Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Novel IR Phosphor Based on Sr{sub 3}La{sub 2}(Ge{sub 3}O{sub 9}){sub 2} : Nd{sup 3+},Ho{sup 3+} Germanate

Cyclogermanate Sr{sub 3}La{sub 2}(Ge{sub 3}O{sub 9}){sub 2}, isostructural to silicate Sr{sub 3}Er{sub 2}(Si{sub 3}O{sub 9}){sub 2}, activated by neodymium and holmium is obtained for the first time by the precursor method. Ion Nd{sup 3+} in the structure of Sr{sub 3}La{sub 2}(Ge{sub 3}O{sub 9}){sub 2} is a sensitizer of the infrared luminescence of Ho{sup 3+}. Excitation by radiation with a wavelength of 808 nm leads to a series of emission lines in the luminescence spectra of Sr{sub 3}La{sub 2-x}Nd{sub x}(Ge{sub 3}O{sub 9}){sub 2} : Ho{sup 3+} in the short-wave and middle-IR ranges (1.0–3.4 μm). The highest intensity of lines at 2.1 and 2.7 μm, associated with the {sup 5}I{sub 7} → {sup 5}I{sub 8} and {sup 5}I{sub 6} → {sup 5}I{sub 7} transitions in the Ho{sup 3+} ion, is found for compositions containing traces of holmium. Based on the analysis of the concentration dependences of the luminescence intensity, an optimal composition of the phosphor is determined, which ensures the maximum efficiency of conversion of laser radiation energy. The data obtained are interpreted in the assumption of cross-relaxation energy transfer from Nd{sup 3+} to Ho{sup 3+}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Rapid discovery of high hardness multi-principal-element alloys using a generative adversarial network model

Multi-principal element alloys (MPEAs) continue to gain research prominence due to their promising high-temperature microstructural and mechanical properties. Recently, machine learning (ML) and materials informatics have been used extensively for screening MPEAs, however, most of these efforts were focused on constructing classification and regression models for predicting phase stability and mechanical properties of known compositions. These approaches may accelerate the screening process but optimizing new compositions with desirable properties within a practical time frame from an infinitely large design space of MPEA systems remains a grand challenge. To tackle this composition optimization challenge, a generative adversarial network coupled with a neural-network ML model was utilized to design MPEAs by filtering compositions that have high hardness. Even in a high-dimensional space with 18 elements as descriptors, the ML model was able to generate optimized compositions from which one composition was found to have 10% higher hardness (941 HV) than the maximum in the training data (857 HV). Density-functional theory was used to provide thermodynamic and electronic insights to higher hardness of the new MPEA found. The present work can optimize compositions from a wide design space of 18 elements (including W, Ta and Nb) that presents an opportunity to synthesize new compositions for applications ranging from corrosion-resistant alloys to nuclear materials. Here the findings suggest that generative ML can greatly accelerate materials discovery by identifying novel compositions, which can serve as a data-informed tool to guide experiments.

36 MATERIALS SCIENCE↗

Pt skin on Pd–Co–Zn/C ternary nanoparticles with enhanced Pt efficiency toward ORR

Exploring highly active, stable and relatively low-cost nanomaterials for the oxygen reduction reaction (ORR) is of vital importance for the commercialization of proton exchange membrane fuel cells (PEMFCs). A highly active, durable, carbon supported, and monolayer Pt coated Pd–Co–Zn nanoparticle is synthesized via a simple impregnation–reduction method, followed by spontaneous displacement of Pt. By tuning the atomic ratios, we obtain the composition–activity volcano curve for the Pd–Co–Zn nanoparticles and determined that Pd : Co : Zn = 8 : 1 : 1 is the optimal composition. Compared with pure Pd/C, the Pd 8 CoZn/C nanoparticles show a substantial enhancement in both the catalytic activity and the durability toward the ORR. Moreover, the durability and activity are further enhanced by forming a Pt skin on Pd 8 CoZn/C nanocatalysts. Interestingly, after 10 000 potential cycles in N 2 -saturated 0.1 M HClO 4 solution, Pd 8 CoZn@Pt/C shows improved mass activity (2.62 A mg -1 Pt) and specific activity (4.76 A m -2 total), which are about 1.4 and 4.4 times higher than the initial values, and 37.4 and 5.5 times higher than those of Pt/C catalysts, respectively. After accelerated stability testing in O 2 -saturated 0.1 M HClO 4 solution for 30 000 potential cycles, the half-wave potential negatively shifts about 6 mV. Our results show that the Pt skin plays an important role in enhancing the activity as well as preventing degradation.

