Search NASA⌕ Search

SEARCH · Search NASA

Results for “colloid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Colloidal metal transport in soils developing on historic coal mine spoil

Chemical weathering of pyrite via oxidative dissolution is well-known for generating Fe(III)-bearing colloids at acid mine drainage (AMD) sites; however, the potential for physical weathering of pyrite-bearing materials and subsequent release and transport of colloidal pyrite and associated trace metals has not been studied. Here, we monitored the colloidal metal transport in soil developing on abandoned coal mine spoil with a history of AMD generation to systematically study the contribution of colloids to base and trace metal transport and determine the elemental and mineralogical composition of colloids. Additionally, we collected soil pore water using lysimeters with a pore size of approximately 1.3 μm and centrifugation was used to separate the colloids from aqueous fractions. Metal concentrations of Na, Ca, Mg, K, Si, Al, Mn, Fe, Cu, and Zn were analyzed. Our results show only 14% of the total Al and Cu were present in colloidal fractions whereas 23%, 43%, and 54% of Fe, Mn, and Zn were transported in the colloidal phase, respectively. In contrast, all base metals were primarily present in the aqueous concentration with a small fraction (<10%) present in the colloidal phase. The colloidal fractions of the base metals were inferred to be associated with the concentration of clay colloids. The release of colloids exhibited possible sensitivity toward weather conditions such as alternating high temperatures and rainfall during summer (May–July) compared to fall (August–November). The morphology, elemental, and mineral composition of colloids were determined by a scanning electron microscopy equipped with energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD). Colloids were dominated by phyllosilicates (biotite, muscovite, and kaolinite) with minor quartz and feldspars. Other minerals phases identified in colloidal fractions were hematite, goethite, arsenopyrite, and chalcopyrite. Colloids consisting of Fe, S, and O with structures resembling framboidal pyrite were identified, which is consistent with the non-silicates minerals identified by XRD. Our study suggests that the physical weathering of pyrite in the mine spoil can generate colloidal pyrite, which is mobilized and transported by soil pore water. Our results also indicate that these pyritic colloids are associated with toxic trace metals including Cu, Mn, and Zn. Colloid mobilization is also impacted by changes in temperature and precipitation, where clay mobilization afer rain events is favored. Further, sudden spikes in aqueous and/or colloidal concentrations may be the result of local heterogeneity within soils developing on mine spoil, indicating that further field-based work is necessary to better characterize pore-scale processes that control aqueous and colloid transport at similar sites to have a better understanding of potential contaminant transport from mine spoil systems.

58 GEOSCIENCES↗

Natural colloids facilitated transport of steroidal estrogens in saturated porous media: Mechanism and processes

Steroid estrogens (SEs) are widely distributed in terrestrial environment, whilst the transport of SEs in groundwater is not well understood. Specifically, the effects of ubiquitous natural colloids on the SEs transport are unclear. Here, the influence of inorganic colloids (i.e. silica and illite) and organic colloids, i.e. Humic acid (HA), on the transport of estrone (E1) and estradiol (E2) in saturated porous media were studied in laboratory scale column experiments. Characterization on the colloids and the column packing material was conducted to provide bases for the interpretation of column test findings. Results showed that the transport of SEs was facilitated by the nature colloids that were migrating through the saturated porous media. About 38.5% of E1 and 24.6% of E2 were retained in the column when colloids were absent in the system. Further, when transporting with silica colloids, illite colloids, and HA colloids, the transport of E1 was enhanced by 15.64%, 11.17%, and 25.60%, respectively; whilst the transport of E2 was improved by 19.56%, 23.06%, and 36.40%, respectively. The colloids’ SEs transport enhancement depended not only on the mobility of the colloids but also on their geochemical characteristics. The tested organic colloids showed 1.5-2.5 times greater ability on promoting the transport of SEs than the inorganic ones. The proposed mechanisms of nature colloids facilitated transport of SEs include competing for adsorption sites on the sand surfaces by the colloids resulting mobilization of adsorbed SEs from solid matrix, and transport of colloids as carriers for SEs.

