the defect production that is revealed in the simulations and the morphology and location of He bubbles from the experiments is discussed.

Al-Ti interatomic potential↗

Molecular dynamics simulation of Xe bubble nucleation in nanocrystalline UO2 nuclear fuel

We have performed molecular dynamics (MD) simulations to investigate the dynamical interactions between vacancy defects, fission gas atoms (Xe), and moving grain boundaries in a model of polycrystalline UO2 nuclear fuel with average grain diameter of about 20 nm. We followed the mobility and aggregation of Xe atoms in the vacancy-saturated model compound for up to 2 ns. During this time we observed the aggregation of Xe atoms into nuclei, which are possible precursors to Xe bubbles. The nucleation was driven by the migration of Xe atoms via vacancy-assisted diffusion. The Xe clusters aggregate faster than grain boundary diffusion rates and are smaller than experimentally observed bubbles. As the system evolves to equilibrium, the vacancies reach a near steady-state distribution, the Xe atom cluster growth slows down significantly, and the lattice relaxes around the cluster. These simulations provide insights into fundamental physical processes that are inaccessible to experiment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Improvement of the quality of graphene-capped InAs/GaAs quantum dots

In this paper, we study the transfer of graphene onto InAs/GaAs quantum dots (QDs). The graphene is first grown on Cu foils by chemical vapor deposition and then polymer Polymethyl Methacrylate (PMMA) is deposited on the top of graphene/Cu. High quality graphene sheet has been obtained by lowering the dissolving rate of PMMA using vapor processing. Uncapped as well as capped graphene InAs/GaAs QDs have been studied using optical microscopy, scanning electron microscopy, and Raman spectroscopy. We gather from this that the average shifts Δω of QDs Raman peaks are reduced compared to those previously observed in graphene and GaAs capped QDs. The encapsulation by graphene makes the indium atomic concentration intact in the QDs by the reduction of the strain effect of graphene on QDs and the migration of In atoms towards the surface. This gives us a new hetero-structure graphene–InAs/GaAs QDs wherein the graphene plays a key role as a cap layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial oxygen migration and its effect on the magnetic anisotropy in Pt/Co/MgO/Pt films

This paper reports the interfacial oxygen migration effect and its induced magnetic anisotropy evolution in Pt/Co/MgO/Pt films. During depositing the MgO layer, oxygen atoms from the MgO combine with the neighboring Co atoms, leading to the formation of CoO at the Co/MgO interface. Meanwhile, the films show in-plane magnetic anisotropy (IMA). After annealing, most of the oxygen atoms in CoO migrate back to the MgO layer, resulting in obvious improvement of Co/MgO interface and the enhancement of effective Co-O orbital hybridization. These favor the evolution of magnetic anisotropy from IMA to perpendicular magnetic anisotropy (PMA). The oxygen migration effect is achieved by the redox reaction at the Co/MgO interface. On the contrary, the transfer from IMA to PMA cannot be observed in Pt/Co/Pt films due to the lack of interfacial oxygen migration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Suppressed bimodal size distribution of InAs quantum dots grown with an As{sub 2} source using molecular beam epitaxy

We demonstrate the suppressed bimodal size distribution of InAs quantum dots (QDs) grown with an As{sub 2} source using molecular beam epitaxy. QDs grown with an As{sub 2} source have single mode photoluminescence (PL) spectra, whereas QDs grown with an As{sub 4} source have bimodal spectra. The PL intensities of QDs grown with an As{sub 2} source are higher than those grown with an As{sub 4} source. The density of QDs grown with an As{sub 2} source decreases at high As pressure, whereas the density of As{sub 4} grown QDs increases with As pressure. These results indicate that the surface migration of In atoms is enhanced at a higher As{sub 2} pressure, resulting in improved optical properties. The enhanced surface migration is thought to be due to the stable As-As dimer structures under an As{sub 2} source.

36 MATERIALS SCIENCE↗

Morphological evolution of InAs/InP quantum wires through aberration-corrected scanning transmission electron microscopy

Evolution of the size, shape and composition of self-assembled InAs/InP quantum wires through the Stranski Krastanov transition has been determined by aberration-corrected Z -contrast imaging. High resolution compositional maps of the wires in the initial, intermediate and final formation stages are presented. (001) is the main facet at their very initial stage of formation, which is gradually reduced in favour of {114} or {118}, ending with the formation of mature quantum wires with {114} facets. Significant changes in wire dimensions are measured when varying slightly the amount of InAs deposited. These results are used as input parameters to build three-dimensional models that allow calculation of the strain energy during the quantum wire formation process. The observed morphological evolution is explained in terms of the calculated elastic energy changes at the growth front. Regions of the wetting layer close to the nanostructure perimeters have higher strain energy, causing migration of As atoms towards the quantum wire terraces, where the structure is partially relaxed; the thickness of the wetting layer is reduced in these zones and the island height increases until the (001) facet is removed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silicon nanocrystals in SiN{sub x}/SiO{sub 2} hetero-superlattices: The loss of size control after thermal annealing

