Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud fraction and pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Water vapor in Jupiter's atmosphere

High spectral resolution observations of Jupiter at 2.7 and 5 microns acquired from the Kuiper Airborne Observatory were used to infer the vertical distribution of H2O between 0.7 and 6 bars. The H2O mole fraction, qH2O, is saturated for P<2 bars, qH2O = 4x.000001 in the 2 to 4 bar range and it increases to 3x.00001 at 6 bars where T = 288 K. The base of the 5 micron line formation region is determined by pressure-induced H2 opacity. At this deepest accessible level, the O/H ratio in Jupiter is depleted by a factor of 50 with respect to the solar atmosphere. High spatial resolution Voyager IRIS spectra of Jupiter's North Tropical Zone, Equatorial Zone, and Hot Spots in the North and South Equatorial Belt were analyzed to determine the spatial variation of H2O across the planet. The column abundance of H2O above the 4 bar level is the same in the zones as in the SEB Hot Spots, about 20 cm-amgt. A cloud model for Jupiter's belts and zones was developed in order to fit the IRIS 5 micron spectra. An absorbing cloud located at 2 bars whose 5 micron optical thickness varies between 1 in the Hot Spots and 4 in the coldest zones satisfactorily matches the IRIS data.

Bjoraker, G. L.↗

Longwave Band-by-band Cloud Radiative Effect and its Application in GCM Evaluation

The cloud radiative effect (CRE) of each longwave (LW) absorption band of a GCM fs radiation code is uniquely valuable for GCM evaluation because (1) comparing band-by-band CRE avoids the compensating biases in the broadband CRE comparison and (2) the fractional contribution of each band to the LW broadband CRE (f(sub CRE)) is sensitive to cloud top height but largely insensitive to cloud fraction, presenting thus a diagnostic metric to separate the two macroscopic properties of clouds. Recent studies led by the first author have established methods to derive such band ]by ]band quantities from collocated AIRS and CERES observations. We present here a study that compares the observed band-by-band CRE over the tropical oceans with those simulated by three different atmospheric GCMs (GFDL AM2, NASA GEOS-5, and CCCma CanAM4) forced by observed SST. The models agree with observation on the annual ]mean LW broadband CRE over the tropical oceans within +/-1W/sq m. However, the differences among these three GCMs in some bands can be as large as or even larger than +/-1W/sq m. Observed seasonal cycles of f(sub CRE) in major bands are shown to be consistent with the seasonal cycle of cloud top pressure for both the amplitude and the phase. However, while the three simulated seasonal cycles of f(sub CRE) agree with observations on the phase, the amplitudes are underestimated. Simulated interannual anomalies from GFDL AM2 and CCCma CanAM4 are in phase with observed anomalies. The spatial distribution of f(sub CRE) highlights the discrepancies between models and observation over the low-cloud regions and the compensating biases from different bands.

Huang, Xianglei↗

Examining the Feasibility of Detailed Decomposition of Radiative Flux Anomalies to Cloud Changes

This presentation will explore the degree to which radiative flux anomalies in the last two decades seen by CERES can be interpreted as the result of changes in particular cloud types. A study of this kind is potentially enabled by the new CERES FlxByCldTyp (FBCT) product which provides combined Terra and Aqua daytime 1°-regional gridded daily and monthly top-of-the-atmosphere radiative fluxes and associated MODIS-derived cloud properties stratified by Cloud Top Pressure (CTP) and Cloud Optical Thickness (TAU), i.e., arrays of cloud properties and radiative fluxes resolved in CTP-TAU bins. It has been shown (Sun et al. 2022) that the FBCT time series of global flux anomalies tracks closely its SSF1deg and EBAF counterparts, indicating that these three products provide fluxes of consistent stability for interannual variability studies. We are thus in position to examine whether CERES regional or global radiative fluxes anomalies and trends are driven by changes in certain elements of FBCT flux arrays corresponding to particular cloud types. Anomalies in flux array elements will in turn be investigated in terms of cloud property variations within the CTP-TAU bins where the biggest flux anomalies are encountered. We will essentially seek to obtain the relative contributions to the anomalies of binned all-sky fluxes of changes in cloud fraction within cloud types and of changes in their overcast fluxes modulated by other cloud properties. Such an analysis holds great promise of unveiling the root causes of cloud-driven changes in the planetary radiation budget of the last two decades.