54 ENVIRONMENTAL SCIENCES↗

Experimental evidence of colloids and nanoparticles presence from 25 waste leachates

Highlights: • This work is the first assessment of colloids in waste leachates. • Analytical methods are proposed and discussed. • All the waste have at least one element in colloidal form, and some elements are always colloidal. • Man-made nanoparticles are observed. • It can change the interpretation of leachate elemental concentration. - Abstract: The potential colloids release from a large panel of 25 solid industrial and municipal waste leachates, contaminated soil, contaminated sediments and landfill leachates was studied. Standardized leaching, cascade filtrations and measurement of element concentrations in the microfiltrate (MF) and ultrafiltrate (UF) fraction were used to easily detect colloids potentially released by waste. Precautions against CO{sub 2} capture by alkaline leachates, or bacterial re-growth in leachates from wastes containing organic matter should be taken. Most of the colloidal particles were visible by transmission electron microscopy with energy dispersion spectrometry (TEM–EDS) if their elemental MF concentration is greater than 200 μg l{sup −1}. If the samples are dried during the preparation for microscopy, neoformation of particles can occur from the soluble part of the element. Size distribution analysis measured by photon correlation spectroscopy (PCS) were frequently unvalid, particularly due to polydispersity and/or too low concentrations in the leachates. A low sensitivity device is required, and further improvement is desirable in that field. For some waste leachates, particles had a zeta potential strong enough to remain in suspension. Mn, As, Co, Pb, Sn, Zn had always a colloidal form (MF concentration/UF concentration > 1.5) and total organic carbon (TOC), Fe, P, Ba, Cr, Cu, Ni are partly colloidal for more than half of the samples). Nearly all the micro-pollutants (As, Ba, Co, Cr, Cu, Mo, Ni, Pb, Sb, Sn, V and Zn) were found at least once in colloidal form greater than 100 μg l{sup −1}. In particular, the colloidal forms of Zn were always by far more concentrated than its dissolved form. The TEM–EDS method showed various particles, including manufactured nanoparticles (organic polymer, TiO{sub 2}, particles with Sr, La, Ce, Nd). All the waste had at least one element detected as colloidal. The solid waste leachates contained significant amount of colloids different in elemental composition from natural ones. The majority of the elements were in colloidal form for wastes of packaging (3), a steel slag, a sludge from hydrometallurgy, composts (2), a dredged sediment (#18), an As contaminated soil and two active landfill leachates. These results showed that cascade filtration and ICP elemental analysis seems valid methods in this field, and that electronic microscopy with elemental detection allows to identify particles. Particles can be formed from dissolved elements during TEM sample preparation and cross-checking with MF and UF composition by ICP is useful. The colloidal fraction of leachate of waste seems to be a significant source term, and should be taken into account in studies of emission and transfer of contaminants in the environment. Standardized cross-filtration method could be amended for the presence of colloids in waste leachates.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

MOBILIZATION AND CHARACTERIZATION OF COLLOIDS GENERATED FROM CEMENT LEACHATES MOVING THROUGH A SRS SANDY SEDIMENT

Naturally occurring mobile colloids are ubiquitous and are involved in many important processes in the subsurface zone. For example, colloid generation and subsequent mobilization represent a possible mechanism for the transport of contaminants including radionuclides in the subsurface environments. For colloid-facilitated transport to be significant, three criteria must be met: (1) colloids must be generated; (2) contaminants must associate with the colloids preferentially to the immobile solid phase (aquifer); and (3) colloids must be transported through the groundwater or in subsurface environments - once these colloids start moving they become 'mobile colloids'. Although some experimental investigations of particle release in natural porous media have been conducted, the detailed mechanisms of release and re-deposition of colloidal particles within natural porous media are poorly understood. Even though this vector of transport is known, the extent of its importance is not known yet. Colloid-facilitated transport of trace radionuclides has been observed in the field, thus demonstrating a possible radiological risk associated with the colloids. The objective of this study was to determine if cementitious leachate would promote the in situ mobilization of natural colloidal particles from a SRS sandy sediment. The intent was to determine whether cementitious surface or subsurface structure would create plumes that could produce conditions conducive to sediment dispersion and mobile colloid generation. Column studies were conducted and the cation chemistries of influents and effluents were analyzed by ICP-OES, while the mobilized colloids were characterized using XRD, SEM, EDX, PSD and Zeta potential. The mobilization mechanisms of colloids in a SRS sandy sediment by cement leachates were studied.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Chancellor Water Colloids: Characterization and Radionuclide Associated Transport

