Search NASA⌕ Search

SEARCH · Search NASA

Results for “crop yield simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Spectral estimates of solar radiation intercepted by corn canopies

Reflectance factor data were acquired with a Landsat band radiometer throughout two growing seasons for corn (Zea mays L.) canopies differing in planting dates, populations, and soil types. Agronomic data collected included leaf area index (LAI), biomass, development stage, and final grain yields. The spectral variable, greenness, was associated with 78 percent of the variation in LAI over all treatments. Single observations of LAI or greenness have limited value in predicting corn yields. The proportions of solar radiation intercepted (SRI) by these canopies were estimated using either measured LAI or greenness. Both SRI estimates, when accumulated over the growing season, accounted for approximately 65 percent of the variation in yields. Models which simulated the daily effects of weather and intercepted solar radiation on growth had the highest correlations to grain yields. This concept of estimating intercepted solar radiation using spectral data represents a viable approach for merging spectral and meteorological data for crop yield models.

Bauer, M. E.↗

Predicting weather impacts on corn production in a data-limited region using a transfer learning approach

The stability of food supply and prices may depend more on annual changes in yields from year-to-year variability in weather than on longer-term average changes from changing climatic conditions. However, the absence of high-quality data on crop yields at fine spatial resolutions in many regions of the world makes it challenging to statistically model their response to interannual variability in weather patterns. Therefore, there is a need for empirical methods that can project annual crop yield changes even in limited data regions. Here, we propose a transfer learning algorithm that uses high spatial resolution data from one region to project yields in another region with more limited data. The goal of our work is to understand what data types can be beneficial for transferring learning from a source region to a very different target region with more limited data. We utilize Long Short-Term Memory to develop a transfer learning model that is trained on historical county-level corn yield in the United States and predicts district-level corn yield variations in India. Even using smaller amounts of data in India, simulating a data-scarce region, we achieve an average root mean square error of 0.48 bu acre−1 in predicting interannual yield variations. Using Shapley values to interpret results, we explore the contribution of the different weather parameters to interannual yield variability and find a larger influence of precipitation-related variables. Our study demonstrates the usefulness of this method for transferring models of weather impacts on crop yields trained on a data-rich country to one with more limited data. It suggests the potential of applying the transfer learning model to mitigate the need for extensive raw data globally.

Vishwakarma, Srishti [ORNL] (ORCID:000000031674419↗

BEPAM Model Code and CABBI Simulation Results for "Assessing the Additional Carbon Savings with Biofuel"

This dataset consists of various input data that are used in the GAMS model. All the data are in the format of .inc which can be read within GAMS or Notepad. Main data sources include: acreage data (acre), crop budget data ($/acre), crop yield data (e.g. bushel/acre), Soil carbon sequestration data (KgCO2/ha/yr). Model details can be found in the "Assessing the Additional Carbon Savings with Biofuel" and GAMS model package. ## File Description (1) GAMS Model.zip: This includes all the input files and scripts for running the model (2) Table*.csv: These files include the data from the tables in the manuscript (3) Figure2_3_4.csv: This contains the data used to create the figures in the manuscript (4) BaselineResults.csv: This includes a summary of the model results. (5) SensitivityResults_*.csv: Model results from the various sensitivity analyses performed (6) LUC_emission.csv: land use change emissions by crop reporting district for changes of pasturelands to annual crops.

