Search NASA⌕ Search

SEARCH · Search NASA

Results for “ballooning mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Nonlinear twist-kink instability of a coronal loop

Three-dimensional magnetoinductive particle simulations are used to demonstrate that the mechanical twisting motion applied to a magnetized plasma column induces a current aligned to the external magnetic field direction, pinches the plasma and magnetic fields, and stores the energy in poloidal magnetic fields. As the twist motion continues, the field lines locally begin to wrap around the plasma more than one revolution. A strong MHD instability sets in that is a mixture of kink and ballooning modes, releasing the magnetic energy and causing destruction of coherent column structure and flows of turbulent plasma. A similar episode ensues, exhibiting relaxation oscillations. The buildup of poloidal fields and structure and its sudden release driven by the twist motion may be a model for the solar coronal loop dynamics which exhibits a slow energy buildup with some photospheric motion and a sudden energy release by flares.

Zaidman, E. G.↗
NASA NTRS1990

Ballooning stability of anisotropic, rotating plasmas

The linearized equation of motion is given in a Lagrangian representation for a rotating plasma with anisotropic pressure. A WKB theory is developed for large-n ballooning modes in an axisymmetric configuration with field-aligned and rigid toroidal flows. In the presence of field-aligned flows, it is shown that a resonance occurs which is strongly suggestive of a generalized mirror instability. In the presence of toroidal rotation, a possible stabilizing effect is identified for P(normal) greater than P(parallel). Finally, as a special case of the theory, the necessary and sufficient conditions for stability in a static, anisotropic plasma are obtained.

Wang, X.-H.↗
DOE OSTI2023

Close coupling of the peeling ballooning and external kink modes in high poloidal-beta discharges with strong shape and large pedestal width

In plasmas with strong shape and large pedestal width, like DIII-D high poloidal-beta discharges, the eigenvalue spectrum of the peeling ballooning mode (PBM) is shown to shift to the very low-n regime near one, where n is the toroidal mode number. This peeling-type eigenvalue spectrum has a further shift to n = 1, thus being smoothly connected to the n = 1 external kink mode (EKM), as the normalized beta (β N ) increases. Once this connection occurs, the mode takes a mixture form of the PBM and EKM with its mode structure varying from the PBM-like to the EKM-like one as β N increases. The mode stability also becomes sensitive to both the local pedestal gradient and global β N , thus allowing an anti-correlation between the two driving forces. Further, these results appear to provide a qualitative explanation of the two unexpected features observed in the DIII-D high poloidal-beta discharges, that is, the dominance of the n = 1 mode in the edge-localized-modes and the negative correlation between the pedestal height and the internal transport barrier strength.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Plasmoid-mediated reconnection during nonlinear peeling–ballooning edge-localized modes

Abstract Plasmoid-mediated reconnection is investigated for nonlinear peeling–ballooning edge-localized modes (P-B ELMs). The formation of current sheets and the transition to 3D current sheet instability is demonstrated through fully nonlinear resistive MHD simulations of P-B ELMs in DIII-D discharges. Large-scale axisymmetric current sheets, as well as small-scale poloidally extended current sheets, are formed as the coherent P-B ELM filaments nonlinearly evolve. It is observed that, at high Lundquist numbers, these current sheets break during a reconnection burst, i.e. a secondary exponential growth of intermediate modes followed by relaxation due to the suppression of P-B drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

The impact of kinetic and global effects on ideal ballooning 2nd stable pedestals of conventional and low aspect-ratio tokamaks

The EPED model (Snyder et al 2011 Nucl. Fusion 51 103016) has had success in describing the pedestal structure of Type-I ELM and QH-mode plasmas in tokamaks, by combining kinetic ballooning mode (KBM) and peeling–ballooning (PB) constraints. Within EPED, the KBM constraint is often approximated by a technique using calculated ideal ballooning mode (IBM) thresholds, fit to a functional form designed to capture non-local effects. It has been noted that quantitative differences between local ideal MHD and gyro-kinetic (GK) ballooning stability can be larger at low aspect ratio. KBM critical pedestals are consistent with observations in initial studies on conventional and spherical tokamaks. In this work, the application of a reduced model for the calculation of the kinetic ballooning stability boundary is presented based on a novel and newly developed gyro-fluid system (GFS) code (Staebler et al 2023 Phys. Plasmas 30 102501). GFS is observed to capture KBMs in DIII-D as well as the NSTX pedestals, opening a route to integrating this model into EPED. Finally, high but finite $n$ global ballooning modes are observed to limit the access to the local 2nd stability and thus provide a transport mechanism that constrains the pedestal evolution with $β_{p,\textrm{ped}}$. The high $n$ global ballooning stability is approximated by its ideal MHD analog using ELITE. It is shown that nearly-local high $n$ modes with $k_yρ_s$ ~ $0.25 - 0.5$ can provide a proxy for the critical $β_{p,\textrm{ped}}$ when a 2nd stable access exists on DIII-D plasmas. The use of GFS and ELITE scaling in EPED provides improved agreement to EPED1 in an initial comparison with DIII-D pedestal data.

