Search NASA⌕ Search

SEARCH · Search NASA

Results for “augmentor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Noise generated by STOL core-jet thrust reversers.

This paper summarizes the results of an experimental investigation on the noise generated by target-type thrust reversers. The experimental data are normalized and scaled up to sizes suitable for reversing the core jets of a 45,400-kg augmentor-wing-type STOL airplane. The scaling calculatings yield perceived noise levels well above the 95-PNdB design goal for both sideline and flyover at 152.5 m. V-gutter and semicylindrical reversers were tested with a 5.24-cm-diameter circular nozzle, and a semicylindrical reverser was also tested with a 7.78-cm-diameter circular nozzle. Other test variables were the spacing between nozzle and reverser, reverser orientation, and nozzle pressure ratio. The thrust reversers, in addition to being noisier than the nozzle alone, also had a more uniform directivity.

Stone, J. R.↗
NASA NTRS1972

Use of the flight simulator in the design of a STOL research aircraft.

Piloted simulator tests on the NASA-Ames Flight Simulator for Advanced Aircraft motion base played a major role in guiding the design of the Modified C-8A 'Buffalo' augmentor wing jet flap STOL research airplane. Design results are presented for the flight control systems, lateral-directional SAS, hydraulic systems, and engine and thrust vector controls. Emphasis is given to lateral control characteristics on STOL landing approach, engine-out control and recovery techniques in the powered-lift regime, and operational flight procedures which affected airplane design.

Spitzer, R. E.↗
NASA NTRS1972

Design and flight experience with a digital fly-by-wire control system using Apollo guidance system hardware on an F-8 aircraft.

This paper discusses the design and initial flight tests of the first digital fly-by-wire system to be flown in an aircraft. The system, which used components from the Apollo guidance system, was installed in an F-8 aircraft. A lunar module guidance computer is the central element in the three-axis, single-channel, multimode, digital, primary control system. An electrohydraulic triplex system providing unaugmented control of the F-8 aircraft is the only backup to the digital system. Emphasis is placed on the digital system in its role as a control augmentor, a logic processor, and a failure detector. A sampled-data design synthesis example is included to demonstrate the role of various analytical and simulation methods. The use of a digital system to implement conventional control laws was shown to be practical for flight. Logic functions coded as an integral part of the control laws were found to be advantageous. Verification of software required an extensive effort, but confidence in the software was achieved. Initial flight results showed highly successful system operation, although quantization of pilot's stick and trim were areas of minor concern from the piloting standpoint.

Deets, D. A.↗
NASA NTRS1972

Longitudinal aerodynamic characteristics of a large scale model with a swept wing and augmented jet flap in ground effect

The investigation of the in-ground-effect, longitudinal aerodynamic characteristics of a large scale swept augmentor wing model is presented, using 40 x 80 ft wind tunnel. The investigation was conducted at three ground heights; h/c equals 2.01, 1.61, and 1.34. The induced effect of underwing nacelles, was studied with two powered nacelle configurations. One configuration used four JT-15D turbofans while the other used two J-85 turbojet engines. Two conical nozzles on each J-85 were used to deflect the thrust at angles from 0 to 120 deg. Tests were also performed without nacelles to allow comparison with previous data from ground effect.

Falarski, M. D.↗
NASA NTRS1972

Study of short haul high-density V/STOL transportation systems, volume 1

The relative advantages of STOL aircraft concepts were examined by simulating the operations of a short haul high-density intercity STOL system set in two arenas, the California corridor and the Chicago-Detroit-Cleveland triangle, during the 1980 time period. The study was constrained to the use of three aircraft concepts designated as the deflected slipstream turboprop, externally blown flap, and augmentor wing turbofan configurations. The projected demographic, economic, travel demand, and travel characteristics of the representative arenas were identified. The STOL airline operating scenarios were then formulated and through the use of the aerospace modal split simulation program, the traveler modal choices involving alternative STOL concepts were estimated in the context of the total transportation environment for 1980. System combinations that presented the best potential for economic return and traveler acceptance were then identified for each STOL concept.

Solomon, H. L.↗
NASA NTRS1972

STOL noise sources and fan noise treatment

STOL noise goals, noise sources, and their affects on engine and propulsion systems design are considered. It is shown that major noise sources constitute the blown-flap system with its turbofan engine and the augmentor wing propulsion system. Most of the problem areas associated with STOL propulsion systems are defined and the development of a multistage fan engine with proper rotor-stator spacings and low noise core exhaust jet is illustrated. A variable-area acoustic inlet provides near sonic flow conditions during takeoff and landing.

