Instability of a mechanical system induced by an impinging fluid jet
Critical load and instability of smooth and mesh surface mechanical systems subjected to impinging fluid jet, noting static buckling and flutter effects
Feldt, W. T.↗
SEARCH · Search NASA
Results for “critical load”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
NASTRAN buckling analysis of a thin walled cylinder
The computer run time required for a buckling analysis using NASTRAN is considerably greater than for a linear static analysis of the same structure. It is very important to obtain an optimal model size for the structure being analyzed, such that the model is neither so large as to increase running time unnecessarily, nor so small as to hinder accuracy. The problem of critical load accuracy versus model complexity is considered for a thin walled cylinder, using both Level 12 and Level 15 NASTRAN releases.
Wight, R. B.↗
Evaluation of beryllium for space shuttle components
Application of beryllium to specific full-scale space shuttle structural components and assemblies was studied. Material evaluations were conducted to check the mechanical properties of as-received material to gain design information on characteristics needed for the material in the space shuttle environment, and to obtain data needed for evaluating component and panel tests. Four beryllium structural assemblies were analyzed and designed. Selected components of these assemblies, representing areas of critical loading or design/process uncertainty, were designed and tested, and two panel assemblies were fabricated. Trends in cost and weight factors were determined by progressive estimation at key points of preliminary design, final design, and fabrication to aid in a cost/weight evaluation of the use of beryllium.
Trapp, A. E.↗
Flight-test experience of a helicopter encountering an airplane trailing vortex
This paper presents results of a flight-test experiment of a UH-1H helicopter encountering the vortex wake of a C-54 airplane. The helicopter was instrumented to record the pilot control inputs, determine the upset experience, and measure critical loads within the rotor system. During the flight-test program 132 penetrations of the vortex wake were made by the helicopter at separation distances from 3/8 to 6-1/2 nautical miles. Test results indicated that the helicopter upsets and the vortex induced blade loads experienced were minimal and well within safe limits. The upsets were very mild when compared to a typical response of a small airplane to the vortex wake of the C-54 airplane.
Dunham, R. E., Jr.↗
Considerations in STS payload environmental verification
Considerations regarding the Space Transportation System (STS) payload environmental verification are reviewed. It is noted that emphasis is placed on testing at the subassembly level and that the basic objective of structural dynamic payload verification is to ensure reliability in a cost-effective manner. Structural analyses consist of: (1) stress analysis for critical loading conditions, (2) model analysis for launch and orbital configurations, (3) flight loads analysis, (4) test simulation analysis to verify models, (5) kinematic analysis of deployment/retraction sequences, and (6) structural-thermal-optical program analysis. In addition to these approaches, payload verification programs are being developed in the thermal-vacuum area. These include the exposure to extreme temperatures, temperature cycling, thermal-balance testing and thermal-vacuum testing.
Keegan, W. B.↗
Rigidity of lattice domes
The means of ensuring total rigidity of lattice domes, using comparison with solid shells of 1-3 layers are discussed. Irregularities of manufacture, processing, and other factors are considered, as they relate to diminution of rigidity. The discussion uses the concepts of upper and lower critical loads on the structure in question.
Savelyev, V. A.↗
Quiet Clean Short-haul Experimental Engine (QCSEE) composite fan frame design report
An advanced composite frame which is flight-weight and integrates the functions of several structures was developed for the over the wing (OTW) engine and for the under the wing (UTW) engine. The composite material system selected as the basic material for the frame is Type AS graphite fiber in a Hercules 3501 epoxy resin matrix. The frame was analyzed using a finite element digital computer program. This program was used in an iterative fashion to arrive at practical thicknesses and ply orientations to achieve a final design that met all strength and stiffness requirements for critical conditions. Using this information, the detail design of each of the individual parts of the frame was completed and released. On the basis of these designs, the required tooling was designed to fabricate the various component parts of the frame. To verify the structural integrity of the critical joint areas, a full-scale test was conducted on the frame before engine testing. The testing of the frame established critical spring constants and subjected the frame to three critical load cases. The successful static load test was followed by 153 and 58 hours respectively of successful running on the UTW and OTW engines.
