Search NASA⌕ Search

SEARCH · Search NASA

Results for “burning velocity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Forced Flow Flame Spreading Test: Preliminary Findings From the USMP-3 Shuttle Mission

The Forced Flow Flame spreading Test (FFFT) is a study of flame spreading over solid fuels in very low-speed air flows. The FFFT experiment is part of research entitled Solid Inflammability Boundary at Low Speeds, (SIBAL) intended for operations on the Space Station. In the FFFT experiment, a series of 15 experiments conducted aboard the space shuttle during the United States Microgravity Payload (USMP-3) mission provided information about the structure and spreading characteristics of flames in low-speed, concurrent flows. The test samples included flat sheets of cellulose and cast cylinders of cellulose, burned in air at velocities of approximately 1 to 8 cm/sec. The test results have been successfully compared to theoretical predictions of the SIBAL program, a fundamentally based numerical simulation of concurrent flow flame spread. Additionally, some guidance for the design characteristics of the SIBAL flight experiment have been obtained including some verification of the theoretical predictions of flame size versus the required size of the SIBAL flow duct, and the effect of the presence of thermocouples in the vicinity of near-limit flames in microgravity.

Sacksteder, Kurt R.↗
NASA NTRS2004

An Assessment of the Role of Solid Rocket Motors in the Generation of Orbital Debris

Through an intensive collection and assimilation effort of Solid Rocket Motor (SRM) related data and resources, the author offers a resolution to the uncertainties surrounding SRM particulate generation, sufficiently so to enable a first-order incorporation of SRMs as a source term in space debris environment definition. The following five key conclusions are derived: 1) the emission of particles in the size regime of greatest concern from an orbital debris hazard perspective (D > 100 micron), and in significant quantities, occurs only during the Tail-off phase of SRM burn activity, 2) the velocity of these emissions is correspondingly small - between 0 and 100 m/s, 3) the total Tail-off emitted mass is between approximately 0.04 and 0.65% of the initial propellant mass, 4) the majority of Tail-off emissions occur during the 30 second period that begins as the chamber pressure declines below approximately 34.5 kPa (5 psia) and 5) the size distribution for the emitted particles ranges from 100 micron <D< 5cm.

Mulrooney, Mark↗
NASA NTRSDate not supplied

Robust Trajectory Design for Rendezvous in a Near Rectilinear Halo Orbit

Future NASA Artemis missions will require complex docking plans between the Orion capsule and Lunar Gateway that meet predetermined safety constraints while minimizing fuel usage and state uncertainty at rendezvous. In this paper, linear covariance analysis is applied to a first order relative form of Near-Rectilinear Halo Orbit dynamics to determine the nominal trajectories and state dispersions associated with various maneuver profiles in the Sun-referenced Local Vertical Local Horizontal reference frame of the lunar Gateway. These maneuver profiles are optimized using a particle swarm optimizer and direct search algorithm to find trajectories that satisfy approach corridor, free drift, velocity magnitude, under-burn, and maneuver transfer time safety constraints to 3-sigma certainty.

Linear Covariance Analysis↗
DOE OSTI2021

xRage simulations of magnetic velocity gauges used in gas gun shock initiation experiments

Shock initiation gas gun experiments of PBX 9012 have been performed by Burns and Chiquete [2020] using magnetic velocity gauges as the principal diagnostic. In private communications, the experimenters noted that compatibility issues required a different glue to bond the gauges to PBX 9012 then previously used for experiments with PBX 9501 and PBX 9502. The silicon glue used is more viscous and can result in glue layers up to 50 microns, which is about the gauge thickness. This raises the question on what affect the thicker glue layers have on the gauge response. In particular, the width of the lead shock can affect the accuracy of inferring shock locus points used for the shock pressure of Pop plot data points and for Hugoniot data to calibrate the reactants EOS.

