Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Strain relief and AlSb buffer layer morphology in GaSb heteroepitaxial films grown on Si as revealed by high-angle annular dark-field scanning transmission electron microscopy

The interfacial misfit (IMF) dislocation array of an epitaxial GaSb film on a Si substrate has been imaged with high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). The mismatch strain accommodation through dislocation formation has been investigated using geometric phase analysis (GPA) on HAADF-STEM images with atomic resolution to probe the defects' local strain distribution. These measurements indicate that the lattice parameter of the epitaxial film recovers its bulk value within three unit cells from the interface due to the relaxation through IMF dislocations. The atomic number contrast of the HAADF-STEM images and energy dispersive x-ray spectrometry illustrate the formation of islands of AlSb buffer layer along the interface. The role of the AlSb buffer layer in facilitating the GaSb film growth on Si is further elucidated by investigating the strain field of the islands with the GPA.

36 MATERIALS SCIENCE↗

Influence of a por-Si Buffer Layer on the Optical Properties of Epitaxial In{sub x}Ga{sub 1 –x}N/Si(111) Heterostructures with a Nanocolumnar Film Morphology

Integrated heterostructures exhibiting a nanocolumnar morphology of the In{sub x}Ga{sub 1 –x}N film are grown on a single-crystal silicon substrate (c-Si(111)) and a substrate with a nanoporous buffer sublayer (por-Si) by molecular-beam epitaxy with the plasma activation of nitrogen. Using a complex of spectroscopic methods of analysis, it is shown that the growth of In{sub x}Ga{sub 1 –x}N nanocolumns on the por-Si buffer layer offer a number of advantages over growth on the c-Si substrate. Raman and ultraviolet spectroscopy data support the inference about the growth of a nanocolumn structure and agree with the previously obtained X-ray diffraction (XRD) data indicative of the strained, unrelaxed state of the In{sub x}Ga{sub 1 –x}N layer. The growth of In{sub x}Ga{sub 1 –x}N nanocolumns on the por-Si layer positively influences the optical properties of the heterostructures. At the same half-width of the emission line in the photoluminescence spectrum, the emission intensity for the heterostructure sample grown on the por-Si buffer layer is ~25% higher than the emission intensity for the film grown on the c-Si substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Annealing induced structural changes in amorphous Co{sub 23}Fe{sub 60}B{sub 17} film on Mo buffer layer

Structural changes occurring in a thin amorphous Co{sub 23}Fe{sub 60}B{sub 17} film sandwiched between two Mo layers, as a function of thermal annealing has been studied. Thermal stability of the Co{sub 23}Fe{sub 60}B{sub 17} film is found to be significantly lower than the bulk ribbons. SIMS measurements show that during crystallization, boron which is expelled out of the crystallites, has a tendency to move towards the surface. No significant diffusion of boron in Mo buffer layer is observed. This result is in contrast with some earlier studies where it was proposed that the role of buffer layer of refractory metal is to absorb boron which is expelled out of the bcc FeCo phase during crystallization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effects of the porous buffer layer and doping with dysprosium on internal stresses in the GaInP:Dy/por-GaAs/GaAs(100) heterostructures

In structures with a porous buffer layer, residual internal stresses caused by a mismatch between the crystal-lattice parameters of the epitaxial GaInP alloy and the GaAs substrate are redistributed to the porous layer that acts as a buffer and is conducive to disappearance of internal stresses. Doping of the epitaxial layer with dysprosium exerts a similar effect on the internal stresses in the film-substrate structure.