36 MATERIALS SCIENCE↗

Effect of Si Content on Extreme Fast Charging Behavior in Silicon–Graphite Composite Anodes

Commercial Li-ion batteries typically incorporate a small amount of high-capacity silicon (Si)-based materials in the composite graphite-based anode to increase the energy density of the battery. However, very little is known about the effects of Si on the fast-charging behavior of composite anodes. Herein, we examine the effects of the Si/graphite ratio in the composite anode on the fast-charging behavior of full cells. We show that addition of Si increases the rate capability from 1C to 8C and improves the capacity retention in early cycles at 6C due to reduced overpotential in constant current charging cycles. The impacts of Si content on fast-charging aging were identified by Post-Test characterization. Despite realizing benefits of available capacity and reduced Li plating at 6C, silicon–electrolyte interactions lead the time-dependent cell performance to fade quickly in the long term. The Post-Test analysis also revealed the thickening of the electrode and nonuniform distribution of electrolyte decomposition products on the Si-containing anodes, as well as the organic-rich solid electrolyte interphase (SEI), which are the factors behind cell degradation. Our study sheds insight on the advantages and disadvantages of Si/graphite composite anodes when they are used in fast-charging applications and guides further research in the area by designing an optimized composition of Si incorporated in a mature graphite matrix.

25 ENERGY STORAGE↗

Optimal design of composite hip implants using NASA technology

Using an adaptation of NASA software, we have investigated the use of numerical optimization techniques for the shape and material optimization of fiber composite hip implants. The original NASA inhouse codes, were originally developed for the optimization of aerospace structures. The adapted code, which was called OPORIM, couples numerical optimization algorithms with finite element analysis and composite laminate theory to perform design optimization using both shape and material design variables. The external and internal geometry of the implant and the surrounding bone is described with quintic spline curves. This geometric representation is then used to create an equivalent 2-D finite element model of the structure. Using laminate theory and the 3-D geometric information, equivalent stiffnesses are generated for each element of the 2-D finite element model, so that the 3-D stiffness of the structure can be approximated. The geometric information to construct the model of the femur was obtained from a CT scan. A variety of test cases were examined, incorporating several implant constructions and design variable sets. Typically the code was able to produce optimized shape and/or material parameters which substantially reduced stress concentrations in the bone adjacent of the implant. The results indicate that this technology can provide meaningful insight into the design of fiber composite hip implants.

Blake, T. A.↗

Optimization study of Ultra-long Cycle Fast Reactor core concept

An optimization of an Ultra-long Cycle Fast Reactor (UCFR) design with a power rating of 1000 MW(electric), UCFR-1000, has been performed. Firstly, geometric optimization has been performed in the aspects of core size and core shape in terms of thermal–hydraulic (TH) feedback. Secondly, fuel composition optimization has been performed by adopting pressurized water reactor (PWR) spent fuel (SF) as a blanket material as well as natural uranium (NU). Thirdly, thorium has been loaded in the inner core for the optimization of radial power distribution. Lastly, a small-size UCFR with a power rate of 100 MWe has been developed with optimization of maximum neutron flux and fast neutron fluence limit for a short term deployable nuclear reactor. The equivalent diameter and the height of the optimized UCFR-1000 core are 5.9 and 2.4 m, respectively, while the equivalent diameter and the height of the optimized UCFR-100 core are 4.3 and 1.0 m, respectively. The size of the optimized UCFR-1000 has been enlarged in the radial direction and shortened in the axial direction from those of the initial UCFR design (Tak et al., 2013a) and this modification makes the burning speed of active core movement slower. It has been confirmed for both designs that a full-power operation of 60 years without refueling is feasible with respect to isotopics and criticality by a breed-and-burn strategy. The core performance characteristics of both designs have been evaluated in terms of axial/radial power shapes, neutron flux and nuclide distributions, breeding ratio, reactivity feedback coefficients, control rod worth, etc. By the design optimization study in this paper, the reductions of maximum neutron flux, fast neutron fluence, and axial/radial power peaking have been achieved, which are favorable for the safety of the UCFR.