Anticipated baseline approach↗

Agricultural Productivity Forecasts for Improved Drought Monitoring

Water stresses on agricultural crops during critical phases of crop phenology (such as grain filling) has higher impact on the eventual yield than at other times of crop growth. Therefore farmers are more concerned about water stresses in the context of crop phenology than the meteorological droughts. However the drought estimates currently produced do not account for the crop phenology. US Department of Agriculture (USDA) and National Oceanic and Atmospheric Administration (NOAA) have developed a drought monitoring decision support tool: The U.S. Drought Monitor, which currently uses meteorological droughts to delineate and categorize drought severity. Output from the Drought Monitor is used by the States to make disaster declarations. More importantly, USDA uses the Drought Monitor to make estimates of crop yield to help the commodities market. Accurate estimation of corn yield is especially critical given the recent trend towards diversion of corn to produce ethanol. Ethanol is fast becoming a standard 10% ethanol additive to petroleum products, the largest traded commodity. Thus the impact of large-scale drought will have dramatic impact on the petroleum prices as well as on food prices. USDA's World Agricultural Outlook Board (WAOB) serves as a focal point for economic intelligence and the commodity outlook for U.S. WAOB depends on Drought Monitor and has emphatically stated that accurate and timely data are needed in operational agrometeorological services to generate reliable projections for agricultural decision makers. Thus, improvements in the prediction of drought will reflect in early and accurate assessment of crop yields, which in turn will improve commodity projections. We have developed a drought assessment tool, which accounts for the water stress in the context of crop phenology. The crop modeling component is done using various crop modules within Decision Support System for Agrotechnology Transfer (DSSAT). DSSAT is an agricultural crop simulation system, which integrates the effects of soil, crop phenotype, weather, and management options. It has been in use for more than 15 years by researchers, growers and has become a de-facto standard in crop modeling communities spanning over 100 countries. The meteorological forcings to DSSAT are provided by NASA s National Land Data Assimilation System (NLDAS) datasets. NLDAS is a framework that incorporates atmospheric forcing and land parameter values along with land surface models to diagnose and predict the state of the land surface.

Limaye, Ashutosh↗

LAI Assimilation Schedules to Constrain Uncertain Cultivars and Soils in CERES-Maize

In anticipation of large-domain crop model applications where precise local configuration and calibration is not possible, we describe benefits and potential drawbacks of employing a crop pest module to achieve leaf area index (LAI) assimilation into a high performing CERES-Maize crop model configuration at a field experiment site in Perry, Iowa. Simulation experiments explore the use of MODIS satellite-derived LAI to constrain and adjust LAI to counter imprecise cultivar and soil configurations often occurring in the absence of high-quality local information. Simulations using single-day, window, and continuous LAI replacement across 5 cultivars and 2 soil calibration approaches for nine corn rotation years from 2004 to 2020 led to different yield outcomes and reverberations throughout the field environment. Evaluating variance and mean bias, results indicate minimal interventions in early vegetative and grain-filling stages were more beneficial than use of continuous LAI adjustments, as they minimized disruptions to the internal resource balances governing plant stresses and grain production. LAI adjustment was particularly helpful in constraining growth related to uncertain thermal unit requirements and leaf tip appearance rates (P1 and PHINT cultivar parameters, respectively). Findings underscore the need to assimilate additional state variables to ensure internal biophysical coherence. This approach shows promise for applications spanning wider domains with prediction time pressure where detailed configuration, more complex assimilation methods, or recalibration of crop model parameters may not be practical.

Phenology↗

The 2010 Russian Drought Impact on Satellite Measurements of Solar-Induced Chlorophyll Fluorescence: Insights from Modeling and Comparisons with the Normalized Differential Vegetation Index (NDVI)

We examine satellite-based measurements of chlorophyll solar-induced fluorescence (SIF) over the region impacted by the Russian drought and heat wave of 2010. Like the popular Normalized Difference Vegetation Index (NDVI) that has been used for decades to measure photosynthetic capacity, SIF measurements are sensitive to the fraction of absorbed photosynthetically-active radiation (fPAR). However, in addition, SIF is sensitive to the fluorescence yield that is related to the photosynthetic yield. Both SIF and NDVI from satellite data show drought-related declines early in the growing season in 2010 as compared to other years between 2007 and 2013 for areas dominated by crops and grasslands. This suggests an early manifestation of the dry conditions on fPAR. We also simulated SIF using a global land surface model driven by observation-based meteorological fields. The model provides a reasonable simulation of the drought and heat impacts on SIF in terms of the timing and spatial extents of anomalies, but there are some differences between modeled and observed SIF. The model may potentially be improved through data assimilation or parameter estimation using satellite observations of SIF (as well as NDVI). The model simulations also offer the opportunity to examine separately the different components of the SIF signal and relationships with Gross Primary Productivity (GPP).

vegetation↗

Verification Testing and Veg-05 Tomato Crop Production on the International Space Station

