Search NASA⌕ Search

SEARCH · Search NASA

Results for “biomass pretreatment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Pretreatment with Sodium Methyl Mercaptide Increases Carbohydrate Yield during Kraft Pulping

Kraft pulping is the predominant technology in the pulp and paper industry for removing lignin from wood carbohydrates to produce paper, board, packaging, tissue, and specialty cellulose. However, the kraft process is energy intensive and expensive, and its yield is limited by the degradation of carbohydrates. Pretreatment can increase carbohydrate yield by limiting degradation via primary peeling of reducing end groups. However, protection of galactoglucomannan (GGM), the primary hemicellulose component of softwood, is minimal when conventional pretreatments are used. Here, we investigated the effectiveness of sodium methyl mercaptide pretreatment on southern pine wood chips under a range of experimental conditions. We found that pretreatment of biomass with 4.38% sodium methyl mercaptide at pH 12 and 105 °C for 60 min provided small but significant increases in xylan and cellulose yields relative to control conditions, but preservation of GGM was minimal. Furthermore, to provide insight into molecular-scale details of primary peeling, pretreatment, and alkaline hydrolysis, we performed classical molecular dynamics (MD) simulations under selected process conditions and quantum mechanical (QM) calculations of selected reactions. MD simulations showed that C1 of the GGM reducing end is more readily accessible by HO – and CH 3 S – ions than in cellulose. The free energy barrier for peeling calculated with QM is lower for GGM than for cellulose, indicating increased susceptibility to peeling. In addition, we found that GGM may be more susceptible to internal chain cleavage than cellulose. Thus, even though reducing end groups may be protected initially through pretreatment, new unprotected reducing end groups may be generated through alkaline hydrolysis. Taken together, these findings show the promise of methyl mercaptide as a pretreatment technology for cellulose retention and also provide molecular insight for improving its effectiveness toward GGM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Data for A Chemical-Free Pretreatment for Biosynthesis of Bioethanol and Lipids from Lignocellulosic Biomass: An Industrially Relevant 2G Biorefinery Approach

A wide range of inorganic and organic chemicals are used during the pretreatment and enzymatic hydrolysis of lignocellulosic biomass to produce biofuels. Developing an industrially relevant 2G biorefinery process using such chemicals is challenging and requires more unit operations for downstream processing. A sustainable process has been developed to achieve industrially relevant titers of bioethanol with significant ethanol yield. The pretreatment of sorghum biomass was performed by a continuous pilot-scale hydrothermal reactor followed by disk milling. Enzymatic hydrolysis was performed without washing the pretreated biomass. Moreover, citrate buffer strength was reduced to 100-fold (50 mM to 0.5 mM) during the enzymatic hydrolysis. Enzymatic hydrolysis at 0.5 mM citrate buffer strength showed that significant sugar concentrations of 222 ± 2.3 to 241 ± 2.3 g/L (glucose + xylose) were attained at higher solids loadings of 50 to 60% (w/v). Furthermore, hydrolysates were fermented to produce bioethanol using two different xylose-fermenting Saccharomyces cerevisiae strains and a co-culture of xylose-fermenting and non-GMO yeast cultures. Bioethanol titer of 81.7 g/L was achieved with an ethanol yield of 0.48 gp/gs. Additionally, lipids were produced using the oleaginous yeast Rhodosporidium toruloides , yielding 13.2 g/L lipids with cellular lipid accumulation of 38.5% w/w from 100 g/L of sugar concentration. In summary, reducing the strength of the citrate buffer during enzymatic hydrolysis and omitting inorganic chemicals from the pretreatment process enhances the fermentability of hydrolysates and can also reduce operating costs.

