Search NASA⌕ Search

SEARCH · Search NASA

Results for “corrosion resistant material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Anisotropic growth of Ni 2 (Cr,Mo) ordered phase in proton irradiated Ni-Cr-Mo alloys

Ni-Cr-Mo alloys are widely used in the nuclear industry as structural materials due to their high temperature strength and corrosion resistance. Ni-based alloys containing around 33 at.% (Cr+Mo) developed a long-range ordered Ni 2 (Cr,Mo) phase after thermal aging and/or irradiation. The ordering mechanism for thermally-aged Ni 2 (Cr,Mo) phase is well-understood, characterized to be sluggish, homogeneous, and isotropic. The ordering mechanism for irradiation-induced Ni 2 (Cr,Mo) phase is not fully understood, characterized as having rapid formation and demonstrating anisotropic precipitation. Here, this work elucidates the anisotropic precipitation and anisotropic precipitation mechanism of Ni 2 (Cr,Mo) after proton irradiation in Ni-Cr-Mo alloys. Selected area electron diffraction and bright-field scanning transmission electron microscopy imaging are used to image superlattice reflections from the ordered phase and irradiation-induced defects, respectively. A higher degree of anisotropic precipitation is observed with increasing dislocation loop and void size; a phenomenon not observed in thermally aged samples.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Corrosion Resistance of an AlCeMg/Stainless-Steel Reactive Bond

A major issue for metal components in many industries is corrosion as it can substantially reduce their lifetime. This issue is especially problematic for materials used in heat exchanger applications. Al–Ce–Mg alloys, which exhibit corrosion resistance and can reactively bond with other metals, may be a viable solution to this problem. This investigation studied the corrosion behavior of Al–2Ce–6Mg (atomic percent)/stainless-steel (SS) reactive bond interfaces after full immersion in nitric, sulfuric, formic, and mixed acid for 267 h. This particular Al–Ce–Mg alloy was chosen due to its good castability. The results of scanning electron microscope characterization showed that reactive bond formations repeatedly occurred throughout the length of the casting in the as-cut samples and that these formations maintained a secure bonding between the alloy and the stainless-steel tubes. Transmission electron microscopy results showed that there was a clear compositional and microstructural transition across the reactive bond. The results of the immersion tests indicated that the nitric, sulfuric, and the mixed acid did not have an observably negative effect on the reactive bond structure. As for the sample exposed to formic acid only, noticable changes were seen in both the microstructural appearance and the elemental profile across the bond, suggesting that oxide formation occurred.

Brechtl, Jamieson [ORNL] (ORCID:0000000217394283)↗
DOE OSTI2021

Carbon aerogels with integrated engineered macroporous architectures for improved mass transport

Carbon aerogels (CAs) combine unique properties including ultra-high surface area, high electrical conductivity, corrosion resistance, and robust mechanical properties making them ideal materials for electrochemical applications. Traditional CA synthesis results in isotropic, random nanoporous networks that work well for applications relying on diffusional mass transport. However, many applications would benefit from integration of engineered macroporous network structures that enable directed pressure-gradient-driven mass transport. In this study, we report on using 3D-printed sacrificial polymeric templates to generate templated CAs (t-CAs) with integrated engineered nonrandom macroporous network structures. Specifically, we used projection micro-stereo-lithography (PμSL) and two-photon polymerization direct laser writing (2PP-DLW) to fabricate millimeter-to-centimeter-sized 3D sacrificial polymeric templates with features ranging from tens of microns (PμSL) to 100s of nanometers (2PP-DLW). T-CAs were fabricated by infiltrating the templates with resorcinol-formaldehyde (RF) precursor solution, followed by carbonization at 1050 °C to simultaneously convert the RF gel to a CA and decompose the 3D-printed template, leaving an embedded templated macroporous network structure behind. X-ray computer tomography confirms integration of the macroporous architecture defined by the template. The templated macroporous architecture improves mass transport in t-CAs compared to traditional bulk CA as demonstrated by more uniform activation and their response in electrochemical cyclic voltammetry and galvanostatic charge-discharge tests.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Epitaxial nanotwinned metals and alloys: synthesis-twin structure–property relations

Extensive studies have been performed to understand the structure–property relationship in nanotwinned (NT) metals, where the average twin thickness or twin spacing is less than 100 nm. NT metals may have high strength, ductility, good electrical conductivity and corrosion resistance and have promising applications in microelectronics, structural materials and coatings for gas and oil industry. Most prior studies focus on the computational and experimental investigations of NT metals with low stacking fault energy (SFE) and often in polycrystalline forms. In this highlight, we review recent findings on epitaxial growth of NT metals and alloys with low and high SFEs deposited on single crystal substrates, and focus primarily on advancing our comprehension towards tailoring the microstructures and properties of NT metals via extrinsic factors, including the synthesis technique, parametric control and growth template, and intrinsic factors, such as SFE and thermodynamic, kinetic alloying effects. The review intends to illuminate how to synthesize and design epitaxial NT structures to achieve desirable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