Anastopoulos Tzanis, Michail Savvas [Oak Ridge Nat↗
DOE OSTI2023

Ballooning theory for micro-tearing mode in tokamak

This paper aims to investigate the impact of magnetic drift on the linear micro-tearing mode by using a kinetic approach to derive a reduced two-field eigen system in real space. Here, since the magnetic drift in real space has derivatives, it is more efficient to solve the mode equations in a Fourier-ballooning representation using the two-dimensional (2D) ballooning transform. The lowest-order eigen system in the Fourier-ballooning representation consists of two integral equations, which are numerically solved using the finite difference method for both eigenvalues and wave functions. The main results will be presented through graphical eigenvalue scans for each parameter. Furthermore, we present a graphical comparison between the predictions of the ballooning theory and GENE gyrokinetic code simulation in the pedestal region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Importance of resistivity on edge-localized mode onset in spherical tokamaks

In this work, we explore the impact of realistic plasma resistivity on the linear stability of peeling-ballooning (PB) modes in tokamak discharges with low-aspect ratio. For this study we consider discharges that are subject to edge-localized modes (ELMs) in the National Spherical Torus Experiment (NSTX). Employing the state of the art extended-magnetohydrodynamic (MHD) code M3D-C1 it is demonstrated that non-ideal effects can significantly affect PB stability thresholds in NSTX discharges. In particular, robust resistive PB modes are found to exist well before the ideal PB stability threshold is met. These novel results can explain why ideal-MHD theory often does not accurately describe ELM onset in spherical torus configurations, and also present a valuable basis for the development of a predictive model for ELMs in low-aspect ratio tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

ELM-free H-mode phase and decoupling of peeling–ballooning stability boundary in the MAST Upgrade tokamak

A linear magnetohydrodynamic (MHD) peeling–ballooning stability analysis of the edge-localized mode (ELM)-free phase of a MAST Upgrade (MAST-U) H-mode plasma is presented. In contrast to other similar discharges, #47018 is found to have a significantly higher and wider pedestal during its ELM-free H-mode phase that lasts for approximately 80 ms; this is made possible by the reduced core MHD mode activity on the q = 2 surface. During this period, there is sustained decoupling of peeling and ballooning branches of the stability boundary on J–α space, opening an access channel to the second stability regime with higher peaks in pedestal current density $J_{\mathrm{N,ped}}$ and pressure gradient (α). Such decoupling of the stability boundary has not previously been observed in MAST-U H-modes, and if such a condition can be readily reproduced, it opens a wide range of opportunities for MAST-U to explore low-collisionality peeling-limited pedestal regimes as well as advanced scenarios such as quiescent H-modes that are relevant to future reactors such as STEP and ITER.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Numerical modeling of pedestal stability and broadband turbulence of wide-pedestal QH-mode plasmas on DIII-D

The wide-pedestal quiescent high confinement mode discovered on DIII-D in recent years is a stationary and quiescent H-mode (QH-mode) with the pedestal width exceeding EPED prediction by at least 25%. Its characteristics, such as low rotation, high energy confinement and edge localized mode-free operation, make it an attractive operation mode for future reactors. Linear and nonlinear simulations using BOUT++ reduced two fluid MHD models and awere carried out to investigate the bursty broadband turbulence often observed in the edge of wide-pedestal QH-mode plasmas. Two kinds of MHD-scale instabilities in different spatial locations within the pedestal were found in the simulations: one mild peeling–ballooning (PB) mode γ PB < 0.04ω A ) located near the minimum in E r</:sub> well propagating in ion diamagnetic drift direction; and one drift-Alfvén wave locates at smaller radius compared to E r</:sub> well propagating in the electron diamagnetic drift direction and unstable only when the parallel electron dynamics is included in the simulation. The coupling between drift wave and shear Alfvén wave provides a possible cause of the experimentally observed local profile flattening in the upper-pedestal. The rotation direction, mode location, as well as the wavenumber of these two modes from BOUT++ simulations agree reasonably well with the experimental measurements, while the lack of quantitative agreement is likely due to the lack of trapped electron physics in current fluid model. This work presents improved physics understanding of the pedestal stability and turbulence dynamics for wide-pedestal QH-mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Achieving a robust grassy-ELM operation regime in CFETR