Column transport experiments were conducted in which water from the Chancellor nuclear test cavity was transported through crushed volcanic tuff from Pahute Mesa. In one experiment, the cavity water was spiked with solute 137 Cs, and in another it was spiked with 239/240Pu (IV) nanocolloids. A third column experiment was conducted with no radionuclide spike at all, although the 137 Cs concentrations in the water were still high enough to quantify in the column effluent. The radionuclides strongly partitioned to natural colloids present in the water, which were characterized for size distribution, mass concentration, zeta potential/surface charge, critical coagulation concentration, and qualitative mineralogy. In the spiked water experiments, the unanalyzed portion of the high-concentration column effluent samples were combined and re-injected into the respective columns as a second pulse. This procedure was repeated again for a third injection. Measurable filtration of the colloids was observed after each initial injection of the Chancellor water into the columns, but the subsequent injections (spiked water experiments only) exhibited no apparent filtration, suggesting that the colloids that remained mobile after relatively short transport distances were more resistant to filtration than the initial population of colloids. It was also observed that while significant desorption of 137 Cs from the colloids occurred after the first injection in both the spiked and unspiked waters, subsequent injections of the spiked water exhibited much less 137 Cs desorption (much greater 137 Cs colloid-associated transport). This result suggests that the 137 Cs that remained associated with colloids during the first injection represented a fraction that was more strongly adsorbed to the mobile colloids than the initial 137 Cs associated with the colloids. A greater amount of the 239/240 Pu desorbed from the colloids during the second column injection compared to the first injection, but then desorption decreased significantly in the third injection. This result suggests that the Pu(IV) nanocolloids probably at least partially dissolved during and after the first injection, resulting in enhanced desorption from the colloids during the second injection, but by the third injection the Pu started following the same trend that was observed for 137 Cs. The experiments suggest a transport scale dependence in which mobile colloids and colloid-associated radionuclides observed at downstream points along a flow path have a greater tendency to remain mobile along the flow path than colloids and radionuclides observed at upstream points. This type of scale dependence may help explain observations of colloid-facilitated Pu transport over distances of up to 2 km at Pahute Mesa.

54 ENVIRONMENTAL SCIENCES↗

Colloid-Facilitated Actinide Transport in a Cementitious-Impacted SRS Groundwater

The objective of this report is to provide a literature review relevant to the question of whether colloid facilitated transport of plutonium is enhanced in a cementitious groundwater system on the Savannah River Site (SRS). Contaminant transport is commonly described as taking place in a system with a mobile aqueous phase and an immobile solid phase. There has been an increasing awareness of a third phase, a mobile solid phase, also referred to as a mobile colloidal phase. Mobile colloids consist of organic and/or inorganic submicron-particles that move with groundwater flow. When radionuclides are associated with the mobile colloids, the net effect is that radionuclides can move faster through the subsurface system than would be predicted by transport models that do not include mobile colloids. It is important to distinguish between subsurface colloids and subsurface mobile colloids. The subsurface environment includes an enormous reservoir of colloids, but only a tiny fraction, if any, are mobile. Mobile colloid formation is commonly described as involving a three-step process: genesis, stabilization, and transport. It was concluded that there is a strong likelihood that submicron colloids of plutonium exist near the source term, (i.e., the genesis step is likely completed). While such particles have not been directly detected, it is highly likely that plutonium could either attach to submicron particles in the sediment or that submicron plutonium fragments exist at the source. However, the tendency for these plutonium colloids to move in the SRS subsurface is extremely low, especially in engineered cementitious environments where the ionic strength of the solution and the elevated concentrations of divalent cations greatly curtails colloid suspension stability (i.e., the stabilization step is likely not completed). Together these data strongly indicate that plutonium-bearing colloids would likely exist in the near field of a tank closure facility, but the colloids would be unlikely to be mobile, thereby providing a vector for enhanced transport. Under cementitious leachate impacted groundwater conditions, it is reasonable to assume plutonium transport occurs primarily as a two-phase system, a mobile aqueous phase and an immobile solid phase.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Colloid-Facilitated Transport of Cations in an Unsaturated Fractured Soil Under Transient Conditions

