Search NASA⌕ Search

SEARCH · Search NASA

Results for “constriction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Experimental investigation of a wall stablized arc with comparisons to theoretical predictions

A wall-stabilized, constricted-arc heater was investigated by extensive measurements of pressure, voltage, and wall heat flux at different axial locations along the constrictor. Radial temperature profiles were measured at one axial location by the radiance of a single line method and also by the continuum radiance at a wavelength of 4955 A. The arc heater with an inside diameter of 2.37 cm and a constrictor length of 42 cm was operated with nitrogen flow rate from about 2 to 10 g/sec, and are currents from 400 to 1200 amperes. Based on a literature search, two different digital computer programs were selected which were used to predict the pertinent parameters by numerical solutions to the governing differential equations. The program selections were based on completeness and availability. In general the predictions were adequate when laminar flow was assumed, and the greatest difficulty was encountered in the predictions of wall heat flux. The results of the measurements are shown in graphical form, along with the theoretical predictions from both computer programs.

Wells, W. L.↗

On detonation waves supported by diffusion flames.

An eigenvalue condition to determine propagation velocity of detonation waves in a tube is derived for the case where the oxidizer and fuel are in the gaseous and condensed phase, respectively, so that the combustion occurs only within the peripheral boundary layer. It is shown that the self-sustained shock propagation is possible if core streamtube constriction, due to combustion in the boundary layer, is strong enough to form a converging nozzle, and for a sonic throat to exist.

Fujitsuna, Y.↗

Otolithic influences on extraocular and intraocular muscles

Selective stimulation of utricular gravireceptors leads to gross activation of the bulbar reticular formation where a strong interaction with evoked spino-bulbo-spinal reflex activity occurs. The utricular neurons encountered by microelectrodes in the lateral vestibular nuclei show four types of elicited activity; two of these display an increased firing rate, and two exhibit pronounced inhibitory effects. Application of a stimulus of long duration and constant intensity to the utricle has shown that rapid adaptation of the peripheral receptors is a prominent feature. The effects of selective utricular stimulation upon eye movements, as recorded by the corneoretinal potential method, have been studied in experiments on cats and monkeys and it can be firmly stated that prolonged stimulation of the utricle can evoke strong primary nystagmus, followed by a secondary nystagmus at the cessation of stimulation. The action of utricular stimulation on ocular reflexes has been examined further, with particular attention to evoked pupillary reactions in both cats and monkeys: constriction during the fast phase of the brisk conjugate eye movement, and dilatation during the flow phase.

Gernandt, B. E.↗

Magnetic hysteresis in natural materials

Magnetic hysteresis loops and the derived hysteresis ratios R sub H and R sub I are used to classify the various natural dilute magnetic materials. R sub I is the ratio of saturation isothermal remanence (I sub R) to saturation (I sub S) magnetization, and R sub H is the ratio of remanent coercive force (H sub R) to coercive force (H sub C). The R sub H and R sub I values depend on grain size, the characteristics of separate size modes in mixtures of grains of high and low coercivity, and the packing characteristics. Both R sub H and R sub I are affected by thermochemical alterations of the ferromagnetic fraction. Hysteresis loop constriction is observed in lunar samples, chondrite meteorites, and thermochemically altered basaltic rocks, and is due to mixtures of components of high and low coercivity. Discrete ranges of R sub H and R sub I for terrestrial and lunar samples and for chondrite meteorites provide for a classification of these natural materials based on their hysteresis properties.

Wasilewski, P. J.↗

Geysering inhibitor for vertical cryogenic transfer piping

Geysering (i.e., the expulsion of boiling liquid and its vapor from a vertical tube) has been a problem for the missile industry in long vertical cryogenic propellant feed lines connecting the launch vehicle propellant tank with the rocket engines. A proposed novel method of inhibiting geysering and the associated pressure gradients provides a self-starting self-regulating action that is not dependent on other active systems or components. The inhibiting action is attained by incorporating a concentric tube within the main transfer tube to prevent constriction of natural convective flow.

