Search NASA⌕ Search

SEARCH · Search NASA

Results for “carbon black”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Investigation of the structure, filler interaction and degradation of disulfide elastomers made by Reversible Radical Recombination Polymerization (R3P)

In this paper we report the synthesis and analysis of cyclic polydisulfides, their redox depolymerization as well as their interaction with carbon black. Cyclic poly(3,6-dioxa-1,8-octanedithiol)s (pDODT) were synthesized by Reversible Radical Recombination Polymerization (R3P). R3P is a scalable “green” polymerization process using triethylamine (TEA), H 2 O 2 and air for the polymerization of dithiol monomers. pDODTs were synthesized in 5 and 20 g batches. The effect of peroxide concentration (3, 5, 10, 20, 30%) was investigated. It was found that the molecular weights increased exponentially with increasing peroxide concentrations. At 30% peroxide concentration pDODTs with M n up to 400,000 g/mol and polydispersity of 2 were obtained. 700 and 800 MHz NMR were used for investigating the chemical structure of the polymers. The absence of thiol end group signals in polymers made with > 10wt % H 2 O 2 and M n < 100,000 g/mol, including a sample of a fractionated polymer with starting Mn = 600,000 g/mol, verified cyclic structures. Dithiothreitol reduced the polymers to monomer and a small percentage of oligomers. Carbon black was shown to increase the moduli of high molecular weight pDODTs. Swelling tests in chloroform showed that polymers made with 20 and 30w% peroxide swelled 14 and 10 times of their starting weight without dissolving, indicating chemical interaction between the polymers and carbon black. In conclusion, further analysis of these interesting elastomers, available at the 20 g scale, is in progress.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

BSEC Air Quality: Stationary Black and Brown Carbon Properties and Mass Concentration

Data is 1-min absorption/attenuation of aerosol collected on filter and sampled at seven wavelengths (950, 880, 660, 590, 520, 470, and 370 nm) with a Magee AE-33 dual spot aethalometer. The wavelength value for black carbon, as recommended by the manufacturer, is the 880 nm channel. The derived mass concentrations, using the factory default mass absorption cross-sections, are reported for all seven wavelengths. The absorption at all seven wavelengths are reported by dividing the derived mass concentrations by the factory default mass absorption cross-sections. The estimated mass concentration contribution from biomass burning and fossil fuel black carbon, using factory default values, are reported. The estimated brown carbon mass concentration is derived by finding the difference between the recommended black carbon wavelength (880 nm) and the ultra violet wavelength (370 nm), assuming that brown carbon absorption is strongest at 370 nm and minimal at 880 nm. Finally, the estimated absorption Angstrom exponent for black and brown carbon is derived. For black carbon, the slope between each minute log(AbsXXX), where XXX is the wavelength used versus log(XXX) is used, and the wavelengths are 590, 660, 880, and 950 nm. For brown carbon, the slope between each minute log(AbsXXX), where XXX is the wavelength used versus log(XXX) is used, and the wavelengths are 370, 470, and 520 nm.

aerosol↗
DOE OSTI2021

Hollow Silica Particles: A Novel Strategy for Cost Reduction

Thermal insulation materials are highly sought after for applications such as building envelopes, refrigerators, cryogenic fuel storage chambers, and water supply piping. However, current insulation materials either do not provide sufficient insulation or are costly. A new class of insulation materials, hollow silica particles, has attracted tremendous attention due to its potential to provide a very high degree of thermal insulation. However, current synthesis strategies provide hollow silica particles at very low yields and at high cost, thus, making the particles unsuitable for real-world applications. In the present work, a synthesis process that produces hollow silica particles at very high yields and at a lower cost is presented. The effect of an infrared heat absorber, carbon black, on the thermal conductivity of hollow silica particles is also investigated and it is inferred that a carbon black–hollow silica particle mixture can be a better insulating material than hollow silica particles alone.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multimodal Nanoscale Tomographic Imaging for Battery Electrodes

Accurate representations of the 3D structure within a lithium-ion battery are key to understanding performance limitations. However, obtaining exact reconstructions of electrodes, where the active particles, the carbon black and polymeric binder domain, and the pore space are visualized is challenging. In this work, it is shown that multimodal imaging can be used to overcome this challenge. High-resolution ptychographic X-ray computed tomography are combined with lower resolution but higher contrast transmission X-ray tomographic microscopy to obtain 3D reconstructions of pristine and cycled graphite-silicon composite electrodes. This cross-correlation enables quantitative analysis of the surface of active particles, including the heterogeneity of carbon-black and binder domain and solid-electrolyte interphase coverage. Capturing the active particles as well as the carbon black-binder domain allows using these segmented structures for electrochemical simulations to highlight the influence of the particle embedding on local state of charge heterogeneities.

