Search NASA⌕ Search

SEARCH · Search NASA

Results for “binaries: close”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Accurate equation of state of H 2 – He binary mixtures up to 5.4 GPa

Brillouin scattering spectroscopy has been used to obtain an accurate (<1%) ρ-P equation of state (EOS) of 1:1 and 9:1 H 2 -He molar mixtures from 0.5 to 5.4 GPa at 296 K. Our calculated equations of state indicate close agreement with the experimental data right to the freezing pressure of hydrogen at 5.4 GPa. The measured velocities agree on average, within 0.5%, of an ideal mixing model. The ρ-P EOSs presented have a standard deviation of under 0.3% from the measured densities and under 1% deviation from ideal mixing. Furthermore, a detailed discussion of the accuracy, precision, and sources of error in the measurement and analyses of our equations of state is presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Test beam performance of a CBC3-based mini-module for the Phase-2 CMS Outer Tracker before and after neutron irradiation

The Large Hadron Collider (LHC) at CERN will undergo majorupgrades to increase the instantaneous luminosity up to5–7.5×10$^{34}$ cm$^{-2}$s$^{-1}$. This High Luminosityupgrade of the LHC (HL-LHC) will deliver a total of3000–4000 fb$^{-1}$ of proton-proton collisions at acenter-of-mass energy of 13–14 TeV. To cope with thesechallenging environmental conditions, the strip tracker of the CMSexperiment will be upgraded using modules with two closely-spacedsilicon sensors to provide information to include tracking in theLevel-1 trigger selection. This paper describes the performance, ina test beam experiment, of the first prototype module based on thefinal version of the CMS Binary Chip front-end ASIC before and afterthe module was irradiated with neutrons. Results demonstrate thatthe prototype module satisfies the requirements, providing efficienttracking information, after being irradiated with a total fluencecomparable to the one expected through the lifetime of theexperiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

On numerical energy conservation for an implicit particle-in-cell method coupled with a binary Monte-Carlo algorithm for Coulomb collisions

We report conventional particle-in-cell (PIC) methods suffer from enhanced numerical heating (explicit PIC) or cooling (semi-implicit PIC) when coupled with a binary Monte-Carlo algorithm for Coulomb collisions. In this work, a fully-implicit θ-PIC scheme (with adjustable time-biasing parameter 1/2 ≤ θ ≤) is considered. The discrete change in energy of a closed system after a time step for this scheme scales with (1/2 - θ)C θ , where C θ is a positive definite quantity that depends on the frequency spectrum of the energy in the fields. Collisions lead to additional energy in the field fluctuations associated with high-frequency light waves produced by a numerical Bremsstrahlung process, which can result in a large increase in the numerical cooling rate for θ > 1/2. However, for θ = 1/2, energy is exactly conserved. The energy in the field fluctuations on long time scales agrees with that calculated using the equipartition theorem for a classical system in thermodynamic equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Quantum computing for a profusion of postman problem variants

In this paper we study the viability of solving the Chinese Postman Problem, a graph routing optimization problem, and many of its variants on a quantum annealing device. Routing problem variants considered include graph type, directionally varying weights, number of parties involved in routing, among others. We put emphasis on the explanation of how to convert such problems into quadratic unconstrained binary optimization (QUBO) problems. QUBO is one of two equivalent natural paradigms for quantum annealing devices, the other being the Ising Model. We also expand upon a previously discovered algorithm for solving the Chinese Postman Problem on a closed undirected graph to decrease the number of constraints and variables used in the problem. Optimal annealing parameter settings and constraint weight values are discussed based on results from implementation on the D-Wave 2000Q and Advantage. Results from classical, purely quantum, and hybrid algorithms are compared.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Topography restoration in white-light interferometry using an instrument transfer function evaluated with binary pseudo-random arrays

Accurate knowledge of the instrument transfer function (ITF) is vital for topography measurements using white-light interferometry (WLI). To this end, we derive a complete set of analytical expressions for the power spectral density (PSD) of a discretely sampled binary pseudo-random array (BPRA) as a theoretical benchmark. We then determine the ITF by comparing this theoretical PSD with the measured PSD of the BPRA. For the Zygo ZeGage Pro HR with a objective, the determined ITF closely matches the nominal modulation transfer function (MTF). Accordingly, we integrate the nominal MTF into Fourier-domain restoration filters and apply them to practical WLI topography data, yielding restored topographies that show improved agreement with atomic force microscopy measurements. Overall, our integrated BPRA-based ITF measurement and filtering methodology offers a robust yet practical means of characterizing WLI performance and enhancing the accuracy of surface measurements.