Rainfall experiments were conducted using intact soil cores and an instrumented soil pedon to examine the effect of physical heterogeneity and rainfall characteristics on the mobilization of colloids, organic matter, cesium, and strontium in a fractured soil. To measure the spatial variability of infiltration of colloids and contaminants, samples were collected through a 19-port grid placed below the soil core in laboratory study and in 27 samplers at multiple depths in the soil pedon in the field study. Cesium and strontium were applied to the soil cores and the soil pedon prior to mobilization experiments. Rainwater solutions of multiple ionic strengths and organic matter concentrations were applied to the soil cores and soil pedon to mobilize in situ colloids, cesium, and strontium. The mobilization of colloids and metal cations occurred through preferential flow paths in the soil cores. Compared to steady rainfall, greater amounts of colloids were mobilized during rainfall interrupted by pauses, which indicates that the supply of colloids to be mobilized was replenished during the pauses. A maximum in the amount of mobilized colloids were mobilized during a rainfall following a pause of 2.5 d. Pauses of shorter or longer duration resulted in less colloid mobilization. Freeze-thaw cycles, a transient condition in winter, enhanced colloid mobilization and colloid-facilitated transport of cesium and strontium in the soil cores. The exchange of solutes between the soil matrix and macropores caused a hysteretic mobilization of colloids, cesium, and strontium during changes in ionic strength. Colloid-facilitated mobilization of cesium and strontium was important at low ionic strength in fractures where slow flow allowed greater exchange of flow between the fractures and the surrounding matrix. The release of cesium and strontium by cation exchange occurred at high ionic strength in fractures where there is a little exchange of pore water with the surrounding matrix. The results of the field experiment suggested that ion exchange, and not organic matter- or colloid-facilitated transport, was the dominant mechanism for mobilization of cesium and strontium through the macropores of the fractured soil.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Laboratory investigation of the role of desorption kinetics on americium transport associated with bentonite colloids

Understanding the parameters that control colloid-mediated transport of radionuclides is important for the safe disposal of used nuclear fuel. We report an experimental and reactive transport modeling examination of americium transport in a groundwater–bentonite–fracture fill material system. A series of batch sorption and column transport experiments were conducted to determine the role of desorption kinetics from bentonite colloids in the transport of americium through fracture materials. We used fracture fill material from a shear zone in altered granodiorite collected from the Grimsel Test Site (GTS) in Switzerland and colloidal suspensions generated from FEBEX bentonite, a potential repository backfill material. The colloidal suspension (100 mg L –1 ) was prepared in synthetic groundwater that matched the natural water chemistry at GTS and was spiked with 5.5 × 10 –10 M 241 Am. Batch characterizations indicated that 97% of the americium in the stock suspension was adsorbed to the colloids. Breakthrough experiments conducted by injecting the americium colloidal suspension through three identical columns in series, each with mean residence times of 6 h, show that more than 95% of the bentonite colloids were transported through each of the columns, with modeled colloid filtration rates (k f ) of 0.01–0.02 h –1 . Am recoveries in each column were 55–60%, and Am desorption rate constants from the colloids, determined from 1-D transport modeling, were 0.96, 0.98, and 0.91 h –1 in the three columns, respectively. The consistency in Am recoveries and desorption rate constants in each column indicates that the Am was not associated with binding sites of widely-varying strengths on the colloids, as one binding site with fast kinetics represented the system accurately for all three sequential columns. As a result, our data suggest that colloid-mediated transport of Am in a bentonite-fracture fill material system is unlikely to result in transport over long distance scales because of the ability of the fracture materials to rapidly strip Am from the bentonite colloids and the apparent lack of a strong binding site that would keep a fraction of the Am strongly-associated with the colloids.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Does Water Content or Flow Rate Control Colloid Transport in Unsaturated Porous Media?

Mobile colloids can play an important role in contaminant transport in soils: many contaminants exist in colloidal form, and colloids can facilitate transport of otherwise immobile contaminants. In unsaturated soils, colloid transport is, among other factors, affected by water content and flow rate. Our objective was to determine whether water content or flow rate is more important for colloid transport. We passed negatively charged polystyrene colloids (220 nm diameter) through unsaturated sand-filled columns under steady-state flow at different water contents (effective water saturations Se ranging from 0.1 to 1.0, with Se = (? – ?r)/(?s – ?r)) and flow rates (pore water velocities v of 5 and 10 cm/min). Water content was the dominant factor in our experiments. Colloid transport decreased with decreasing water content, and below a critical water content (Se < 0.1), colloid transport was inhibited, and colloids were strained in water films. Pendular ring and water film thickness calculations indicated that colloids can move only when pendular rings are interconnected. The flow rate affected retention of colloids in the secondary energy minimum, with less colloids being trapped when the flow rate increased. These results confirm the importance of both water content and flow rate for colloid transport in unsaturated porous media and highlight the dominant role of water content.