25 ENERGY STORAGE↗
DOE OSTI2024

TRACER-BC2-SP2 Field Campaign Report

The focus of this project was to assess black carbon and brown carbon aerosol in Houston, Texas during the U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) user facility Tracking Aerosol Convection Interactions Experiment (TRACER) through the co-located deployment of a single-particle soot photometer (SP2) with the University of Houston/Baylor aerosol optical instrumentation in the Texas (BC)2 network in and around Houston. The deployment of the SP2 enables us to expand the spatial assessment of black carbon (BC) in Houston during TRACER by permitting a more thorough characterization of BC, including sources, transport, and potential processing. BC is well known to undergo physical and chemical changes during local and long-range transport that will impact its optical properties. By deploying multiple SP2s in the Houston area, the impacts of local and long-range transport can be assessed. The TRACER-BC2-SP2 campaign will expand spatial and temporal characterization of BC in the Houston area during TRACER and link the TRACER-carbon analysis to ongoing black and brown carbon monitoring (Texas [BC]2 network) in Houston.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Recycling of Post-Consumer Waste Polystyrene Using Commercial Plastic Additives

Photothermal conversion can promote plastic depolymerization (chemical recycling to a monomer) through light-to-heat conversion. The highly localized temperature gradient near the photothermal agent surface allows selective heating with spatial control not observed with bulk pyrolysis. However, identifying and incorporating practical photothermal agents into plastics for end-of-life depolymerization have not been realized. Interestingly, plastics containing carbon black as a pigment present an ideal opportunity for photothermal conversion recycling. Herein, we use visible light to depolymerize polystyrene plastics into styrene monomers by using the dye in commercial black plastics. A model system is evaluated by synthesizing polystyrene–carbon black composites and depolymerizing under white LED light irradiation, producing styrene monomer in up to 60% yield. Excitingly, unmodified postconsumer black polystyrene samples are successfully depolymerized to a styrene monomer without adding catalysts or solvents. Using focused solar irradiation, yields up to 80% are observed in just 5 min. Furthermore, combining multiple types of polystyrene plastics with a small percentage of black polystyrene plastic enables full depolymerization of the mixture. This simple method leverages existing plastic additives to actualize a closed-loop economy of all-colored plastics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Continuous Light Absorption Photometer (CLAP) Instrument Handbook

Reliable measurements of aerosol light absorption are crucial for quantifying the radiative forcing of climate. As a consequence, light absorption measurements are recommended for all stations in the Global Atmosphere Watch network, which is coordinated by the World Meteorological Organization. Aerosol light absorption is often dominated by soot-like particles produced by the incomplete combustion of carbonaceous fuels, commonly termed "black carbon", and optical methods are the primary way that equivalent black carbon concentrations are derived. Two basic approaches are used for determining the aerosol light absorption coefficient: in situ methods where the absorption is measured while the particles are suspended in air, and filter-based methods where the particles are deposited on a filter for real-time optical analysis. In situ methods are inherently more accurate because the physical state of the particles can be changed by the act of filtration. Unfortunately, currently available instruments for in situ measurements are more expensive and difficult to operate than filter-based methods, making them better suited for use in intensive field campaigns or as laboratory reference instruments. Filter-based instruments, because of their lower cost and simpler operation, have been the preferred choice for long-term measurements of aerosol light absorption in monitoring networks.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

TRACER-CAT Laser only SP-AMS measurements

Composition of black carbon containing aerosol was measured using laser-only soot particle aerosol mass spectrometer. This was done as part of TRACER-CAT in July 2022 at the La Porte, TX field site. Dataset includes the time series of black carbon (HRBC), organic aerosol (HROrg), sulfate (HRSO4), nitrate (HRNO3), chloride (HRChl), ammonium (HRNH4).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A simple centrifuge cell method for ex situ quantification of electrical conductivity of slurry electrode materials