Mitchell, S. C.↗
Development of CO2 laser Doppler instrumentation for detection of clear air turbulence, volume 2: Appendices
Analyses of the mounting and mount support systems of the clear air turbulence transmitters verify that satisfactory shock and vibration isolation are attained. The mount support structure conforms to flight crash safety requirements with high margins of safety. Restraint cables reinforce the mounts in the critical loaded forward direction limiting maximum forward system deflection to 1 1/4 inches.
Harris, C. E.↗
Hygrothermal effects on mechanical behavior of graphite/epoxy laminates beyond initial failure
An investigation was conducted to determine the critical load levels and associated cracking beyond which a multidirectional laminate can be considered as structurally failed. Graphite/epoxy laminates were loaded to different strain levels up to ultimate failure. Transverse matrix cracking was monitored by acoustic and optical methods. Residual stiffness and strength that were parallel and perpendicular to the cracks were determined and related to the environmental/loading history. Results indicate that cracking density in the transverse layers has no major effect on laminate residual properties as long as the angle ply layers retain their structural integrity. Exposure to hot water revealed that cracking had only a small effect on absorption and reduced swelling when these specimens were compared with uncracked specimens. Cracked, moist specimens showed a moderate reduction in strength when compared with their uncracked counterparts. Within the range of environmental/loading conditions of the present study, it is concluded that the transverse cracking process is not crucial in its effect on the structural performance of multidirectional composite laminates.
Ishai, O.↗
Analyses of large quasistatic deformations of inelastic bodies by a new hybrid-stress finite element algorithm - Applications
A new hybrid-stress finite element algorithm suitable for analyzing large quasistatic deformations of inelastic solids is presented and its feasibility and performance are demonstrated with examples. The algorithm provides extremely accurate bifurcation analysis which is stable with respect to variation in the finite element mesh, so long as the same type of element is used in every mesh. When the mesh element is varied, the result changes in a predictable manner. The method does not necessarily lead to an upper or lower bound for the critical load. An explicit forward gradient scheme is used to improve stability and is shown to be useful also for elongation-dominated deformations. The application of the method to the onset of necking in plane extension and to deformation and stress in plane extension of an elasticoviscous fluid with an array of cylindrical voids is given in detail.
Reed, K. W.↗
Hygrothermal effects on the mechanical behaviour of graphite fibre-reinforced epoxy laminates beyond initial failure
The critical load levels and associated cracking beyond which a multidirectional laminate can be considered as structurally failed has been determined by loading graphite fiber-reinforced epoxy laminates to different strain levels up to ultimate failure. Transverse matrix cracking was monitored by acoustic and optical methods. The residual stiffness and strength parallel and perpendicular to the cracks were determined and related to the environmental/loading history. Within the range of experimental conditions studied, it is concluded that the transverse cracking process does not have a crucial effect on the structural performance of multidirectional composite laminates.
Ishai, O.↗
Inclusion of elastically connected members in exact buckling and frequency calculations
A standard stiffness matrix procedure which permits any combination of rigid, elastic, pinned or sliding connections of the degrees of freedom at the ends of a member to the nodes of its parent structure is described, in order to show how easily it can be extended to allow an existing algorithm to be used to ensure that no eigenvalues of the parent structure can be missed even when 'exact' member theory is used. The eigenvalues are the natural frequencies of undamped free vibration analyses or the critical load factors of buckling problems. The method preserves the exactness of the member theory and an efficient method for computer application is indicated. The theory also permits any combination of rigid, elastic, pinned or sliding connections between the freedoms of a substructure and those of its parent structure.