Breed-and-burn↗

Self-Healing, Re-adhering, and Corrosion-Mitigating Inorganic Cement Composites for Geothermal Wells at 270°-300°C: Final Report

Under the DOE EERE Geothermal Technologies Office (GTO)-funding project in FY 2016- 2018, the scope of work at Brookhaven National Laboratory (BNL) aimed 1) to conduct the screening of qualified candidates for self-healing cement composites reinforced with microcarbon fiber (MCF), 2) to obtain the fundamental understanding of self-healing mechanism, to develop self-healing aides, 3) to evaluate re-adhering performance of debonded self-healing composites to carbon steel (CS) casing or granite rock formation, 4) to evaluate bond durability of composite/CS joint in acid and thermal shock environments, 5) to assess the corrosion mitigation of CS by composites adhering and re-adhering to CS surfaces, and 6) to investigate the maintenance of pumpability at 85° and 100°C of optimized composite slurry as well as to evaluate self-healing and re-adhering ability of pumpable composite formulation at hydrothermal temperatures, ranging from 270° to 300°C. In this work, three different cementitious material groups, 1) Ordinary Portland Cement (OPC)-based cements, 2) alkali (sodium metasilicate, SMS)-activated cements, and 3) phosphate (sodium hexametaphosphate, SHMP)-bonded cements, were evaluated to meet the following ten material criteria suitable for inorganic cement composites in six different environments, the plain water, alkali carbonate, geo-brine, thermal shock, pH 0.6 H 2 SO 4 /brine, and pH 5.5 scCO 2 /brine.

15 GEOTHERMAL ENERGY↗

Highly Ordered Mesoporous Bimetallic Phosphides as Efficient Oxygen Evolution Electrocatalysts

Oxygen evolution from water using earth abundant transition metal based catalysts is of importance for the commercialization of water electrolyzer. Herein, we report a novel hard templating method to synthesize transition metal phosphides with uniform shape and size. By virtue of the structural feature, synergistic effect among metals and the in situ formed active species, the as-prepared phosphides with optimized composition present enhanced electrocatalytic performance towards oxygen evolution reaction in alkaline solution. In details, the most efficient catalyst reaches a current density of 10 mA/cm2 at a potential of 1.511 V vs reversible hydrogen electrode, which is much lower than that of commercial RuO2 catalyst. Our work offers a new strategy to optimize the catalysts for water splitting by controlling the morphology and composition.

Environmental Molecular Sciences Laboratory↗

A new glass-free LTCC microwave ceramic – (1 − x) Li{sub 2.08}TiO{sub 3} + xLiF

Graphical abstract: - Highlights: • Sintering temperature of Li{sub 2}TiO{sub 3} was reduced to 900 °C by doping with LiF and excessive lithium. • A new glass-free LTCC microwave ceramic – (1 − x) Li{sub 2.08}TiO{sub 3} + xLiF was obtained. • The obtained LTCC material exhibited excellent microwave dielectric properties. - Abstract: The structure and microstructure of the (1 − x) Li{sub 2.08}TiO{sub 3} + xLiF (0.11 ≤ x ≤ 0.14) ceramics were studied by X-ray powder diffraction (XRD), thermal dilatometry and scanning electron microscopy (SEM). The microwave dielectric properties of the ceramics were studied with a network analyzer. All samples exhibited single monoclinic phase. The sintering temperature was successfully reduced to about 900 °C/2 h for the LiF-doped Li{sub 2.08}TiO{sub 3} specimens. The dielectric permittivity slightly decreased, whereas the Q × f value changed little, with the increase in LiF dopant. The temperature coefficient of resonant of frequency (τ{sub f}) value changed from positive to negative with increasing x, and a near zero value was obtained at x = 0.13 composition. Optimized microwave dielectric properties with ε{sub r} = ∼22.8, Q × f = ∼63,000 GHz and τ{sub f} = ∼1.0 ppm/°C for x = 0.13 composition sintered at 900 °C/2 h. The XRD and back scattering SEM analysis showed that the ceramic was compatible with Ag powders after sintering at 900 °C/2 h.

36 MATERIALS SCIENCE↗

A "Tread" Ahead of the Competition

Through a consortium formed by NASA's Glenn Research Center and the Great Lakes Industrial Technology Center, Goodyear acquired a software use agreement for NASA's Micromechanics Analysis Code (MAC), in an effort to design stronger and safer tires. Based on the Generalized Method of Cells micromechanics methodology, the MAC technology has allowed Goodyear scientists and engineers to perform structural analysis of composite laminates for tires all in one step, rather than the several steps previously required. Currently, the MAC code can be used to assess and optimize composite laminates; set cord-spacing guidelines (the diameter and distance between cords may impact the overall durability of a tire); explain structural impact of geometrical configurations; and compare the behavior of the different wire constructions that make up a tire. Furthermore, the MAC software contains a built-in material database and several representative volume elements for a wider choice of composites to better represent the plies and belts in a tire. The end result of the process ultimately reduces the time spent on building, testing, and adjusting tires.

