Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Growth Mode Transition in Complex Oxide Heteroepitaxy: Atomically Resolved Studies

Here we performed investigations of the atomic-scale surface structure of epitaxial La 5/8 Ca 3/8 MnO 3 thin films as a model system dependent on growth conditions in pulsed laser deposition with emphasis on film growth kinetics. Postdeposition in situ scanning tunneling microscopy was combined with in operando reflective high-energy electron diffraction to monitor the film growth and ex situ X-ray diffraction for structural analysis. We find a correlation between the out-of-plane lattice parameter and both adspecies mobility and height of the Ehrlich–Schwoebel barrier, with mobility of adatoms greater over the cationically stoichiometric terminations. We find that the data suggest that the out-of-plane lattice parameter is dependent on the mechanism of epitaxial strain relaxation, which is controlled by the oxidative power of the deposition environment.

36 MATERIALS SCIENCE↗

Deep Data Analysis of Conductive Phenomena on Complex Oxide Interfaces: Physics from Data Mining

Spatial variability of electronic transport in BiFeO3-CoFe2O4 (BFO-CFO) self-assembled heterostructures is explored using spatially resolved first order reversal curve (FORC) current voltage (IV) mapping. Multivariate statistical analysis of FORC-IV data classifies statistically significant behaviors and maps characteristic responses spatially. In particular, regions of grain, matrix, and grain boundary responses are clearly identified. K-means and Bayesian demixing analysis suggests the characteristic response be separated into four components, with hysteretic type behavior localized at the BFO-CFO tubular interfaces. The conditions under which Bayesian components allow direct physical interpretation are explored, and transport mechanisms at the grain boundaries and individual phases are analyzed. This approach conjoins multivariate statistical analysis with physics-based interpretation, actualizing a robust, universal, data driven approach to problem solving, which can be applied to exploration of local transport and other functional phenomena in other spatially inhomogeneous systems.

big data↗

Polarization screening-induced magnetic phase gradients at complex oxide interfaces

Thin-film oxide heterostructures show great potential for use in spintronic memories, where electronic charge and spin are coupled to transport information. Here we use a La 0.7 Sr 0.3 MnO 3 (LSMO)/PbZr 0.2 Ti 0.8 O 3 (PZT) model system to explore how local variations in electronic and magnetic phases mediate this coupling. We present direct, local measurements of valence, ferroelectric polarization and magnetization, from which we map the phases at the LSMO/PZT interface. We combine these experimental results with electronic structure calculations to elucidate the microscopic interactions governing the interfacial response of this system. We observe a magnetic asymmetry at the LSMO/PZT interface that depends on the local PZT polarization and gives rise to gradients in local magnetic moments; this is associated with a metal–insulator transition at the interface, which results in significantly different charge-transfer screening lengths. This work establishes a framework to understand the fundamental asymmetries of magnetoelectric coupling in oxide heterostructures.

36 MATERIALS SCIENCE↗

Valence-state reflectometry of complex oxide heterointerfaces

Emergent phenomena in transition-metal-oxide heterostructures such as interface superconductivity and magnetism have been attributed to electronic reconstruction, which, however, is difficult to detect and characterise. Here we overcome the associated difficulties to simultaneously address the electronic degrees of freedom and distinguish interface from bulk effects by implementing a novel approach to resonant X-ray reflectivity (RXR). Our RXR study of the chemical and valance profiles along the polar (001) direction of a LaCoO 3 film on NdGaO 3 reveals a pronounced valence-state reconstruction from Co 3+ in the bulk to Co 2+ at the surface, with an areal density close to 0.5 Co 2+ ions per unit cell. An identical film capped with polar (001) LaAlO 3 maintains the Co 3+ valence over its entire thickness. As a result, we interpret this as evidence for electronic reconstruction in the uncapped film, involving the transfer of 0.5e – per unit cell to the subsurface CoO 2 layer at its LaO-terminated polar surface.

