Search NASA⌕ Search

SEARCH · Search NASA

Results for “climate simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Leveraging regional mesh refinement to simulate future climate projections for California using the Simplified Convection-Permitting E3SM Atmosphere Model Version 0

Abstract. The spatial heterogeneity related to complex topography in California demands high-resolution (< 5 km) modeling, but global convection-permitting climate models are computationally too expensive to run multi-decadal simulations. We developed a 3.25 km California climate modeling framework by leveraging regional mesh refinement (CARRM) using the U.S. Department of Energy (DOE)'s global Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM) version 0. Four 5-year time periods (2015–2020, 2029–2034, 2044–2049, and 2094–2099) were simulated by nudging CARRM outside California to 1° coupled simulation of E3SMv1 under the Shared Socioeconomic Pathways (SSP)5-8.5 future scenario. The 3.25 km grid spacing adds considerable value to the prediction of the California climate changes, including more realistic high temperatures in the Central Valley and much improved spatial distributions of precipitation and snowpack in the Sierra Nevada and coastal stratocumulus. Under the SSP5-8.5 scenario, CARRM simulation predicts widespread warming of 6–10 °C over most of California, a 38 % increase in statewide average 30 d winter–spring precipitation, a near-complete loss of the alpine snowpack, and a sharp reduction in shortwave cloud radiative forcing associated with marine stratocumulus by the end of the 21st century. We note a climatological wet precipitation bias for the CARRM and discuss possible reasons. We conclude that SCREAM RRM is a technically feasible and scientifically valid tool for climate simulations in regions of interest, providing an excellent bridge to global convection-permitting simulations.

58 GEOSCIENCES↗

Global Changes of the Water Cycle Intensity

In this study, we evaluate numerical simulations of the twentieth century climate, focusing on the changes in the intensity of the global water cycle. A new diagnostic of atmospheric water vapor cycling rate is developed and employed, that relies on constituent tracers predicted at the model time step. This diagnostic is compared to a simplified traditional calculation of cycling rate, based on monthly averages of precipitation and total water content. The mean sensitivity of both diagnostics to variations in climate forcing is comparable. However, the new diagnostic produces systematically larger values and more variability than the traditional average approach. Climate simulations were performed using SSTs of the early (1902-1921) and late (1979- 1998) twentieth century along with the appropriate C02 forcing. In general, the increase of global precipitation with the increases in SST that occurred between the early and late twentieth century is small. However, an increase of atmospheric temperature leads to a systematic increase in total precipitable water. As a result, the residence time of water in the atmosphere increased, indicating a reduction of the global cycling rate. This result was explored further using a number of 50-year climate simulations from different models forced with observed SST. The anomalies and trends in the cycling rate and hydrologic variables of different GCMs are remarkably similar. The global annual anomalies of precipitation show a significant upward trend related to the upward trend of surface temperature, during the latter half of the twentieth century. While this implies an increase in the hydrologic cycle intensity, a concomitant increase of total precipitable water again leads to a decrease in the calculated global cycling rate. An analysis of the land/sea differences shows that the simulated precipitation over land has a decreasing trend while the oceanic precipitation has an upward trend consistent with previous studies and the available observations. The decreasing continental trend in precipitation is located primarily over tropical land regions, with some other regions, such as North America experiencing an increasing trend. Precipitation trends are diagnosed further using the water tracers to delineate the precipitation that occurs because of continental evaporation, as opposed to oceanic evaporation. These diagnostics show that over global land areas, the recycling of continental moisture is decreasing in time. However, the recycling changes are not spatially uniform so that some regions, most notably over the United States, experience continental recycling of water that increases in time.

Bosilovich, Michael G.↗

Variational AutoEncoders Reveal Intensifying GPP Extremes in Continental United States based on CESM2 Simulations

Climate extremes significantly impact terrestrial carbon cycle dynamics, necessitating robust methods for detecting and analyzing anomalous behavior in plant productivity. This study presents a novel application of variational autoencoders (VAE) for identifying extreme events in gross primary productivity (GPP) from Community Earth System Model version 2 simulations across four AR6 regions in the Continental United States. We compare VAE-based anomaly detection with traditional singular spectral analysis (SSA) methods across three time periods: 1850-80, 1950-80, and 2050-80 under SSP5-8.5 scenario. The VAE architecture employs three dense layers and a latent space with input sequence length of 12 months, training on normalized GPP time series to reconstruct the GPP and identify anomalies based on reconstruction errors. Extreme events are defined using 5th percentile thresholds applied to both VAE and SSA anomalies. Results demonstrate strong regional agreement between VAE and SSA methods in spatial patterns of extreme event frequencies, despite VAE consistently producing higher threshold values (179-756 GgC for VAE vs. 100-784 GgC for SSA across regions and periods). Both methods reveal increasing magnitudes and frequencies of negative carbon cycle extremes toward 2050-80, particularly in Western and Central North America. The VAE approach shows comparable performance to established SSA techniques while offering computational advantages and enhanced capability for capturing non-linear temporal dependencies in carbon cycle variability. This research demonstrates the potential of deep learning approaches for extremes detection and provides a foundation for improved understanding of future carbon cycle risks under future conditions.