Hirose, Shigenobu [Japan Agency for Marine Earth S↗
DOE OSTI2025

Modeling ethanol/water adsorption in all-silica zeolites using the real adsorbed solution theory

A comprehensive set of single-component and binary isotherms were collected for ethanol/water adsorption into the siliceous forms of 185 known zeolites using grand-canonical Monte Carlo simulations. Using these data, a systematic analysis of ideal/real adsorbed-solution theory (IAST/RAST) was conducted and activity coefficients were derived for ethanol/water mixtures adsorbed in different zeolites based on RAST. It was found that activity coefficients of ethanol are close to unity while activity coefficients of water are larger in most zeolites, indicating a positive excess free energy of the mixture. This observation can be attributed to water/ethanol interactions being less favorable than water/water interactions in the single-component adsorption of water at comparable loadings. The deviation from ideal behavior can be highly structure-dependent but no clear correlation with pore diameters was identified. Furthermore, our analysis also demonstrates the following: (1) accurate unary isotherms in the low-loading regime are critical for obtaining physically sensible activity coefficients; (2) the global regression scheme to solve for activity model parameters performs better than fitting activity models to activity coefficients calculated locally at each binary state point; and (3) including the dependence on adsorption potential offers only a minor benefit for describing binary adsorption at the lowest fugacities. Finally, the Margules activity model was found incapable of capturing the non-ideal adsorption behavior over the entire range of fugacities and compositions in all zeolites, but for conditions typical of solution-phase adsorption, RAST predictions using zeolite-specific or even bulk Margules parameters provide an improved description compared to IAST.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Next-to-$\mathrm{MHV}$ Yang-Mills kinematic algebra

Kinematic numerators of Yang-Mills scattering amplitudes possess a rich Lie algebraic structure that suggest the existence of a hidden infinite-dimensional kinematic algebra. Explicitly realizing such a kinematic algebra is a longstanding open problem that only has had partial success for simple helicity sectors. In past work, we introduced a framework using tensor currents and fusion rules to generate BCJ numerators of a special subsector of NMHV amplitudes in Yang-Mills theory. Here we enlarge the scope and explicitly realize a kinematic algebra for all NMHV amplitudes. Master numerators are obtained directly from the algebraic rules and through commutators and kinematic Jacobi identities other numerators can be generated. Inspecting the output of the algebra, we conjecture a closed-form expression for the master BCJ numerator up to any multiplicity. We also introduce a new method, based on group algebra of the permutation group, to solve for the generalized gauge freedom of BCJ numerators. It uses the recently introduced binary BCJ relations to provide a complete set of NMHV kinematic numerators that consist of pure gauge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Precision cosmology with primordial GW backgrounds in presence of astrophysical foregrounds

The era of Gravitational-Wave (GW) astronomy will grant the detection of the astrophysical GW background from unresolved mergers of binary black holes, and the prospect of probing the presence of primordial GW backgrounds. In particular, the low-frequency tail of the GW spectrum for causally-generated primordial signals (like a phase transition) offers an excellent opportunity to measure unambiguously cosmological parameters as the equation of state of the universe, or free-streaming particles at epochs well before recombination. We discuss whether this programme is jeopardised by the uncertainties on the astrophysical GW foregrounds that coexist with a primordial background. We detail the motivated assumptions under which the astrophysical foregrounds can be assumed to be known in shape, and only uncertain in their normalisation. In this case, the sensitivity to a primordial signal can be computed by a simple and numerically agile procedure, where the optimal filter function subtracts the components of the astrophysical foreground that are close in spectral shape to the signal. We show that the degradation of the sensitivity to the signal in presence of astrophysical foregrounds is limited to a factor of a few, and only around the frequencies where the signal is closer to the foregrounds. Our results highlight the importance of modelling the contributions of eccentric or intermediate-mass black hole binaries to the GW background, to consolidate the prospects to perform precision cosmology with primordial GW backgrounds.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Fundamental Thermodynamic, Kinetic, and Mechanical Properties of Lithium and Its Alloys