Superlattices containing 3 nm thick silicon rich silicon nitride sublayers and 3 nm and 10 nm thick SiO{sub 2} barriers were prepared by plasma enhanced chemical vapor deposition. Despite the as-prepared samples represented a well-kept multilayer structure with smooth interfaces, the high temperature annealing resulted in the total destruction of multilayer structure in the samples containing 3 nm SiO{sub 2} barriers. Energy-filtered transmission electron microscopy images of these samples indicated a silicon nanoclusters formation with sizes of 2.5–12.5 nm, which were randomly distributed within the structure. Although in the sample with 10 nm SiO{sub 2} barriers some fragments of the multilayer structure could be still observed after thermal annealing, nevertheless, the formation of large nanocrystals with diameters up to 10 nm was confirmed by dark field transmission electron microscopy. Thus, in contrast to the previously published results, the expected size control of silicon nanocrystals was lost. According to the FTIR results, the thermal annealing of SiN{sub x}/SiO{sub 2} superlattices led to the formation of silicon nanocrystals in mostly oxynitride matrix. Annealed samples demonstrated a photoluminescence peak at 885 nm related to the luminescence of silicon nanocrystals, as confirmed by time-resolved photoluminescence measurements. The loss of nanocrystals size control is discussed in terms of the migration of oxygen atoms from the SiO{sub 2} barriers into the silicon rich silicon nitride sublayers. A thermodynamic mechanism responsible for this process is proposed. According to this mechanism, the driving force for the oxygen migration is the gain in the configuration entropy related to the relative arrangements of oxygen and nitrogen atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of crystallography and the mechanisms associated with migration of incoherent twin grain boundaries

With twin grain boundaries playing an important role in numerous materials, it is important to understand their behavior across the full range of possible boundary plane orientations. This work examines the migration of 41 computed Σ3 nickel grain boundaries over a range of temperatures. The boundary plane orientation appears to play the determining role in the nature of the migration observed, which is evident when the data are plotted in the fundamental zone of possible boundary plane orientations. GBs whose boundary plane lie between (1 1 1) and (2 1 1) exhibit thermally activated migration and the atoms do not move in a coordinated fashion. The remaining GBs, including the (1 0 1) GB, exhibit some form of thermally damped migration. The thermally damped migration is characterized by inverse temperature dependence where the GBs migrate faster at lower temperatures and move in a coordinated fashion involving Shockley partial dislocations. The inverse temperature dependence, which is confirmed by random walk simulations, appears to be consistent with dislocation drag, which could be related to the Shockley partial dislocations. At least one GB exhibits mixed mobility trends due to the presence of both thermally activated and thermally damped migration characteristics.

36 MATERIALS SCIENCE↗

Thermodynamic and kinetic properties of layered-CaCo2O4 for the Ca-ion batteries: a systematic first-principles study

One of the more promising directions in multivalent energy storage is systems based on Ca ion intercalation due to the potential for high voltage and capacity. A major challenge for enabling such a battery is to find cathode materials capable of fast ionic diffusion and reversible insertion of Ca ions. Here, on the basis of first-principles calculations, we have demonstrated that layered CaCo 2 O 4 exhibits favorable thermodynamic and kinetic properties that should enable topotactic Ca ion intercalation reactions. The P3-type layered Ca x Co 2 O 4 (0 < x < 1) with either of space groups of P 1 or P 2 1 / m are stable at multiple Ca concentrations and show a smooth voltage plateau higher than 3 V up to X = 0.5. The energy barriers of the single Ca ion migration are as low as 0.36 eV and 0.27 eV at the dilute and high vacancy concentration limits, respectively. Therefore, although varying the vacancy environments of the diffusing atom influences the migration barriers, they do not exceed 0.6 eV. Stochastic analysis of Ca hopping events performed by ab initio molecular dynamics (AIMD) simulation has shown that the migration barriers are lower than 0.32 eV. Therefore, the Ca diffusivity at room temperature extrapolated from the AIMD results is comparable to Li diffusivity (>10 -10 cm 2 s -1 ) in conventional Li cathode materials, suggesting the feasibility of layered Ca x Co 2 O 4 as multivalent cathode materials. Finally, the structural factors that enable fast diffusion are discussed.

25 ENERGY STORAGE↗