Source record↗

Polythiophene coated aromatic polyimide enabled ultrafast and sustainable lithium ion batteries

Organic composite electrode materials based on aromatic polyimide (PI) and electron conductive polythiophene (PT) have been prepared by a facile in situ chemical oxidation polymerization method. The optimized composite electrode PI30PT delivers a remarkable high-rate cyclability, achieving a high capacity of 89.6 mA h g -1 at 20 C with capacity retention of 94% after 1000 cycles.

25 ENERGY STORAGE↗

Oxidation Resitant HfC-TaC Rocket Thruster for High Performance Propellants

The purpose of this reasearch effort was to develop high temperature, oxidation resistant thrusters which would lessen the thruster cooling requirements, resulting in increased performance and longer life for onboard propulsion systems for spacecraft. This research effort focussed on developing ceramic matrix composites (CMCs) for this application, and specifically investigated the use of HfC stabilized with TaC. This material composition can potentially operate in a stoichiometric oxygen to hydrogen ratio at a temperature of 5000 deg F (2760 deg C) in a radiatively cooled mode. Various compositions of Hafnium Carbide (HfC) and Tantalum Carbide (TaC) were deposited by chemical vapor deposition (CVD) and tested, in an attempt to identify the composition which offered the best oxidation resistance. Although it was identified that small amounts of TaC appeared to offer improved oxidation resistance over HfC alone, an optimal composition was not identified. A 251bf thruster was fabricated from a novel CMC sandwich construction with a HfC-TaC matrix, and survived two test firings, each of 5 seconds before a failure in the injector caused the run to be aborted. It was not possible to control the relative stoichiometry of the HfC and TaC composition throughout the reactor due to the large difference in the thermodynamics of the HfC and TaC formation from their respective chlorides. This also resulted in an inability to infiltrate TaC into the preform under the experimental conditions investigated. Other material compositions were fabricated and tested and two material systems; HfC-SiC functionally graded to C(sub f)/C and Re functionally graded to C(sub f)/C were selected for further testing. These functionally graded composites have use in a number of propulsion applications presently of interest to NASA and the defense industry. Their ability to withstand extremely hostile thermal environments and the light-weight and high-strength exhibited from the C(sub f)/C composite make these materials particularly suited for these applications. In the Phase III which is presently underway, Re functionally graded to C(sub f)/C is being further developed and tested for application in the thrust cells for the Linear Aerospike Engine for the X33 and RLV.

Patterson, Mark↗

Microstructure and Mechanical Properties of Low-Activation Fe-Cr-V Multicomponent Single-Phase Alloys

A ternary equiatomic and nearly equiatomic alloy composed of the low-activation elements Fe, Cr, and V was designed for potential application as low-activation structural materials for the first wall of fusion reactors. The optimal composition of the multicomponent alloy was determined by minimizing the Gibbs free energy for solid-solution formation. The microstructure, phase stability, and mechanical properties of the equiatomic and optimized Fe-Cr-V alloys were studied. The equiatomic alloy consisted of a body-centered-cubic (BCC) solid-solution phase with a small amount of a face-centered-cubic (FCC) solid-solution phase, whereas the optimized alloy consisted of a single BCC solid-solution phase in the as-cast state. The crystal grains of both alloys were equiaxial. No phase transition was observed in the optimized alloy after homogenization; however, for the equiatomic alloy, the FCC solid-solution phase disappeared and surface relief was observed. The Vickers microhardness and yield strength of the Fe-Cr-V alloys increased after homogenization compared with those of the as-cast alloys.

36 MATERIALS SCIENCE↗

Three-dimensional PtNi hollow nanochains as an enhanced electrocatalyst for the oxygen reduction reaction

Three-dimensional porous PtNi hollow nanochains were successfully synthesized via a galvanic replacement method using Ni nanosponges as sacrificial templates in an aqueous solution. It is found that the composition and shell thickness of 3D PtNi hollow nanochains can be easily controlled by tuning the concentration of Pt precursors. The as-prepared PtNi hollow nanochains with an optimized composition present a high electrochemical surface area (70.8 m 2 g –1 ), which is close to that of commercial Pt/C (83 m 2 g –1 ). Moreover, the PtNi catalyst with a Pt content of ~77% presents superior electrocatalytic performance for the oxygen reduction reaction compared to commercial Pt/C. It shows a mass activity of 0.58 A mg Pt –1 , which is around 3 times higher than that of Pt/C. Lastly, this strategy may be extended to the preparation of other multimetallic nanocrystals with 3D hollow nanostructures, which are expected to present high catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of orbits with incomplete knowledge of the mathematical expectancy and the matrix of covariation of errors

The problem of selecting the optimal algorithm of filtration and the optimal composition of the measurements is examined assuming that the precise values of the mathematical expectancy and the matrix of covariation of errors are unknown. It is demonstrated that the optimal algorithm of filtration may be utilized for making some parameters more precise (for example, the parameters of the gravitational fields) after preliminary determination of the elements of the orbit by a simpler method of processing (for example, the method of least squares).