Williams, F. W.↗
Practical considerations in aeroelastic design
The structural design process for large transport aircraft is described. Critical loads must be determined from a large number of load cases within the flight maneuver envelope. The structural design is also constrained by considerations of producibility, reliability, maintainability, durability, and damage tolerance, as well as impact dynamics and multiple constraints due to flutter and aeroelasticity. Aircraft aeroelastic design considerations in three distinct areas of product development (preliminary design, advanced design, and detailed design) are presented and contrasted. The present state of the art is challenged to solve the practical difficulties associated with design, analysis, and redesign within cost and schedule constraints. The current practice consists of largely independent engineering disciplines operating with unorganized data interfaces. The need is then demonstrated for a well-planned computerized aeroelastic structural design optimization system operating with a common interdisciplinary data base. This system must incorporate automated interfaces between modular programs. In each phase of the design process, a common finite-element model for static and dynamic optimization is required to reduce errors due to modeling discrepancies. As the design proceeds from the simple models in preliminary design to the more complex models in advanced and detailed design, a means of retrieving design data from the previous models must be established.
Rommel, B. A.↗
Adhesion, friction and micromechanical properties of ceramics
The adhesion, friction, and micromechanical properties of ceramics, both in monolithic and coating form, are reviewed. Ceramics are examined in contact with themselves, other harder materials, and metals. For the simplicity of discussion, the tribological properties of concern in the processes are separated into two parts. The first part discusses the pull-off force (adhesion) and the shear force required to break the interfacial junctions between contacting surfaces. The role of chemical bonding in adhesion and friction, and the effects of surface contaminant films and temperature on tribological response with respect to adhesion and friction are discussed. The second part deals with abrasion of ceramics. Elastic, plastic, and fracture behavior of ceramics in solid state contact is discussed. The scratch technique of determining the critical load needed to fracture interfacial adhesive bonds of ceramic deposited on substrates is also addressed.
Miyoshi, Kazuhisa↗
Fracture analysis of local delaminations in laminated composites
A shear deformation model was developed to analyze local delaminations growing from transverse cracks in 90 degree plies located around the mid plane of symmetric laminates. The predictions of the model agree reasonably with experimental data from T300/934 graphite epoxy laminates. The predicted behavior is such that, in combination with an edge delamination model, the critical loads can be predicted accurately in the range of n from .5 to 8.
Sriram, P.↗
Fracture analysis of local delaminations in laminated composites
A shear deformation model was developed to analyze local delaminations growing from transverse cracks in 90 degree plies located around the mid plane of symmetric laminates. The predictions of the model agree reasonably with experimental data from T300/934 graphite epoxy laminates. The predicted behavior is such that, in combination with an edge delamination model, the critical loads can be predicted accurately in the range of n from .5 to 8.
Armanios, E. A.↗
Adhesion, friction and micromechanical properties of ceramics
The adhesion, friction, and micromechanical properties of ceramics, both in monolithic and coating form, are reviewed. Ceramics are examined in contact with themselves, other harder materials, and metals. For the simplicity of discussion, the tribological properties of concern in the processes are separated into two parts. The first part discusses the pull-off force (adhesion) and the shear force required to break the interfacial junctions between contacting surfaces. The role of chemical bonding in adhesion and friction, and the effects of surface contaminant films and temperature on tribological response with respect to adhesion and friction are discussed. The second part deals with abrasion of ceramics. Elastic, plastic, and fracture behavior of ceramics in solid state contact is discussed. The scratch technique of determining the critical load needed to fracture interfacial adhesive bonds of ceramic deposited on substrates is also addressed.
Miyoshi, Kazuhisa↗
Fundamental tribological properties of ion-beam-deposited boron nitride films
The adhesion, friction, and micromechanical properties of ion-beam-deposited boron nitride (BN) films are reviewed. The BN films are examined in contact with BN metals and other harder materials. For simplicity of discussion, the tribological properties of concern in the processes are separated into two parts. First, the pull-off force (adhesion) and the shear force required to break the interfacial junctions between contacting surfaces are discussed. The effects of surface films, hardness of metals, and temperature on tribological response with respect to adhesion and friction are considered. The second part deals with the abrasion of the BN films. Elastic, plastic, and fracture behavior of the BN films in solid-state contact are discussed. The scratch technique of determining the critical load needed to fracture interfacial adhesive bonds of BN films deposited on substrates is also addressed.
Miyoshi, Kazuhisa↗