99 GENERAL AND MISCELLANEOUS↗

Chancellor Water Colloids: Characterization and Radionuclide Association

Concluding remarks about this paper are: (1) Gravitational settling, zeta potential, and ultrafiltration data indicate the existence of a colloidal phase of both the alpha and beta emitters in the Chancellor water; (2) The low activity combined with high dispersion homogeneity of the Chancellor water indicate that both alpha and beta emitters are not intrinsic colloids; (3) Radionuclides in the Chancellor water, particularly Pu, coexist as dissolved aqueous and sorbed phases - in other words the radionuclides are partitioned between the aqueous phase and the colloidal phase; (4) The presence of Pu as a dissolved species in the aqueous phase, suggests the possibility of Pu in the (V) oxidation state - this conclusion is supported by the similarity of the k d value of Pu determined in the current study to that determined for Pu(V) sorbed onto smectite colloids, and the similar electrokinetic behavior of the Chancellor water colloids to smectite colloids; (5) About 50% of the Pu(V) is in the aqueous phase and 50% is sorbed on colloids (mass concentration of colloids in the Chancellor water is 0.12 g/L); (6) The k d of the Pu and the beta emitters (fission products) between aqueous and colloidal phases in the Chancellor water is ~8.0 x 10 3 mL/g using two different activity measurement techniques (LSC and alpha spectroscopy); (7) The gravitational settling and size distributions of the association colloids indicate that the properties (at least the physical ones) of the colloids to which the alpha emitters are associated with seem to be different that the properties of the colloids to which the beta emitters are associated with - the beta emitters are associated with very small particles (~50 - 120 nm), while the alpha emitters are associated with relatively larger particles; and (8) The Chancellor water colloids are extremely stable under the natural pH and ionic strength conditions, indicating high potential for transport in the subsurface.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Organized assemblies of colloids formed at the poles of micrometer-sized droplets of liquid crystal

We report on the formation of organized assemblies of 1 μm-in-diameter colloids (polystyrene (PS)) at the poles of water-dispersed droplets (diameters 7–20 μm) of nematic liquid crystal (LC). For 4-cyano-4'-pentylbiphenyl droplets decorated with two to five PS colloids, we found 32 distinct arrangements of the colloids to form at the boojums of bipolar droplet configurations. Significantly, all but one of these configurations (a ring comprised of five PS colloids) could be mapped onto a local (non-close packed) hexagonal lattice. To provide insight into the origin of the hexagonal lattice, we investigated planar aqueous-LC interfaces, and found that organized assemblies of PS colloids did not form at these interfaces. Experiments involving the addition of salts revealed that a repulsive interaction of electrostatic origin prevented formation of assemblies at planar interfaces, and that regions of high splay near the poles of the LC droplets generated cohesive interactions between colloids that could overcome the repulsion. Support for this interpretation was obtained from a model that included (i) a long-range attraction between adsorbed colloids and the boojum due to the increasing rate of strain (splay) of LC near the boojum (splay attraction), (ii) an attractive inter-colloid interaction that reflects the quadrupolar symmetry of the strain in the LC around the colloids, and (iii) electrostatic repulsion between colloids. The model predicts that electrostatic repulsion between colloids can lead to a ~1000k B T energy barrier at planar interfaces of LC films, and that the repulsive interaction can be overcome by splay attraction of the colloids to the boojums of the LC droplets. Overall, the results reported in this paper advance our understanding of the directed assembly of colloids at interfaces of LC droplets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Colloid Mobilization and Porous Media Permeability Changes by Dynamic Stress Stimulations