36 MATERIALS SCIENCE↗
NASA NTRS1983

Aerodynamic features of turbulent flames

The paper provides an interpretation for a variety of turbulent flame phenomena relating them to the aerodynamic properties of the flow field. This includes the classical notion of the breakdown of laminar flames propagation in ducts, the characteristic features of turbulent flame-fronts recorded by schlieren photography, as well as flame instabilities leading to flashback occurring in a combustion chamber behind a bluff-body flame holder. The rudimentary nature of turbulent flame propagation is shown to be associated with (1) vortex motion of a large-scale turbulent eddy, combined with (2) self-advancement of the flame at the appropriate normal burning speed and (3) the concomitant action of distributed sources of specific volume. The results furnish an insight into the macroscopic properties of the mechanism of turbulent flame propagation, rationalizing in particular its capability to sustain high flow velocities at relatively low normal burning speeds.

Oppenheim, A. K.↗
NASA NTRS1992

The conductive propagation of nuclear flames. I - Degenerate C + O and O + Ne + Mg white dwarfs

The paper determines the physical properties - speed, width, and density structure - of conductive burning fronts in degenerate carbon-oxygen (C + O) and oxygen-neon-magnesium (O + Ne + Mg) compositions for a grid of initial densities and compositions. The dependence of the physical properties of the flame on the assumed values of nuclear reaction rates, the nuclear reaction network employed, the thermal conductivity, and the choice of coordinate system are investigated. The occurrence of accretion-induced collapse of a white dwarf is found to be critically dependent on the velocity of the nuclear conductive burning front and the growth rate of hydrodynamic instabilities. Treating the expanding area of the turbulent burning region as a fractal whose tile size is identical to the minimum unstable Rayleigh-Taylor wavelength, it is found, for all reasonable values of the fractal dimension, that for initial C + O or O + Ne + Mg densities above about 9 x 10 exp 9 g/cu cm the white dwarf should collapse to a neutron star.

Timmes, F. X.↗
NASA NTRS1993

OH-radical imaging and velocity field measurements in a gaseous hydrogen/oxygen rocket

Detailed measurements of the OH-radical and velocity fields for a shear coaxial unielement rocket chamber burning gaseous hydrogen and gaseous oxygen propellants are reported. The velocity measurements indicate that a highly unsteady flowfield results from the turbulent combustion of the coaxial jets. The core of the oxygen stream is observed to remain intact well downstream of the injector face while the maximum turbulent intensities in the shear layer region between the hydrogen and oxygen flows were measured to be about 25 percent. Both 1D and 2D laser-induced fluorescence studies of the OH-radical are reported and provide information on the evolving flame structure under rocketlike conditions. Both single and multiple laser pulse images indicate that the structure of the unsteady flowfield is directly reflected in the combustion zone flame structure. Preliminary results regarding analysis approaches and interpretation of the data are also presented.

Moser, M. D.↗
NASA NTRS1988

The scaling of the threshold conditions for solid propellant erosive burning

Rocket test firings were performed to measure the transition length threshold conditions while systematically varying various rocket motor parameters. These include the crossflow velocity, the chamber pressure, the propellant nonerosive burning rate, the propellant surface roughness, and the motor port diameter. The erosive burning trends with varying propellant burning rate, motor chamber pressure, and mass flow rate are consistent with published results.

Strand, L. D.↗
DOE OSTI2022

Yield degradation mechanisms for two-shock capsules evaluated through simulations

An investigation of twenty two-shock campaign indirectly driven capsules on the National Ignition Facility was conducted using the xRAGE computer code. The two-shock platform was developed to look at the sensitivity of fuel–ablator mix with shock timing, asymmetry, surface roughness, and convergence on roughly ignition size scale capsules. This platform used CH/CD (plastic/deuterated plastic) shell capsules that were about 685-μm outer radius and filled with D2 or hydrogen-tritium (HT) gas. The experimental radius and velocity vs time, neutron yield, burn averaged ion temperature (Tion), burn width, and self-emission image size were compared to one-dimensional (1D) and two-dimensional (2D) simulations. Our 2D simulations suggest that the mixing of glass from the fill tube was the dominant source of impurity in the gas region of the capsule during burn, along with fuel–ablator mix. The mass of glass mixed in is about 5–10 ng. Our 2D simulations capture most of the yield trends from different degradation mechanisms, and they match the observed burn width and Tion measurements. Our 2D models match all the available data to within 2.5 times the normalized experimental error for 19 of 20 capsules.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1979