We have identified a robust grassy-edge localized mode (ELM) operation regime for future tokamak reactors. The regime exists within a pedestal top electron collisionality (ν*) window at high global poloidal beta (β p ). The existence of an upper ν* limit for grassy-ELMs is consistent with results previously reported in experiments (Oyama et al 2010 Nucl. Fusion 50 064014), while the existence of a lower ν* limit has not been reported previously. Using EPED and BOUT++, a theoretical model that quantitatively explains the physics of the grassy-ELMs within the window, which distinguishes them from the small mixed-ELMs at lower ν*, is presented for the first time. A peeling-ballooning stability boundary is obtained by scanning the operating density space. The change in density corresponds to a change in ν* that affects the pedestal bootstrap current. High β p leads to a strong Shafranov shift, which affects the flux surface averaged pressure drive. The two effects combine to create a peeling-dominated window in intermediate ν* buffered by ballooning-dominated regimes. Only the peeling-dominated regime shows a cyclic behavior in the perturbed pressure during the nonlinear simulation of an ELM crash, reminiscent of grassy-ELM dynamics. Similarly, the energy released across the separatrix is demonstrated to be significantly smaller. The quick recovery of the ELM crash is explainable by the rapid rise of a low n kink-peeling instability when the pedestal current I ped exceeds a threshold at high β p . It minimizes the excursion beyond marginal stability and is absent in the ballooning-dominated regime. Comparison with recent experiments over a range of β p and ν* strongly supports the physical picture proposed by the modeling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Report Summarizing Boiling Transition (Dryout) Testing of FeCrAl Cladding

Nuclear fuel and cladding in a light water reactor must maintain integrity under all normal operational and anticipated operational occurrences. In a Boiling Water Reactor (BWR) some Anticipated Operational Occurrences (AOOs) and Anticipated Transients Without SCRAM (ATWS) events have been known to result in cladding damage due to dryout with conventional Zircaloy-2 claddings. This work presents an assessment of commercially-fabricated, accident tolerant iron-chromium-aluminum (FeCrAl) alloy C26M cladding in such events with regard to the ballooning failure mode for unirradiated cladding In the severe accident test station (SATS), an experiment has been developed to gauge accident tolerance of fuel cladding materials under simulated cyclic dryout conditions. Thermal cycling from 300°C to 650°C was implemented on C26M and Zircaloy-2 tubes. The C26M tube did not fail after 54 cycles. The Zircaloy- 2 tube run under the same parameters as the C26M tube failed during the fourth cycle, consistent with expectations from the literature. Due to thermal gradients present in the furnace, both tubes experienced a maximum temperature at ~780°C. Due to differences in tube geometry, the hoop stress of the C26M tube was significantly higher than that of the Zircaloy-2 tube, 76 MPa at the maximum peak temperature compared to 55 MPa at burst, respectively. The cyclic dryout experiments show an increased performance of C26M over Zircaloy-2 under simulated conditions, an indication of C26M possessing superior high temperature oxidation resistance, mechanical properties and potentially resistance to fatigue.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1990