TEAMER: Biofouling Analysis for Wave Energy Piston Design - Load Cell Data

Biofouling and corrosion are a major concern for all ocean-deployed components, especially when mechanical motion is involved. Triton has developed the concept of a biofouling mitigation seal as part of the piston sealing assembly for the Triton Wave Energy Converter (TSI-WEC). This mitigation seal has the purpose of preventing the formation of a biofilm on the inside of the piston cylinder. It is hypothesized that the prevention of a biofilm will reduce the amount of macro-biofouling that can occur in the piston assembly. The mitigation seal can also reduce the wear on the main dynamic seal, helping to maintain smooth operation and water-tightness. The cylinder is made from a thermoset composite epoxy, which is resistant to corrosion. However, no studies have researched the material's performance with biofouling. Triton placed two prototype Power Take-Off (PTO) assemblies in a PNNL biofouling tank, one with a biofouling mitigation seal and one without, allowing for an evaluation of seal effectiveness at the prevention of biofouling. In actual WEC operation, wave action would react against the piston, which would drive the linear actuator and electric generator, providing electrical power. In the test setup, this was reversed; a linear actuator was powered to drive the piston in a consistent motion within the cylinder. There are two assemblies: one has a biofouling mitigation seal, the other (control) does not. The following data encompasses a 4 month test period, with load cells being used to monitor piston friction force. Results from this testing will be used to improve seal design and material selection, mitigating risk of premature failure during open water testing and evaluation. This project is part of the TEAMER RFTS 3 (request for technical support) program.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Ab Initio Phase Diagram of Chromium to 2.5 TPa

Chromium possesses remarkable physical properties such as hardness and corrosion resistance. Chromium is also a very important geophysical material as it is assumed that lighter Cr isotopes were dissolved in the Earth’s molten core during the planet’s formation, which makes Cr one of the main constituents of the Earth’s core. Unfortunately, Cr has remained one of the least studied 3d transition metals. In a very recent combined experimental and theoretical study (Anzellini et al., Scientific Reports, 2022), the equation of state and melting curve of chromium were studied to 150 GPa, and it was determined that the ambient body-centered cubic (bcc) phase of crystalline Cr remains stable in the whole pressure range considered. However, the importance of the knowledge of the physical properties of Cr, specifically its phase diagram, necessitates further study of Cr to higher pressure. In this work, using a suite of ab initio quantum molecular dynamics (QMD) simulations based on the Z methodology which combines both direct Z method for the simulation of melting curves and inverse Z method for the calculation of solid–solid phase transition boundaries, we obtain the theoretical phase diagram of Cr to 2.5 TPa. We calculate the melting curves of the two solid phases that are present on its phase diagram, namely, the lower-pressure bcc and the higher-pressure hexagonal close-packed (hcp) ones, and obtain the equation for the bcc-hcp solid–solid phase transition boundary. We also obtain the thermal equations of state of both bcc-Cr and hcp-Cr, which are in excellent agreement with both experimental data and QMD simulations. We argue that 2180 K as the value of the ambient melting point of Cr which is offered by several public web resources (“Wikipedia,” “WebElements,” “It’s Elemental,” etc.) is most likely incorrect and should be replaced with 2135 K, found in most experimental studies as well as in the present theoretical work.

equation of state↗
DOE OSTI2024

Nuclear Data Sensitivity/Uncertainty Studies of Tantalum-Reflected Systems

Tantalum (Ta) is a refractory metal with high melting point and high corrosion resistance. This makes it useful as a mold material for plutonium casting operations. Unfortunately, there are few criticality benchmarks with high nuclear data sensitivities. Given that, it is desirable to design new experiments to provide additional validation data for nuclear criticality safety, which is the objective of the Thales project. Multiple application models were used to represent process conditions (either normal conditions or credible upset conditions) both at Los Alamos National Laboratory (LANL) and Savannah River Site (SRS). A total of 40 application models were obtained. Given this, it was useful to down-select the number of needed application models. This work documents the down-selection based on several nuclear data sensitivity/uncertainty metrics. In addition to showing the result of the specific down-selection used for the Thales project, this work discusses potential ways to represent a large number of application models with a smaller number of proposed experiment designs.