Laboratory experiments on porous rock cores have shown that seismic-band (100 Hz or less) mechanical stress/strain cycling of the rock matrix can mobilize sub-pore-size particles (colloids) trapped in the pore space and allow them to be expelled during steady-state water flow. This coupling of dynamic stress to colloid mobility is a potential key mechanism whereby seismic waves may alter formation permeability and porous mass transport in Earth's crust. Experiments where colloid suspensions were injected into Fontainebleau sandstone cores demonstrated that colloid size and the ionic strength of the suspending fluid are major parameters that will control the ability of the colloids to attach to pore walls or to form particle bridges at pore throats. Both effects can lead to significant changes in permeability. A unique core-holder apparatus that applies low-frequency mechanical stress/strain to 2.54-cm-diameter porous rock samples during constant-rate fluid flow was used for those experiments. Microsphere injection caused the core's permeability to decline due to colloid bridging at pore throats. It was found that dynamic stress at 25 to 50 Hz mobilized these trapped colloids mainly when the ionic strength is low, and thereby partially restored the permeability of the sample. These earlier experiments on natural rocks were difficult to interpret in terms of how the colloids distributed themselves throughout the heterogeneous pore space and what interactions were occurring between the colloids and the solid matrix. Observed permeability changes appeared to be confined to the first 5-10 cm of the rock where the colloids were injected, yet significant transport of colloids was observed along the entire length of the sample. The 'natural rock' system is too complex geometrically at the pore scale to allow quantification of mass transport properties along its entire length. To remedy this problem, new colloid transport experiments were performed with a synthetic glass-bead pack. Unconsolidated 1-mm-diameter borosilicate beads were packed into a confining sleeve to a length of 30 cm. Sufficient radial and axial confinement pressures were applied to the sleeve to create a fluid seal and to introduce rigidity to the sample. Suspensions of 2-um polystyrene micro spheres in deionized water were injected into the bead pack while maintaining constant flow through the sample. Sample permeability and effluent microsphere production were measured before, during, and after low-frequency stress cycling, as in the previous experiments on rocks. Results of these dynamic stress mobilization experiments will be presented.

54 ENVIRONMENTAL SCIENCES↗

Binary Colloidal Alloy Test Conducted on Mir

Colloids are tiny (submicron) particles suspended in fluid. Paint, ink, and milk are examples of colloids found in everyday life. The Binary Colloidal Alloy Test (BCAT) is part of an extensive series of experiments planned to investigate the fundamental properties of colloids so that scientists can make colloids more useful for technological applications. Some of the colloids studied in BCAT are made of two different sized particles (binary colloidal alloys) that are very tiny, uniform plastic spheres. Under the proper conditions, these colloids can arrange themselves in a pattern to form crystals. These crystals may form the basis of new classes of light switches, displays, and optical devices. Windows made of liquid crystals are already in the marketplace. These windows change their appearance from transparent to opaque when a weak electric current is applied. In the future, if the colloidal crystals can be made to control the passage of light through them, such products could be made much more cheaply. These experiments require the microgravity environment of space because good quality crystals are difficult to produce on Earth because of sedimentation and convection in the fluid. The BCAT experiment hardware included two separate modules for two different experiments. The "Slow Growth" hardware consisted of a 35-mm camera with a 250- exposure photo film cartridge. The camera was aimed toward the sample module, which contained 10 separate colloid samples. A rack of small lights provided backlighting for the photographs. The BCAT hardware was launched on the shuttle and was operated aboard the Russian space station Mir by American astronauts John Blaha and David Wolf (launched September 1996 and returned January 1997; reflown September 1997 and returned January 1998). To begin the experiment, one of these astronauts would mix the samples to disperse the colloidal particles and break up any crystals that might have already formed. Once the samples were mixed and the experiment was powered on, the hardware operated autonomously, taking photos of the colloidal samples over a 90-day period.

Hoffmann, Monica I.↗

Colloid-facilitated transport of 238 Pu, 233 U and 137 Cs through fractured chalk: Laboratory experiments, modelling, and implications for nuclear waste disposal

