Search NASA⌕ Search

SEARCH · Search NASA

Results for “biomass program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Enabling Catalytic Strategies for Biomass Conversion

This research program employed a mix of fundamental investigations of catalytic reactivity with targeted approaches for the catalytic synthesis of monomers and renewable polymers. We investigated the mechanisms of selective aerobic oxidation of polyols and carbohydrates with Pd catalysts with a special focus on the role of hydrogen peroxide and peroxy intermediates in an effort to increase catalyst lifetime. We also extended our studies on the selective oxidation of sugars to ketoses and the oxidative lactonization of 1,5-diols to generate new families of lactone monomers.

36 MATERIALS SCIENCE↗

Superheater Corrosion In Biomass Boilers: Today's Science and Technology

This report broadens a previous review of published literature on corrosion of recovery boiler superheater tube materials to consider the performance of candidate materials at temperatures near the deposit melting temperature in advanced boilers firing coal, wood-based fuels, and waste materials as well as in gas turbine environments. Discussions of corrosion mechanisms focus on the reactions in fly ash deposits and combustion gases that can give corrosive materials access to the surface of a superheater tube. Setting the steam temperature of a biomass boiler is a compromise between wasting fuel energy, risking pluggage that will shut the unit down, and creating conditions that will cause rapid corrosion on the superheater tubes and replacement expenses. The most important corrosive species in biomass superheater corrosion are chlorine compounds and the most corrosion resistant alloys are typically FeCrNi alloys containing 20-28% Cr. Although most of these materials contain many other additional additions, there is no coherent theory of the alloying required to resist the combination of high temperature salt deposits and flue gases that are found in biomass boiler superheaters that may cause degradation of superheater tubes. After depletion of chromium by chromate formation or chromic acid volatilization exceeds a critical amount, the protective scale gives way to a thick layer of Fe 2 O 3 over an unprotective (FeCrNi) 3 O 4 spinel. This oxide is not protective and can be penetrated by chlorine species that cause further acceleration of the corrosion rate by a mechanism called active oxidation. Active oxidation, cited as the cause of most biomass superheater corrosion under chloride ash deposits, does not occur in the absence of these alkali salts when the chloride is present as HCl gas. Although a deposit is more corrosive at temperatures where it is molten than at temperatures where it is frozen, increasing superheater tube temperatures through the measured first melting point of fly ash deposits does not necessarily produce a step increase in corrosion rate. Corrosion rate typically accelerates at temperatures below the first melting temperature and mixed deposits may have a broad melting temperature range. Although the environment at a superheater tube surface is initially that of the ash deposits, this chemistry typically changes as the deposits mature. The corrosion rate is controlled by the environment and temperature at the tube surface, which can only be measured indirectly. Some results are counter-intuitive. Two boiler manufacturers and a consortium have developed models to predict fouling and corrosion in biomass boilers in order to specify tube materials for particular operating conditions. It would be very useful to compare the predictions of these models regarding corrosion rates and recommended alloys in the boiler environments where field tests will be performed in the current program. Manufacturers of biomass boilers have concluded that it is more cost-effective to restrict steam temperatures, to co-fire biofuels with high sulfur fuels and/or to use fuel additives rather than try to increase fuel efficiency by operating with superheater tube temperatures above melting temperature of fly ash deposits. Similar strategies have been developed for coal fired and waste-fired boilers. Additives are primarily used to replace alkali metal chloride deposits with higher melting temperature and less corrosive alkali metal sulfate or alkali aluminum silicate deposits. Design modifications that have been shown to control superheater corrosion include adding a radiant pass (empty chamber) between the furnace and the superheater, installing cool tubes immediately upstream of the superheater to trap high chloride deposits, designing superheater banks for quick replacement, using an external superheater that burns a less corrosive biomass fuel, moving circulating fluidized bed (CFB) superheaters from the convective pass into the hot recirculated fluidizing medium and adding an insulating layer to superheater tubes to raise their surface temperature above the dew point temperature of alkali chlorides. These design changes offer advantages but introduce other challenges. For example, operating with superheater temperatures above the dew point of alkali chlorides could require the use of creep-resistant tube alloys and doesn't eliminate chloride corrosion. Improved test methods that can be applied within this project include automated dimensional metrology to make a statistical analysis of depth of penetration and corrosion product thickness, and simultaneous thermal analysis measurements to quantify the melting of complex ashes and avoid the unreliability of the standard ash fusion test. Other important developments in testing include the installation of individually-temperature-controlled superheater loops for corrosion testing in operating boilers and temperature gradient testing.