Sharma, Bharat [ORNL] (ORCID:0000000266982487)↗

Explicit Representation of Orographic Anisotropy for All Directions Improves Nanling Mountain Rainfall Simulation

Climate models exhibit significant rainfall bias in mountainous regions. One reason is the insufficient representation of orographic anisotropy in these models. In this study, we implement the orographic drag scheme with 3-D orographic anisotropy (all flow directions (AFD)) into a general circulation model and investigate its impact on Nanling rainfall simulation where models have systematic dry bias in the summer. It is shown that the AFD alleviated the Nanling mountain rainfall bias by over 60%. This is through an anomalous “lower-convergence-higher-divergence” deceleration pattern of the flow windward of the Nanling Mountains that enhanced vertical motion and low-level moisture convergence. The results suggest the importance of explicit orographic anisotropy representation in rainfall simulation in mountainous regions.

54 ENVIRONMENTAL SCIENCES↗

Tropical cloud feedbacks and natural variability of climate

Simulations of natural variability by two general circulation models (GCMs) are examined. One GCM is a sector model, allowing relatively rapid integration without simplification of the model physics, which would potentially exclude mechanisms of variability. Two mechanisms are found in which tropical surface temperature and sea surface temperature (SST) vary on interannual and longer timescales. Both are related to changes in cloud cover that modulate SST through the surface radiative flux. Over the equatorial ocean, SST and surface temperature vary on an interannual timescale, which is determined by the magnitude of the associated cloud cover anomalies. Over the subtropical ocean, variations in low cloud cover drive SST variations. In the sector model, the variability has no preferred timescale, but instead is characterized by a 'red' spectrum with increasing power at longer periods. In the terrestrial GCM, SST variability associated with low cloud anomalies has a decadal timescale and is the dominant form of global temperature variability. Both GCMs are coupled to a mixed layer ocean model, where dynamical heat transports are prescribed, thus filtering out El Nino-Southern Oscillation (ENSO) and thermohaline circulation variability. The occurrence of variability in the absence of dynamical ocean feedbacks suggests that climatic variability on long timescales can arise from atmospheric processes alone.

Miller, R. L.↗

Investigation of models for large scale meteorological prediction experiments

Long-range numerical prediction and climate simulation experiments with various global atmospheric general circulation models are reported. A chronological listing of the titles of all publications and technical reports already distributed is presented together with an account of the most recent reseach. Several reports on a series of perpetual January climate simulations with the GISS coarse mesh climate model are listed. A set of perpetual July climate simulations with the same model is presented and the results are described.

Spar, J.↗

Mesoscale convective systems in the third pole region: Characteristics, mechanisms and impact on precipitation

The climate system of the Third Pole region, including the (TP) and its surroundings, is highly sensitive to global warming. Mesoscale convective systems (MCSs) are understood to be a vital component of this climate system. Driven by the monsoon circulation, surface heating, and large-scale and local moisture supply, they frequently occur during summer and mostly over the central and eastern TP as well as in the downstream regions. Further, MCSs have been highlighted as important contributors to total precipitation as they are efficient rain producers affecting water availability (seasonal precipitation) and potential flood risk (extreme precipitation) in the densely populated downstream regions. The availability of multi-decadal satellite observations and high-resolution climate model datasets has made it possible to study the role of MCSs in the under-observed TP water balance. However, the usage of different methods for MCS identification and the different focuses on specific subregions currently hamper a systematic and consistent assessment of the role played by MCSs and their impact on precipitation over the TP headwaters and its downstream regions. Here, we review observational and model studies of MCSs in the TP region within a common framework to elucidate their main characteristics, underlying mechanisms, and impact on seasonal and extreme precipitation. We also identify major knowledge gaps and provide suggestions on how these can be addressed using recently published high-resolution model datasets. Three important identified knowledge gaps are 1) the feedback of MCSs to other components of the TP climate system, 2) the impact of the changing climate on future MCS characteristics, and 3) the basin-scale assessment of flood and drought risks associated with changes in MCS frequency and intensity. A particularly promising tool to address these knowledge gaps are convection-permitting climate simulations. Therefore, the systematic evaluation of existing historical convection-permitting climate simulations over the TP is an urgent requirement for reliable future climate change assessments.