Lithium alloying reactions are beneficial in promoting uniform plating and stripping of lithium metal in all-solid-state batteries. First-principles calculations are performed to predict thermodynamic, kinetic, and mechanical properties of lithium and several important Li–M alloys (M = Mg, Ag, Zn, Al, Ga, In, Sn, Sb, and Bi). While the Li–Mg binary system forms a solid solution, most other lithium–metal alloys prefer stoichiometric intermetallic compounds with common local motifs that enable fast Li diffusion. Lithium and Li-rich alloys exhibit an unusually flat energy landscape along paths that connect BCC to close-packed structures like FCC and HCP, with important implications for mechanical properties. Very low migration barriers for Li diffusion that rival those of superion conductors are predicted, both in pure Li and in Li–M intermetallics. However, vacancy concentration, which is crucial for substitutional diffusion, is predicted to be low in metallic Li and most Li–M intermetallics. Compounds such as B32 LiAl and LiGa as well as D0 3 Li 3 Sb and Li 3 Bi exhibit structural vacancies at higher ends of their voltage windows, which together with low migration barriers leads to exceptionally high Li mobilities. In the Li–Mg solid solution, the addition of Mg is found to decrease the vacancy tracer diffusion coefficient by an order of magnitude.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Calibration of the underground muon detector of the Pierre Auger Observatory

To obtain direct measurements of the muon content of extensive air showers with energy above 10 16.5 eV, the Pierre Auger Observatory is currently being equipped with an underground muon detector (UMD), consisting of 219 10 m 2 -modules, each segmented into 64 scintillators coupled to silicon photomultipliers (SiPMs). Direct access to the shower muon content allows for the study of both of the composition of primary cosmic rays and of high-energy hadronic interactions in the forward direction. As the muon density can vary between tens of muons per m 2 close to the intersection of the shower axis with the ground to much less than one per m 2 when far away, the necessary broad dynamic range is achieved by the simultaneous implementation of two acquisition modes in the read-out electronics: the binary mode, tuned to count single muons, and the ADC mode, suited to measure a high number of them. In this work, we present the end-to-end calibration of the muon detector modules: first, the SiPMs are calibrated by means of the binary channel, and then, the ADC channel is calibrated using atmospheric muons, detected in parallel to the shower data acquisition. The laboratory and field measurements performed to develop the implementation of the full calibration chain of both binary and ADC channels are presented and discussed. The calibration procedure is reliable to work with the high amount of channels in the UMD, which will be operated continuously, in changing environmental conditions, for several years.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