36 MATERIALS SCIENCE↗

Buffer-layer-controlled nickeline vs zinc-blende/wurtzite-type MnTe growths on c -plane Al 2 O 3 substrates

In the recent past, MnTe has proven to be a crucial component of the intrinsic magnetic topological insulator (IMTI) family [MnTe] m [Bi2Te 3 ] n , which hosts a wide range of magneto-topological properties depending on the choice of m and n. However, bulk crystal growth allows only a few combinations of m and n for these IMTIs due to the strict limitations of the thermodynamic growth conditions. One way to overcome this challenge is to utilize atomic layer-by-layer molecular beam epitaxy (MBE) technique, which allows arbitrary sequences of [MnTe]m and [Bi 2 Te 3 ] n to be formed beyond the thermodynamic limit. For such MBE growth, finding optimal growth templates and conditions for the parent building block, MnTe, is a key requirement. Here, we report that two different hexagonal phases of MnTe - nickeline (NC) and zinc-blende/wurtzite (ZB-WZ) structures, with distinct in-plane lattice constants of 4.20 ± 0.04 Å and 4.39 ± 0.04 Å, respectively - can be selectively grown on c-plane Al 2 O 3 substrates using different buffer layers and growth temperatures. Moreover, we provide the first comparative studies of different MnTe phases using atomic-resolution scanning transmission electron microscopy and show that ZB and WZ-like stacking sequences can easily alternate between the two. Surprisingly, In 2 Se 3 buffer layer, despite its lattice constant (4.02 Å) being closer to that of the NC phase, fosters the ZB-WZ instead, whereas Bi 2 Te 3 , sharing the same lattice constant (4.39 Å) with the ZB-WZ phase, fosters the NC phase. Furthermore, these discoveries suggest that lattice matching is not always the most critical factor determining the preferred phase during epitaxial growth. Overall, this will deepen our understanding of epitaxial growth modes for chalcogenide materials and accelerate progress toward new IMTI phases as well as other magneto-topological applications.

36 MATERIALS SCIENCE↗

Solar cell comprising a metal-oxide buffer layer and method of fabrication

A perovskite-based solar cell comprising a transparent electrode disposed on a buffer layer that protects the perovskite from damage during the deposition of the electrode is disclosed. The buffer material is deposited using either low-temperature atomic-layer deposition, chemical-vapor deposition, or pulsed chemical-vapor deposition. In some embodiments, the perovskite material is operative as an absorption layer in a multi-cell solar-cell structure. In some embodiments, the perovskite material is operative as an absorption layer in a single junction solar cell structure.

Bush, Kevin Alexander↗

The Microscopic Mechanism of Lithiation and Delithiation in the Ag/C Buffer Layer for Anode‐Free Solid‐State Batteries

Abstract Lithium metal solid‐state batteries (LMSSBs) have demonstrated their high energy density and cycling performance at high current densities in an anode‐free architecture, featuring a thin Ag/C composite buffer layer (BL) between the current collector (CC) and the solid electrolyte (SE). This study explains the microscopic mechanism of the Ag/C BL by using first‐principles atomistic and continuum modeling. It is shown that Ag effectively acts as a homogeneous solid‐solution beyond AgLi 2.32 and maintains a positive potential even at AgLi 25 during lithiation. Key factors underlying the working of the Ag/C BL include lower interfacial resistance at the BL/CC interface than at the BL/SE interface, leading to predominant Li deposition on BL/CC, and substantial Ag–Li volume expansion during lithiation. This, combined with stronger BL/SE adhesion, causes BL/SE separation and Ag–Li extrusion toward the CC side. During delithiation, Ag re‐precipitates as nanoparticles uniformly on the CC, with its positive lithiation potential homogenizing Li currents in subsequent cycles. Other metals are less effective due to their relatively large overpotential, premature lithiation termination, and limited volume expansions hindering movement toward the CC. The study aids the BL design, focusing on metal choice and optimization material and microstructural properties, such as the Li‐ion conductivity and interfacial resistance.

