Search NASA⌕ Search

SEARCH · Search NASA

Results for “computer code development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Parametric studies to determine the effect of compliant layers on metal matrix composite systems

Computational simulation studies are conducted to identify compliant layers to reduce matrix stresses which result from the coefficient of thermal expansion mismatch and the large temperature range over which the current metal matrix composites will be used. The present study includes variations of compliant layers and their properties to determine their influence on unidirectional composite and constituent response. Two simulation methods are used for these studies. The first approach is based on a three-dimensional linear finite element analysis of a 9 fiber unidirectional composite system. The second approach is a micromechanics based nonlinear computer code developed to determine the behavior of metal matrix composite system for thermal and mechanical loads. The results show that an effective compliant layer for the SCS 6 (SiC)/Ti-24Al-11Nb (Ti3Al + Nb) and SCS 6 (SiC)/Ti-15V-3Cr-3Sn-3Al (Ti-15-3) composite systems should have modulus 15 percent that of the matrix and a coefficient of thermal expansion of the compliant layer roughly equal to that of the composite system without the CL. The matrix stress in the longitudinal and the transverse tangent (loop) direction are tensile for the Ti3Al + Nb and Ti-15-3 composite systems upon cool down from fabrication. The fiber longitudinal stress is compressive from fabrication cool down. Addition of a recommended compliant layer will result in a reduction in the composite modulus.

Caruso, J. J.↗

Radiation protection effectiveness of a proposed magnetic shielding concept for manned Mars missions

The effectiveness of a proposed concept for shielding a manned Mars vehicle using a confined magnetic field configuration is evaluated by computing estimated crew radiation exposures resulting from galactic cosmic rays and a large solar flare event. In the study the incident radiation spectra are transported through the spacecraft structure/magnetic shield using the deterministic space radiation transport computer codes developed at Langley Research Center. The calculated exposures unequivocally demonstrate that magnetic shielding could provide an effective barrier against solar flare protons but is virtually transparent to the more energetic galactic cosmic rays. It is then demonstrated that through proper selection of materials and shield configuration, adequate and reliable bulk material shielding can be provided for the same total mass as needed to generate and support the more risky magnetic field configuration.

Townsend, Lawrence W.↗

Parametric studies to determine the effect of compliant layers on metal matrix composite systems

Computational simulation studies are conducted to identify compliant layers to reduce matrix stresses which result from the coefficient of thermal expansion mismatch and the large temperature range over which the current metal matrix composites will be used. The present study includes variations of compliant layers and their properties to determine their influence on unidirectional composite and constituent response. Two simulation methods are used for these studies. The first approach is based on a three-dimensional linear finite element analysis of a 9 fiber unidirectional composite system. The second approach is a micromechanics based nonlinear computer code developed to determine the behavior of metal matrix composite system for thermal and mechanical loads. The results show that an effective compliant layer for the SCS 6 (SiC)/Ti-24Al-11Nb (Ti3Al + Nb) and SCS 6 (SiC)/Ti-15V-3Cr-3Sn-3Al (Ti-15-3) composite systems should have modulus 15 percent that of the matrix and a coefficient of thermal expansion of the compliant layer roughly equal to that of the composite system without the CL. The matrix stress in the longitudinal and the transverse tangent (loop) direction are tensile for the Ti3Al + Nb and Ti-15-3 composite systems upon cool down from fabrication. The fiber longitudinal stress is compressive from fabrication cool down. Addition of a recommended compliant layer will result in a reduction in the composite modulus.

Caruso, J. J.↗

ICAN sensitivity analysis

A computer program called Integrated Composite Analyzer (ICAN) was used to predict the properties of high-temperature polymer matrix composites. ICAN is a collection of NASA Lewis Research Center-developed computer codes designed to carry out analysis of multilayered fiber composites. The material properties used as input to the program were those of the thermoset polyimide resin PMR-15 and the carbon fiber Celion 6000. The sensitivity of the predicted composite properties to variations in the resin and fiber properties was examined. In addition, the predicted results were compared with experimental data. In most cases, the effect of changes in resin and fiber properties on composite properties was reasonable. However, the variations in the composite strengths with the moisture content of the PMR-15 resin were inconsistent. The ICAN-predicted composite moduli agreed fairly well with experimental values, but the predicted composite strengths were generally lower than experimental values.

Frimpong, Stephen↗

Computational simulation of hot composites structures

Three different computer codes developed in-house are described for application to hot composite structures. These codes include capabilities for: (1) laminate behavior (METCAN); (2) thermal/structural analysis of hot structures made from high temperature metal matrix composites (HITCAN); and (3) laminate tailoring (MMLT). Results for select sample cases are described to demonstrate the versatility as well as the application of these codes to specific situations. The sample case results show that METCAN can be used to simulate cyclic life in high temperature metal matrix composites; HITCAN can be used to evaluate the structural performance of curved panels as well as respective sensitivities of various nonlinearities, and MMLT can be used to tailor the fabrication process in order to reduce residual stresses in the matrix upon cool-down.