NbTaV_BCC_SolidSolution_128atoms_VASP6

We performed density functional theory (DFT) calculations for body-centered-cubic (BCC) structures with 128 lattices sites of solid solution ternary alloys niobium-tantalum-vanadium (Nb-Ta-V). The first-principle code that has been used to run the calculations is the closed-source Vienna Ab-Initio Simulation Package (VASP). The calculations have been collected by sampling chemical compositions across the entire compositional range. The chemical compositions have been sampled by progressively changing the number of atoms per constituent by 8. For each chemical composition of binaries and ternaries, the first-principle calculations have been run for 100 randomized arrangements of the constituents on the BCC lattice sites. We collected data for a total of 10,500 randomized atomic structures over 105 chemical compositions. The calculations have been collected on NERSC-Perlmutter using the VASP 6.3.2. The VASP calculations for every atomic structure have been performed in 2 main steps: 1. Starting from an ideal body-centered-cubic (BCC) structure, geometry optimization with low precision has been executed to perform a preliminary optimization of the atomic structure. The output for this calculations is available in the files 0.CONTCAR, 0.OUTCAR, rlx1.out. 2. Using the atomic structure resulting from the preliminary geometry optimization, a second geometry optimization has been performed using normal precision. The output for this calculations is available in the files CONTCAR, OUTCAR, rlx2.out, vaspout.h5, and vasprun.xml. Every chemical composition sampled across the composition range in the dataset has its own directory. The convention used to name the directories for ternary alloys is AXBYCZ, where A, B, and C refer to the constituents, and X, Y, and Z are positive integers that represent the number of atoms for each constituent and their values still sum up to 128. Each atomic structure associated with a specific chemical composition has its own sub-directory within the directory of the corresponding chemical composition. The sub-directories for each atomic structure for each chemical composition are named 'case-*', where * is a positive integer that spans all the values from 1 through 100, extremes included. The files contained in each sub-directory 'case-*' for each atomic structure are as follows: 1. INCAR: input file that contains various parameters and settings for controlling the behavior of the electronic structure calculations 2. 0.POSCAR: input file that defines the atomic structure of a system 3. 0.CONTCAR: output file that provides the atomic positions and cell parameters after the first geometry optimization has been run with the precision variable set to PREC=Low in the INCAR file 4. 0.OUTCAR: output file that contains detailed information about the progress of a calculation after the first geometry optimization has been run with the precision variable set to PREC=Low in the INCAR file 5. rlx1.out: file with diagnostic information about the execution of the first geometry optimization with precision variable set to PREC=Low in the INCAR file 6. POSCAR: input file that defines the atomic structure of a system after the first geometry optimization has been run at low precision. This represents the input for the second geometry optimization run with the precision variable set to PREC=Normal in the INCAR file 7. CONTCAR: output file that provides the atomic positions and cell parameters after the second geometry optimization has been run with the precision variable set to PREC=Normal in the INCAR file 8. OUTCARL: output file that contains detailed information about the progress of a calculation after the second geometry optimization has been run with the precision variable set to PREC=Normal in the INCAR file 9. rlx2.out: file with diagnostic information about the execution of the second geometry optimization with precision variable set to PREC=Normal in the INCAR file 10. vaspout.h5: hierarchical HDF5 file containing the inputs and outputs of a VASP calculation. To analyze the data in this file we recommend using py4vasp. This file is only produced if the VASP version used is compiled with HDF5 support 11. vasprun.xml: contains similar information to OUTCAR, but in an xml format. This research is sponsored by the Artificial Intelligence Initiative as part of the Laboratory Directed Research and Development (LDRD) Program of Oak Ridge National Laboratory, managed by UT-Battelle, LLC, for the US Department of Energy under contract DE-AC05-00OR22725. This work used resources of the Oak Ridge Leadership Computing Facility, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC05-00OR22725, under Directorate Discretionary awards MAT025 (Materials Science) and LRN026 (Machine Learning), and INCITE award MAT201. This work also used resources of the National Energy Research Scientific Computing Center, which is supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231, under award ERCAP0025216.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Thermal and Mechanical Energy Performance Analysis of Closed-loop Systems in Hot-Dry-Rock and Hot-Wet-Rock Reservoirs

To understand the potential and limitations for recovering thermal and mechanical energy from closed-loop geothermal systems a collaborative study is underway that will investigate an array of system configurations, working fluids, geothermal reservoir characteristics, operational periods, and heat transfer enhancements. Closed-loop geothermal systems are distinguished from hydrothermal or enhanced geothermal systems (EGS) in that the working fluid only circulates through drilled boreholes. Principal objectives of this study are to determine upper limits for thermal and mechanical energy recovery and optimal operational and configuration parameters for each scenario. Teams of scientists and engineers are applying a suite of numerical simulation and analytical tools to model the heat recovery from closed-loop geothermal systems, and then optimizing operational and configuration parameters to maximize the thermal and mechanical energy recovery. Results from the suite of numerical simulators and analytical tools, such as outlet and inlet states and temperature profiles in the geothermal reservoir over time are intercompared to increase confidence in the analysis. This paper documents the study findings for closed-loop systems in hot-dry-rock and hot-wet-rock reservoirs, where water is the working fluid. The characteristics of the hot-dry-rock reservoir were based on the U.S. Department of Energy's Utah Frontier Observatory for Research in Geothermal Energy (FORGE) site, near Milford Utah. Two objective functions are defined to optimize the operational and configuration parameters of the system, one each for the recovery of mechanical and thermal energy over the period of operation. For both objective functions, a surface plant thermal to mechanical energy conversion factor and an energy drilling cost is required. In keeping with the study objectives the surface plant conversion factor is determined from a second-law of thermodynamics analysis of a generic binary plant, and drilling costs are based on those from the Utah FORGE site and current national electrical costs.

closed-loop geothermal systems↗
DOE OSTI2026

Molecular dynamics simulations of reflection and sputtering behavior of boron under deuterium ion irradiation