Production of fresh, nutritious, and tasty produce for astronauts during spaceflight may provide health-promoting, bioavailable nutrients and enhance the dietary experience as we move into longer-duration missions. Growing and caring for plants may also reduce the psychological stresses associated with spaceflight and enhance connections to Earth. Requirements to consistently grow a diversity of crops under spaceflight environmental conditions remain poorly defined. The VEG-05 experiment is part of a series of experiments with pick-and-eat salad crops to better define best practices for crop production and handling in space. VEG-05 and predecessor experiments VEG-04A and VEG-04B, use the Veggie vegetable production facilities on the International Space Station to grow salad crops under different spectral compositions. In VEG-04A and B, mizuna mustard was cultivated with two different red: blue light treatments, and in VEG-05 we are cultivating ‘Red Robin’ dwarf cherry tomatoes under the same light spectra. Light can impact the growth habit, yield, nutritional composition, microbial levels, and even flavor attributes within crops, and our team will assess these characteristics for this crop during VEG-05. Prior to launch and installation on ISS in late 2022, both a science verification test (SVT), and an experiment verification test (EVT) were conducted at Kennedy Space Center in ISS Environment Simulator Chambers. Science verification testing, and a previous fertilizer test, grew plants in both plant pillows and PONDS (Passive Orbital Nutrient Delivery System) units and tested two different fertilizer treatments in both sets of hardware, with each test under only one of the light conditions. Because of challenges validating the PONDS hardware on ISS, and with good crop production in plant pillows, the EVT moved forward using only plant pillows with the highest fertilizer composition tested during SVT, and two Veggie units were utilized. One Veggie had light settings consisting of equal levels of red: blue light (150 µmol/m2/s for each color) plus green light (30 µmol/m2/s) while the second Veggie had a 90:10 ratio of red: blue light (270 µmol/m2/s red and 30 µmol/m2/s blue) plus green, so each unit provided 330 µmol/m2/s of photosynthetically active radiation to the tomato crops on average. Our original plan, based on prior ground testing, was to grow the crop for 104 days and harvest at 80, 90 and 104 days after initiation. For SVT, under the equal red: blue light treatment, fruit ripening in plant pillows was delayed and fruit were not ripe by day 80, so actual harvest days were days 90, 97, and 104. For EVT we saw fruit ripening earlier, especially in the high red treatment, and so we harvested at days 83, 90, and 99 days after initiation. In SVT we had mostly daily watering, and this led to excess water in plant pillows, which leaked out. This excess water also caused fungus to grow on one leaf and a couple of plant stems. To reduce this excess moisture, we throttled back the watering for EVT, and used the root mat reservoir more frequently. This led to watering only every other day, reducing crew time needed for plant care, however, two wilting events occurred during this EVT, at days 51 and 75. Plants recovered from these wilting events, but these events may have influenced the rate of fruit ripening and flower formation. Regardless, more than 10 fruit were produced from each plant on average, with the high red treatment producing slightly heavier fruit. Microbial testing from fruit during SVT indicated that fruit were safe for consumption with microbial levels below detection limits. VEG-05 flight and ground operations are expected to run between December 2022 and March 2023. This research was co-funded by the Human Research Program and Space Biology (MTL#1075) in the ILSRA 2015 NRA call.

Gioia D. Massa↗

Dwarf Tomato and Dwarf Pepper as Potential Space Crops

Crops for space life support systems and in particular, early supplemental food production systems must be able to fit into the confined volume of space craft or space habitats. For example, spaceflight plant chambers such as Svet, Lada, Astroculture, BPS, and Veggie provided approximately 15-40 cm of growing height for plant shoots. Six cultivars each of tomato and pepper were selected for initial study based on their advertised dwarf growth and high yields. Plants were grown in 10-cm pots with solid potting medium and controlled-release fertilizer to simulate the rooting constraints that might be faced in space environments. Lighting was provided by fluorescent lamps (~300 umol m(exp -1) s(exp -1) and a 16 h light / 8 h dark photoperiod. Cultivars were then down selected to three each for pepper (cvs. Red Skin, Pompeii, and Fruit Basket) and tomato (cvs. Red Robin, Mohamed, and Sweet n' Neat). In all cases (pepper and tomato), the plants grew to an approximate height of 20 cm and produced between 200 and 300 g fruit fresh mass per plant. In previous hydroponic studies with unrestricted root growth, Fruit Basket pepper and Red Robin tomato produced much larger plants with taller shoots. The findings suggest that high value, nutritious crops like tomato and pepper could be grown within small volumes of space habitats, but horticultural issues, such as rooting volume could be important in controlling plant size.