Chamis, Christos C.↗

ASTROP3 user's guide

ASTROP3 (Aeroelastic Stability and Response of Propulsion Systems) is a FORTRAN computer code developed for calculating the performance and dynamic stability (classical flutter) of single rotation propfans. Three-dimensional, subsonic aerodynamics with constant pressure panel discretization and MSC/NASTRAN finite element analysis of the blade are used to calculate the steady and unsteady aerodynamic forces. The flutter analysis is a modal based technique using motion dependent aerodynamic forces based on in-vacuum frequencies and normal modes of the individual propfan blades. The execution of ASTROP3 is illustrated through the calculation of blade performance and blade aeroelastic stability for the SR7L rotor. These calculations are representative of applications for ASTROP3. All input and output files necessary for program execution are discussed, as well as other appropriate information to aid the user in applying the program.

August, Richard↗

Metal matrix composite analyzer (METCAN) user's manual, version 4.0

The Metal Matrix Composite Analyzer (METCAN) is a computer code developed at Lewis Research Center to simulate the high temperature nonlinear behavior of metal matrix composites. An updated version of the METCAN User's Manual is presented. The manual provides the user with a step by step outline of the procedure necessary to run METCAN. The preparation of the input file is demonstrated, and the output files are explained. The sample problems are presented to highlight various features of METCAN. An overview of the geometric conventions, micromechanical unit cell, and the nonlinear constitutive relationships is also provided.

Lee, H.-J.↗

Design tradeoffs on engine-integrated hypersonic vehicles

Two classes of airbreathing hypersonic vehicle concepts, one for primarily cruise missions and the other for accelerator type missions, are presented. Both are designed with waverider airframes and hydrogen-fueled scramjet engine modules. Cruise configurations are optimized for the product of I(sp) and L/D while matching lift to weight and thrust to drag at some equivalence ratio. Accelerator configurations are optimized for effective specific impulse while matching lift to weight at an equivalence ratio of one. The method and computer code developed to optimize the configurations are discussed. The features and design tradeoffs for each class of vehicles are described. Recently available weight estimates for all-body waveriders have had a significant impact on the integrated configurations. Mach 8 vehicles at 40 km altitude optimized with the cruise objective function have L/Ds of 2.55 to 2.92 and I(sp)s of 2850 to 2940 sec. A Mach 14 vehicle at 40-km altitude optimized with the accelerator objective function has an I(sp) sub eff of 189 sec, and a Mach 10 vehicle an I(sp) sub eff of 880 sec.

O'Neill, Mary Kae L.↗

PAYCOS, a multidisciplinary sizing code for hypersonic vehicles

PAYCOS is a computer code developed to rapidly perform concept sizing, concept evaluation, and associated trade studies for supersonic and hypersonic maneuvering vehicles. PAYCOS is a multidisciplinary analysis code that allows the engineer to determine the best geometric configuration for each design through parametric studies and mathematical optimization. This paper presents a general overview of the code, including a brief discussion of the approach used to develop it. The modular structure of the code is reviewed, and a brief discussion of each module is presented. Input data needed to run the code and output data supplied by it are discussed. The role of mathematical optimization in the solution process is discussed in some detail and examples of this process are presented. Finally, current modifications to the code are described along with potential future modifications and applications.

Edington, Larry↗

Computing Flow Transition On Parallel Processors

Parallel algorithm developed on multiple-microprocessor computer. Program initiated to develop computer codes capable of directly simulating and mathematically modeling transition process at mach numbers ranging from subsonic to hypersonic. Parallel computers potentially offer reduction of processing time; processing time inversely proportional to number of available processors.

Bokhari, S.↗

Double-diffusive fingering convection in a porous medium

The characteristics of nonlinear two-dimensional horizontally periodic double-diffusive fingering convection in a saturated porous medium is investigated, using the Darcy equation including Brinkman and Forchheimer terms for the momentum equation. To solve the equations and the corresponding initial and boundary conditions, a Galerkin method is applied in the horizontal direction, and a hybrid finite difference method is used in the vertical direction. The developed computer code was used to compute the thermal convection case, and the results were found to be in good agreement with existing results.

Chen, Falin↗

Burnett solutions along the stagnation line of a cooled cylinder in low-density hypersonic flows

The Burnett equations in the cylindrical coordinate system have been applied to the hypersonic flow over a cylinder in low density environments. Through a local similarity transformation, the Burnett equations are degenerated into nonlinear third-order ordinary differential equations which are only valid along the stagnation line. These equations are solved by the multi-staged Runge-Kutta integration technique. Steady state solutions are asymptotically reached by the time-marching procedure. A newly-developed computer code is used to solve both the Navier-Stokes and the Burnett equations within the shock layer. The computed heat transfer coefficients are consistent with wind-tunnel and STS flight data. Comparisons with the DSMC solutions and the Boltzmann solutions show that the Burnett equations are more appropriate as the governing equations than the Navier-Stokes equations in the transitional flow regime.