We present the design, experimental procedure, and experimental evaluation of a system for fast, simple, and ex situ characterization of electrical conductivity of slurry electrode materials. The system uses a custom-designed electrochemical cell compatible with centrifugation in a swing-bucket centrifuge. The cell features cylindrical graphite electrodes that are partially sheathed so as to expose only 2 mm of the electrode surface to the bottom region of the packed particulate pellet. Also presented is a conduction model that provides a shape factor for estimating effective conductivity. We tested aqueous solutions of carbon black (CB), activated carbon (AC), and mixtures thereof. These particles were dispersed in 0.0 and 0.5 M NaCl solutions. Measurements show that the effective conductivity initially increases linearly with pellet mass and then saturates at higher masses. Notably, CB exhibited a fivefold increase in conductivity than AC at equal pellet masses. CB/AC mixtures at a fixed pellet mass were tested with CB mass fractions of 0 to 100%. Interestingly, the mixture conductivity was found to be a non-monotonic function of CB mass fraction, with a maximum conductivity at about 60 % CB mass fraction. At this maximum, the mixture conductivity is approximately 30 % higher than pure CB. NaCl concentration in the slurry solution had no effects on conductivity. These results highlight the interactions between slurry electrode composition and compaction, offering insights for optimizing slurry electrodes. Furthermore, the system and results may also be applicable to evaluation of particulate materials (including slurries) used for Li-ion batteries, capacitive deionization, fuel cells, and flow electrodes.

Capacitive deionization↗
DOE OSTI2021

Undersizing of aged African biomass burning aerosol by an ultra-high-sensitivity aerosol spectrometer

The ultra-high-sensitivity aerosol spectrometer (UHSAS) differs from most other optical particle spectrometers by using a high-power infrared (IR) laser to detect small particles and reduce the sizing ambiguity due to the non-monotonicity of scattering with particle size. During the NASA ORACLES project (ObseRvations of Aerosols above CLouds and their intEractionS) over the southeast Atlantic Ocean, the UHSAS clearly undersized particles in the biomass burning plume extending from southern Africa. Since the horizontal and vertical extent of the plume was vast, the NASA P-3B research aircraft often flew through a fairly uniform biomass burning plume for periods exceeding 30 min, sufficient time to explore the details of the UHSAS response by selecting single particle sizes with a differential mobility analyzer (DMA) and passing them to the UHSAS. This was essentially an in-flight calibration of the UHSAS using the particles of interest. Two modes of responses appeared. Most particles were undersized by moderate amounts, ranging from not at all for 70 nm aerosols to 15 % for 280 nm particles. Mie scattering calculations show that composition-dependent refractive index of the particles cannot explain the pattern. Heating of brown carbon or tarballs in the beam causing evaporation and shrinking of the particles is the most plausible explanation, though mis-sizing due to non-sphericity cannot be ruled out. A small fraction (10 %–30 %) of the particles were undersized by 25 % to 35 %. Those were apparently the particles containing refractory black carbon. Laboratory calibrations confirm that black carbon is drastically undersized by the UHSAS, because particles heat to their vaporization point and shrink. A simple empirical correction equation was implemented that dramatically improves agreement with DMA distributions between 100 and 500 nm. It raised the median particle diameter by 18 nm, from 163 to 181 nm, during the August 2017 deployment and by smaller amounts during deployments with less intense pollution. Calculated scattering from UHSAS size distributions increased by about 130 %, dramatically improving agreement with scattering measured by nephelometers. The correction is only valid in polluted instances; clean marine boundary layer and free troposphere aerosols behaved more like the calibration spheres. We were unable to directly test the correction between 500 and 1000 nm, though aerodynamic particle sizer (APS) data appear to show that the correction is poor at the largest diameters, which is no surprise as the composition of those particles is likely to be quite different than that of the accumulation mode. This adds to the evidence that UHSAS data must be treated cautiously whenever the aerosol may absorb infrared light. Similar corrections may be required whenever brown carbon aerosol is present.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Chemical imaging of individual stratospheric particles sampled over North America

The increasing size, severity, and frequency of wildfires have led to dramatic increases in particulate matter concentrations in the troposphere. Severe wildfires can generate intense convective systems capable of transporting large quantities of biomass burning organic aerosols (BBOA) to the upper troposphere and lower stratosphere (UTLS). Chemically complex organic matter and light-absorbing carbonaceous material is introduced into stratospheric regions that were historically isolated from direct surface emissions. In this study, stratospheric particles were sampled over North America during the Dynamics and Chemistry of the Summer Stratosphere (DCOTSS) campaign, an aircraft-based research project designed to characterize convective perturbation in the UTLS. Particle samples collected from six research flights during summer 2022 were analyzed using Computer-Controlled Scanning Electron Microscopy and Scanning Transmission X-ray Microscopy to investigate particle size distributions, morphology, chemical composition, and mixing state of stratospheric particles along transects across the continental United States and adjacent Pacific Ocean airspace. Analysis revealed that all sampled particles contained detectable levels of carbon, with most exhibiting organic volume fractions of 0.37 ± 0.20. Notably, about 5% of the particles also contained soot inclusions, which indicates the presence of refractory black carbon transported to stratospheric altitudes and provides direct evidence of wildfire-derived black carbon reaching the UTLS. Typical particle morphology exhibits organic shells over soot and inorganic cores and suggests secondary processing and aging of BBOA during transport to and within the UTLS. These findings provide compelling evidence that wildfire emissions play a critical role in affecting the long-term composition and radiative properties of stratospheric particles.