Life Support↗

A scheme for the uniform mapping and monitoring of earth resources and environmental complexes using ERTS-1 imagery

There are no author-identified significant results in this report. Progress on plans for the development and testing of a practical procedure and system for the uniform mapping and monitoring of natural ecosystems and environmental complexes from space-acquired imagery is discussed. With primary emphasis on ERTS-1 imagery, but supported by appropriate aircraft photography as necessary, the objectives are to accomplish the following: (1) Develop and test in a few selected sites and areas of the western United States a standard format for an ecological and land use legend for making natural resource inventories on a simulated global basis. (2) Based on these same limited geographic areas, identify the potentialities and limitations of the legend concept for the recognition and annotation of ecological analogs and environmental complexes. An additional objective is to determine the optimum combination of space photography, aerial photography, ground data, human data analysis, and automatic data analysis for estimating crop yield in the rice growing areas of California and Louisiana.

Poulton, C. E.↗

Regional and Model-Specific Response Types in A Global Gridded Crop Model Ensemble

Crop models are often employed to project crop yields under changing conditions such as global warming and associated management change for adaptation. Multi-model ensembles are promoted to enhance the robustness of projections, but questions remain on what causes often large differences between projections of individual models. Global Gridded Crop Models (GGCMs) are especially exposed to this question when applied for assessing climate change impacts, adaptation, environmental impacts of agricultural production, because their results are used in downstream analyses, such as in integrated assessment or economic modeling for projecting future land-use change. Even though global gridded crop models are often based on detailed field-scale models or have implemented similar modeling principles in other ecosystem models, global-scale models are subject to substantial uncertainties from both model structure and parametrization as well as from calibration and input data quality. AgMIP’s Global Gridded Crop Model Intercomparison (GGCMI) has thus set out to intercompare GGCMs in order to evaluate model performance, describe model uncertainties, identify inconsistencies within the ensemble and underlying reasons, and to ultimately improve models and modeling capacities. In phase 2 of the GGCMI activities, 12 modeling groups followed a modeling protocol that asked for up to 1404 31-year global simulations at 0.5 arc-degree spatial resolution to assess models’ sensitivities to changes in carbon dioxide (C; 4 different levels) temperature (T; 7 different offset levels), water supply (W; 9 levels), and nitrogen (N; 3 levels), the so-called CTWN experiment (Franke et al. 2020; http://dx.doi.org/10.5194/gmd-13-2315-2020). We here present analyses of model response types using impact response surfaces along the C, T, W, and N dimensions, respectively and collectively. Doing so, we can understand differences in simulated responses per driver rather than aggregated changes in yields. We find that models’ sensitivities to the individual driver dimensions are substantially different and often more different across models than across regions. A cluster analysis finds regional and model-specific patterns. There is some agreement across models with respect to the spatial patterns of response types but strong differences in the distribution of response type clusters across models suggests that models need to undergo further scrutiny. We suggest establishing standards in model process evaluation not only against historical dynamics but also against dedicated experiments across the CTWN dimensions.

crop models↗

Sorghum bicolor Core Metabolism Model

Upregulation of triacylglycerols (TAGs) in vegetative plant tissues such as leaves has the potential to drastically increase the energy density and biomass yield of bioenergy crops. In this context, constraint-based analysis has the promise to improve metabolic engineering strategies. Here we present a core metabolism model for the C4 biomass crop Sorghum bicolor (iTJC1414) along with a minimal model for photosynthetic CO2 assimilation, sucrose and TAG biosynthesis in C3 plants. Extending iTJC1414 to a four-cell diel model we simulate C4 photosynthesis in mature leaves with the principal photo-assimilatory product being replaced by TAG produced at different levels. Independent of specific pathways and per unit carbon assimilated, energy content and biosynthetic demands in reducing equivalents are about 1.3 to 1.4 times higher for TAG than for sucrose. For plant generic pathways, ATP- and NADPH-demands per CO2 assimilated are higher by 1.3- and 1.5-fold, respectively. If the photosynthetic supply in ATP and NADPH in iTJC1414 is adjusted to be balanced for sucrose as the sole photo-assimilatory product, overproduction of TAG is predicted to cause a substantial surplus in photosynthetic ATP. This means that if TAG synthesis was the sole photo-assimilatory process, there could be an energy imbalance that might impede the process. Adjusting iTJC1414 to a photo-assimilatory rate that approximates field conditions, we predict possible daily rates of TAG accumulation, dependent on varying ratios of carbon partitioning between exported assimilates and accumulated oil droplets (TAG, oleosin) and in dependence of activation of futile cycles of TAG synthesis and degradation. We find that, based on the capacity of leaves for photosynthetic synthesis of exported assimilates, mature leaves should be able to reach a 20% level of TAG per dry weight within one month if only 5% of the photosynthetic net assimilation can be allocated into oil droplets. From this we conclude that high TAG levels should be achievable if TAG synthesis is induced only during a final phase of the plant life cycle.