Laser anemometer measurements at the exit of a T63 combustor

In the first practical application of laser anemometry to an actual gas turbine engine combustor, the mean velocity and turbulent intensity profiles were measured in a steady-flow combustion rig across an annulus simulating a turbine inlet; to establish a basis for comparison with similar measurements to be made in an operating engine and to confirm current turbine aerodynamics and heat transfer design assumptions. It was necessary to develop a new experimental technique for traversing the annulus due to differential thermal expansion of the cantilevered combustion rig and a new computer-graphics analysis technique for analyzing the velocity histograms due to the high background light intensity. The axial mean velocity and turbulent intensity were uniform across the annulus under all operating conditions and the flow had little or no swirl component. The isothermal mean velocity was doubled by the burning of fuel, however, the isothermal turbulent intensity was relatively unaffected.

Zimmerman, D. R.↗
NASA NTRS1984

Aerodynamic features of flames in premixed gases

A variety of experimentally established flame phenomena in premixed gases are interpreted by relating them to basic aerodynamic properties of the flow field. On this basis the essential mechanism of some well known characteristic features of flames stabilized in the wake of a bluff-body or propagating in ducts are revealed. Elementary components of the flame propagation process are shown to be: rotary motion, self-advancement, and expansion. Their consequences are analyzed under a most strict set of idealizations that permit the flow field to be treated as potential in character, while the flame is modelled as a Stefan-like interface capable of exerting a feed-back effect upon the flow field. The results provide an insight into the fundamental fluid-mechanical reasons for the experimentally observed distortions of the flame front, rationalizing in particular its ability to sustain relatively high flow velocities at amazingly low normal burning speeds.

Oppenheim, A. K.↗
NASA NTRS1990

Computed potential energy surfaces for chemical reactions

The objective was to obtain accurate potential energy surfaces (PES's) for a number of reactions which are important in the H/N/O combustion process. The interest in this is centered around the design of the SCRAM jet engine for the National Aerospace Plane (NASP), which was envisioned as an air-breathing hydrogen-burning vehicle capable of reaching velocities as large as Mach 25. Preliminary studies indicated that the supersonic flow in the combustor region of the scram jet engine required accurate reaction rate data for reactions in the H/N/O system, some of which was not readily available from experiment. The most important class of combustion reactions from the standpoint of the NASP project are radical recombinaton reactions, since these reactions result in most of the heat release in the combustion process. Theoretical characterizations of the potential energy surfaces for these reactions are presented and discussed.

Walch, Stephen P.↗
NASA NTRS1979

Particle size and velocity measurement in flames by laser anemometer

Simultaneous droplet size and velocity measurements by a particle counting Laser Doppler Anemometer (LDA) in kerosene fuel sprays under burning and non-burning conditions are presented. Particle sizes are derived from pulse height analysis of the mean LDA signals and velocities are simultaneously determined by measuring Doppler shift frequencies. The measurements show that droplet velocity is a function of droplet diameter for burning and non-burning conditions, and spatially averaged size distributions are derived from velocity data. A comparison of results obtained under burning and non-burning conditions show changes in size distribution due to preferential vaporization of small droplets, acceleration due to thermal expansion of gases, and corresponding changes in droplet momentum.

Chigier, N. A.↗
NASA NTRS1986

Evaluation of the importance of the relative velocity during evaporation of drops in sprays

The importance of relative velocity past individual drops composing a burning spray with an envelope flame is estimated by applying the Bellan and Cuffel (1983) spray evaporation model to an ambient flow going around the spray without penetrating it. The model assumes a spherical spray composed of monodisperse uniformly distributed droplets which all move at the same speed, and relative gas/spray velocities, and spray radii used were representative of boiler and furnace operations. Numerical calculations indicate that the spray is more prone to ambient flow penetration for leaner mixtures (particularly for n = 1/cu cm), lower initial temperatures of gas phase and droplet, and more dilute spray configurations.