Conversion↗
DOE OSTI2022

A Chemical-Free Pretreatment for Biosynthesis of Bioethanol and Lipids from Lignocellulosic Biomass: An Industrially Relevant 2G Biorefinery Approach

A wide range of inorganic and organic chemicals are used during the pretreatment and enzymatic hydrolysis of lignocellulosic biomass to produce biofuels. Developing an industrially relevant 2G biorefinery process using such chemicals is challenging and requires more unit operations for downstream processing. A sustainable process has been developed to achieve industrially relevant titers of bioethanol with significant ethanol yield. The pretreatment of sorghum biomass was performed by a continuous pilot-scale hydrothermal reactor followed by disk milling. Enzymatic hydrolysis was performed without washing the pretreated biomass. Moreover, citrate buffer strength was reduced to 100-fold (50 mM to 0.5 mM) during the enzymatic hydrolysis. Enzymatic hydrolysis at 0.5 mM citrate buffer strength showed that significant sugar concentrations of 222 ± 2.3 to 241 ± 2.3 g/L (glucose + xylose) were attained at higher solids loadings of 50 to 60% (w/v). Furthermore, hydrolysates were fermented to produce bioethanol using two different xylose-fermenting Saccharomyces cerevisiae strains and a co-culture of xylose-fermenting and non-GMO yeast cultures. Bioethanol titer of 81.7 g/L was achieved with an ethanol yield of 0.48 gp/gs. Additionally, lipids were produced using the oleaginous yeast Rhodosporidium toruloides, yielding 13.2 g/L lipids with cellular lipid accumulation of 38.5% w/w from 100 g/L of sugar concentration. In summary, reducing the strength of the citrate buffer during enzymatic hydrolysis and omitting inorganic chemicals from the pretreatment process enhances the fermentability of hydrolysates and can also reduce operating costs.

Deshavath, Narendra Naik↗
DOE OSTI2022

Bioprocessing, Recovery, and Mass Balance of Vegetative Lipids from Metabolically Engineered “Oilcane” Demonstrates Its Potential as an Alternative Feedstock for Drop-In Fuel Production

Plant oils are increasingly in demand as renewable feedstocks for biodiesel and biochemicals. Currently, oilseeds are the primary source of plant oils. Although the vegetative tissues of plants express lipid metabolism pathways, they do not hyper- accumulate lipids. Elevated synthesis, storage, and accumulation of lipids in vegetative tissues have been achieved by metabolic engineering of sugarcane to produce “oilcane”. This study evaluates the potential of oilcane as a renewable feedstock for the co- production of lipids and fermentable sugars. Oilcane was grown under favorable climatic and field conditions in Florida (FLOC) as well as during an abbreviated growing season, outside its typical growing region, in Illinois (ILOC). The potential lipid yield of 0.35 tons/ha was projected from the hyperaccumulation of fatty acids in the stored vegetative biomass of FLOC, which is approaching the lipid yield of soybean (0.44 tons/ha). Processing of the vegetative tissues of oilcane recovered 0.20 tons/ha, which represents the recovery of 55% of the total lipids from FLOC. Chemical-free hydrothermal bioprocessing of ILOC and FLOC bagasse and leaves at 180 °C for 10 min prevented the degeneration of in situ plant lipids. Here, this allowed the recovery of lipids at the end of the bioprocess with a major fraction of lipids remaining in the biomass residues after pretreatment and saccharification. Improvements through refined biomass processing, crop management, and metabolic engineering are expected to boost lipid yields and make oilcane a prime feedstock for the production of biodiesel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bioleaching to produce clean loblolly pine for thermochemical conversion

Lignocellulosic biomass contains inorganic elements that could induce slagging, ash fouling, and emission of both corrosive and harmful gases during thermochemical conversion. Water leaching pretreatment can remove most of the water-soluble elements, while it has limited industrial applicability due to its ineffectiveness in removing water-insoluble elements. Bioleaching is an alternative pretreatment method which has not been fully studied. In this work, bioleaching by Aspergillus niger strains NRRL 2001, NRRL 3122, and NRRL 567 was conducted to pretreat loblolly pine biomass with added water. Further, the removal of inorganic elements (K, Ca, Mg, and S) by bioleaching with A. niger NRRL 2001 was compared with chemical leaching with citric acid, HCl, and NaOH. It was shown that the pH reduction during bioleaching greatly improved K and Mg leaching to the point comparable to acid leaching, whereas Ca was precipitated by oxalic acid produced by the fungus. Bioleaching was also conducted in manually separated needles and chips components of loblolly pine. Glucose was added at different levels to assist bioleaching. At higher glucose levels, gluconic acid and citric acid were produced during bioleaching, leading to the increase of K, Ca, and Mg removal rates by more than 35%, 180%, and 390%, respectively, from the feedstock as compared with water leaching. Overall, bioleaching greatly improved removal of K, Ca, Mg, but not S from loblolly pine feedstocks as compared with water leaching.