Thermal emission spectroscopy of the middle atmosphere

The general objective of this research is to obtain, via remote sensing, simultaneous measurements of the vertical distributions of stratospheric temperature, ozone, and trace constituents that participate in the catalytic destruction of ozone (NO(sub y): NO, NO2, NO3, HNO3, ClONO2, N2O5, HNO4; Cl(sub x): HOCl), and the source gases for the catalytic cycles (H2O, CH4, N2O, CF2Cl2, CFCl3, CCl4, CH3Cl, CHF2Cl, etc.). Data are collected during a complete diurnal cycle in order to test our present understanding of ozone chemistry and its associate catalytic cycles. The instrumentation employed is an emission-mode, balloon-borne, liquid-nitrogen-cooled Michelson interferometer-spectrometer (SIRIS), covering the mid-infrared range with a spectral resolution of 0.020 cm(exp -1). Cryogenic cooling combined with the use of extrinsic silicon photoconductor detectors allows the detection of weak emission features of stratospheric gaseous species. Vertical distributions of these species are inferred from scans of the thermal emission of the limb in a sequence of elevation angles. The fourth SIRIS balloon flight was carried out from Palestine, Texas on September 15-16, 1986 with 9 hours of nighttime data (40 km). High quality data with spectral resolution 0.022 cm(exp -1), were obtained for numerous limb sequences. Fifteen stratospheric species have been identified to date from this flight: five species from the NO(sub y) family (HNO3, NO2, NO, ClONO2, N2O5), plus CO2, O3, H2O, N2O, CH4, CCl3F, CCl2F2, CHF2Cl, CF4, and CCl4. The nighttime values of N2O5, ClONO2, and total odd nitrogen have been measured for the first time, and compared to model results. Analysis of the diurnal variation of N2O5 within the 1984 and 1986 data sets, and of the 1984 ClONO2 measurements, were presented in the literature. The demonstrated ability of SIRIS to measure all the major NO(sub y) species, and therefore to determine the partitioning of the nitrogen family over a continuous diurnal cycle, is a powerful tool in the verification and improvement of photochemical modeling.

Kunde, V. G.↗
NASA NTRS1992

Is the earth's magnetotail balloon unstable?

In the past, the onset of magnetospheric substorms has been attributed to the plasma tearing mode instabilities. This paper investigates the ideal MHD ballooning instability of the near-and middle-tail magnetosphere region, as a first step toward determining whether it could trigger the tearing mode, by using the energy principle to investigate whether standard 2D tail models with the 'hard' ionospheric boundary condition are unstable to ballooning instability. Numerical results are presented for compressible ballooning modes that are symmetric about the center of the current sheet. It is shown that, for such a hard boundary condition, no reasonable magnetotail configuration exists that would be unstable to compressible symmetric ballooning but stable against interchange.

Lee, D.-Y.↗
NASA NTRS1989

Fracture characteristics of balloon films

An attempt was made to determine the failure modes of high altitude scientific balloons through an investigation of the fracture characteristics of the thin polyethylene films. Two films were the subject of the evaluation, Winzen Int.'s Stratafilm SF-85 and Raven Industries' Astro-E. Research began with an investigation of the film's cold brittleness point and it's effect on the ultimate strength and elasticity of the polyethylene film. A series of preliminary investigations were conducted to develop an understanding of the material characteristics. The primary focus of this investigation was on the notch sensitivity of the films. Simple stress strain tests were also conducted to enable analysis employing fracture toughness parameters. Studies were conducted on both film types at 23 C (room temperature), -60 C, -90 C, and -120 C.