54 ENVIRONMENTAL SCIENCES↗

Resolving Orbital and Climate Keys of Earth and Extraterrestrial Environments with Dynamics (ROCKE-3D) 1.0: A General Circulation Model for Simulating the Climates of Rocky Planets

Resolving Orbital and Climate Keys of Earth and Extraterrestrial Environments with Dynamics (ROCKE-3D) is a three-dimensional General Circulation Model (GCM) developed at the NASA Goddard Institute for Space Studies for the modeling of atmospheres of solar system and exoplanetary terrestrial planets. Its parent model, known as ModelE2, is used to simulate modern Earth and near-term paleo-Earth climates. ROCKE-3D is an ongoing effort to expand the capabilities of ModelE2 to handle a broader range of atmospheric conditions, including higher and lower atmospheric pressures, more diverse chemistries and compositions, larger and smaller planet radii and gravity, different rotation rates (from slower to more rapid than modern Earth's, including synchronous rotation), diverse ocean and land distributions and topographies, and potential basic biosphere functions. The first aim of ROCKE-3D is to model planetary atmospheres on terrestrial worlds within the solar system such as paleo-Earth, modern and paleo-Mars, paleo-Venus, and Saturn's moon Titan. By validating the model for a broad range of temperatures, pressures, and atmospheric constituents, we can then further expand its capabilities to those exoplanetary rocky worlds that have been discovered in the past, as well as those to be discovered in the future. We also discuss the current and near-future capabilities of ROCKE-3D as a community model for studying planetary and exoplanetary atmospheres.

Astrobiology↗

Retreat and Regrowth of the Greenland Ice Sheet During the Last Interglacial as Simulated by the CESM2‐CISM2 Coupled Climate–Ice Sheet Model

Abstract During the Last Interglacial, approximately 129 to 116 ka (thousand years ago), the Arctic summer climate was warmer than the present, and the Greenland Ice Sheet retreated to a smaller extent than its current state. Previous model‐derived and geological reconstruction estimates of the sea‐level contribution of the Greenland Ice Sheet during the Last Interglacial vary widely. Here, we conduct a transient climate simulation from 127 to 119 ka using the Community Earth System Model (CESM2), which includes a dynamic ice sheet component (the Community Ice Sheet Model, CISM2) that is interactively coupled to the atmosphere, land, ocean, and sea ice components. Vegetation distribution is updated every 500 years based on biomes simulated using a monthly climatology to force the BIOME4 equilibrium vegetation model. Results show a substantial retreat of the Greenland Ice Sheet, reaching a minimum extent at 121.9 ka, equivalent to a 3.0 m rise in sea level relative to the present day, followed by gradual regrowth. In contrast, a companion simulation employing static vegetation based on pre‐industrial conditions shows a much smaller ice‐sheet retreat, highlighting the importance of the changes in high‐latitude vegetation distribution for amplifying the ice‐sheet response.

54 ENVIRONMENTAL SCIENCES↗

Data-Driven Exploration of Climate Attractor Manifolds For Long-Term Predictability

Focal Area: This white paper responds to Focal Area 3. We seek to gain insight into decadal-scale climate predictability by applying novel manifold-finding probabilistic AI techniques to the complex data produced by Earth System models (ESMs) such as E3SM. The associated portfolio of research activities leverages DOE’s asset mix of HPC platforms, climate expertise, climate simulation codes, and AI expertise. Science Challenge: Climate and climate models are dynamical systems exhibiting properties that are interpretable through chaos theory. The theory contains an important concept that is relevant to multi-decade-scale climate prediction: a chaotic attractor. While the space containing all the possible states of the Earth’s atmosphere and ocean, the possible weather, is large, the realized states tend to stay near the smaller-dimensioned attractor. This behavior is responsible for the “order behind the irregularity” [1] of climate phenomena. Climate change can be thought of as a change in the properties of the attractor, and predicting the climate over years to decades is equivalent to predicting how those properties will change. To date, the attractor has been a useful conceptual tool, but has not been amenable to direct characterization. A new development is the advent of efficient high-dimensional manifold-finding probabilistic AI techniques, which permit a data-driven characterization of the ESM attractor and its probability distribution over weather states. Such a characterization would result in a natural dimensional reduction — a “non-linear Principal Components Analysis (PCA) adapted to climate simulation data” — leading to important advances in scenario-based long-term climate prediction, long-term prediction of water cycle extremes, ESM verification, inter-model comparison, and process model development.