Feedstock Production↗

AgRISTARS: Foreign commodity production forecasting. Minutes of the annual formal project manager's review, including preliminary technical review reports of FY80 experiments

The U.S./Canada wheat/barley exploratory experiment is discussed with emphasis on labeling, machine processing using P1A, and the crop calendar. Classification and the simulated aggregation test used in the U.S. corn/soybean exploratory experiment are also considered. Topics covered regarding the foreign commodity production forecasting project include: (1) the acquisition, handling, and processing of both U.S. and foreign agricultural data, as well as meteorological data. The accuracy assessment methodology, multicrop sampling and aggregation technology development, frame development, the yield project interface, and classification for area estimation are also examined.

Source record↗

AgroIBIS VSF Farmed Pothole Ponding Model Runs

This data set includes modeled (AgroIBIS-VSF) output of crop yield for miscanthus and a corn/soybean rotation in .nc format. Input includes the precipitation scenarios (.csv) used to generate the runs, and supplemental observed yield monitor data (.csv) from the research area of interest.

Agricultural Hydrology (Drainage, Flooding, Irriga↗

Sustainable Use of Groundwater May Dramatically Reduce Irrigated Production of Maize, Soybean, and Wheat

Groundwater extraction in the United States (US) is unsustainable, making it essential to understand the impacts of limited water use on irrigated agriculture. To improve this understanding, we integrated a gridded crop model with satellite observations, recharge estimates, and water survey data to assess the effects of sustainable groundwater withdrawals on US irrigated agricultural production. The gridded crop model agrees with satellite-based estimates of evapotranspiration (R2 = 0.68), as well as survey data from the United States Department of Agriculture (R2 = 0.82–0.94 for county-level production and 0.37–0.54 for county-level yield). Using the optimistic assumption that groundwater extraction equals effective aquifer recharge rate, we find that sustainable groundwater use decreases US irrigated production of maize, soybean, and winter wheat by 20%, 6%, and 25%, respectively. Using a more conservative assumption of groundwater availability, US irrigated production of maize, soybean, and winter wheat decreases by 45%, 37%, and 36%, respectively. The wide range of simulated losses is driven by considerable uncertainty in surface water and groundwater interactions, as well as accounting for the many aspects of sustainability. Our results demonstrate the vulnerability of US irrigated agriculture to unsustainable groundwater pumping, highlighting the difficulty of expanding or even maintaining irrigated food production in the face of climate change, population growth, and shifting dietary demands. These findings are based on reducing pumping by fallowing irrigated farmland; however, alternate pumping reduction strategies or technological advances in crop genetics and irrigation could produce different results.

sustainability↗

Landsat-simulating radiometer for agricultural remote sensing

The reliability of a Landsat-simulating ground-based spectral radiometer for use in agricultural remote sensing was investigated. Significant correlation coefficients in all wavebands except Band 7 were found to exist between Landsat computer compatible tape (CCT) and ground-based radiometric data from several corn fields. No significant correlations were found within data from small grain fields. Combined data from several common agricultural crops yielded significant correlation coefficients in the wavebands most commonly employed in agricultural remote sensing. It was also found that sun angle within certain limits of a given day had minimal effect on ground-based radiometric measurements taken from a fallow and barley field.