cloud↗

Collapse and fragmentation of molecular cloud cores. 2: Collapse induced by stellar shock waves

The standard scenario for low-mass star formation involves 'inside-out' collapse of a dense molecular cloud core following loss of magnetic field support through ambipolar diffusion. However, isotopic anomalies in presolar grains and meteoritical inclusions imply that the collapse of the presolar cloud may have been triggered by a stellar shock wave. This paper explores 'outside-in' collapse, that is, protostellar collapse initiated directly by the compression of quiescent dense cloud cores impacted by relatively slow stellar shock waves. A second-order accurate, gravitational hydrodynamics code has been used to study both the spherically symmetrical and three-dimensional evolution of initially centrally condensed, isothermal, self-gravitating, solar-mass cloud cores that are struck by stellar shock waves with velocities up to 25 km/s and postshock temperatures of 10 to 10,000 K. The models show that such mild shock waves do not completely shred and destroy the cloud, and that the dynamical ram pressure can compress the cloud to the verge of self-gravitational collapse. However, compression caused by a high postshock temperature is a considerably more effective means of inducing collapse. Shock-induced collapse produces high initial mass accretion rates (greater than 10(exp -4) solar mass/yr in a solar-mass cloud) that decline rapidly to much lower values, depending on the presence (approximately 10(exp -6) solar mass/yr) or absence (approximately 10(exp -8) to 10(exp -7) solar mass/yr) of an infinite reservoir of mass. Stellar mass accretion rates approximately 10(exp -7) solar mass/yr have been previously inferred from the luminosities of T Tauri stars; balanced mass accretion (stellar rate = envelope rate) at approximately 10(exp -7) solar mass/yr could then be possible if accretion occurs from a finite mass reservoir. Fluid tracers are used to determine what fraction of the stellar shock material is incorporated into the resulting protostellar object and disk; roughly half the impinging material is injected into the collapsing cloud core when there is a high postshock temperature. The models are consistent with a scenario where an AGB star wind triggered the collapse of the presolar cloud while injecting about 0.01 solar mass of matter derived from the AGB star envelope, as has been separately inferred on the basis of nucleosynthesis calculations.

Boss, Alan P.↗

Fast Simulators for Satellite Cloud Optical Centroid Pressure Retrievals, 1. Evaluation of OMI Cloud Retrievals

The cloud Optical Centroid Pressure (OCP), also known as the effective cloud pressure, is a satellite-derived parameter that is commonly used in trace-gas retrievals to account for the effects of clouds on near-infrared through ultraviolet radiance measurements. Fast simulators are desirable to further expand the use of cloud OCP retrievals into the operational and climate communities for applications such as data assimilation and evaluation of cloud vertical structure in general circulation models. In this paper, we develop and validate fast simulators that provide estimates of the cloud OCP given a vertical profile of optical extinction. We use a pressure-weighting scheme where the weights depend upon optical parameters of clouds and/or aerosol. A cloud weighting function is easily extracted using this formulation. We then use fast simulators to compare two different satellite cloud OCP retrievals from the Ozone Monitoring Instrument (OMI) with estimates based on collocated cloud extinction profiles from a combination of CloudS at radar and MODIS visible radiance data. These comparisons are made over a wide range of conditions to provide a comprehensive validation of the OMI cloud OCP retrievals. We find generally good agreement between OMI cloud OCPs and those predicted by CloudSat. However, the OMI cloud OCPs from the two independent algorithms agree better with each other than either does with the estimates from CloudSat/MODIS. Differences between OMI cloud OCPs and those based on CloudSat/MODIS may result from undetected snow/ice at the surface, cloud 3-D effects, low altitude clouds missed by CloudSat, and the fact that CloudSat only observes a relatively small fraction of an OMI field-of-view.

