Search NASA⌕ Search

SEARCH · Search NASA

Results for “boundary-layer stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Flow over plates with suction through porous strips

This paper addresses the steady, incompressible, two-dimensional flow past a flat plate with suction through porous strips. Closed-form solutions for each flow quantity are developed in the context of linearized triple-deck theory using Fourier transforms. To demonstrate the validity of these closed-form solutions, we compare the wall shear stress and pressure coefficients and the streamwise velocity profiles from the linearized theory with those obtained by the numerical integration of both interacting and nonsimilar boundary-layer equations. The agreement between the linearized triple-deck and interacting boundary-layer equations is good; however, the nonsimilar boundary layers, which fail to account for upstream influence, are shown to be in poor agreement with both interacting boundary layers and the linearized triple deck. The linearized closed-form solutions will therefore be very useful in future stability calculations.

Nayfeh, A. H.↗
NASA NTRS1982

Stability of Goertler vortices in boundary layers

A formal analysis of Goertler-type instability is presented. The boundary-layer and disturbance equations are formulated in a general, orthogonal, curvilinear system of coordinates constructed from the inviscid flow over a curved surface. Effects of curvature on the boundary-layer flow are analyzed. The basic approximation for the disturbance equations is presented and solved numerically. Previous analyses are discussed and compared with our analysis. It is shown that the general system of coordinates developed in this analysis and the correct order-of-magnitude analysis of the disturbance velocities with two velocity scales leads to a rational foundation for future work in Goertler vortices.

Floryan, J. M.↗
NASA NTRS1982

Three-dimensional stability of vortex arrays

The stability to three-dimensional disturbances of three classical steady vortex configurations in an incompressible inviscid fluid is studied in the limit of small vortex cross-sectional area and long axial disturbance wavelength. The configurations examined are the single infinite vortex row, the Karman vortex street of staggered vortices and the symmetric vortex street. It is shown that the single row is most unstable to a two-dimensional disturbance, while the Karman vortex street is most unstable to a three-dimensional disturbance over a significant range of street spacing ratios. The symmetric vortex street is found to be most unstable to three-dimensional or two-dimensional symmetric disturbances depending on the spacing ratio of the street. Short remarks are made concerning the relevance of the calculations to the observed instabilities in free shear layer, wake and boundary-layer type flows.

Robinson, A. C.↗
NASA NTRS1984

Correlations of supersonic boundary-layer transition on cones including effects of large axial variations in wind-tunnel noise

Transition data on sharp tip cones in two pilot low disturbance wind tunnels at Mach numbers of 3.5 and 5 were correlated in terms of noise parameters with data from several conventional wind tunnels and with data from supersonic flight tests on a transition cone. The noise parameters were developed to account for the large axial variations of the free stream noise and the very high frequency noise spectra that occurred in the low disturbance tunnels for some test conditions. The noise could be varied in these tunnels from high levels, approaching those in conventional tunnels, to extremely low levels. The correlations indicated that transition in the low disturbance tunnels was dominated by the local stream noise that was incident on the cone boundary layer unstream of the neutral stability point. The correlation results also suggested that high frequency components of the low disturbance tunnel noise spectra had significant effects on transition when the noise was incident on the boundary layer both upstream and downstream of the neutral stability point.

Chen, F. J.↗
NASA NTRS1984

Effects of streamwise variations in noise levels and spectra on supersonic boundary-layer transition

Transition data for sharp cones in two quiet wind tunnels at Mach numbers 3.5 and 5.0 have been correlated in terms of noise parameters with data from several conventional wind tunnels and from the flight data for the AEDC transition cone. The noise parameters were developed to account for the large axial variations of the rms stream noise and the high frequency noise spectra that occurred in the quiet tunnels for some test conditions. The correlation results indicated transition in the quiet tunnels was dominated by the local stream noise that was incident on the cone boundary layer upstream of the neutral stability point. The correlation results also suggested that the energy in high frequency components of the quiet tunnel noise spectra had significant adverse effects on transition when the noise was incident on the boundary layer both upstream and downstream of the neutral stability point.

Chen, F.-J.↗
NASA NTRS1983

Growth of Goertler vortices in compressible boundary layers along curved surfaces

An investigation of the growth of the three-dimensional, counter-rotating, longitudinal type vortices is considered in two-dimensional laminar compressible boundary-layer flow. The basic approximation of the disturbance equations that includes the terms due to boundary layer growth is considered and solved numerically. These terms are shown to have large local effects near the neutral stability region. The study shows that the instability of the boundary layer with respect to the three-dimensional vortices sets in at higher Goertler number as Mach number increases. Also the maximum amplitude ratio of the vortices is reduced by about 20 percent as Mach number increases from 0 to 5.