The influence of montmorillonite colloids on the mobility of 238 Pu, 233 U and 137 Cs through a chalk fracture was investigated to assess the transport potential for radioactive waste. Radioisotopes of each element, along with the conservative tracer tritium, were injected in the presence and absence of montmorillonite colloids into a naturally fractured chalk core. In parallel, batch experiments were conducted to obtain experimental sorption coefficients (K d , mL/g) for both montmorillonite colloids and the chalk fracture material. Breakthrough curves were modelled to determine diffusivity and sorption of each radionuclide to the chalk and the colloids under advective conditions. Uranium sorbed sparingly to chalk (log K d = 0.7 ± 0.2) in batch sorption experiments. 233 U(VI) breakthrough was controlled primarily by the matrix diffusion and sorption to chalk (15 and 25% recovery with and without colloids, respectively). Cesium, in contrast, sorbed strongly to both the montmorillonite colloids and chalk (batch log K d = 3.2 ± 0.01 and 3.9 ± 0.01, respectively). The high affinity to chalk and low colloid concentrations overwhelmed any colloidal Cs transport, resulting in very low 137 Cs breakthrough (1.1–5.5% mass recovery). Batch and fracture transport results, and the associated modelling revealed that Pu migrates both as Pu (IV) sorbed to montmorillonite colloids and as dissolved Pu(V) (7% recovery). Transport experiments revealed differences in Pu(IV) and Pu(V) transport behavior that could not be quantified in simple batch experiments but are critical to effectively predict transport behavior of redox-sensitive radionuclides. Finally, a brackish groundwater solution was injected after completion of the fracture flow experiments and resulted in remobilization and recovery of 2.2% of the total sorbed radionuclides which remained in the core from previous experiments. In general, our study demonstrates consistency in sorption behavior between batch and advective fracture transport. Finally, the results suggest that colloid-facilitated radionuclide transport will enhance radionuclide migration in fractured chalk for those radionuclides with exceedingly high affinity for colloids.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Tricoupled hybrid lattice Boltzmann model for nonisothermal drying of colloidal suspensions in micropore structures

A tricoupled hybrid lattice Boltzmann model (LBM) is developed to simulate colloidal liquid evaporation and colloidal particle deposition during the nonisothermal drying of colloidal suspensions in micropore structures. An entropic multiple-relaxation-time multirange pseudopotential two-phase LBM for isothermal interfacial flow is first coupled to an extended temperature equation for simulating nonisothermal liquid drying. Then the coupled model is further coupled with a modified convection diffusion equation to consider the nonisothermal drying of colloidal suspensions. Two drying examples are considered. First, drying of colloidal suspensions in a two-pillar micropore structure is simulated in two dimensions (2D), and the final configuration of colloidal particles is compared with the experimental one. Good agreement is observed. Second, at the temperature of 343.15 K ( 70&deg;C ), drying of colloidal suspensions in a complex spiral-shaped micropore structure containing 220 pillars is simulated (also in 2D). The drying pattern follows the designed spiral shape due to capillary pumping, i.e., transport of the liquid from larger pores to smaller ones by capillary pressure difference. Because the colloidal particles are passively carried with liquid, they accumulate at the small menisci as drying proceeds. As liquid evaporates at the small menisci, colloidal particles are deposited, eventually forming solid structures between the pillars (primarily), and at the base of the pillars (secondarily). As a result, the particle deposition conforms to the spiral route. Qualitatively, the simulated liquid and particle configurations agree well with the experimental ones during the entire drying process. Quantitatively, the model demonstrates that the evaporation rate and the particle accumulation rate slowly decrease during drying, similar to what is seen in the experimental results, which is due to the reduction of the liquid-vapor interfacial area. In conclusion, the hybrid model shows the capability and accuracy for simulating nonisothermal drying of colloidal suspensions in a complex micropore structure both qualitatively and quantitatively, as it includes all the required physics and captures all the complex features observed experimentally. Such a tricoupled LBM has a high potential to become an efficient numerical tool for further investigation of real and complex engineering problems incorporating drying of colloidal suspensions in porous media.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Temporal evolution of pore geometry, fluid flow, and solute transport resulting from colloid deposition

Deposition of colloidal particles is one of many processes that lead to the evolution of the structure of natural porous media in groundwater aquifers, oil reservoirs, and sediment beds. Understanding of the mechanisms and effects of this type of structural evolution has been limited by a lack of direct observations of pore structure. Here, synchrotron X-ray difference microtomography (XDMT) was used to resolve the temporal evolution of pore structure and the distribution of colloidal deposits within a granular porous medium. Column filtration experiments were performed to observe the deposition of relatively high concentrations of colloidal zirconia (200 mg/l of particles having diameter {approx}1 {micro}m) in a packed bed of glass beads (diameters 210-300 {micro}m). Noninvasive XDMT imaging of the pore structure was performed three separate times during each column experiment. The structural information observed at each time was used to define internal boundary conditions for three-dimensional lattice Boltzmann (LB) simulations that show how the evolving pore structure affects pore fluid flow and solute transport. While the total deposit mass increased continuously over time, colloid deposition was observed to be highly heterogeneous and local colloid detachment was observed at some locations in a low ionic strength medium. LB simulations indicated that particle accumulation greatly reduced the permeability of the porous medium while increasing the tortuosity. The colloidal deposits also increased the spatial variability in pore water velocities, leading to higher dispersion coefficients. Anomalous dispersion behavior was investigated by simulation at the scale of the experimental system: weak tailing was found in the clean bed case, and the extent of tailing greatly increased following colloid deposition because of the development of extensive no-flow regions. As a result of this coupling between pore fluid flow, colloid accumulation, and the pore geometry, colloid deposition is expected to strongly influence long-term solute dynamics in cases where solute transport is either accompanied by high colloid influx or where the passage of the solute front mobilizes and then redistributes material from the porous matrix.