54 ENVIRONMENTAL SCIENCES↗

Synthetic Scenarios from CMIP5 Model Simulations for Climate Change Impact Assessments in Managed Ecosystems and Water Resources: Case Study in South Asian Countries

Increasing population, urbanization, and associated demand for food production compounded by climate change and variability have important implications for the managed ecosystems and water resources of a region. This is particularly true for south Asia, which supports one quarter of the global population, half of whom live below the poverty line. This region is largely dependent on monsoon precipitation for water. Given the limited resources of the developing countries in this region, the objective of our study was to empirically explore climate change in south Asia up to the year 2099 using monthly simulations from 35 global climate models (GCMs) participating in the fifth phase of the Climate Model Inter-comparison Project (CMIP5) for two future emission scenarios (representative concentration pathways RCP4.5 and RCP8.5) and provide a wide range of potential climate change outcomes. This was carried out using a three-step procedure: calculating the mean annual, monsoon, and non-monsoon precipitation and temperatures; estimating the percent change from historical conditions; and developing scenario funnels and synthetic scenarios. This methodology was applied for the entire south Asia region; however, the percent change information generated at 1.5deg grid scale can be used to generate scenarios at finer spatial scales. Our results showed a high variability in the future change in precipitation (-23% to 52%, maximum in the non-monsoon season) and temperature (0.8% to 2.1%) in the region. Temperatures in the region consistently increased, especially in the Himalayan region, which could have impacts including a faster retreat of glaciers and increased floods. It could also change rivers from perennial to seasonal, leading to significant challenges in water management. Increasing temperatures could further stress groundwater reservoirs, leading to withdrawal rates that become even more unsustainable. The high precipitation variability (with higher propensity for localized intense rainfall events) observed in the region can be a key factor for managed ecosystems and water management and could also lead to more incidence of severe urban flooding. The results could be used to assess both mitigation and adaptation alternatives to reduce vulnerabilities in managed ecosystems (agricultural and urban) and water resources.

agriculture↗

Does Dynamical Downscaling Introduce Novel Information in Climate Model Simulations of Recipitation Change over a Complex Topography Region?

Current climate and future climate-warming runs with the RegCM Regional Climate Model (RCM) at 50 and 11 km-resolutions forced by the ECHAM GCM are used to examine whether the increased resolution of the RCM introduces novel information in the precipitation field when the models are run for the mountainous region of the Hellenic peninsula. The model results are inter-compared with the resolution of the RCM output degraded to match that of the GCM, and it is found that in both the present and future climate runs the regional models produce more precipitation than the forcing GCM. At the same time, the RCM runs produce increases in precipitation with climate warming even though they are forced with a GCM that shows no precipitation change in the region. The additional precipitation is mostly concentrated over the mountain ranges, where orographic precipitation formation is expected to be a dominant mechanism. It is found that, when examined at the same resolution, the elevation heights of the GCM are lower than those of the averaged RCM in the areas of the main mountain ranges. It is also found that the majority of the difference in precipitation between the RCM and the GCM can be explained by their difference in topographic height. The study results indicate that, in complex topography regions, GCM predictions of precipitation change with climate warming may be dry biased due to the GCM smoothing of the regional topography.

Tselioudis, George↗

Causally‐Informed Deep Learning to Improve Climate Models and Projections

Abstract Climate models are essential to understand and project climate change, yet long‐standing biases and uncertainties in their projections remain. This is largely associated with the representation of subgrid‐scale processes, particularly clouds and convection. Deep learning can learn these subgrid‐scale processes from computationally expensive storm‐resolving models while retaining many features at a fraction of computational cost. Yet, climate simulations with embedded neural network parameterizations are still challenging and highly depend on the deep learning solution. This is likely associated with spurious non‐physical correlations learned by the neural networks due to the complexity of the physical dynamical system. Here, we show that the combination of causality with deep learning helps removing spurious correlations and optimizing the neural network algorithm. To resolve this, we apply a causal discovery method to unveil causal drivers in the set of input predictors of atmospheric subgrid‐scale processes of a superparameterized climate model in which deep convection is explicitly resolved. The resulting causally‐informed neural networks are coupled to the climate model, hence, replacing the superparameterization and radiation scheme. We show that the climate simulations with causally‐informed neural network parameterizations retain many convection‐related properties and accurately generate the climate of the original high‐resolution climate model, while retaining similar generalization capabilities to unseen climates compared to the non‐causal approach. The combination of causal discovery and deep learning is a new and promising approach that leads to stable and more trustworthy climate simulations and paves the way toward more physically‐based causal deep learning approaches also in other scientific disciplines.