Sharpe, Steven [Purdue Univ., West Lafayette, IN (↗
DOE OSTI2025

Stirring and peristaltic pumping alter flow electrode particle size and morphology

Flowable carbon-based electrodes are widely studied in electrochemical systems for energy storage and water treatment. Most laboratory- and pilot-scale studies employ active mixing for slurry preparation and handling and use peristaltic pumps for slurry circulation. Magnetic stirring is the most prevalent mixing method at the laboratory scale, and the combination of magnetic mixing and peristaltic pumping is favored for convenience and compatibility with particulate suspensions. However, these methods can strongly affect particle size and morphology (and therefore cell performance). In this study, we evaluate how mixing and pumping influence particle degradation in two commonly used carbon materials: spherical carbon black (CB) beads and powdered activated carbon (AC). We performed 24 h stirring-only experiments using magnetic, orbital, and overhead stirring. Separately, we conducted 32 h circulation experiments using a commercial peristaltic pump. Particle morphology and size were analyzed using optical microscopy and laser diffraction. The initially spherical CB beads (~580 μm, 1.5 wt%) exhibit rapid and extensive breakdown under both peristaltic pumping and magnetic stirring. By comparison, AC particles (initially ~31 μm) tested at 1.5 and 15 wt% showed measurable size reductions of up to ~25 % under either stirring or pumping. In conclusion, these findings highlight the need to account for and quantify morphological changes caused by both stirring and pumping in the design and associated evaluation of flowable electrode systems.

Chemistry↗
DOE OSTI2021

Damage evolution in polymer due to exposure to high-pressure hydrogen gas

The use of hydrogen as a fuel is increasing exponentially, and the most economical way to store and transport hydrogen for fuel use is as a high-pressure gas. Polymers are widely used for hydrogen distribution and storage systems because they are chemically inert towards hydrogen. However, when exposed to high-pressure hydrogen, some hydrogen diffuses through polymers and occupies the preexisting cavities inside the material. Upon depressurization, the hydrogen trapped inside polymer cavities can cause blistering or cracking by expanding these cavities. A continuum mechanics--based deformation model was deployed to predict the stress distribution and damage propagation while the polymer undergoes depressurization after high-pressure hydrogen exposure. The effects of cavity size, cavity location, and pressure inside the cavity on damage initiation and evolution inside the polymer were studied. The stress and damage evolution in the presence of multiple cavities was also studied, because interaction among cavities alters the damage and stress field. It was found that all these factors significantly change the stress state in the polymer, resulting in different paths for damage propagation. The effect of adding carbon black filler particles and plasticizer on the damage was also studied. It was found that damage tolerance of the polymer increases drastically with the addition of carbon black fillers, but decreases with the addition of the plasticizer.

Kulkarni, Shank S.↗
DOE OSTI2020

Modeling Oxygen Transport in High Surface Area Carbon Supports for Polymer-Electrolyte Fuel Cells

Here, an analytical model for resistance to oxygen transport in air electrodes containing carbon black supports with high surface area was developed by combining a Thiele modulus—effectiveness factor approach at the agglomerate scale (~150 nm) with nanoscale diffusional resistance in carbon micropores/pits (~5 nm). This paper extends an earlier model for transport resistance to platinum nanoparticles on low surface area carbon. Differences in transport resistances between catalyst layers with high and low surface area carbon blacks predicted by the model with reasonable geometric dimensions and physical properties are consistent with experimental observations.

08 HYDROGEN↗
DOE OSTI2020

Capacitive deionization using carbon derived from an array of zeolitic-imidazolate frameworks