Joiner, J.↗

The origin of chromitic chondrules and the volatility of Cr under a range of nebular conditions

We characterize ten chromatic chondrules, two spinelian chondrules andd one spinel-bearing chondrule and summarize data for 120 chromitic inclusions discovered in an extensive survey of ordinary chondrites. Compositional and petrographic evidence suggests that chromitic chondrules and inclusions are closely related. The Cr/(Cr + Al) ratios in the spinal of these objects range from 0.5 to 0.9 and bulk Al2O3 contents are uniformly high (greater than 10 wt%, except for one with 8 wt%). No other elements having comparable solar abundances are so stongly enriched, and alkali feldspar and merrillite are more common than in normal chondrules. The Cr/Mg ratios in chromitic chondrules are 180-750 times the ratios in the bulk chondrite. With the possible exception of magnetic clumping of chromite in the presolar cloud, mechanical processes cannot account for this enrichment. Examination of nebular equilibrium processes shows that 50%-condensation temperatures of Cr at pH2/pH2O of 1500 are several tens of degrees below those of Mg as Mg2SiO4; the condensation of Cr is primarily as MgCr2O4 dissolved in MgAl2O4 at nebular pressures of 10(exp -4) atm or below. At pH2 = 10(exp -3) atm condesation as Cr in Fe-Ni is favored. Making the nebula much more oxidizing reduces the difference in condensation temperatures but Mg remains more refractory. We conclude that nebular equilibrium processes are not responsible for the enhanced Cr/Mg ratios. We propose that both Cr and Al became enriched in residues formed by incomplete evaporation of presolar lumps. We suggest that spinals remained as solid phases when the bulk of the silicates were incorporated into the evaporating melt; vaporization of Al and Cr were inhibited by the slow kinetics of diffusion. Subsequent melting and crystallization of these residues fractionated Cr from Al. The resulting materials constituted major components in the precursors of chromitic chondrules. Our model implies that chromitic chondrules and inclusions preserve the Cr isotopic record of presolar sources.

Krot, Alexander↗

A Lagrangian Study of the Transition from Shallow to Deep Convection Using ASR Observations and Les Simulations (Final Report)

With the support from this grant, we have made the following accomplishments. We have found that a formula for fractional entrainment rate, a key aspect for parameterization moist convection, that works for both shallow and deep convection, which provide a promising direction for unified treatment of entrainment for both shallow and deep convection. We also examined the formulation of vertical velocity and showed that the effect of non-hydrostatic pressure and entrainment on vertical velocity are not constants, as assumed in past studies, but can be computed using a simple model for the cloudy updrafts. These results also apply to both deep and shallow convection, which opens the door for a more physically based parameterization of the updraft vertical velocity. We have also conducted extensive analysis of the RACORO aircraft data and have published the results in Wei et al. (2020). We have made extensive effort scrutinizing the data in detail and examining the various hypotheses with the aid of the LES simulations. This was the first application of the modified Paluch diagram on modern aircraft data and the first comprehensive analysis of mixing in clouds using real data (instead of only LES output) in a very long time. These analyses enhanced the science return of the ASR aircraft measurements. This grant also supported a study of the collisions among cold pools and an effort to build parameterizations of moist convection using tools developed in control theory.

42 ENGINEERING↗

Maximum Evaporation Rates of Water Droplets Approaching Obstacles in the Atmosphere Under Icing Conditions

When a closed body or a duct envelope moves through the atmosphere, air pressure and temperature rises occur ahead of the body or, under ram conditions, within the duct. If cloud water droplets are encountered, droplet evaporation will result because of the air-temperature rise and the relative velocity between the droplet and stagnating air. It is shown that the solution of the steady-state psychrometric equation provides evaporation rates which are the maximum possible when droplets are entrained in air moving along stagnation lines under such conditions. Calculations are made for a wide variety of water droplet diameters, ambient conditions, and flight Mach numbers. Droplet diameter, body size, and Mach number effects are found to predominate, whereas wide variation in ambient conditions are of relatively small significance in the determination of evaporation rates. The results are essentially exact for the case of movement of droplets having diameters smaller than about 30 microns along relatively long ducts (length at least several feet) or toward large obstacles (wings), since disequilibrium effects are then of little significance. Mass losses in the case of movement within ducts will often be significant fractions (one-fifth to one-half) of original droplet masses, while very small droplets within ducts will often disappear even though the entraining air is not fully stagnated. Wing-approach evaporation losses will usually be of the order of several percent of original droplet masses. Two numerical examples are given of the determination of local evaporation rates and total mass losses in cases involving cloud droplets approaching circular cylinders along stagnation lines. The cylinders chosen were of 3.95-inch (10.0+ cm) diameter and 39.5-inch 100+ cm) diameter. The smaller is representative of icing-rate measurement cylinders, while with the larger will be associated an air-flow field similar to that ahead of an airfoil having a leading-edge radius comparable with that of the cylinder. It is found that the losses are less than 5 percent. It is concluded that such losses are, in general, very small (less than 1 percent) in the case of smaller obstacles (of icing-rate measurement- cylinder size); the motional dynamics are such, however, that exceptions will occur by reason of failure of very small droplets (moving along stagnation lines) to impinge upon obstacle surfaces. In such cases, the droplets will evaporate completely.