42 ENGINEERING↗
DOE OSTI2020

Durability of ionomer encapsulants in photovoltaic modules

Ethylene vinyl acetate (EVA) has for decades been the preferred material for photovoltaic (PV) module encapsulation. However, while it is relatively inexpensive and initially adheres well to module components, EVA discolors with age and - as interfacial adhesion degrades - becomes susceptible to delamination, ultimately resulting in reduced module efficiency and shortened service lifetimes. As potential replacements for EVA, ionomer thermoplastic materials cure faster, are more resistant to discoloration and potential induced degradation, and do not evolve corrosive acetic acid, making them compatible with new device materials such as perovskites. Since there is limited information on ionomer durability for PV module applications, a series of field and accelerated laboratory aging studies were conducted to assess ionomer interface stability in the presence of terrestrial environmental stressors. It is shown that adhesion to the glass and cell interfaces of PV modules is inferior to EVA, both before and after aging, rendering ionomers particularly susceptible to delamination after short timeframes. Potential solutions to improve ionomer adhesion are discussed.

14 SOLAR ENERGY↗
DOE OSTI2021

Corrosion Protection and Dissimilar Material Joining for Next Generation Lightweight Vehicles

The Arconic Technology Center working with Honda R&D Americas, LLC and the Ohio State University evaluated the corrosion performance of several multi-material conditions and demonstrated the production worthiness of the Resistance Spot Riveting (RSR™) process. RSR is a new technology being developed by Howmet Fastening Systems (formerly Arconic, Inc.) that employs a fastener that is installed using conventional resistance spot welding equipment to produce multi-material joints. The goal of the 3-year project was to demonstrate the use of RSR to join aluminum to steel and aluminum to carbon fiber composites on a prototype scale. Deployment of this technology would help the automotive industry achieve an additional 10 to 20% weight reduction over high strength steels. These weight-savings to the body in white generally translates to 2.5-5.0% of overall vehicle curb weight. The resulting total weight-savings could provide a 1.5% to 3.0% total improvement in fuel efficiency for vehicles that incorporate RSR for multi-material joining. The RSR technology addresses several production barriers to achieving DOE’s fuel efficiency targets including eliminating the need of additional capital for new joining technologies and the flexibility to process conventional steel and multi-material structures with the same equipment. Additionally, the trend towards ultra-high strength steels limits the availability of conventional joining technologies that can effectively process these multi-material combinations. In order to accomplish these goals, the following program milestones were completed by the team: 1) Developed RSR process parameters, producing multi-material joints for mechanical testing and corrosion assessments. 2) Conducted corrosion evaluation of RSR and baseline joints assembled between automotive type aluminum alloys, steels, and carbon fiber using several corrosion mitigation strategies. 3) Developed a production ready feed system and integrate into a robotic resistance spot welding station to simulate automotive production conditions. 4) Produced demonstration assemblies for testing and evaluation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Corrosion integrity of oil cement modified by environment responsive microspheres for CO2 geologic sequestration wells

In order to ensure the safe and effectiveness of CO{sub 2} geological storage, an environmental responsive polymer microspheres (ERPM) was prepared to improve the corrosion resistance of cement stone. The structure and environmental response characteristics of ERPM were characterized, and then the anti-corrosion performance and anti-corrosion mechanism for ERPM were discussed. The results shown that ERPM had good environmental response characteristics and temperature resistance. ERPM could effectively suppressed the corrosion rate and the damage degree of mechanical properties of cement stone. The corrosion integrity of cement stone was improved due to the acidic response characteristic and form polymer films of ERPM, which effectively shield the direct contact between corrosion medium and hydration products.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Cold Spray Additive Manufacturing For New Pipeline Fabrication In Live, Natural Gas Distribution Mains

ULC Technologies (ULC) and the Penn State University Applied Research Lab (PSU ARL) developed a process and approach for rehabilitating live, natural gas distribution pipelines using Cold Spray Additive Manufacturing (CSAM). Robotic inline fabrication of a new pipe will be performed inside a natural gas main without disrupting customers. The material studied was blended with stainless steel which offers corrosion resistance, high strength and compatibility with hydrogen to enable a robust pipeline system that is future proofed. Stainless steel coatings sprayed and tested in the lab showed excellent strength, ductility, and porosity values. ULC initially sought to use methane as the process gas for compatibility with the host pipe, but after evaluating the field and lab challenges, nitrogen was deemed to be more suitable. Early robotic concepts have been developed that indicate technical feasibility. While the technology development originally targeted natural gas distribution mains, market research showed a broader need. Spot repairs performed in natural gas transmission mains may be a more economical approach for reinforcing distribution and transmission mains compared with full pipe-in-pipe rehabilitation. Additive manufacturing offers custom programming, as well as high accuracy and precision. This means custom contours can be manufactured in situ, offering flexibility in the repair solution, such as fabricating internal full circumferential sleeves. The value of the repair can be high at difficult-to-reach locations and in pipes that need reinforcement before the injection of methane-hydrogen blends.