09 BIOMASS FUELS↗
DOE OSTI2023

Towards the sustainable conversion of corn stover into bioenergy and bioproducts through biochemical route: Technical, economic and strategic perspectives

Corn stover (CS) is one of the most abundant agricultural wastes and is ubiquitous around the world that is left over after grain harvest and accounts for 47–50% dry mass of the total grain yield. The global CS yield is 1661.25 million tons/year, which is 27.2% of the total agricultural waste. CS consists of about 34.5% stems, 32.3% leaves, 14.3% husks, 12.3% cobs and 6.6% flowers, with up to 45% cellulose, 30% hemicellulose and 20% lignin. Further, due to its favorable economic and environmental potential, CS is considered an ideal raw material for producing biofuels and biobased chemicals, which can largely be divided into carbohydrate and lignin platforms. However, the techno-economic perspectives of CS-based biorefineries have remained questionable due to the inadequate supply chain logistics, lack of cost-effective conversion technologies, limited scale-up of the product-specific technologies, and lower competitiveness in the market compared to their counterparts, such as sugar and starch-based biorefineries. While CS is converted by thermochemical and biochemical approaches, the latter is considered to be more sustainable for its selective conversion under mild conditions using microorganisms. This review aimed to critically discuss the latest research and developments on the biochemical conversion of CS into biofuels and chemicals. In particular, this paper covers the market potential of biofuels and chemicals to which CS can make a significant contribution, technological developments in the microbial conversion of CS, major biofuels and chemicals produced from CS-derived carbohydrates and lignin, and the technoeconomic perspectives of CS-based biorefinery.

09 BIOMASS FUELS↗
DOE OSTI2022

Poplar lignin structural changes during extraction in γ-valerolactone (GVL)

In this paper, we describe an approach for producing both high quality and high quantity of lignin through studying the structural change of lignin during treatment of poplar wood in γ-valerolactone (GVL) for a range of temperatures (from 80 to 120 °C) and reaction time at temperature (from 1 to 24 h). Throughout the study, various techniques, including nuclear magnetic resonance (NMR) spectroscopies (solution- and gel-state 1 H –13 C 2D HSQC and 31 P) and gel-permeation chromatography (GPC) were applied to characterize the lignin structures. As the GVL-extracted lignin yield increases, the level of β-ether units decreases and the level of condensation products increases. The β-ether content, the aliphatic hydroxyl group content, and the molecular weight of the GVL-extracted lignin fractions were close to the poplar lignin from other preparation methods (e.g., enzyme lignin). A two-step hydrolytic process (120 °C, 2 × 15 min) gave a higher lignin yield (56.5% vs. 54.8%) with three times higher β-ether content (31.9% vs. 10.6%) than lignin extracted from a single-step process at 120 °C for 1 h. The results demonstrate that multiple-step cycling of cosolvent-assisted hydrolysis can help preserve more of the virgin ether-bond structures of GVL-extracted poplar lignin. Such a strategy can also be applied to a fully continuous-flow reactor system in future research to further improve both the productivity and quality of GVL-extracted lignin.