09 BIOMASS FUELS↗

Considerations for improving the biosphere assessment methodology and the associated conceptual and mathematical models for application to LLW/ILW radioactive wastes in Spain - 15194

We give consideration to future needs in assessment studies relating to the disposal of very low level radioactive waste (VLLW), low level radioactive waste (LLW) and intermediate level radioactive waste (ILW) in Spain. As these wastes are primarily disposed at El Cabril, particular attention is given to the characteristics of that site. The focus is on post-closure performance assessment studies and specifically on the biosphere aspect of those studies. In particular, it gives consideration to the assessment methodology that should be used, taking into account the recommendations made in the international BIOMASS and BIOCLIM programs, as well as more recent developments. It then goes on to consider the conceptual models of the biosphere that should be developed and comments on how these should be transformed into mathematical models. The issues arising in conceptual and mathematical model development are illustrated by reference to El Cabril, but several of these issues would also be applicable to other engineered facilities excavated from the surface in a variety of geographical and geological contexts. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Biomass to Liquid Fuels and Electrical Power

This research program provided data on immediate applicability of forest biomass production and logistics models. Also, the research further developed and optimized fractionation techniques that can be used to separate biomass feedstocks into their basic chemical constituents. Finally, additional research established systematic techniques to determine economically feasible technologies for production of biomass-derived synthesis gases that will be used for clean, renewable power generation and for production of liquid transportation fuels. Moreover, this research program continued our efforts to educate the next generation of engineers and scientists needed to implement these technologies.

09 BIOMASS FUELS↗

U.S. Department of Energy Basic Research Opportunities in Genomic Science to Advance the Production of Biofuels and Bioproducts from Plant Biomass: White Paper

The Genomic Science program of the Office of Biological and Environmental Research (BER) within the U.S. Department of Energy (DOE) Office of Science focuses on understanding microbes, microbial communities, and plants as integrated systems of relevance to DOE’s energy and environmental missions. One aspect of the program seeks to develop the fundamental science, research technologies, and knowledgebase necessary to enable the cost-effective, sustainable production of biofuels and bioproducts from plant biomass. This initial potential of biomass was outlined in the Billion-Ton Study (U.S. DOE 2005; update, U.S. DOE 2011a). Achieving multiple societal benefits underlies DOE’s research efforts to support a viable and sustainable domestic lignocellulosic advanced biofuels and bioproducts industry. These benefits include ensuring future energy security, lowering greenhouse gas production to mitigate climate impacts, diversifying the range of available biobased products, producing less toxic chemicals and byproducts, creating jobs in rural areas, and improving the U.S. trade balance. An earlier DOE workshop sought ways to realize these benefits by accelerating the emergence of a robust, new cellulosic ethanol industry. The resulting report, Breaking the Biological Barriers to Cellulosic Ethanol (U.S. DOE 2006), outlined a path toward this future, emphasizing integrated research opportunities, from feedstock development to conversion technologies.

09 BIOMASS FUELS↗

An Integrated Approach to Improving Plant Biomass Production

Developing a sustainable biofuel program that minimizes negative impacts on the environment and captures the maximum usable energy per acre is a major challenge in the 21 st century. This study used rice as a model grass to identify novel biomass genes and to determine natural variation in cell-wall composition given the wide array of rice genomic tools and the ease of genetic manipulation relative to emerging grass bioenergy crops. In rice, we established an efficient pipeline to identify loci for biomass production and composition. From that work, we identified biomass QTL and candidate genes for improving biomass quality and quantity in plants. Then, we developed resources to enhance the translation of information of biomass production from rice to switchgrass, and used these resources to test candidate genes for function in improving biomass production in switchgrass. We created a web based genomics platform to display and facilitate analysis of rice and switchgrass comparative functional and genomic data. Finally, we describe a novel field-level high throughput phenotyping system that allows for efficient, rapid capture of phenotype data, enabling the mapping of biomass QTL in large plant populations during growth and development. Overall, our project contributed (1) valuable genetic and genomic resources and tools in rice and switchgrass to the biomass community, (2) identified key biomass traits that are amenable for improvement by breeding or biotechnology, (3) provided validation that information from model systems could be applied to improvement of bioenergy crops, (4) developed a novel high throughput phenotyping system for field-level discovery of biomass QTL, and (5) contributed to the interdisciplinary training of four post doctoral fellows and five graduate students.