03 NATURAL GAS↗
DOE OSTI2020

Ion irradiation effects on Cr-coated zircaloy-4 surface wettability and pool boiling critical heat flux.

The concept of coating the currently used nuclear fuel cladding (zirconium-based alloy, typically Zircaloy-4 or Zirc-4) with an oxidation preventive layer is a progressing Accident tolerant Fuel (ATF) candidate alloys. The coated Zirc-4-based alloys could be a solution to suppress undesirable fast reaction kinetics with high-temperature steam. Zirc-4 has been the most preferred cladding material in pressurized water reactors (PWRs). Chromium (Cr) based alloys as a coating material provides excellent corrosion protection and good strength and wear resistance. In this paper, we present the surface wettability measurements and pool boiling Critical Heat Flux (CHF) for Cr-coated Zirc-4 claddings pre- and post-exposure to an ion irradiation environment. The wettability measurements, including static contact angle (contact angle, θ) and average surface roughness (surface roughness, Ra), are introduced for samples of different coating thicknesses (5–30 μm thick). The coatings fabricated by the cold spray of Cr-Al particles to 10 mm × 10 mm × 1.95 mm Zirc-4 substrates. Post fabrication, a Pilgering (cold rolling) process, was applied to finalize the coating thickness and resulted in a significant reduction in surface roughness of initially fabricated rough surfaces. The process produced three distinguished samples 5-μm unpolished (as machined), 5-μm, and 30-μm polished (cold rolled). The measurements are presented for the three surfaces and bare Zirc-4 as a baseline surface. The contact angle analyses were implemented in theoretical models from the literature to predict pool boiling CHF. Pool boiling experiments were conducted to measure the pool boiling CHF values and compare them to the predicted values. Scanning Electron Microscope (SEM) images and Energy Dispersive X-ray Spectroscopy (EDS) analysis was performed to characterize the surfaces for better understanding and interpreting the results. The SEM images showed localized surface damage due to ion irradiation. No recognized change in the measured surface roughness due to ion irradiation. The contact angles of irradiated Cr-coated surfaces are consistently higher (10°) than pre-irradiated surfaces. Decreasing the Cr-coating layer thickness resulted in lower contact angle pre- and post- ion irradiation. The predicted pool boiling CHF using the Kandlikar model is in good agreement with the experimentally measured CHF values within ±12% for all samples.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Modeling the Impact of Grain Size on Corrosion Behavior of Ni-Based Alloys in Molten Chloride Salt via Cellular Automata

Molten chloride salts hold significant promise as both thermal transfer and storage media for next-generation concentrated solar power (CSP) systems. However, molten chlorides pose a considerable corrosion risk to structural materials, particularly Ni-based alloys. One approach to enhancing corrosion resistance is through the optimization of grain structure; however, it remains uncertain whether increasing or decreasing grain size enhances corrosion resistance. A cellular automata (CA) program was developed to evaluate the interplay between grain size and corrosion in Ni-based alloy. Our CA program tracks alloy composition, surface roughness, and thickness loss via a graphical user interface, displaying corrosion and diffusion status, and multiple user input cards for tuning the simulation. CA simulations of Inconel 625 indicate enhanced corrosion resistance with increased grain size, with passivating oxides offering limited protection. Additionally, the temporal evolution of alloy surface roughness demonstrates notable fluctuations, with abrupt increases attributed to corrosion along vertical grain boundaries and sudden decreases to grain detachment from the protective film.

Materials Science↗
DOE OSTI2022

Screening of bimetallic electrocatalysts for water purification with machine learning

Electrocatalysis provides a potential solution to NO 3 - pollution in wastewater by converting it to innocuous N 2 gas. However, materials with excellent catalytic activity are typically limited to expensive precious metals, hindering their commercial viability. Here, in response to this challenge, we have conducted the most extensive computational search to date for electrocatalysts that can facilitate NO 3 - reduction reaction, starting with 59 390 candidate bimetallic alloys from the Materials Project and Automatic-Flow databases. Using a joint machine learning- and computation-based screening strategy, we evaluated our candidates based on corrosion resistance, catalytic activity, N 2 selectivity, cost, and the ability to synthesize. We found that only 20 materials will satisfy all criteria in our screening strategy, all of which contain varying amounts of Cu. Our proposed list of candidates is consistent with previous materials investigated in the literature, with the exception of Cu–Co and Cu–Ag based compounds that merit further investigation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