Bakhshiyan, B. T.↗

Quasi-Static and Dynamic Analysis of Composite Panels: Challenges in Engineering-Level Commercial Software

In engineering applications, where analysis time and efficiency are essential, analytical models and commercially available finite element (FE) material models are the two mainstream methods used to analyze composite crush scenarios. A reliable numerical model addressing the crushing response of composite materials requires a nonlinear progressive damage analysis which includes appropriate failure mechanisms such as matrix cracking, fragmentation, delamination, and fiber breakage. One might be able to address all these interacting failure responses through implementation/validation of a user defined material model or by utilization of a commercially available model, the latter being the most efficient engineering approach. In this paper, the quasi-static and dynamic crushing response of composite specimens, consisting of a C-channel and a corrugated geometry manufactured with carbon fiber/epoxy matrix fabric, are modeled using the progressive composite damage model within ABAQUS. The novel part of this work, which has not been previously addressed in the literature, is the utilization of a detailed parametric study to optimize composite damage model parameters for a given quasi-static crush simulation in ABAQUS. C-channel experiments were used to calibrate the model and then refine/optimize a set of material parameters that best fit the experimental results. These identical parameters were then used to simulate the crush response of the corrugated channel specimens, thereby making it a pure prediction and not a double recalibration. Next, the dynamic response of both panels were predicted, further confirming the predictive capability of the developed numerical model. The effect of parameter variation on the crush response is fully documented for future use in engineering applications utilizing this specific ABAQUS damage model.

Paria Naghipour↗

A Design Methodology for Optimizing and Integrating Composite Materials in Gear Structures

The application of composite materials to gear structures is complex because of the gear shape, the need for precise dimensional tolerances, and the complex dynamic load condition. Methods are presented in this work to design and optimize an integrated composite hub-web structure that can be used as part of a hybrid composite-steel gear. The composite hub-web structure is a planar structure with a large decrease in thickness from the hub to the rim. Methods for design and optimization of this variable-thickness structure are presented along with a method for forming braided prepreg material to conform to the shape of this structure. A layered approach is presented that integrates cut plies or filler materials for thickness buildup with continuous-fiber layers for the primary load path. An additional gear design concept is presented that has an axially extended continuous-fiber composite structure that can be combined with the planar structure. A proposed optimization methodology is introduced where an optimized design is output for each type of optimization simulation. Through this process, composite knowledge can be incorporated in the optimization, and more control is given over the design during the process. The methods in this study provide a tool for designing and optimizing composite structures for gears and other high-power-density applications.

optimization↗

Enhanced photocatalytic degradation of methylene blue: Preparation of TiO{sub 2}/reduced graphene oxide nanocomposites by direct sol-gel and hydrothermal methods

Highlights: • TiO{sub 2}-RGO nanocomposites presented, in all the cases studied, improved photocatalytic properties compared to bare TiO{sub 2}. • An optimal composition, in terms of TiO{sub 2}/RGO ratio was found in both series nanocomposites. • Nanocomposites of sol-gel method presented improved textural properties than those of hydrothermal method. • Optimization in the preparation, needed to obtain materials with finer properties for effective application in environmental. - Abstract: In this study, two different preparation methods of titanium dioxide nanoparticles/reduced graphene oxide nanocomposites were investigated using direct sol-gel method followed by hydrothermal treatment or simple hydrothermal route. A different amount of graphene (1- 20%) was mixed with TiO{sub 2} for both series of samples in order to improve the photocatalytic activity. The influence of the preparation method on the physico-chemical properties was established by different characterization methods and the photocatalytic degradation of methylene blue (MB) under UV light irradiation was used as test reaction. The highest photocatalytic activity was observed for the nanocomposites containing 10 wt% of graphene. The elimination of MB can reach 93% and 82% for the nanocomposites with 10 wt% graphene prepared by the sol-gel and hydrothermal methods, respectively. These photocatalysts are promising for practical application in nanotechnology.

36 MATERIALS SCIENCE↗