Portanova, Marc A.↗
DOE OSTI2024

Overview of ASDEX upgrade results in view of ITER and DEMO

Experiments on ASDEX Upgrade (AUG) in 2021 and 2022 have addressed a number of critical issues for ITER and EU DEMO. A major objective of the AUG programme is to shed light on the underlying physics of confinement, stability, and plasma exhaust in order to allow reliable extrapolation of results obtained on present day machines to these reactor-grade devices. Concerning pedestal physics, the mitigation of edge localised modes (ELMs) using resonant magnetic perturbations (RMPs) was found to be consistent with a reduction of the linear peeling-ballooning stability threshold due to the helical deformation of the plasma. Conversely, ELM suppression by RMPs is ascribed to an increased pedestal transport that keeps the plasma away from this boundary. Candidates for this increased transport are locally enhanced turbulence and a locked magnetic island in the pedestal. The enhanced D-alpha (EDA) and quasi-continuous exhaust (QCE) regimes have been established as promising ELM-free scenarios. Here, the pressure gradient at the foot of the H-mode pedestal is reduced by a quasi-coherent mode, consistent with violation of the high-n ballooning mode stability limit there. This is suggestive that the EDA and QCE regimes have a common underlying physics origin. In the area of transport physics, full radius models for both L- and H-modes have been developed. These models predict energy confinement in AUG better than the commonly used global scaling laws, representing a large step towards the goal of predictive capability. A new momentum transport analysis framework has been developed that provides access to the intrinsic torque in the plasma core. In the field of exhaust, the X-Point Radiator (XPR), a cold and dense plasma region on closed flux surfaces close to the X-point, was described by an analytical model that provides an understanding of its formation as well as its stability, i.e., the conditions under which it transitions into a deleterious MARFE with the potential to result in a disruptive termination. With the XPR close to the divertor target, a new detached divertor concept, the compact radiative divertor, was developed. Here, the exhaust power is radiated before reaching the target, allowing close proximity of the X-point to the target. No limitations by the shallow field line angle due to the large flux expansion were observed, and sufficient compression of neutral density was demonstrated. With respect to the pumping of non-recycling impurities, the divertor enrichment was found to mainly depend on the ionisation energy of the impurity under consideration. In the area of MHD physics, analysis of the hot plasma core motion in sawtooth crashes showed good agreement with nonlinear 2-fluid simulations. This indicates that the fast reconnection observed in these events is adequately described including the pressure gradient and the electron inertia in the parallel Ohm’s law. Concerning disruption physics, a shattered pellet injection system was installed in collaboration with the ITER International Organisation. Thanks to the ability to vary the shard size distribution independently of the injection velocity, as well as its impurity admixture, it was possible to tailor the current quench rate, which is an important requirement for future large devices such as ITER. Progress was also made modelling the force reduction of VDEs induced by massive gas injection on AUG. The H-mode density limit was characterised in terms of safe operational space with a newly developed active feedback control method that allowed the stability boundary to be probed several times within a single discharge without inducing a disruptive termination. Regarding integrated operation scenarios, the role of density peaking in the confinement of the ITER baseline scenario (high plasma current) was clarified. The usual energy confinement scaling ITER98(p,y) does not capture this effect, but the more recent H20 scaling does, highlighting again the importance of developing adequate physics based models. Advanced tokamak scenarios, aiming at large non-inductive current fraction due to non-standard profiles of the safety factor in combination with high normalised plasma pressure were studied with a focus on their access conditions. A method to guide the approach of the targeted safety factor profiles was developed, and the conditions for achieving good confinement were clarified. Based on this, two types of advanced scenarios (‘hybrid’ and ‘elevated’

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Observation of a new pedestal stability regime in MAST Upgrade H-mode plasmas

Abstract The first pedestal stability and structure analysis on the new MAST Upgrade (MAST-U) spherical tokamak H-mode plasmas is presented. Our results indicate that MAST-U pedestals are close to the low toroidal mode number ( n ) peeling branch of the peeling-ballooning instability, in contrast with MAST H-mode pedestals which were deeply in the high- n ballooning branch. This offers the possibility of reaching the ELM-free quiescent H-mode (Burrell et al 2005 Plasma Phys. Control. Fusion 47 B37–B52) or high-performance super H-mode (Snyder et al 2015 Nucl. Fusion 55 083026; Snyder et al 2019 Nucl. Fusion 59 086017) regimes. In addition, the coupling between the peeling and ballooning branches is weak in MAST-U, suggesting that a path to very high pedestal pressure gradient at high density may exist with sufficient heating power. A possible explanation for the differences between MAST and MAST-U pedestal stability is given in terms of plasma shaping parameters, in particular squareness and elongation, as well as the pedestal top temperature and collisionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Constraint on Primordial B-modes from the First Flight of the Spider Balloon-borne Telescope

We present the first linear polarization measurements from the 2015 long-duration balloon flight of Spider, which is an experiment that is designed to map the polarization of the cosmic microwave background (CMB) on degree angular scales. The results from these measurements include maps and angular power spectra from observations of 4.8% of the sky at 95 and 150 GHz, along with the results of internal consistency tests on these data. While the polarized CMB anisotropy from primordial density perturbations is the dominant signal in this region of sky, Galactic dust emission is also detected with high significance. Galactic synchrotron emission is found to be negligible in the Spider bands. We employ two independent foreground-removal techniques to explore the sensitivity of the cosmological result to the assumptions made by each. The primary method uses a dust template derived from Planck data to subtract the Galactic dust signal. A second approach, which constitutes a joint analysis of Spider and Planck data in the harmonic domain, assumes a modified-blackbody model for the spectral energy distribution of the dust with no constraint on its spatial morphology. Using a likelihood that jointly samples the template amplitude and r parameter space, we derive 95% upper limits on the primordial tensor-to-scalar ratio from Feldman–Cousins and Bayesian constructions, finding r < 0.11 and r < 0.19, respectively. Roughly half the uncertainty in r derives from noise associated with the template subtraction. New data at 280 GHz from Spider's second flight will complement the Planck polarization maps, providing powerful measurements of the polarized Galactic dust emission.

79 ASTRONOMY AND ASTROPHYSICS↗