Rulis, R. J.↗
NASA NTRS1973

Status of current development activity related to STOL propulsion noise reduction

The noise goal of 95 PNdb for STOL aircraft imposes severe technology demands on propulsion systems. Effects of this goal on the design of the propulsion system are reviewed. Results from recent development programs associated with STOL noise reduction, such as high bypass fan tests, 25 PNdb acoustic suppression tests, sonic inlets, and powered lift system noise tests, are presented. Integrated propulsion system designs for the blown flap and augmentor wing powered lift systems capable of meeting the noise goal are shown and the performance, installation, and economic penalties assessed.

Rulis, R. J.↗
NASA NTRS1973

Small-scale noise tests of a slot nozzle with V-gutter target thrust reverser

The noise generated by a 2.26- by 11.43-cm slot nozzle with a V-gutter reverser, as well as some aerodynamic data on flow, thrust-reversal efficiency, and nozzle jet velocity decay were studied. The experimental data are scaled up to sizes suitable for reversing the wing flow of a 45/400-kg augmentor-wing-type STOL airplane, yielding perceived noise levels well above the 95-PNdb design goal on the 152-m sideline. The reverser, in addition to being noisier than the nozzle alone, also had a more uniform directional distribution and more high frequency noise. The maximum overall sound pressure level and the effective sound power level both varied with the sixth power of nozzle jet velocity. Preliminary experiments indicated possible sideline noise reduction by shielding.

Stone, J. R.↗
NASA NTRS1973

A manual control theory analysis of vertical situation displays for STOL aircraft

Pilot-vehicle-display systems theory is applied to the analysis of proposed vertical situation displays for manual control in approach-to-landing of a STOL aircraft. The effects of display variables on pilot workload and on total closed-loop system performance was calculated using an optimal-control model for the human operator. The steep approach of an augmentor wing jet STOL aircraft was analyzed. Both random turbulence and mean-wind shears were considered. Linearized perturbation equations were used to describe longitudinal and lateral dynamics of the aircraft. The basic display configuration was one that abstracted the essential status information (including glide-slope and localizer errors) of an EADI display. Proposed flight director displays for both longitudinal and lateral control were also investigated.

Baron, S.↗
NASA NTRS1973

Approach path control for powered-lift STOL aircraft

A flight control system concept is defined for approach flightpath control of an augmentor wing (or similar) powered-lift STOL configuration. The proposed STOL control concept produces aircraft transient and steady-state control responses that are familiar to pilots of conventional jet transports, and has potential for good handling qualities ratings in all approach and landing phases. The effects of trailing-edge rate limits, real-engine dynamics, and atmospheric turbulence are considered in the study. A general discussion of STOL handling qualities problems and piloting techniques is included.

Clymer, D. J.↗
NASA NTRS1973

The Buffalo/Spey jet-STOL research aircraft

The program to design and build a Buffalo/Spey Augmentor-Wing research aircraft is presented. The development of an internally blown flap system for the generation of powered lift is discussed. Modification, development, and testing of the Rolls-Royce Spey engine are reported. The ground tests and first flights of the aircraft are described and the application of the internally blown flap concept for short takeoff military transport aircraft is proposed.

Whittley, D. C.↗
NASA NTRS1973

Effect of shear on aircraft landing

A simulation study was conducted to determine the effect of wind shear on aircraft landings. The landing of various type of commercial and military aircraft was digitally simulated starting from an initial altitude of 300 feet. Assuming no pilot feedback during descent, the deviation in touchdown point due to vertical profiles of wind shear was determined. The vertical profiles of wind shear are defined in terms of surface roughness, Z sub 0, and stability, L, parameters. The effects on touchdown due to Z sub 0 and L have been calculated for the different type aircraft. Comparisons were made between the following types of aircraft: (1) C-130E, (2) C-135A, (3) C-141, (4) DC-8, (5) Boeing 747, and (6) an augmentor-wing STOL. In addition, the wind shear effect on touchdown resulting from different locations of the center of gravity and gross weights was also analyzed.

Luers, J. K.↗
NASA NTRS1973

Status of current development activity related to STOL propulsion noise reduction.