09 BIOMASS FUELS↗

Varying plant density and harvest time to optimize cowpea leaf yield and nutrient content

Plant density and harvest time were manipulated to optimize vegetative (foliar) productivity of cowpea [Vigna unguiculata (L.) Walp.] canopies for future dietary use in controlled ecological life-support systems as vegetables or salad greens. Productivity was measured as total shoot and edible dry weights (DW), edible yield rate [(EYR) grams DW per square meter per day], shoot harvest index [(SHI) grams DW per edible gram DW total shoot], and yield-efficiency rate [(YER) grams DW edible per square meter per day per grams DW nonedible]. Cowpeas were grown in a greenhouse for leaf-only harvest at 14, 28, 42, 56, 84, or 99 plants/m2 and were harvested 20, 30, 40, or 50 days after planting (DAP). Shoot and edible dry weights increased as plant density and time to harvest increased. A maximum of 1189 g shoot DW/m2 and 594 g edible DW/m2 were achieved at an estimated plant density of 85 plants/m2 and harvest 50 DAP. EYR also increased as plant density and time to harvest increased. An EYR of 11 g m-2 day-1 was predicted to occur at 86 plants/m2 and harvest 50 DAP. SHI and YER were not affected by plant density. However, the highest values of SHI (64%) and YER (1.3 g m-2 day-1 g-1) were attained when cowpeas were harvested 20 DAP. The average fat and ash contents [dry-weight basis (dwb)] of harvested leaves remained constant regardless of harvest time. Average protein content increased from 25% DW at 30 DAP to 45% DW at 50 DAP. Carbohydrate content declined from 50% DW at 30 DAP to 45% DW at 50 DAP. Total dietary fiber content (dwb) of the leaves increased from 19% to 26% as time to harvest increased from 20 to 50 days.

NASA Discipline Life Support Systems↗

The variations of CO and O3 concentrations in a region subject to biomass burning

Carbon monoxide (CO) and ozone (O3) concentrations have been observed in the Brazilian Amazon region, at a site strongly affected by biomass burning (Cuiaba, 16 deg S, 58 deg W). Time variations are described for the first long-term program of studying the effect of biomass burning on O3 and CO over a complete seasonal cycle, including the seasonal maxima of 1987 and 1988. In order to obtain elements for comparison, an identical observational program was maintained at a site totally outside of the direct influence of biomass burning (Natal, 6 deg S, 35 deg W). The biomass burning contribution to the Cuiaba concentrations of CO and O3 is very large. Diurnal maxima concentrations exceeded 90 ppbv O3 in 1987 and 120 ppbv O3 in 1988, in September. For the wet season, the monthly average ozone concentration in March-April is about 10 ppbv. During the month of maxima, September, the O3 concentration average was 41 ppbv for 1987 and 71 ppbv for 1988. The CO concentrations are about 90 ppbv in the wet season. In September, 460 ppbv and 660 ppbv of CO were observed for 1987 and 1988, respectively. At Natal the seasonal variation is of the order of a factor of 2. During the wet season, the concentrations of CO and O3 at both stations are about the same.

Kirchhoff, V. W. J. H.↗

Long-term remote monitoring of salt marsh biomass

Methods developed for monitoring salt-marsh biomass remotedly are considered in the framework of NASA's Biospheric Research Program. Satellite-derived estimates of the aboveground biomass is considered, and it is noted that a long-term program for long-term remote monitoring is only practical if the relationship between biomass and spectral data remains essentially constant from year to year. Emphasis is placed on ground-based sampling, satellite measurements of mean marsh live aboveground biomass, the spatial distribution of biomass within the marsh, and changes in marsh hydrography as seen from a satellite. Linking aboveground and belowground biomass is discussed, as well as the problem with obtaining cloud-free images and measuring dead biomass.