36 MATERIALS SCIENCE↗

A termination-insensitive and robust electron gas at the heterointerface of two complex oxides

The single-crystal SrTiO 3 (001) has two different surface terminations, TiO 2 and SrO. One most remarkable observation in previous studies is that only the heterointerfaces with TiO 2 -terminated SrTiO 3 , which usually combines with polar oxides such as LaAlO 3 , host an electron gas. Here we show that a robust electron gas can be generated between a non-polar oxide, CaHfO 3 , and SrTiO 3 (001) with either termination. Unlike the well-known electron gas of LaAlO 3 /SrTiO 3 , the present one of CaHfO 3 /SrTiO 3 essentially has no critical thickness of CaHfO 3 , can survive a long-time oxygen annealing at high temperature, and its transport properties are stable under exposure to water and other polar solvents. By electrostatic gating through CaHfO 3 , field-effect devices are demonstrated using CaHfO 3 /SrTiO 3 heterointerfaces with both terminations. These results show that the electron gas reported in the present study is unique and promising for applications in oxide electronics.

36 MATERIALS SCIENCE↗

Interface-induced magnetic polar metal phase in complex oxides

Abstract Polar metals are commonly defined as metals with polar structural distortions. Strict symmetry restrictions make them an extremely rare breed as the structural constraints favor insulating over metallic phase. Moreover, no polar metals are known to be magnetic. Here we report on the realization of a magnetic polar metal phase in a BaTiO 3 /SrRuO 3 /BaTiO 3 heterostructure. Electron microscopy reveals polar lattice distortions in three-unit-cells thick SrRuO 3 between BaTiO 3 layers. Electrical transport and magnetization measurements reveal that this heterostructure possesses a metallic phase with high conductivity and ferromagnetic ordering with high saturation moment. The high conductivity in the SrRuO 3 layer can be attributed to the effect of electrostatic carrier accumulation induced by the BaTiO 3 layers. Density-functional-theory calculations provide insights into the origin of the observed properties of the thin SrRuO 3 film. The present results pave a way to design materials with desired functionalities at oxide interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarity compensation in ultra-thin films of complex oxides: The case of a perovskite nickelate

We address the fundamental issue of growth of perovskite ultra-thin films under the condition of a strong polar mismatch at the heterointerface exemplified by the growth of a correlated metal LaNiO 3 on the band insulator SrTiO 3 along the pseudo cubic [111] direction. While in general the metallic LaNiO 3 film can effectively screen this polarity mismatch, we establish that in the ultra-thin limit, films are insulating in nature and require additional chemical and structural reconstruction to compensate for such mismatch. A combination of in-situ reflection high-energy electron diffraction recorded during the growth, X-ray diffraction, and synchrotron based resonant X-ray spectroscopy reveal the formation of a chemical phase La 2 Ni 2 O 5 (Ni 2+ ) for a few unit-cell thick films. First-principles layer-resolved calculations of the potential energy across the nominal LaNiO 3 /SrTiO 3 interface confirm that the oxygen vacancies can efficiently reduce the electric field at the interface.

36 MATERIALS SCIENCE↗

Effect of doping and chemical ordering on the optoelectronic properties of complex oxides: Fe 2 O 3 –V 2 O 3 solid solutions and hetero-structures

The electronic and optical properties of a-(Fe1xVx)2O3 at low (x = 0.04) and high (x = 0.5) doping levels are investigated using a combination of periodic and embedded cluster approaches, and time dependent density functional theory. At low V concentrations the onset of the optical absorption is B0.5 eV (i.e., nearly 1.6 eV lower than that in pure a-Fe2O3) and corresponds to the electron transitions from V 3d to Fe 3d* orbitals. At high V concentrations, optical absorption energies and intensities are sensitive to specific arrangements of Fe and V atoms and their spin configuration that determine Fe–V hybridization. The onset of the lowest inter-vanadium absorption band in the case of Fe2O3/V2O3 hetero-structures is as low as B0.3 eV and the corresponding peak is at B0.7 eV. In contrast, in the case of solid solutions this peak has lower intensity and is shifted to higher energy (B1.2 eV). Analysis of the orbital character of electronic excitation suggests that Fe2O3/V2O3 hetero-structures absorb light much more effectively than random alloys, thus promoting efficient photo-induced carrier generation. These predictions can be tested in a-(Fe1xVx)2O3 thin films synthesized with well-controlled spatial distribution of Fe and V species.