El-Hady, N. M.↗
NASA NTRS1987

Stability and transition of three-dimensional flows

The role of secondary instabilities in the transition to turbulence in three-dimensional boundary layers (especially in swept-wing flows) is characterized, reviewing the results of recent theoretical and experimental investigations. Consideration is given to cross-flow vortices, boundary-layer profile measurements, flow visualization, spanwise wavelength determinations, interactions, problems involving rotating disks and cones, and leading-edge contamination. All of the flows investigated are shown to exhibit streamwise vorticity and to depend strongly on initial conditions.

Reed, H. L.↗
NASA NTRS1987

Stability of time dependent and spatially varying flows; Proceedings of the Symposium, Hampton, VA, Aug. 19-23, 1985

Papers are presented on the application of stability theory to laminar flow control, secondary instabilities in boundary layers, a Floquet analysis of secondary instability in shear flows, and the generation of Tollmien-Schlichting waves by long wavelength free stream disturbances. Also considered are numerical experiments on boundary-layer receptivity, short-scale inviscid instabilities in the flow past surface-mounted obstacles, wave phenomena in a high Reynolds number compressible boundary layer, and instability of time-periodic flows. Other topics include high frequency Rayleigh instability of Stokes layers, stability and resonance in grooved-channel flows, finite length Taylor Couette flow, and vortical structures in the breakdown stage of transition.

Dwoyer, Douglas L.↗
NASA NTRS1988

Comparison of boundary-layer transition on a cone and flat plate at Mach 3.5

NASA-Langley's Pilot Low-Disturbance Tunnel has been used to obtain boundary layer transition data on a cone and flat plate at Mach 3.5. The transition Reynolds numbers measured under these low noise conditions are higher than those in conventional noisy tunnels by a factor of 3 in the case of the cone and of seven in that of the flat plate. Transition predictions based on compressible linear stability theory and the e exp N method, for N=10, are in excellent agreement with the measured locations with transition onset for both the cone and flat plate under these low noise conditions.

Chen, F.-J.↗
NASA NTRS1987

Boundary-layer instability mechanisms on a swept-leading edge at Mach 3.5

Correlations have been made in NASA Langley's Mach 3.5 Pilot Quiet Tunnel for the transitions occurring from laminar to turbulent flow, in the cases of 45-deg and 60-deg swept cylinders. While freestream noise variations had no effect on boundary layer transition, the addition of boundary layer trips to the leading edges led to transition at lower Re numbers, depending on both trip height and wind tunnel noise level. Also presented are the results of compressible linear stability calculations for the boundary layer of an infinite swept cylinder; Tollmien-Schlichting waves are found to be amplified in the attachment line boundary layer.

Creel, T. R., Jr.↗
NASA NTRS1987

Application of sound and temperature to control boundary-layer transition

The growth and decay of a wave packet convecting in a boundary layer over a concave-convex surface and its active control by localized surface heating are studied numerically using direct computations of the Navier-Stokes equations. The resulting sound radiations are computed using linearized Euler equations with the pressure from the Navier-Stokes solution as a time-dependent boundary condition. It is shown that on the concave portion the amplitude of the wave packet increases and its bandwidth broadens while on the convex portion some of the components in the packet are stabilized. The pressure field decays exponentially away from the surface and then algebraically, exhibiting a decay characteristic of acoustic waves in two dimensions. The far-field acoustic behavior exhibits a super-directivity type of behavior with a beaming downstream. Active control by surface heating is shown to reduce the growth of the wave packet but have little effect on acoustic far field behavior for the cases considered. Active control by sound emanating from the surface of an airfoil in the vicinity of the leading edge is experimentally investigated. The purpose is to control the separated region at high angles of attack. The results show that injection of sound at shedding frequency of the flow is effective in an increase of lift and reduction of drag.

Maestrello, Lucio↗
NASA NTRS1987

Experimental and theoretical investigation of boundary-layer instability mechanisms on a swept leading edge at Mach 3.5

A brief outline of the experimental and theoretical investigation of boundary layer instability mechanisms on a swept leading edge at Mach 3.5 is presented. Transition is affected by wind tunnel noise only when roughness is present. Local bar-R sub * Reynolds number and k/eta sub * are useful correlation parameters for a wide range of free stream Mach numbers. Stability theory is in good agreement with the experimental cross flow vortex wavelength. These conclusions are briefly discussed.