25 ENERGY STORAGE↗

Undoped High-Resistance GaN Buffer Layer for AlGaN/GaN High-Electron-Mobility Transistors

It is shown that intentionally undoped high-resistance GaN buffer layers in AlGaN/GaN heterostructures with high electron mobility for transistors can be formed by ammonia molecular beam epitaxy. The GaN growth conditions have been optimized using calculations of the background impurity and point defect concentrations at different ratios of the gallium and ammonia fluxes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced hole injection in organic light-emitting devices by using Fe{sub 3}O{sub 4} as an anodic buffer layer

Hole injection improvement in organic light-emitting devices with Fe{sub 3}O{sub 4} as a buffer layer on indium tin oxide (ITO) has been demonstrated. The luminance and the current density are significantly enhanced by using the Fe{sub 3}O{sub 4}/ITO anode, as well as the turn-on voltage is reduced by 1.5 V compared to the devices without the buffer. Results of atom force microscopy, x ray, and UV photoelectron spectroscopy studies reveal that the enhanced hole injection is attributed to the modification of the ITO surface and the reduced hole-injection barrier by the insertion of the Fe{sub 3}O{sub 4} thin film between the ITO and hole-transporting layer.

36 MATERIALS SCIENCE↗

Nanostructured silicon substrates of nanopore morphology for buffer-layer free nanoheteroepitaxial growth of InP films

To reduce the cost of III–V solar cells, a buffer-layer free method of depositing high-quality III–V thin films onto low-cost silicon nanostructured substrates is proposed that is enabled by stress relaxation due to the nanopore morphology of the silicon substrate. As a proof-of-concept test of the proposed method, the nanoheteroepitaxial deposition of high quality InP thin film is examined. By comparing the deposition of InP (under conditions optimized for InP deposition onto InP substrates) onto nanostructured Si(100) substrates with nanopore and nanopillar morphologies, the morphology of nanopores is found to be preferred for the nanoheteroepitaxial deposition of InP films.

36 MATERIALS SCIENCE↗

Enhancing the electron mobility in Si-doped (010) β-Ga 2 O 3 films with low-temperature buffer layers

We demonstrate a new substrate cleaning and buffer growth scheme in β-Ga 2 O 3 epitaxial thin films using metal–organic vapor phase epitaxy (MOVPE). For the channel structure, a low-temperature (LT, 600 °C) un-doped Ga 2 O 3 buffer was grown, followed by a transition layer to a high-temperature (HT, 810 °C) Si-doped Ga 2 O 3 channel layers without growth interruption. The (010) Ga 2 O 3 Fe-doped substrate cleaning uses solvent cleaning, followed by additional hydrofluoric acid (49% in water) treatment for 30 min before the epilayer growth. This step is shown to compensate the parasitic Si channel at the epilayer–substrate interface that originates from the substrate polishing process or contamination from the ambient. From secondary ion mass spectroscopy (SIMS) analysis, the Si peak atomic density at the substrate interface is found to be several times lower than the Fe atomic density in the substrate—indicating full compensation. The elimination of the parasitic electron channel at the epi–substrate interface was also verified by electrical (capacitance–voltage profiling) measurements. In the LT-grown (600 °C) buffer layers, it is seen that the Fe forward decay tail from the substrate is very sharp, with a decay rate of ∼9 nm/dec. X-ray off-axis rocking curve ω-scans show very narrow full width at half maximum (FWHM) values, similar to the as-received substrates. These channels show record high electron mobility in the range of 196–85 cm 2 /V⋅s in unintentionally doped and Si-doped films in the doping range of 2 × 10 16 –1 × 10 20 cm −3 . Si delta-doped channels were also grown utilizing this substrate cleaning and the hybrid LT buffers. Record high electron Hall mobility of 110 cm 2 /V⋅s was measured for sheet charge density of 9.2 × 10 12 cm −2 . This substrate cleaning, combined with the LT buffer scheme, shows the potential of designing Si-doped β-Ga 2 O 3 channels with exceptional transport properties for high-performance Ga 2 O 3 -based electron devices.