2D HSQC NMR↗
DOE OSTI2024

Sustainable production of 2,3,5,6-Tetramethylpyrazine at high titer in engineered Corynebacterium glutamicum

The industrial amino acid production workhorse, Corynebacterium glutamicum naturally produces low levels of 2,3,5,6-tetramethylpyrazine (TMP), a valuable flavor, fragrance, and commodity chemical. Here, we demonstrate TMP production (~0.8 g L –1 ) in C. glutamicum type strain ATCC13032 via overexpression of acetolactate synthase and/or α-acetolactate decarboxylase from Lactococcus lactis in CGXII minimal medium supplemented with 40 g L –1 glucose. This engineered strain also demonstrated growth and TMP production when the minimal medium was supplemented with up to 40% (v v –1 ) hydrolysates derived from ionic liquid-pretreated sorghum biomass. Further, a key objective was to take the fully engineered strain developed in this study and interrogate medium parameters that influence the production of TMP, a critical post-strain engineering optimization. Design of experiments in a high-throughput plate format identified glucose, urea, and their ratio as significant components affecting TMP production. These two components were further optimized using response surface methodology. In the optimized CGXII medium, the engineered strain could produce up to 3.56 g L –1 TMP (4-fold enhancement in titers and 2-fold enhancement in yield, mol mol –1 ) from 80 g L –1 glucose and 11.9 g L –1 urea in shake flask batch cultivation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Cellulosic biofuel production using emulsified simultaneous saccharification and fermentation (eSSF) with conventional and thermotolerant yeasts

Abstract Background Future expansion of corn-derived ethanol raises concerns of sustainability and competition with the food industry. Therefore, cellulosic biofuels derived from agricultural waste and dedicated energy crops are necessary. To date, slow and incomplete saccharification as well as high enzyme costs have hindered the economic viability of cellulosic biofuels, and while approaches like simultaneous saccharification and fermentation (SSF) and the use of thermotolerant microorganisms can enhance production, further improvements are needed. Cellulosic emulsions have been shown to enhance saccharification by increasing enzyme contact with cellulose fibers. In this study, we use these emulsions to develop an emulsified SSF (eSSF) process for rapid and efficient cellulosic biofuel production and make a direct three-way comparison of ethanol production between S. cerevisiae , O. polymorpha , and K. marxianus in glucose and cellulosic media at different temperatures. Results In this work, we show that cellulosic emulsions hydrolyze rapidly at temperatures tolerable to yeast, reaching up to 40-fold higher conversion in the first hour compared to microcrystalline cellulose (MCC). To evaluate suitable conditions for the eSSF process, we explored the upper temperature limits for the thermotolerant yeasts Kluyveromyces marxianus and Ogataea polymorpha , as well as Saccharomyces cerevisiae , and observed robust fermentation at up to 46, 50, and 42 °C for each yeast, respectively. We show that the eSSF process reaches high ethanol titers in short processing times, and produces close to theoretical yields at temperatures as low as 30 °C. Finally, we demonstrate the transferability of the eSSF technology to other products by producing the advanced biofuel isobutanol in a light-controlled eSSF using optogenetic regulators, resulting in up to fourfold higher titers relative to MCC SSF. Conclusions The eSSF process addresses the main challenges of cellulosic biofuel production by increasing saccharification rate at temperatures tolerable to yeast. The rapid hydrolysis of these emulsions at low temperatures permits fermentation using non-thermotolerant yeasts, short processing times, low enzyme loads, and makes it possible to extend the process to chemicals other than ethanol, such as isobutanol. This transferability establishes the eSSF process as a platform for the sustainable production of biofuels and chemicals as a whole.

09 BIOMASS FUELS↗
DOE OSTI2022

Data for Bioprocessing, Recovery, and Mass Balance of Vegetative Lipids from Metabolically Engineered ‘Oilcane’ Demonstrates Its Potential as an Alternative Feedstock for Drop-In Fuel Production

Plant oils are increasingly in demand as renewable feedstocks for biodiesel and biochemicals. Currently, oilseeds are the primary source of plant oils. Although the vegetative tissues of plants express lipid metabolism pathways, they do not hyper-accumulate lipids. Elevated synthesis, storage, and accumulation of lipids in vegetative tissues have been achieved by metabolic engineering of sugarcane to produce “oilcane.” This study evaluates the potential of oilcane as a renewable feedstock for the co-production of lipids and fermentable sugars. Oilcane was grown under favorable climatic and field conditions in Florida (FLOC) as well as during an abbreviated growing season, outside its typical growing region, in Illinois (ILOC). The potential lipid yield of 0.35 tons/ha was projected from the hyperaccumulation of fatty acids in the stored vegetative biomass of FLOC, which is approaching the lipid yield of soybean (0.44 tons/ha). Processing of the vegetative tissues of oilcane recovered 0.20 tons/ha, which represents the recovery of 55% of the total lipids from FLOC. Chemical-free hydrothermal bioprocessing of ILOC and FLOC bagasse and leaves at 180 °C for 10 min prevented the degeneration of in situ plant lipids. This allowed the recovery of lipids at the end of the bioprocess with a major fraction of lipids remaining in the biomass residues after pretreatment and saccharification. Improvements through refined biomass processing, crop management, and metabolic engineering are expected to boost lipid yields and make oilcane a prime feedstock for the production of biodiesel.