Creel, Theodore R., Jr.↗
NASA NTRS1948

The Effect of Boundary-layer Control by Suction and of Several High-lift Devices on the Aerodynamic Characteristics in Yaw of a 47.5 Degree Sweptback

An investigation has been made in the Langley full-scale tunnel of a 47.5 degree sweptback wing-fuselage combination equipped for boundary-layer control by suction. The wing aspect ratio was 3.5, the taper ratio was 0.5 and the airfoil sections normal to the quarter-chord line were NACA 61(sub 1)-A112. Tests included the plain wing and the wing with various combinations of extensible leading-edge and split flaps. The investigation was made to determine the effect of boundary-layer control by suction on the aerodynamic characteristics in yaw and on the effectiveness of a split-flap-type aileron for a range of angle of attack and suction-flow coefficient at a Reynolds number of 4.2 x 10 (exp 6) corresponding to a Mach number of approximately 0.07.

BOUNDARY LAYER - COMPLETE WINGS↗
NASA NTRS1948

The Effect of Boundary-layer Control by Suction and Several High-lift Devices on the Longitudinal Aerodynamic Characteristics of a 47.5 Degree Sweptback Wing-fuselage Combination

An investigation has been made in the Langley full-scale tunnel of a 47.5 degree sweptback wing-fuselage combination equipped for boundary-layer control by suction. The wing aspect ratio was 3.5, the taper ratio was 0.5, and the airfoil sections normal to the quarter-chord line were NACA 64(sub 1)-A112. The wing configurations tested included the wing with various combinations of extensible leading-edge and split flaps. The effect of Reynolds number, suction-slot location and suction flow coefficient on the aerodynamic characteristics was determined for the model at zero yaw over a range of angle of attack.

WING-FUSELAGE COMBINATIONS - AIRPLANES↗
NASA NTRS1951

Comparison of Theoretical and Experimental Heat-Transfer Characteristics of Bodies of Revolution at Supersonic Speeds

An investigation of the three important factors that determine convective heat-transfer characteristics at supersonic speeds, location boundary-layer transition, recovery factor, and heat-transfer parameter has been performed at Mach numbers from 1.49 to 1.18. The bodies of revolution that were tested had, in most cases, laminar boundary layers, and the test results have been compared with available theory. Boundary-layer transition was found to be affected by heat transfer. Adding heat to a laminar boundary layer caused transition to move forward on the test body, while removing heat caused transition to move rearward. These experimental results and the implications of boundary-layer-stability theory are in qualitative agreement.

Scherrer, Richard↗
NASA NTRS1955

Analysis and calculation by integral methods of laminar compressible boundary-layer with heat transfer and with and without pressure gradient

A survey of integral methods in laminar-boundary-layer analysis is first given. A simple and sufficiently accurate method for practical purposes of calculating the properties (including stability) of the laminar compressible boundary layer in an axial pressure gradient with heat transfer at the wall is presented. For flow over a flat plate, the method is applicable for an arbitrarily prescribed distribution of temperature along the surface and for any given constant Prandtl number close to unity. For flow in a pressure gradient, the method is based on a Prandtl number of unity and a uniform wall temperature. A simple and accurate method of determining the separation point in a compressible flow with an adverse pressure gradient over a surface at a given uniform wall temperature is developed. The analysis is based on an extension of the Karman-Pohlhausen method to the momentum and the thermal energy equations in conjunction with fourth- and especially higher degree velocity and stagnation-enthalpy profiles.

Morduchow, Morris↗
NASA NTRS1957

Some Effects of Bluntness on Boundary-Layer Transition and Heat Transfer at Supersonic Speeds

Large downstream movements of transition observed when the leading edge of a hollow cylinder or a flat plate is slightly blunted are explained in terms of the reduction in Reynolds number at the outer edge of the boundary layer due to the detached shock wave. The magnitude of this reduction is computed for cones and wedges for Mach numbers to 20. Concurrent changes in outer-edge Mach number and temperature occur in the direction that would increase the stability of the laminar boundary layer. The hypothesis is made that transition Reynolds number is substantially unchanged when a sharp leading edge or tip is blunted. This hypothesis leads to the conclusion that the downstream movement of transition is inversely proportional to the ratio of surface Reynolds number with blunted tip or leading edge to surface Reynolds number with sharp tip or leading edge. The conclusion is in good agreement with the hollow-cylinder result at Mach 3.1.

Moeckel, W E↗