Liaw, G. S.↗

Computational simulation of hot composite structures

Three different computer codes developed in-house are described for application to hot composite structures. These codes include capabilities for: (1) laminate behavior (METCAN); (2) thermal/structural analysis of hot structures made from high temperature metal matrix composites (HITCAN); and (3) laminate tailoring (MMLT). Results for select sample cases are described to demonstrate the versatility as well as the application of these codes to specific situations. The sample case results show that METCAN can be used to simulate cyclic life in high temperature metal matrix composites; HITCAN can be used to evaluate the structural performance of curved panels as well as respective sensitivities of various nonlinearities, and MMLT can be used to tailor the fabrication process in order to reduce residual stresses in the matrix upon cool-down.

Chamis, C. C.↗

Analyzing Acoustic Propagation In A Pump Diffuser And Volute

Theory and computer codes developed for use in analyzing propagation of sinusoidal components of fluctuations of pressure (acoustic waves) through fluid in diffuser and in volute or discharge duct of centrifugal pump. Reflections from impedance mismatches taken into account. Such analysis of propagation and resultant fluctuations of pressure important part of analysis of fluid-borne contributions to stresses on volute housing, volute liner, and/or discharge duct.

Chon, Juliet T.↗

Probabilistic assessment of space nuclear propulsion system nozzle

In assessing the reliability of a space nuclear propulsion system (SNPS) nozzle, uncertainties associated with the following design parameters were considered: geometry, boundary conditions, material behavior, and thermal and pressure loads. A preliminary assessment of the reliability was performed using NESSUS (Numerical Evaluation of Stochastic Structures Under Stress), a finite-element computer code developed at the NASA Lewis Research Center. The sensitivity of the nozzle reliability to the uncertainties in the random variables was quantified. With respect to the effective stress, preliminary results showed that the nozzle spatial geometry uncertainties have the most significant effect at low probabilities whereas the inner wall temperature has the most significant effect at higher probabilities.

Shah, Ashwin R.↗

Effects of the cooling system parameters on heat transfer and performance of the PAFC stack during transient operation

An experimental investigation for the effects of transient operation of a phosphoric acid fuel-cell stack on heat transfer and temperature distribution in the electrodes has been conducted. The proposed work utilized the experimental setup with modifications, which was designed and constructed under NASA Contract No. NCC-3-17(5). The experimental results obtained from this investigation and the mathematical model obtained under NASA Contract No. NCC3-17(4) after modifications, were utilized to develop mathematical models for transient heat transfer coefficient and temperature distribution in the electrode and to evaluate the performance of the cooling - system under unsteady state conditions. The empirical formulas developed were then implemented to modifying the developed computer code. Two incompressible coolants were used to study experimentally the effect of the thermophysical properties of the cool-ants on the transient heat transfer coefficient and the thermal contact resistance during start-up and shut-down processes. Coolant mass flow rates were verified from 16 to 88.2 Kg/hr during the transient process when the electrical power supply was gradually increased or decreased in the range (O to 3000 W/sq m). The effect of the thermal contact resistance with a range of stack pressure from O to 3500 KPa was studied.

Ridha, Rabi M. J.↗

Multidisciplinary Design Of Hot Composite Structures

Unified computer code developed to implement multidisciplinary approach to design and analysis of composite-material structures that must withstand high temperatures. Code modular: includes executive module communicating with and coordinating other modules performing calculations pertaining to traditionally separate disciplines like those of acoustics, structural vibrations, structural loads, and thermal effects. Essential feature, finite-element numerical simulation of relevant physical phenomena according to applicable disciplines. Same finite-element mesh used in thermal, vibrational, and structural analyses; minimizing data-preparation time and eliminating errors incurred in transforming temperatures from one finite-element mesh to another.

Chamis, Christos C.↗

Ion propulsion

An ion engine is a plasma thruster which produces thrust by extracting ions from the plasma and accelerating them to high velocity with an electrostatic field. The ions are then neutralized and leave the engine as high velocity neutral particles. The advantages of ion engines are high specific impulse and efficiency and their ability to operate over a wide range of input powers. In comparison with other electric thrusters, the ion engine has higher efficiency and specific impulse than thermal electric devices such as the arcjet, microwave, radiofrequency and laser heated thrusters and can operate at much lower current levels than the MPD thruster. However, the thrust level for an ion engine may be lower than a thermal electric thruster of the same operating power, consistent with its higher specific impulse, and therefore ion engines are best suited for missions which can tolerate longer duration propulsive phases. The critical issue for the ion engine is lifetime, since the prospective missions may require operation for several thousands of hours. The critical components of the ion engine, with respect to engine lifetime, are the screen and accelerating grid structures. Typically, these are large metal screens that must support a large voltage difference and maintain a small gap between them. Metallic whisker growth, distortion and vibration can lead to arcing, and over a long period of time ion sputtering will erode the grid structures and change their geometry. In order to study the effects of long time operation of the grid structure, we are developing computer codes based on the Particle-In-Cell (PIC) technique and Laser Induced Fluorescence (LIF) diagnostic techniques to study the physical processes which control the performance and lifetime of the grid structures.

Meserole, J. S.↗