Conversion↗
DOE OSTI2023

Data for Production of Designer Xylose-Acetic Acid Enriched Hydrolysate from Bioenergy Sorghum, Oilcane, and Energycane Bagasses

Xylan accounts for up to 40% of the structural carbohydrates in lignocellulosic feedstocks. Along with xylan, acetic acid in sources of hemicellulose can be recovered and marketed as a commodity chemical. Through vibrant bioprocessing innovations, converting xylose and acetic acid into high-value bioproducts via microbial cultures improves the feasibility of lignocellulosic biorefineries. Enzymatic hydrolysis using xylanase supplemented with acetylxylan esterase (AXE) was applied to prepare xylose-acetic acid enriched hydrolysates from bioenergy sorghum, oilcane, or energycane using sequential hydrothermal-mechanical pretreatment. Various biomass solids contents (15 to 25%, w/v) and xylanase loadings (140 to 280 FXU/g biomass) were tested to maximize xylose and acetic acid titers. The xylose and acetic acid yields were significantly improved by supplementing with AXE. The optimal yields of xylose and acetic acid were 92.29% and 62.26% obtained from hydrolyzing energycane and oilcane at 25% and 15% w/v biomass solids using 280 FXU xylanase/g biomass and AXE, respectively.

Biomass Analytics↗
DOE OSTI2021

Computational Fluid Dynamics Simulation of Compressible Non-Newtonian Biomass in a Compression-Screw Feeder

Compression-screw feeders play a critical role in biorefineries to transport lignocellulosic biomass feedstocks from the feeding hoppers to biomass-conversion reactors in order to pretreat and convert biomass to hydrocarbon liquid biofuels and other power and energy resources. One of the main challenges in the operation of screw feeder is plugging and jamming of compressed biomass with high concentration of insoluble solids. The focus of this paper is to numerically investigate the screw feeder at these challenging operating conditions and help with the optimization of the screw feeder design to avoid operation failure. In this work a customized CFD model based on open-source OpenFOAM package [1] was developed to simulate the concentrated biomass as a highly viscous non-Newtonian fluid in the screw feeder. The biomass is modeled as a single-phase compressible Bingham fluid with a plastic viscosity as well as a density-dependent yield stress. The compressibility formulation (pressure-dependent density) and the density-dependent yield stress formulation in the governing equations follow the suggestions from a recent study by Duncan et al. [2]. A pilot-scale hopper/screw feeding system at NREL [3] is used to compare the experimental observations with our simulation results. The auger is 280 mm long and tapered with outer diameter changing from 80 mm to 35 mm. The auger rotates from 10 to 60 rpm in a conical throat which contains anti-rotational bars. The simulations predicted the required torque for the screw feeder and the pressure increase at the exit for biomass feedstocks with various fluid viscosity properties and auger rotating speeds. The analysis of the stress forces helped to identify the critical conditions were the screw feeder excessive wear or jamming could occur.

biofuels↗
DOE OSTI2026

Production of Renewable Solvents and Monomers from Lignocellulosic Feedstocks

Lignocellulosic biomass is pretreated and broken down into cellulosic sugars. The cellulosic sugars are converted to mevalonolactone (MVL) using Visolis’ proprietary microbes. The MVL containing broth is separated from the cells, deashed-decolorized, concentrated and fed into a catalytic reactor to develop anhydro mevalonolactone (aMVL), and 3-methyl pentanediol (3MPD). The products were separated by distillation into high purity compounds as solvent or polymer applications.