Lowell, H. H.↗

Satellite Microwave Radar Observations of Antarctic Sea Ice

Historical data on Antarctic sea ice extent and concentration have traditionally been derived from visible and near-infrared images acquired by the polar-orbiting National Oceanic and Atmospheric Agency's (NOAA) meteorological satellites, using the Advanced Very High Resolution Radiometer (AVHRR), and more recently by the Defense Meteorological Satellite Program's Operational Linescan System (OLS). The limitation of these systems is that the majority of energy imparted to the Antarctic sea-ice system is transferred during b6y fast-moving low pressure systems. Since the Southern Ocean sea-ice cover is completely bounded at its lower latitude limit by open ocean, these "polar lows" transport large amounts of moisture (contained in warm air masses) over the outer ice cover. The result is that most, if not all, noteworthy periods of wind- and temperature-driven dynamic changes in the ice cover are accompanied by periods where the region is blanketed by cloud, and when the atmosphere is inherently more electromagnetically opaque. During storms, the probability with which the area is cloud covered is extremely high, thereby ruling out use of visible or near-infrared images as a practical method of monitoring the associated changes in ice conditions. Instead, Nimbus-7 Scanning Multichannel Microwave Radiometer (SMMR) and DMSP Special Sensor Microwave/imager (SSM/I) have been the primary workhorses to build up a microwave record of Antarctic sea-ice characteristics. Similar problems, however, occur in passive microwave retrievals of sea-ice concentration, and the algorithms are called into question during these periods of change. The influence of water vapor in the atmosphere alone can modify the ice concentration retrievals by fractions exceeding 105, and that retrievals of ice concentration must compensate for the atmospheric water vapor and liquid water contents.

Drinkwater, Mark R.↗

Exploring the Inorganic Composition of the Asian Tropopause Aerosol Layer Using Medium-Duration Balloon Flights

Satellite observations have revealed an enhanced aerosol layer near the tropopause over Asia during the summer monsoon, called the “Asian Tropopause Aerosol Layer” (ATAL). In this work, aerosol particles in the ATAL were collected with a balloon-borne impactor near the tropopause region over India, using extended-duration balloon flights, in summer 2017 and winter 2018. The chemical composition of these particles was further investigated by quantitative analysis using offline ion chromatography. Nitrate (NO_3 ^1) and nitrite (NO_2 ^-) were found to be the dominant ions in the collected aerosols with values ranging between 87 and 343 ng m^(−3) at STP (standard temperature and pressure) during the summer campaign. In contrast, sulfate (SO_4 ^(2-)) levels were found to be above the detection limit (>10 ng m^(−3) at STP) only in winter. In addition, we determined the origin of the air masses sampled during the flights using the analysis of back trajectories as well as a convective proxy from cloud-top temperature fields derived from a geostationary satellite. The results obtained from this analysis were put into the context of large-scale transport and aerosol distribution using GEOS-Chem chemical transport model simulations. The first flight in summer 2017 which sampled an air mass within the Asian monsoon anticyclone (AMA), influenced by convection over Western China, was associated with particle size diameters from 0.05 to 0.15 µm. In contrast, the second flight sampled air masses at the edge of the AMA associated with a larger particle size radius (>2 µm) with a higher NO_2 ^- concentration. The sampled air masses in winter 2018 were likely affected by smoke from the Pacific Northwest fire event in Canada, which occurred 7 months before our campaign, associated with concentration enhancements of SO_4 (^2-) and Ca^(2+). Overall, our results suggest that nitrogen-containing particles represent a large fraction of cloud-free and in-cloud aerosols populating the ATAL, which is partially in agreement with the results from aircraft measurements during the StratoClim (Stratospheric and upper tropospheric processes for better climate predictions) campaign. The exact nature of those particles is still unknown, but their coincidences with subvisible cirrus clouds and their sizes suggest nitric acid trihydrate (NAT) as a possible candidate, as NAT has already been observed in the tropical upper troposphere and lower stratosphere in other studies. Furthermore, GEOS-Chem model simulations indicate that lightning NOx emissions could have significantly impacted the production of nitrate aerosols sampled during the summer of 2017.