Gross, M. F.↗

Development of Applied Membrane Technology for Processing Ethanol from Biomass

The technical objectives of this program were to demonstrate, with Compact Membrane Systems, Inc. (CMS) membrane technology, a water-ethanol system that would have significantly improved water transmission rate and would be economically attractive for a low cost azeotrope-breaking process. The overall objective was to indicate that a CMS membrane in line with existing distillation equipment can dramatically reduce the overall cost of dewatering ethanol for fuel-grade ethanol (FGE). The objectives of this program fell into three areas. The first objective was to demonstrate the feasibility that the CMS membranes have a unique capability for rapid transport of water or water vapor and significant water vapor-ethanol separation. The second objective was that the purity of ethanol and the inherent process is consistent with the needs and uses in the fuel grade ethanol industry. Thirdly, that this can be done in a manner that is significantly superior to existing processes.

09 BIOMASS FUELS↗

Optimization of harvest and logistics for multiple lignocellulosic biomass feedstocks in the northeastern United States

A mixed-integer linear programming model was developed to optimize the multiple biomass feedstock supply chains, including feedstock establishment, harvest, storage, transportation, and preprocessing. The model was applied for analyses of multiple biomass feedstocks at county level for 13 states in the northeastern United States. In the base case with a demand of 180,000 dry Mg/year of biomass, the delivered costs ranged from $\$67.90$ to $\$86.97$ per dry Mg with an average of $\$79.58$ /dry Mg. The biomass delivered costs by county were from $\$67.90$ to 150.81 per dry Mg across the northeastern U.S. Considered the entire study area, the delivered cost averaged $\$85.30$ /dry Mg for forest residues, $\$84.47$ /dry Mg for hybrid willow, $\$99.68$ for switchgrass and $\$97.87$ per dry Mg for Miscanthus. Seventy seven out of 387 counties could be able to deliver biomass at $84 per dry Mg or less a target set by US DOE by 2022. A sensitivity analysis was also conducted to evaluate the effects of feedstock availability, feedstock price, moisture content, procurement radius, and facility demand on the delivered cost. Lastly, our results showed that procurement radius, facility capacity, and forest residue availability were the most sensitive factors affecting the biomass delivered costs.

09 BIOMASS FUELS↗

Plastic from CO2 and Inedible Biomass (CRADA Final Report)

As part of the Cyclotron Road program, ReSource Chemical Corp. sought to investigate the conversion of inedible biomass and CO₂ to FDCA. FDCA is a performance monomer widely viewed as a green replacement for the petroleum-derived monomer PTA, which is produced at approximately 60 Mt per year with over 100 Mt of annual GHG emissions. The major polyester made from PTA, called PET, is a >$\$$100B industry with applications in bottling, food packaging, and fibers. The FDCA analogue of PET, called PEF, had superior gas barrier, mechanical, and thermal properties that enable increased shelf life of perishable goods while using less plastic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and performance of the KSC Biomass Production Chamber

NASA's Controlled Ecological Life Support System program has instituted the Kennedy Space Center 'breadboard' project of which the Biomass Production Chamber (BPC) presently discussed is a part. The BPC is based on a modified hypobaric test vessel; its design parameters and operational parameters have been chosen in order to meet a wide range of plant-growing objectives aboard future spacecraft on long-duration missions. A control and data acquisition subsystem is used to maintain a common link between the heating, ventilation, and air conditioning system, the illumination system, the gas-circulation system, and the nutrient delivery and monitoring subsystems.

Prince, Ralph P.↗

Decentralized and mobile biomass torrefaction to upgrade the biomass supply chain

As part of the Cyclotron Road program, Takachar seeks to investigate the scaling laws and behaviors of a small-scale biomass torrefaction reactor design and its technoeconomic feasibility in various potential applications. Traditionally, biomass is logistically expensive and complicated to utilize in various energy and chemical industries, because it is often loose, wet, bulky, and present in small pockets in dispersed regions. Biomass torrefaction is an approach whereby raw biomass is subject to moderate heat, releasing low-energy molecules. The resultant torrefied biomass becomes energy and volume dense, which reduces the relative transportation cost, and in many cases can even support a local value chain that would otherwise not be possible. However, conventional biomass torrefaction systems are often large-scale, centralized in design, rending them difficult to deploy in many biomass applications in rural/decentralized regions. By building upon prior research at Massachusetts Institute of Technology (MIT), the concept of small-scale, low-cost, and portable biomass torrefaction units was explored further. This investigation has led to the advancement and scale-up of the MIT technology which can be deployed to a much wider spectrum of the biomass market than the conventional technologies.

09 BIOMASS FUELS↗