Boronization is a commonly used method of wall conditioning in fusion reactors. The application of boron films to the plasma-facing materials results in enhanced plasma performance due to the reduction of intrinsic impurities. This is primarily driven by a reduction in oxygen content that is chemically trapped in the boron film. The reactive nature of these boron films also raises questions concerning interactions with hydrogen isotopes. In this work, boron-deuterium interactions were studied using molecular dynamics (MD). Reactive force field potentials were used to model the chemical interactions between B and D. An amorphous boron substrate was irradiated by D atoms at varying incident energies, 10 eV < E i < 150 eV and angles, 0° < α < 85°. The reflection probability was calculated and compared to results from the commonly-used binary collision approximation (BCA) method. This comparison found that the BCA underestimated the reflection probability at E i < 35 eV and α > 45 ∘ . The source of this discrepancy was found to be the surface binding energy model. The BCA calculation with an isotropic surface binding energy model was more closely aligned to the MD result. This, in combination with a correction function based on the MD results allows for corrections to the reflection probability of deuterium impinging on boron surfaces. The sputtering of the substrate material was also studied. While this study did not contain sufficient events to quantitatively describe the sputtering behavior, some qualitative results emerged: namely, chemical sputtering of B and D-containing molecules (BD, BD 2 , BD 3 ) at low ( < 20 eV) incident deuterium energies. This result suggests that chemical sputtering could be a significant factor in limiting boron coating lifetime when exposed to lower ion energies, such as those in detached plasmas. The results show that chemical interactions should be taken into account when modeling the interactions between D ions and B surfaces.

Boron↗
DOE OSTI2025

Mapping in situ the assembly and dynamics in aqueous supramolecular polymers

Supramolecular polymers, bonded through directional non-covalent interactions, closely mimic dynamic behaviors of biological nanofibers. However, the complexity of assembly pathways makes it highly challenging to unravel the nature of supramolecular dynamics in aqueous environments. Here we introduce a precise combinatorial titration methodology to probe in situ the assembly of peptide amphiphiles (PAs). This approach reveals a binary assembly mechanism governed by equilibrium between spheroidal micelles and β-sheet polymers. Weakening hydrogen bonding shifts the equilibrium towards micelles and decreases the internal structural order of filamentous polymers, promoting supramolecular dynamics. Extending this methodology to two-component copolymerization systems, we find a surprising tendency to form blocky nanostructures with reduced internal phase separation as the mismatch in peptide sequence decreases. Interestingly, while well-mixed copolymers acquire different dynamics, mismatched ones retain the characteristic supramolecular motion of their homopolymer counterparts. These critical insights into supramolecular dynamics offer strategies to tailor the dynamic functions of supramolecular nanomaterials.

Molecular self-assembly↗
DOE OSTI2024

Subphotospheric Emission from Short Gamma-Ray Bursts: Protons Mold the Multimessenger Signals

Abstract The origin of the observed Band-like photon spectrum in short gamma-ray bursts (sGRBs) is a long-standing mystery. We carry out the first general relativistic magnetohydrodynamic simulation of an sGRB jet with initial magnetizationσ 0 = 150 in dynamical ejecta from a binary merger. From this simulation, we identify regions along the jet of efficient energy dissipation due to magnetic reconnection and collisionless subshocks. Taking into account electron and proton acceleration processes, we solve for the first time the coupled transport equations for photons, electrons, protons, neutrinos, and intermediate particle species up to close to the photosphere (i.e., up to 1 × 10 12 cm), accounting for all relevant radiative and cooling processes. We find that the subphotospheric multimessenger signals carry strong signatures of the hadronic interactions and their resulting particle cascades. Importantly, the spectral energy distribution of photons is significantly distorted with respect to the Wien one, commonly assumed below the photosphere. Our findings suggest that the bulk of the nonthermal photon spectrum observed in sGRBs can stem from hadronic processes occurring below the photosphere and previously neglected, with an accompanying energy flux of neutrinos peaking in the GeV energy range.

Astronomy & Astrophysics↗
DOE OSTI2023

Spectroscopic Analysis of Milky Way Outer Halo Satellites: Aquarius II and Boötes II