Bellan, J.↗
NASA NTRS2000

Deterrent Concentration Measurement with FTIR and Subsequent Ballistic Performance in Medium Caliber Propellant

To meet ballistic requirements, medium and small caliber propellants use deterrent coatings to obtain burn rate progressivity. The required amount and distribution of deterrent varies between gun systems, propellant types, and often between lots. Micro Fourier Transform Infrared (FTIR) spectroscopy was used to measure deterrent gradients in RP36 propellants coated with methyl centralite (MC) at different deterrent levels and different processing conditions. The aromatic C-C bonds at 1496 cm(exp -1) wavenumber were used to monitor the deterrent profiles through the grain. Deterrent gradients measured with FTIR spectroscopy were then used to estimate burn rate gradients in the deterred grains. Burn rates were calculated from literature models and from closed bomb data of RP36 containing uniform deterrent concentration. Finally, the burn rate gradients were input into an IBHFG2 model of a 200 cc-closed bomb. The early flame spreading portion of the closed bomb ballistic cycle (0 to 0.2 P/Pmax) was roughly modeled by dividing the charge up into five propellant decks and igniting them at different times in the ballistic cycle. Pressure traces and vivacity curves from closed bomb shots were compared to predictions. In addition to the burn rate gradient, the closed bomb pressure trace was heavily dependent on ignition and flame spread. These two phenomena were not readily distinguishable from one another in deterred grains. The same RP-36 propellant was shot in a 25 mm M793TP round which was again modeled with IBHVG2. Peak pressure and muzzle velocity were accurately modeled when erosive burning effects were empirically factored into the model.

Furrow, Keith W.↗
NASA NTRS1973

Space tug geosynchronous mission simulation

Near-optimal three dimensional trajectories from a low earth park orbit inclined at 28.5 deg to a synchronous-equatorial mission orbit were developed for both the storable (thrust = 28,912 N (6,500 lbs), I sub sp = 339 sec) and cryogenic (thrust = 44,480 N (10,000 lbs), I sub sp = 470 sec) space tug using the iterative cost function minimization technique contained within the modularized vehicle simulation (MVS) program. The finite burn times, due to low thrust-to-weight ratios, and the associated gravity losses are accounted for in the trajectory simulation and optimization. The use of an ascent phasing orbit to achieve burnout in synchronous orbit at any longitude is investigated. The ascent phasing orbit is found to offer the additional advantage of significantly reducing the overall delta velocity by splitting the low altitude burn into two parts and thereby reducing gravity losses.

Lang, T. J.↗
NASA NTRS1993

Calculations of combustion response profiles and oscillations

The theory and procedures for determining the characteristics of pressure oscillations in rocket engines with prescribed burning rate oscillations are presented. Pressure and velocity oscillations calculated using this procedure are presented for the Space Shuttle Main Engine (SSME) to show the influence of baffles and absorbers on the burning rate oscillations required to achieve neutral stability. Results of calculations to determine local combustion responses using detailed physical models for injection, atomization, and vaporization with gas phase oscillations in baffled and unbaffled SSME combustors are presented. The contributions of the various physical phenomena occurring in a combustor to oscillations in combustion response were determined.

Priem, Richard J.↗
DOE OSTI2022

Spin-stabilized orbital rocket guidance

Technologies for guidance of a spin-stabilized orbital rocket are described herein. The spin-stabilized rocket includes a guidance controller. The guidance controller computes parameters of a burn of a second-stage engine of the rocket to reach a desired nominal orbit subsequent to burnout of the first stage of the rocket. The guidance controller computes the burn parameters of the second-stage engine based upon one or more desired orbit parameters and a current position and velocity of the rocket. The computation of the burn parameters is based upon a simulated point-mass model of the motion of the rocket. The guidance controller then controls the rocket to initiate a second-stage burn having the computed burn parameters.

Gilkey, Jeffrey C.↗