Howard, F. S.↗

Formation of internally-confined semiconductor lasers

In technique for fabrication of strip lasers, current constriction is accomplished by diffusing blocking regions into n-type substrate prior to growth. Current flow is controlled by blocking layers, which results in reduction of threshold current and better heat dissipation.

Cannuli, V. M.↗

Jet pump assisted artery

A procedure for priming an arterial heat pump is reported; the procedure also has a means for maintaining the pump in a primed state. This concept utilizes a capillary driven jet pump to create the necessary suction to fill the artery. Basically, the jet pump consists of a venturi or nozzle-diffuser type constriction in the vapor passage. The throat of this venturi is connected to the artery. Thus vapor, gas, liquid, or a combination of the above is pumped continuously out of the artery. As a result, the artery is always filled with liquid and an adequate supply of working fluid is provided to the evaporator of the heat pipe.

Source record↗

Reflex limb dilatation following norepinephrine and angiotensin II in conscious dogs

The extent to which norepinephrine (NE) and angiotensin II (AN) constrict the mesenteric, renal, and iliac beds in conscious dogs is evaluated with a view to elicit opposing reflex actions tempering the vasoconstriction in the limb of the animals tested. The afferent and efferent mechanisms mediating this reflex are analyzed. It is shown that intravenous NE and AN cause striking reflex iliac dilatation in the limb of the conscious dog. The afferent arc of this reflex involves both arterial baroreceptor and vagal path-ways, whereas the efferent mechanism involves an interaction of alpha-adrenergic and histaminergic receptors.

Vatner, S. F.↗

Solar modulation and a galactic origin for the anomalous component observed in low-energy cosmic rays

The current theory of solar modulation can be used to argue that the cosmic-ray component at low energies, which is observed to have an anomalous composition, is not of galactic origin, i.e., it is not a component of the galactic cosmic-ray flux. The current theory predicts, from quite general considerations, that an unreasonably large intensity of cosmic rays, by many orders of magnitude, would be required in the interstellar medium to account for the observed fluxes. Conceivably, the current modulation theory could be modified so that only reasonable interstellar fluxes are predicted. One such modification involves an unusual scheme for particle diffusion in the interplanetary medium. Particles are assumed to diffuse not as a result of their own motion among small-scale irregularities in the magnetic field, but rather in a process in which they are trapped between time-varying constrictions in the large-scale field.

Fisk, L. A.↗

Germanium-overcoated niobium Dayem bridges

Overcoating constriction microbridges with semiconducting germanium provides additional thermal conductivity at liquid-helium temperatures to reduce the effects of self-heating in these Josephson junctions. Microwave-induced steps were observed in the I-V characteristics of an overcoated Dayem bridge fabricated in a 15-nm-thick niobium film; at least 20 steps could be counted at 4.2 K. No steps were observed in the I-V characteristics of the bridge prior to overcoating. In addition, the germanium overcoat can protect against electrical disturbances at room temperature.

Holdeman, L. B.↗

Methods and new approaches to the calculation of physiological parameters by videodensitometry

A complex system featuring a video-camera connected to a video disk, cine (medical motion picture) camera and PDP-9 computer with various input/output facilities has been developed. This system enables the performance of quantitative analysis of various functions recorded in clinical studies. Several studies are described, such as heart chamber volume calculations, left ventricle ejection fraction, blood flow through the lungs and also the possibility of obtaining information about blood flow and constrictions in small cross-section vessels

Kedem, D.↗

Plasma cleaning device

High vacuum cleaning of contaminated surfaces such as hydrocarbon containment films can be accomplished by a plasma cleaning device which includes a plasma discharge housing to permit generation of a plasma in an environment having a higher pressure than the surface which is to be cleaned. A ground electrode and a radio frequency electrode partially surround a quartz plasma tube, for the introduction of an ionizable gas. These electrodes ionize the gas and help generate the plasma. This plasma flows through a non-constrictive aperture, through the plasma discharge housing and then on to the contaminated surface.