54 ENVIRONMENTAL SCIENCES↗

Stable colloids in molten inorganic salts

A colloidal solution is a homogeneous dispersion of particles or droplets of one phase (solute) in a second, typically liquid, phase (solvent). Colloids are ubiquitous in biological, chemical and technological processes1, 2, homogenizing highly dissimilar constituents. To stabilize a colloidal system against coalescence and aggregation, the surface of each solute particle is engineered to impose repulsive forces strong enough to overpower van der Waals attraction and keep the particles separated from each other2. Electrostatic stabilization3, 4 of charged solutes works well in solvents with high dielectric constants, such as water (dielectric constant of 80). In contrast, colloidal stabilization in solvents with low polarity, such as hexane (dielectric constant of about 2), can be achieved by decorating the surface of each particle of the solute with molecules (surfactants) containing flexible, brush-like chains2, 5. Here we report a class of colloidal systems in which solute particles (including metals, semiconductors and magnetic materials) form stable colloids in various molten inorganic salts. The stability of such colloids cannot be explained by traditional electrostatic and steric mechanisms. Screening of many solute–solvent combinations shows that colloidal stability can be traced to the strength of chemical bonding at the solute–solvent interface. Theoretical analysis and molecular dynamics modelling suggest that a layer of surface-bound solvent ions produces long-ranged charge-density oscillations in the molten salt around solute particles, preventing their aggregation. Colloids composed of inorganic particles in inorganic melts offer opportunities for introducing colloidal techniques to solid-state science and engineering applications.

Zhang, Hao↗

Positioning colloids at the surfaces of cholesteric liquid crystal droplets

We report on the internal configurations of aqueous dispersions of droplets of cholesteric liquid crystals (LCs; 5–50 μm-in-diameter; comprised of 4-cyano-4'-pentylbiphenyl and 4-(1-methylheptyloxycarbonyl)phenyl-4-hexyloxybenzoate) and their influence on the positioning of surface-adsorbed colloids (0.2 or 1 μm-in-diameter polystyrene (PS)). When N = 2D/P was less than 4, where D is the droplet diameter and P is the cholesteric pitch, the droplets adopted a twisted bipolar structure (TBS) and colloids were observed to assume positions at either the poles or equator of the droplets. A statistical analysis of the distribution of locations of the colloids revealed a potential well of depth 2.7 k B T near the equator, a conclusion that was supported by computer simulations performed via the minimization of the Landau–de Gennes free energy (well depth of 7 k B T from simulation). In contrast, for N > 4, a majority of the droplets exhibited a radial spherical structure (RSS) characterized by a pair of closely spaced surface defects (angle of separation with respect to the center of the droplet θ < 5°) connected by a disclination winding to/from the droplet center, which led to the positioning of pairs of colloids with well-defined spacing at these surface defects. The separation of the pairs of surface-adsorbed colloids was colloid size-dependent, ranging from 1.11 ± 0.04 μm for 1 μm-in-diameter colloids to 1.7 ± 0.2 μm for 200 nm-in-diameter colloids. We also observed long-lived metastable configurations in which the two surface point defects were separated by much larger distances (corresponding to populations with angles of θ = 20 ± 10° and 85 ± 10° with respect to the center), and observed these pairs of defects to also position pairs of colloids. A third configuration, the diametrical spherical structure (DSS) was also observed. Consistent with the predictions of computer simulations, we found experimentally that the DSS is indeed composed of disconnected defect rings positioned along the diameter of the droplet. Finally, these results reveal that the rich palette of defects exhibited by confined cholesteric LC systems (equilibrium and metastable) provide the basis of a versatile class of templates that enable the surface positioning of colloids in ways that are not possible with achiral LC droplets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