Capacitive deionization (CDI) represents one of the most thermodynamically efficient technologies for brackish water desalination. Its performance is highly reliant on the surface properties of carbon-based electrodes. Zeolitic-imidazolate framework (ZIF)-derived carbon materials have emerged among the most promising candidates owing to their high structural and compositional tuneability. However, the impacts of the precursory ZIF structure on the properties of the final carbon, and therefore, CDI capacity and efficiency remain to be further explored. In this work, four Zn-based ZIFs with different side-chain substitutions on the imidazolates were synthesized on a gram scale with high yields to produce N-doped carbons by pyrolysis. Next, the resulting carbons along with four commercial carbon blacks were characterized physically and electrochemically to explore the structure-performance relationship. We demonstrated that the imidazole side-chain substitution alters the ZIF's decomposition during pyrolysis, influencing the elemental compositions, surface properties, wettability and graphitization levels. The diverse carbon properties result in variable double layer capacitance and charge-transfer resistance, ultimately impacting the CDI performance. Among these carbons, Zn (4abIm)2-C afforded the greatest salt adsorption capacity of 14.19 mg NaCl $·g_C^{–1}$, while Zn (mIm) 2 -C showed the highest overall salt adsorption capacity and rate; both exceeded the performance of the commercial carbon blacks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Boosting CO2R Performance of Ag Electrocatalysts by Sulfur-Doped Carbon Support

We find that S-doped carbon support can boost the CO2 reduction (CO2R) performance of Ag electrocatalysts. Firstly, surface science enabled electrocatalysis showed that Ag supported on S-doped highly oriented pyrolytic graphite (HOPG), a model electrocatalyst, demonstrated 100% higher CO turnover frequency (TOFCO = 3.6 ± 0.2 CO/atomAg/s) than that supported on S-free HOPG (TOFCO = 1.8 ± 0.2 CO/atomAg/s). Computational modeling based on density functional theory (DFT) revealed a more stabilized *COOH intermediate on Ag supported on S-doped carbon and thus a more favorable energetic pathway of CO2-to-CO, consistent with experimental results from the model electrocatalysts studies. Finally, this proof of concept was translated to the synthesis of powder electrocatalyst with 2 wt% Ag supported on S-doped carbon black, demonstrating > 40-fold high CO mass activity than a commercial Ag cathode with steady FECO ~ 96% at 100 mA/cm2 for 50 hours of continuous operation in a gas diffusion electrode (GDE) electrolyzer. For comparison, 2 wt% Ag supported on carbon black without S- doping showed a maximum FECO ~ 70% at 100 mA/cm2. This work demonstrates a successful bottom-up design of CO2R electrocatalysts guided by surface science enabled electrocatalysis.

CO2 conversion↗
DOE OSTI2023

Pyrocumulonimbus Events Over British Columbia in 2017: An Ensemble Model Study of Parameter Sensitivities and Climate Impacts of Wildfire Smoke in the Stratosphere

Abstract The Pyrocumulonimbus (pyroCb) events over British Columbia in 2017 were observed in the lower stratosphere for about 8–10 months after the smoke injections. Several previous studies used global climate models to investigate the physical parameters for the 2017 pyroCb events, but the conclusions show strong model dependency. In this study, we use the Energy Exascale Earth System Model (E3SM) and complete an ensemble of runs exploring three injection parameters: smoke aerosol mass, the percentage of black carbon within the smoke aerosols, and plume injection height. Additionally, we consider the heterogeneous reaction of ozone and primary organic matter. According to the satellite daily observed aerosol optical depth (AOD), we find that the best ensemble member is the simulation with 0.4 Tg of smoke, 3% of which is black carbon, a 13.5 km smoke injection height, and a 10 −5 probability factor of the heterogeneous reaction. Besides AOD, we examine the ensemble score based on the metrics used in previous studies: the metrics of the extinction coefficient at 18 km altitude and the maximum plume height. The conclusion of the best estimate of the injection parameters for 2017 pyroCb events shows strong not only model but also evaluation metric dependency. We use the Random Forest machine learning technique to quantify the relative importance of each parameter in accurately simulating the 2017 pyroCb events and find that the injection height is the most critical feature, no matter which metric is used to score the ensemble members.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Life cycle analysis of hydrogen production via methane pyrolysis using plasma arc

Steam methane reforming of natural gas is the primary method of producing hydrogen in the United States, accounting for 95% of all hydrogen produced there. Methane pyrolysis, an alternative production pathway that decomposes natural gas into solid carbon and hydrogen, both eliminates CO 2 emissions associated with methane reforming and allows for additional income from carbon black. A life-cycle inventory of this process has been developed using ASPEN Plus to model the methane pyrolysis (plasma arc) process. From well to gate, hydrogen production via methane pyrolysis produces 2.78 kg CO 2 e/kg H 2 of greenhouse gas emissions using mass allocation of emissions between hydrogen and carbon black coproducts. The well-to-gate emissions are mainly driven by electricity consumption (∼38 kW h/kg H 2 ), which accounts for 81% of the emissions; if renewable electricity is used, well-to-gate emissions can be reduced to −0.448 kg CO 2 e/kg H 2 .

08 HYDROGEN↗