In this paper, we present a chemical and kinematic analysis of two ultrafaint dwarf galaxies (UFDs), Aquarius II (Aqu II) and Boötes II (Boo II), using Magellan/IMACS spectroscopy. We present the largest sample of member stars for Boo II (12), and the largest sample of red giant branch members with metallicity measurements for Aqu II (eight). In both UFDs, over 80% of targets selected based on Gaia proper motions turned out to be spectroscopic members. In order to maximize the accuracy of stellar kinematic measurements, we remove the identified binary stars and RR Lyrae variables. For Aqu II, we measure a systemic velocity of -65.3 ± 1.8 km s-1 and a metallicity of [Fe/H] = $-2.57^{+0.17}_{-0.17}$. When compared with previous measurements, these values display a ~6 km s -1 difference in radial velocity and a decrease of 0.27 dex in metallicity. Similarly for Boo II, we measure a systemic velocity of $-130.4^{+1.4}_{-1.1}$ km s -1 , more than 10 km s -1 different from the literature, a metallicity almost 1 dex smaller at [Fe/H] = $-2.71^{+0.11}_{-0.10}$, and a velocity dispersion 3 times smaller at σ v hel = $2.9^{+1.6}_{-1.2}$km s -1 . Additionally, we derive systemic proper-motion parameters and model the orbits of both UFDs. Finally, we highlight the extremely dark-matter-dominated nature of Aqu II and compute the J-factor for both galaxies to aid searches of dark matter annihilation. Despite the small size and close proximity of Boo II, it is an intermediate target for the indirect detection of dark matter annihilation due to its low-velocity dispersion and corresponding low dark matter density.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Automated detection of double nuclei galaxies using GOTHIC and the discovery of a large sample of dual AGN

We present a novel algorithm to detect double nuclei galaxies (DNG) called Gothic (Graph-bOosTed iterated HIll Climbing) – that detects whether a given image of a galaxy has two or more closely separated nuclei. Our aim is to test for the presence of dual/multiple active galactic nuclei (AGN) in galaxies that visually represent a DNG. Although galaxy mergers are common, the detection of dual AGN is rare. Their detection is very important as they help us understand the formation of supermassive black hole (SMBH) binaries, SMBH growth and AGN feedback effects in multiple nuclei systems. There is thus a need for an algorithm to do a systematic survey of existing imaging data for the discovery of DNGs and dual AGNs. We have tested Gothic on an established sample of DNGs with a 100 per cent detection rate and subsequently conducted a blind search of 1 million SDSS DR16 galaxies (with spectroscopic data available) lying in the redshift range of z = 0 to 0.75. From the list of candidate DNGs found, we have detected 159 dual AGNs, of which 2 are triple AGN systems. Our results show that dual AGNs are not common, and triple AGN even rarer. The colour (u–r) magnitude plots of the DNGs indicate that star formation is quenched as the nuclei come closer and as the AGN fraction increases. The quenching is especially prominent for dual/triple AGN galaxies that lie at the extreme end of the red sequence.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Foot-scale Evaluation of CO2-Responsive Polymer and CO2 Binary Fluid as an Alternative Fracturing Fluid for Enhanced Geothermal Systems

A foot-scale high-temperature true-triaxial fracturing apparatus was used to conduct hydraulic fracture tests on rock samples. The fracturing tests used different fluids including water, CO2, CO2 with water, and CO2 with a 1% polyallylamine (PAA)/water solution. The tests were conducted with both constant pressure injection and constant flow rate injection modes. CO2-based fracturing fluids were found to produce higher breakdown pressures, high transient flow rates, and produce higher-conductivity fractures as compared to water-based fracturing fluids. Additionally, faster pressurization rates with CO2-based fracturing fluids (obtained when fracturing at constant flow rate mode) are found to be associated with higher fracture conductivities. When fracturing with CO2-based fluids in the presence of a PAA aqueous solution, for example if the rock is saturated with 1wt% PAA in water, the volume expansion caused by CO2-induced crosslinking of PAA leads to a faster pressure increase due to the associated volume expansion and increase in viscosity. It was also found that CO2 as a fracturing fluid injected in hot dry rock (HDR) attain the highest fracture conductivity only when injected at very high flow rates, followed very closely by the CO2/PAA fracturing fluid system that generates fractures with, on average, similarly high conductivity values though independently of injection flow rate and using 1/6 of the mass of CO2 as compared to CO2 in HDR. Breakdown pressures were also similar for CO2 stimulation in HDR and CO2/PAA fluid system under identical injection flow rates. Finally, the well-known low viscosity of CO2 phase prevents the efficient transport of proppants while the reacted CO2/PAA fluid system is known to form a high viscosity binary fracturing fluid system with the potential to carry proppant in addition of being a fine fracturing fluid.

Enhanced Geothermal Systems, polyallylamine, Co2-r↗