Bhattacharyya, Arkka↗

Probing temperature gradients within the GaN buffer layer of AlGaN/GaN high electron mobility transistors with Raman thermography

We demonstrate the ability of confocal Raman thermography using a spatial filter and azimuthal polarization to probe vertical temperature gradients within the GaN buffer layer of operating AlGaN/GaN high electron mobility transistors. Temperature gradients in the GaN layer are measured by using offset focal planes to minimize the contribution from different regions of the GaN buffer. The measured temperature gradient is in good agreement with a thermal simulation treating the GaN thermal conductivity as homogeneous throughout the layer and including a low thermal conductivity nucleation layer to model the heat flow between the buffer and substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ellipsometric Method for Measuring the CdTe Buffer-Layer Temperature in the Molecular-Beam Epitaxy of CdHgTe

An ellipsometric procedure developed for noncontact in situ measurement of the CdTe buffer-layer temperature is presented. The procedure is based on the temperature dependence of the energy position of CdTe critical points and is intended for determining the initial temperature of the growth surface before epitaxy of the cadmium–mercury–telluride compound. An express method for determining the position of critical points by the spectra of ellipsometric parameter Ψ is proposed. A series of calibrated experiments is performed. They result in determination of the temperature dependences of the position of critical points. Estimations and the experiment show that the temperature-measurement accuracy is ±3°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In As{sub 1–x}Sb{sub x} heteroepitaxial structures on compositionally graded GaInSb and AlGaInSb buffer layers

Unrelaxed InAs{sub 1–x}Sb{sub x} (x = 0.43 and 0.38) alloy layers are produced by molecular-beam epitaxy on compositionally graded GaInSb and AlGaInSb buffer layers. The high quality of the thin films produced is confirmed by the results of high-resolution X-ray diffraction analysis and micro-Raman studies. The twomode type of transformation of the phonon spectra of InAs{sub 1–x}Sb{sub x} alloys is established.

36 MATERIALS SCIENCE↗

ZnS/Zn(O,OH)S-based buffer layer deposition for solar cells

The invention provides CBD ZnS/Zn(O,OH)S and spray deposited ZnS/Zn(O,OH)S buffer layers prepared from a solution of zinc salt, thiourea and ammonium hydroxide dissolved in a non-aqueous/aqueous solvent mixture or in 100% non-aqueous solvent. Non-aqueous solvents useful in the invention include methanol, isopropanol and triethyl-amine. One-step deposition procedures are described for CIS, CIGS and other solar cell devices.

14 SOLAR ENERGY↗

Bifacial CdTe Solar Cells with Copper Chromium Oxide Back-Buffer Layer

Bifacial solar cells have the potential to maintain energy output higher than monofacial devices under unfavorable weather conditions. A transparent back-buffer layer which can passivate the interface and improve the minority carrier lifetime is critical in CdTe-based bifacial devices. Herein, solution-processed Cu x Cr y O z as a promising back-buffer for CdTe/CdS solar cells is demonstrated. The carrier lifetimes measured at the front and back of the device are 31.2 and 3.1 ns, respectively, which correspond to an increase of ≈38% and 138%, respectively, compared to the reference device. This dramatic improvement in lifetime results in a 100% increase in short-circuit current measured with backside illumination. The best bifacial device has efficiencies 7.6% and 12.5%, respectively, from back and front illumination, yielding a bifaciality factor of 0.60.

14 SOLAR ENERGY↗

Investigation of ZnO thin films deposited on ferromagnetic metallic buffer layer by molecular beam epitaxy toward realization of ZnO-based magnetic tunneling junctions

Deposition of ZnO thin films on a ferromagnetic metallic buffer layer (Co{sub 3}Pt) by molecular beam epitaxy technique was investigated for realization of ZnO-based magnetic tunneling junctions with good quality hexagonal ZnO films as tunnel barriers. For substrate temperature of 600 Degree-Sign C, ZnO films exhibited low oxygen defects and high electrical resistivity of 130 {Omega} cm. This value exceeded that of hexagonal ZnO films grown by sputtering technique, which are used as tunnel barriers in ZnO-MTJs. Also, the effect of oxygen flow during deposition on epitaxial growth conditions and Co{sub 3}Pt surface oxidation was discussed.

36 MATERIALS SCIENCE↗