Hazel Vernier↗

Possible Mechanisms for Turbofan Engine Ice Crystal Icing at High Altitude

A thermodynamic model is presented to describe possible mechanisms of ice formation on unheated surfaces inside a turbofan engine compression system from fully glaciated ice crystal clouds often formed at high altitude near deep convective weather systems. It is shown from the analysis that generally there could be two distinct types of ice formation: (1) when the "surface freezing fraction" is in the range of 0 to 1, dominated by the freezing of water melt from fully or partially melted ice crystals, the ice structure is formed from accretion with strong adhesion to the surface, and (2) when the "surface melting fraction" is the range of 0 to 1, dominated by the further melting of ice crystals, the ice structure is formed from accumulation of un-melted ice crystals with relatively weak bonding to the surface. The model captures important qualitative trends of the fundamental ice-crystal icing phenomenon reported earlier1,2 from the research collaboration work by NASA and the National Research Council (NRC) of Canada. Further, preliminary analysis of test data from the 2013 full scale turbofan engine ice crystal icing test3 conducted in the NASA Glenn Propulsion Systems Laboratory (PSL) has also suggested that (1) both types of ice formation occurred during the test, and (2) the model has captured some important qualitative trend of turning on (or off) the ice crystal ice formation process in the tested engine low pressure compressor (LPC) targeted area under different icing conditions that ultimately would lead to (or suppress) an engine core roll back (RB) event.

Crystal Icing↗

The Radiative Consistency of Atmospheric Infrared Sounder and Moderate Resolution Imaging Spectroradiometer Cloud Retrievals

The consistency of cloud top temperature (Tc) and effective cloud fraction (f) retrieved by the Atmospheric Infrared Sounder (AIRS)/Advanced Microwave Sounding Unit (AMSU) observation suite and the Moderate Resolution Imaging Spectroradiometer (MODIS) on the EOS-Aqua platform are investigated. Collocated AIRS and MODIS TC and f are compared via an 'effective scene brightness temperature' (Tb,e). Tb,e is calculated with partial field of view (FOV) contributions from TC and surface temperature (TS), weighted by f and 1-f, respectively. AIRS reports up to two cloud layers while MODIS reports up to one. However, MODIS reports TC, TS, and f at a higher spatial resolution than AIRS. As a result, pixel-scale comparisons of TC and f are difficult to interpret, demonstrating the need for alternatives such as Tb,e. AIRS-MODIS Tb,e differences ((Delta)Tb,e) for identical observing scenes are useful as a diagnostic for cloud quantity comparisons. The smallest values of DTb,e are for high and opaque clouds, with increasing scatter in (Delta)Tb,e for clouds of smaller opacity and lower altitude. A persistent positive bias in DTb,e is observed in warmer and low-latitude scenes, characterized by a mixture of MODIS CO2 slicing and 11-mm window retrievals. These scenes contain heterogeneous cloud cover, including mixtures of multilayered cloudiness and misplaced MODIS cloud top pressure. The spatial patterns of (Delta)Tb,e are systematic and do not correlate well with collocated AIRS-MODIS radiance differences, which are more random in nature and smaller in magnitude than (Delta)Tb,e. This suggests that the observed inconsistencies in AIRS and MODIS cloud fields are dominated by retrieval algorithm differences, instead of differences in the observed radiances. The results presented here have implications for the validation of cloudy satellite retrieval algorithms, and use of cloud products in quantitative analyses.