Meteorology & Atmospheric Sciences↗

Evaluation of extreme sub-daily precipitation in high-resolution global climate model simulations

We examine the resolution dependence of errors in extreme sub-daily precipitation in available high-resolution climate models. We find that simulated extreme precipitation increases as horizontal resolution increases but that appropriately constructed model skill metrics do not significantly change. We find little evidence that simulated extreme winter or summer storm processes significantly improve with the resolution because the model performance changes identified are consistent with expectations from scale dependence arguments alone. We also discuss the implications of these scale-dependent limitations on the interpretation of simulated extreme precipitation.

54 ENVIRONMENTAL SCIENCES↗

Clouds in GEOS-5

The GEOS-5 atmospheric model is being developed as a weather-and-climate capable model. It must perform well in assimilation mode as well as in weather and climate simulations and forecasts and in coupled chemistry-climate simulations. In developing GEOS-5, attention has focused on the representation of moist processes. The moist physics package uses a single phase prognostic condensate and a prognostic cloud fraction. Two separate cloud types are distinguished by their source: "anvil" cloud originates in detraining convection, and large-scale cloud originates in a PDF-based condensation calculation. Ice and liquid phases for each cloud type are considered. Once created, condensate and fraction from the anvil and statistical cloud types experience the same loss processes: evaporation of condensate and fraction, auto-conversion of liquid or mixed phase condensate, sedimentation of frozen condensate, and accretion of condensate by falling precipitation. The convective parameterization scheme is the Relaxed Arakawa-Schubert, or RAS, scheme. Satellite data are used to evaluate the performance of the moist physics packages and help in their tuning. In addition, analysis of and comparisons to cloud-resolving models such as the Goddard Cumulus Ensemble model are used to help improve the PDFs used in the moist physics. The presentation will show some of our evaluations including precipitation diagnostics.

Bacmeister, Julio↗

The ongoing need for high-resolution regional climate models: Process understanding and stakeholder information

Regional climate modeling addresses our need to understand and simulate climatic processes and phenomena unresolved in global models. High resolution models are generally more skillful in simulating extremes, such as heavy precipitation, strong winds, and severe storms. In addition, research has shown that fine-scale features such as mountains, coastlines, lakes, irrigation, land use, and urban heat islands can substantially influence a region’s climate and its response to changing forcings. Regional climate simulations explicitly simulating convection are now being performed, providing an opportunity to illuminate new physical behavior that previously was represented by parameterizations with large uncertainties. Regional and global models are both advancing toward higher resolution, as computational capacity increases. However, the resolution and ensemble size necessary to produce a sufficient statistical sample of these processes in global models has proven too costly for contemporary supercomputing systems. Regional climate models are thus indispensable tools that complement global models for understanding regional climate variability and change, and are critical for supporting societal responses to changing climate.

Gutowski, William↗

ROCKE-3D 2.0: An Updated General Circulation Model for Simulating the Climates of Rocky Planets

We present the second generation of ROCKE-3D (Resolving Orbital and Climate Keys of Earth and Extraterrestrial Environments with Dynamics), the generalized 3-dimensional General Circulation Model (GCM) for use in Solar System and exoplanetary simulations of rocky planet climates. ROCKE-3D version 2.0 is a descendant of GISS ModelE2.1, the flagship GCM of the NASA Goddard Institute for Space Studies (GISS) used in the most recent Intergovernmental Panel for Climate Change (IPCC) assessment. ROCKE-3D is a continuous effort to expand the capabilities of GISS ModelE to handle a broader range of atmospheric conditions, including different atmospheric planet sizes, gravities, pressures, rotation rates, more diverse chemistries and atmospheric compositions, diverse ocean and land distributions and topographies, and potential basic biosphere functions. We present in this release many more supported configurations which can serve as starting points to simulate terrestrial planets of interest. Two different radiation schemes are supported, the GISS radiation, valid for Earth-like planets, and SOCRATES, which is more generalized but requires more CPU resources. In addition, three different atmospheric compositions are supported, three ocean configurations (prescribed, q-flux, and dynamic), and two resolutions: the medium resolution (4 x 5 degrees in latitude x longitude) used in ROCKE-3D 1.0, and the fine resolution, which has double the resolution in the atmosphere and 4 times the resolution in the ocean. We quantify how the different component choices affect model results, and discuss strengths and limitations of using each component, together with how one can select which component to use. ROCKE-3D is publicly available and tutorial sessions are available for the community, greatly facilitating its use by any interested group.

ROCKE-3D↗