3-methyl pentanediol, polymer, solvent↗
DOE OSTI2021

THF co-solvent pretreatment prevents lignin redeposition from interfering with enzymes yielding prolonged cellulase activity

Background: Conventional aqueous dilute sulfuric acid (DSA) pretreatment of lignocellulosic biomass facilitates hemicellulose solubilization and can improve subsequent enzymatic digestibility of cellulose to fermentable glucose. However, much of the lignin after DSA pretreatment either remains intact within the cell wall or readily redeposits back onto the biomass surface. This redeposited lignin has been shown to reduce enzyme activity and contribute to rapid enzyme deactivation, thus, necessitating significantly higher enzyme loadings than deemed economical for biofuel production from biomass. Results: In this study, we demonstrate how detrimental lignin redeposition on biomass surface after pretreatment can be prevented by employing Co-solvent Enhanced Lignocellulosic Fractionation (CELF) pretreatment that uses THF–water co-solvents with dilute sulfuric acid to solubilize lignin and overcome limitations of DSA pretreatment. We first find that enzymatic hydrolysis of CELF-pretreated switchgrass can sustain a high enzyme activity over incubation periods as long as 5 weeks with enzyme doses as low as 2 mg protein/g glucan to achieve 90% yield to glucose. A modified Ninhydrin-based protein assay revealed that the free-enzyme concentration in the hydrolysate liquor, related to enzyme activity, remained unchanged over long hydrolysis times. DSA-pretreated switchgrass, by contrast, had a 40% drop in free enzymes in solution during incubation, providing evidence of enzyme deactivation. Furthermore, measurements of enzyme adsorption per gram of lignin suggested that CELF prevented lignin redeposition onto the biomass surface, and the little lignin left in the solids was mostly integral to the original lignin–carbohydrate complex (LCC). Scanning electron micrographs and NMR characterization of lignin supported this observation. Conclusions: Enzymatic hydrolysis of solids from CELF pretreatment of switchgrass at low enzyme loadings was sustained for considerably longer times and reached higher conversions than for DSA solids. Analysis of solids following pretreatment and enzymatic hydrolysis showed that prolonged cellulase activity could be attributed to the limited lignin redeposition on the biomass surface making more enzymes available for hydrolysis of more accessible glucan.

09 BIOMASS FUELS↗
DOE OSTI2021

Deconstruction of Woody Biomass via Protic and Aprotic Ionic Liquid Pretreatment for Ethanol Production

Ionic liquids (ILs) have emerged as important solvents for conversion of lignocellulosic feedstocks to fuels and chemicals due to their ability to enable efficient biomass deconstruction and fractionation. Woody biomass derived from forest and agricultural residues has the potential to be used for production of biofuels and its removal from forests can help mitigate disastrous wildfires in fire-prone states like California. This study evaluated woody biomass types (pine, almond, walnut, and fir) from California as potential biofuel feedstocks. The feedstocks were pretreated with the ILs cholinium lysinate ([Ch][Lys]) and ethanolamine acetate ([EOA][OAc]), followed by enzymatic hydrolysis and fermentation of lignocellulosic sugars to produce ethanol. Under optimal conditions, [EOA][OAc] pretreatment and enzymatic hydrolysis generated glucose and xylose yields in the range of 24-82 and 14-80%, respectively, while glucose and xylose yields for the [Ch][Lys] ranged between 28-83 and 23-80%, respectively. Maximum fermentable sugar was released from almond wood, and the lowest amount was from pine and fir. Further, blends of feedstocks were also explored, and a blend with a mass ratio of 2/2/1 (almond/walnut/pine) resulted in maximum glucose and xylose (>90%) yields using [Ch][Lys]. Fermentation of this hydrolysate using a C5-utilizing strain of Saccharomyces cerevisiae resulted in a maximum ethanol concentration of 17.9 g/L for mixture biomass hydrolysate, corresponding to 60.8% fermentation efficiency. This study represents the first demonstration of the use of these ILs for pretreatment of woody biomass blends that resulted in a high overall conversion efficiency for ethanol production.