Shannon, R. L.↗

Extent of utilization of the Frank-Starling mechanism in conscious dogs

The left ventricular end-diastolic pressure-dimension relationships in conscious dogs were studied; the ventricle was stressed to its limit in terms of myocardial preload in order to assess the extent of use of the Frank-Starling mechanism under these conditions. The preload was increased through volume loading with saline infusions, the provocation of global myocardial ischemia by constriction of the left main coronary artery, and infusion of methoxamine. While left ventricular end-diastolic pressure increased substantially in the reclining conscious animals, the left ventricular end-diastolic diameter did not increase, suggesting a minimum role for the Frank-Starling mechanism in this case.

Boettcher, D. H.↗

An investigation of heat pipe meniscus heat transfer

The use of grooved evaporator surfaces in heat pipes has increased in popularity in the past few years primarily due to the reproducibility achievable with grooved walls and the relatively low costs of the threading or extrusion processes involved in their production. The present study combines both analyses and experiments on square groove geometries, with special emphasis on overcoming the limitations of earlier analyses with finite-difference methods and groove-fillet hydrodynamic simplifications. The groove fillet, which has in previous analyses been assumed constant in radius of curvature, is permitted to change in thickness and curvature consistent with hydrodynamics and heat loss from the groove. A model is developed for accurate determination of the effect of constriction resistance on groove performance. The grooved-surface tests to be conducted are briefly described which will provide data under closely controlled operation to allow comparison and verification of the analyses.

Saaski, E. W.↗

Research on solar-wind and magnetospheric electric fields and plasmas

Attempts were made to determine the role of the interplanetary magnetic field in controlling: (1) particle acceleration processes in the earth's polar cap; (2) plasma convection patterns at high latitudes; and, (3) the topology of magnetic field lines in the earth's polar cusps. The primary result of the study on polar-cap particle acceleration regions was that they tend to occur in only one polar cap at a time, and that they occur in the hemisphere for which the magnetospheric tail-lobe field lines have solar-magnetospheric x components that are antiparallel to those of the interplanetary and tail-lobe magnetic field. Southward-directed interplanetary magnetic fields give rise to broad convection throats which cover several hours of local time across the dayside cleft. Under such conditions, solar-wind plasma is channeled efficiently through the polar cusps to populate the plasma mantle and dayside boundary layer. On the other hand, the appearance of strong northward components in the interplanetary magnetic field result in a very constricted throat, resulting in inefficient plasma entry at the cusps by diffusion processes.

Burch, J. L.↗

Some recent progress in transonic flow computation

Although the development of a finite difference relaxation procedure to solve the steady form of equations of motion gave birth to the study of computational transonic aerodynamics and considerable progress has been made using the small disturbance theory, no general analytical solution method yet exists for transonic flows that include three dimensional unsteady, and viscous effects. Two techniques are described which are useful in computational transonic aerodynamics applications. The finite volume method simplifies the application of boundary conditions without introducing the constriction associated with small disturbance theory. Governing equations are solved in a Cartesian coordinate system using a body-oriented and shock-oriented mesh network. Only the volume and surface normal directions of the volume elements must be known. The other method, configuration design by numerical optimization, can be used by aircraft designers to develop configurations that satisfy specific geometric performance constraints. Two examples of airfoil design by numerical optimization are presented.

Ballhaus, W. F.↗

Method of making a rocket nozzle

A method is described for forming the interior of a nozzle having uneven walls so that a throat of smooth converging and diverging sides is provided for passing flow. A metallic insert material is placed within the flow passageway adjacent to the area where the sharper throat constriction is to be formed, so that the material will flow through the inlet into the throat space when liquefied.

Campbell, D. H.↗