clouds↗

Possible Mechanisms for Turbofan Engine Ice Crystal Icing at High Altitude

A thermodynamic model is presented to describe possible mechanisms of ice formation on unheated surfaces inside a turbofan engine compression system from fully glaciated ice crystal clouds often formed at high altitude near deep convective weather systems. It is shown from the analysis that generally there could be two distinct types of ice formation: (1) when the "surface freezing fraction" is in the range of 0 to 1, dominated by the freezing of water melt from fully or partially melted ice crystals, the ice structure is formed from accretion with strong adhesion to the surface, and (2) when the "surface melting fraction" is the range of 0 to 1, dominated by the further melting of ice crystals, the ice structure is formed from accumulation of un-melted ice crystals with relatively weak bonding to the surface. The model captures important qualitative trends of the fundamental ice-crystal icing phenomenon reported earlier (Refs. 1 and 2) from the research collaboration work by NASA and the National Research Council (NRC) of Canada. Further, preliminary analysis of test data from the 2013 full scale turbofan engine ice crystal icing test (Ref. 3) conducted in the NASA Glenn Propulsion Systems Laboratory (PSL) has also suggested that (1) both types of ice formation occurred during the test, and (2) the model has captured some important qualitative trend of turning on (or off) the ice crystal ice formation process in the tested engine low pressure compressor (LPC) targeted area under different icing conditions that ultimately would lead to (or suppress) an engine core roll back (RB) event.

Crystal Icing↗

Evaluation of Clouds, Radiation, and Precipitation in CMIP6 Models Using Global Weather States Derived from ISCCP-H Cloud Property Data

A clustering methodology is applied to cloud optical depth cloud top pressure (TAU-PC) histograms from the new, 1-degree resolution, ISCCP-H dataset, to derive an updated global Weather State (WS) dataset. Then, PC-TAU histograms from current-climate CMIP6 model simulations are assigned to the ISCCP-H WSs along with their concurrent radiation and precipitation properties, to evaluate model cloud, radiation, and precipitation properties in the context of the Weather States. The new ISCCP-H analysis produces WSs that are very similar to those previously found in the lower resolution ISCCP-D dataset. The main difference lies in the splitting of the ISCCP-D thin stratocumulus WS between the ISCCP-H shallow cumulus and stratocumulus WSs, which results in the reduction by one of the total WS number. The evaluation of the CMIP6 models against the ISCCP-H Weather States, shows that, in the ensemble mean, the models are producing an adequate representation of the frequency and geographical distribution of the WSs, with measurable improvements compared to the WSs derived for the CMIP5 ensemble. However, the frequency of shallow cumulus clouds continues to be underestimated, and, in some WSs the good agreement of the ensemble mean with observations comes from averaging models that significantly overpredict and underpredict the ISCCP-H WS frequency. In addition, significant biases exist in the internal cloud properties of the model WSs, such as the model underestimation of cloud fraction in middle-top clouds and secondarily in midlatitude storm and stratocumulus clouds, that result in an underestimation of cloud SW cooling in those regimes.

Clouds↗

Lessons from Earth Aerobiology for Venus Astrobiology

Venus’s clouds have often suggested as a possible habitat. The constraints governing putative airborne life in such a habitat in turn inform priorities and strategies for remote and in situ exploration, methods by which resulting biosignatures might be detected, exoplanet habitability assessment, and planetary protection concerns. Lessons drawn from studying Earth’s aerobiosphere can help improve this understanding. There are altitude ranges within Venus’s clouds in which temperature, pressure, particle size, and radiation appear to be within the limits of microbial life on Earth, and life cycles involving S- and Fe-based redox metabolism have been proposed. However, given the lack of a habitable surface reservoir, a long-term stable Venus aerobiosphere would require that the reproduction rate of the airborne microbes be faster than the settling rate of airborne microbes due to gravity, or eventually the population would be depleted; put another way, the mean generation time would need to exceed the mean residence time. This creates a joint constraint of aerosol dynamics, potential nutrient availability and energy influx, and bioenergetic costs such as desiccation and radiation damage. Even at an optimistic estimate of 75% H2SO4, Venus aerosol water activity (aw) is still ~0.02, far below the observed microbial growth limit of ~0.6. Long-term desiccation with brief spurts of repair and growth in response to transient water influx, such as from volcanism, is the most likely model for Earth-like life on Venus – a ‘desert bloom’ scenario. Several high-priority science goals – cloud aerosol composition, internal radiative flux, and aerosol residence time and circulation models – thus will also improve our understanding of Venus in an astrobiology context. In Earth’s troposphere, warm water clouds can carry 103 – 105 cells/mL, some metabolically active. However, Earth’s stratospheric sulfate aerosol layer may be a better analogue: supercooled sulfuric acidaerosols (acid weight fraction 0.6 – 0.85, 0.1 – 1 μm diameter, 0.1 – 1 cm-3) with little water activity, long residence times, high UV radiation, and only sporadic influx from surface particle sources. Though ‘hot spots’ can occur associated with tropospheric mixing, viable cells in stratospheric samples are rare (~102 cells/m3), and primarily inactive forms such as spores. It is not yet clear whether such bioaerosols are associated with sulfate aerosols or simply co-located, and reproduction in situ has not yet been observed. In this model of a sparse, largely dormant Venus ecosystem, a single transect on descent is likely to pass through a low-water, inactive region, missing potential signs of habitability or biosignatures. A targeted strategy would sample through an aerial region with some upwelling from surface sources, andtake multiple transects separated in time and space. This is compatible with other in situ science goals seeking to understand the dynamics and heterogeneities of Venus’s clouds.