Environmental Molecular Sciences Laboratory↗

Synthesis, characterization, and theoretical analysis of a plutonyl phosphine oxide complex

The interplay of bond strength and covalency are examined in AnO 2 Cl 2 (OPcy 3 ) 2 (An = Pu, U) complexes. The synthesis of trans-PuO 2 Cl 2 (OPcy 3 ) 2 , 1-Pu, has been carried out and confirmed by single crystal X-ray diffraction along with UV-vis-NIR, and 31 P NMR spectroscopies. Theoretical analysis finds that despite a higher calculated covalency for the Pu–Cl interaction, the Pu–OPcy 3 interaction is stronger due to the accumulation of electron density in the interatomic region. As a result, the coordination of equatorial ligands slightly decreases the strength of the Pu≡O yl interactions relative to the free gas phase (PuO 2 ) 2+ ion.

Windorff, Cory J.↗

Atomic site sensitivity of the energy loss magnetic chiral dichroic spectra of complex oxides

The quantitative analysis of magnetic oxide core level spectra can become complicated when the magnetic atoms are located at several nonequivalent atomic sites in the crystal. This is, for instance, the case for Fe atoms in magnetite, which are located in tetrahedral and octahedral atomic sites; in this case, the x-ray magnetic circular dichroic (XMCD) spectra recorded at the L{sub 2,3} edge of Fe contain contributions from the different nonequivalent atomic sites, which unfortunately cannot be separated. Energy loss magnetic chiral dichroic (EMCD) spectra are the transmission electron microscope analogies of the XMCD spectra. One of the important differences between these two techniques of magnetic analysis is that EMCD uses a fast electron beam instead of polarized light. The fast electrons behave like Bloch states in the sample, and the fine structure of the EMCD spectra is strongly influenced by channeling and dynamical diffraction effects. These effects can be adjusted by changing the experimental configuration. We use theoretical calculations, which include dynamical diffraction effects and in which electronic transitions are treated in the atomic multiplet formalism, to show that the relative weight of the Fe atoms in different nonequivalent atomic sites can be changed by a proper choice of the position of the detector and of the magnetite sample orientation and thickness. We conclude that EMCD spectra could be used to isolate the magnetic contribution of atoms in each of the nonequivalent atomic sites, which would not be possible with XMCD techniques.

36 MATERIALS SCIENCE↗

Nd{sub 2±x}Zr{sub 2∓x}O{sub 7±x/2} (−0.2≤x≤0.4) complex oxides: Effect of anion disorder on ionic conductivity

In the present work, a series of Nd{sub 2±x}Zr{sub 2∓x}O{sub 7±x/2} (−0.2≤x≤0.4) was prepared by self assisted gel-combution method followed by high temperature sintering at 1673 K. Thorough structural characterizations were done by X-ray diffraction and Raman spectroscopic techniques. The nominal compositions Nd{sub 1.6}Zr{sub 2.4}O{sub 7.2} and Nd{sub 1.8}Zr{sub 2.2}O{sub 7.1} were found to possess single-phasic pyrochlore structure whereas Nd{sub 2.0}Zr{sub 2.0}O{sub 7} and Nd{sub 2.2}Zr{sub 1.8}O{sub 6.9} consisted of a pyrochlore phase and a small amount of hexagonal Nd{sub 2}O{sub 3} as an impurity phase. Electrical behavior of the samples was examined by AC impedance analysis. Even though the activation energies of all the samples are not very different, a high pre-exponential factor for the Nd{sub 1.6}Zr{sub 2.4}O{sub 7.2} composition resulted in high ionic conductivity (3.37 × 10{sup −3} Scm{sup −1} at 773 K). This high ionic conductivity value makes it a superior candidate as an electrolyte material for SOFC applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