09 BIOMASS FUELS↗
DOE OSTI2019

Pretreatments for the continuous production of pyrolytic sugar from lignocellulosic biomass

Fast pyrolysis of lignocellulosic biomass yields little sugar or anhydrosugars compared to pyrolysis of pure polysaccharides because naturally abundant alkali and alkaline earth metals (AAEM) in biomass catalyze the fragmentation of pyranose and furanose rings. Sugar yields can be increased dramatically by pretreating the biomass with sulfuric acid prior to pyrolysis, which passivates the catalytic activity of the metals by converting them into thermally stable salts. However, depolymerization of lignin in biomass also depends on the catalytic activity of AAEM. Thus, passivating AAEM has the unintended consequence of slowing the rate of depolymerization and volatilization of lignin, resulting in a transient melt phase that agglomerates and can foul pyrolysis reactors. Here, to overcome this problem, various non-alkali metal sulfates were tested as replacements for sulfuric acid. Iron in the form of ferrous sulfate proved the most effective in depolymerizing lignin without fragmenting pyranose rings. Conventional nitrogen-blown pyrolysis of ferrous sulfate pretreated corn stover achieved WHSV of 4 h –1 compared to only 0.6 h –1 for acid pretreated corn stover. Autothermal (air-blown) pyrolysis of ferrous sulfate pretreated corn stover showed even more dramatic improvement, increasing WHSV from 1 h –1 to 10 h –1 compared to acid pretreated corn stover under autothermal operation. Fermentable sugar yields from the pyrolysis of corn stover increased from 0.9 wt% to 11.8 wt% on a biomass basis, a 13-fold increase as a result of the ferrous sulfate pretreatment. These advantages combine to increase volumetric sugar productivity from 62 g L –1 h –1 for conventional pyrolysis of untreated corn stover to 2041 g L –1 h –1 for autothermal pyrolysis of ferrous sulfate treated corn stover.

09 BIOMASS FUELS↗
DOE OSTI2025

Research progress on organic acid pretreatment of lignocellulose

Lignocellulosic biomass is a naturally occurring, renewable resource that is utilized to produce a variety of high–value-added products, such as fuels, acids, and building block chemicals. The pretreatment of lignocellulosic biomass is a crucial step in the deconstruction and fractionation of its components. Organic acids, such as formic, acetic, lactic, and maleic acids, have been widely studied for their effectiveness in lignocellulose pretreatment. Organic acid–based pretreatment techniques are gaining increased attention due to their ability to selectively separate hemicellulose and cellulose, promote oligomer formation, and minimize byproducts. This paper presents a comprehensive review of the various advancements in the science and application of organic acids for the pretreatment of lignocellulose. Furthermore, the significant challenges of organic acid recovery after pretreatment are highlighted, and different recovery methods are discussed. In conclusion, the future challenges related to utilizing organic acids for lignocellulose pretreatment are summarized, with a strong emphasis on adopting a sustainable approach to converting valuable bioresources into renewable products.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Investigation of the effects of ternary deep eutectic solvent composition on pretreatment of sorghum stover

Biomass‐derived deep eutectic solvents (DESs) have been introduced as promising pretreatment and fractionation solvents because of their mild processing conditions, easy synthesis, and green solvent components from biomass. In recent DES studies, solvent‐based third constituents like water, ethanol, and others improve the processibility of typical binary DESs. However, the impacts of these components are not well understood. Here, two solvent‐based constituents, including water and ethylene glycol, were applied to 3,4‐dihydroxybenzoic acid (DHBA)‐based DES system for improving the conversion efficiency of cellulose‐rich fraction and the properties of lignin fraction. Chemical composition, enzymatic digestibility, degree of polymerization of cellulose and physicochemical properties of lignin were used to evaluate the impact of each third constituent on biomass processing. Ternary ChCl‐DHBA DESs exhibited better performances in delignification, fermentable sugar production, and preservation of β‐O‐4 ether linkage in lignin compared with binary ChCl‐DHBA DES.

09 BIOMASS FUELS↗