Lower atmosphere↗

Solar system formation and the distribution of volatile species

To understand how the solar system formed we must understand the compositional distribution of the current system. Volatile species are particularly important in that their stability as condensed phases is limited in temperature-pressure space, and hence variations in their distribution at present potentially contain an imprint of processes by which temperature and pressure varied in the solar nebula. In this talk we restrict ourselves to species more volatile than water ice, and address issues related to processes in the outer solar system and the formation of bodies there; others in this conference will cover volatile species relevant to inner solar system processes. Study of the outer solar system is relevant both to understanding the interface between the solar nebula and the progenitor giant molecular cloud (since the chemical links to present-day observables in molecular clouds are species like methane, carbon monoxide, etc.), as well as the origin of terrestrial planet atmospheres and oceans (the latter to be covered by Owen). The wealth of compositional information on outer solar system bodies which has become available from spacecraft and ground-based observations challenges traditional simplistic views of the composition and hence dynamics of the solar nebula. The basic assumption of thermochemical equilibrium, promulgated in the 1950's, in which methane and ammonia dominate nitrogen- and carbon-bearing species, is demonstrably incorrect on both observational and theoretical grounds. However, the kinetic inhibition model which replaced it, in which carbon monoxide and molecular nitrogen dominate a nebula which is fully mixed and hence cycles outer solar system gases through a hot, chemically active zone near the disk center, is not supported either by observations. Instead, a picture of the outer solar system emerges in which the gas and grains are a mixture of relatively unaltered, or modestly altered, molecular cloud material, along with a fraction which has been chemically altered in the solar nebula itself (and perhaps giant planet nebulae).

Lunine, Jonathan I.↗

A coarse-grained model of clay colloidal aggregation and consolidation with explicit representation of the electrical double layer

The aggregation of clay minerals in liquid water exemplifies colloidal self-assembly in nature. These negatively charged aluminosilicate platelets interact through multiple mechanisms with different sensitivities to particle shape, surface charge, aqueous chemistry, and interparticle distance and exhibit complex aggregation structures. Experiments have difficulty resolving the associated colloidal assemblages at the scale of individual particles. Conversely, all-atom molecular dynamics (MD) simulations provide detailed insight on clay colloidal interaction mechanisms, but they are limited to systems containing a few particles. We develop a new coarse-grained (CG) model capable of representing assemblages of hundreds of clay particles with accuracy approaching that of MD simulations, at a fraction of the computational cost. Our CG model is parameterized based on MD simulations of a pair of smectite clay particles in liquid water. A distinctive feature of our model is that it explicitly represents the electrical double layer (EDL), i.e., the cloud of charge-compensating cations that surrounds the clay particles. Our model captures the simultaneous importance of long-range colloidal interactions (i.e., interactions consistent with simplified analytical models, already included in extant clay CG models) and short-range interactions such as ion correlation and surface and ion hydration effects. The resulting simulations correctly predict, at low solid-water ratios, the existence of ordered arrangements of parallel particles separated by water films with a thickness up to ~10 nm and, at high solid-water ratios, the coexistence of crystalline and osmotic swelling states, in agreement with experimental observations.

54 ENVIRONMENTAL SCIENCES↗