The noise goal of 95 PNdB for STOL aircraft imposes severe technology demands on propulsion systems. Effects of this goal on the design of the propulsion system are reviewed. Results from recent development programs associated with STOL noise reduction, such as high bypass fan tests, 25 PNdB acoustic suppression tests, sonic inlets, and powered lift system noise tests, are presented. Integrated propulsion system designs for the blown flap and augmentor wing powered lift systems capable of meeting the noise goal are shown, and the performance, installation, and economic penalties are assessed.

Rulis, R. J.↗
NASA NTRS1973

Noise tests of a high-aspect-ratio slot nozzle with various V-gutter target thrust reversers

The results of experiments on the noise generated by a 1.33- by 91.4 cm slot nozzle with various V-gutter reversers, and some thrust measurements are presented. The experiments were conducted with near-ambient temperature jets at nozzle pressure ratios of 1.25 to 3.0, yielding jet velocities of about 190 to 400 m/sec. At pressure ratios of 2 or less, the reversers, in addition to being noisier than the nozzle alone, also had a more uniform directional distribution and more high-frequency noise. At pressure ratios above 2, the nozzle alone generated enough shock noise that the levels were about the same as for the reversers. The maximum overall sound pressure level and the effective overall sound power level both varied with the sixth power of jet velocity over the range tested. The data were scaled up to a size suitable for reversing the wing-flap slot nozzle flow of a 45 400-kg augmentor-wing-type airplane on the ground, yielding perceived noise levels well above 95 PNdB on a 152-m sideline.

Stone, J. R.↗
NASA NTRS1974

Design of a powered elevator control system

The design, fabrication and flight testing of a powered elevator system for the Augmentor Wing Jet STOL Research Aircraft (AWJSRA or Mod C-8A) are discussed. The system replaces a manual spring tab elevator control system that was unsatisfactory in the STOL flight regime. Pitch control in the AWJSRA is by means of a single elevator control surface. The elevator is used for both maneuver and trim control as the stabilizer is fixed. A fully powered, irreversible flight control system powered by dual hydraulic sources was designed. The existing control columns and single mechanical cable system of the AWJSRA have been retained as has been the basic elevator surface, except that the elevator spring tab is modified into a geared balance tab. The control surface is directly actuated by a dual tandem moving body actuator. Control signals are transmitted from the elevator aft quadrant to the actuator by a linkage system that includes a limited authority series servo actuator.

Glende, W. L. B.↗
NASA NTRS1973

Design of a flight director/configuration management system for piloted STOL approaches

The design and characteristics of a flight director for V/STOL aircraft are discussed. A configuration management system for piloted STOL approaches is described. The individual components of the overall system designed to reduce pilot workload to an acceptable level during curved, decelerating, and descending STOL approaches are defined. The application of the system to augmentor wing aircraft is analyzed. System performance checks and piloted evaluations were conducted on a flight simulator and the results are summarized.

Hoh, R. H.↗
NASA NTRS1974

Forecast of jet engine exhaust emissions for future high altitude commercial aircraft

Projected minimum levels of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high altitude cruise conditions are presented. The forecasts are based on: (1) current knowledge of emission characteristics of combustors and augmentors; (2) the current status of combustion research in emission reduction technology; (3) predictable trends in combustion systems and operating conditions as required for projected engine designs that are candidates for advanced subsonic or supersonic commercial aircraft. Results are presented for cruise conditions in terms of an emission index, g pollutant/kg fuel. Two sets of engine exhaust emission predictions are presented: the first, based on an independent NASA study and the second, based on the consensus of an ad hoc committee composed of industry, university, and government representatives. The consensus forecasts are in general agreement with the NASA forecasts.

Grobman, J.↗
NASA NTRS1974

Jet engine exhaust emissions of high altitude commercial aircraft projected to 1990

Projected minimum levels of engine exhaust emissions that may be practicably achievable for future commercial aircraft operating at high-altitude cruise conditions are presented. The forecasts are based on:(1) current knowledge of emission characteristics of combustors and augmentors; (2) the status of combustion research in emission reduction technology; and (3) predictable trends in combustion systems and operating conditions as required for projected engine designs that are candidates for advanced subsonic or supersonic commercial aircraft fueled by either JP fuel, liquefied natural gas, or hydrogen. Results are presented for cruise conditions in terms of both an emission index (g constituent/kg fuel) and an emission rate (g constituent/hr).

Grobman, J.↗