Lemme, G. D.↗

Elucidation of Triacylglycerol Overproduction in the C4 Bioenergy Crop Sorghum bicolor by Constraint-Based Analysis

Upregulation of triacylglycerols (TAGs) in vegetative plant tissues such as leaves has the potential to drastically increase the energy density and biomass yield of bioenergy crops. In this context, constraint-based analysis has the promise to improve metabolic engineering strategies. Here we present a core metabolism model for the C 4 biomass crop Sorghum bicolor ( iTJC1414 ) along with a minimal model for photosynthetic CO 2 assimilation, sucrose and TAG biosynthesis in C 3 plants. Extending iTJC1414 to a four-cell diel model we simulate C 4 photosynthesis in mature leaves with the principal photo-assimilatory product being replaced by TAG produced at different levels. Independent of specific pathways and per unit carbon assimilated, energy content and biosynthetic demands in reducing equivalents are about 1.3 to 1.4 times higher for TAG than for sucrose. For plant generic pathways, ATP- and NADPH-demands per CO 2 assimilated are higher by 1.3- and 1.5-fold, respectively. If the photosynthetic supply in ATP and NADPH in iTJC1414 is adjusted to be balanced for sucrose as the sole photo-assimilatory product, overproduction of TAG is predicted to cause a substantial surplus in photosynthetic ATP. This means that if TAG synthesis was the sole photo-assimilatory process, there could be an energy imbalance that might impede the process. Adjusting iTJC1414 to a photo-assimilatory rate that approximates field conditions, we predict possible daily rates of TAG accumulation, dependent on varying ratios of carbon partitioning between exported assimilates and accumulated oil droplets (TAG, oleosin) and in dependence of activation of futile cycles of TAG synthesis and degradation. We find that, based on the capacity of leaves for photosynthetic synthesis of exported assimilates, mature leaves should be able to reach a 20% level of TAG per dry weight within one month if only 5% of the photosynthetic net assimilation can be allocated into oil droplets. From this we conclude that high TAG levels should be achievable if TAG synthesis is induced only during a final phase of the plant life cycle.

59 BASIC BIOLOGICAL SCIENCES↗

Projected Climate Impacts to South African Maize and Wheat Production in 2055: A Comparison of Empirical and Mechanistic Modeling Approaches

Crop model-specific biases are a key uncertainty affecting our understanding of climate change impacts to agriculture. There is increasing research focus on intermodel variation, but comparisons between mechanistic (MMs) and empirical models (EMs) are rare despite both being used widely in this field. We combined MMs and EMs to project future (2055) changes in the potential distribution (suitability) and productivity of maize and spring wheat in South Africa under 18 downscaled climate scenarios (9 models run under 2 emissions scenarios). EMs projected larger yield losses or smaller gains than MMs. The EMs' median-projected maize and wheat yield changes were 3.6% and 6.2%, respectively, compared to 6.5% and 15.2% for the MM. The EM projected a 10% reduction in the potential maize growing area, where the MM projected a 9% gain. Both models showed increases in the potential spring wheat production region (EM = 48%, MM = 20%), but these results were more equivocal because both models (particularly the EM) substantially overestimated the extent of current suitability. The substantial water-use efficiency gains simulated by the MMs under elevated CO2 accounted for much of the EMMM difference, but EMs may have more accurately represented crop temperature sensitivities. Our results align with earlier studies showing that EMs may show larger climate change losses than MMs. Crop forecasting efforts should expand to include EMMM comparisons to provide a fuller picture of crop-climate response uncertainties.

DSSAT↗

Techno‐economic feasibility analysis of engineered energycane‐based biorefinery co‐producing biodiesel and ethanol

Abstract High feedstock cost and low oil yields per unit of land from temperate oilseed crops limit the growth of commercial‐scale biodiesel production. Recently, highly productive crops, such as sugarcane and energycane, have been engineered to accumulate triacylglycerides (TAGs) that allow the production of far more industrial vegetable oil than previously possible. A proof‐of‐concept suggests that biodiesel production from engineered energycane will be possible. However, before making efforts for scale‐up, it is critical to understand the commercial feasibility and economic competitiveness of this process. This study performs techno‐economic analysis of a unique biorefinery processing energycane to co‐produce biodiesel and ethanol. Comprehensive process simulation models were developed for two scenarios: (i) biodiesel from TAGs and ethanol from fermentation of sugars in juice and (ii) biodiesel from TAGs and ethanol from fermentation of sugars in juice and hydrolysis of carbohydrates in bagasse. Based on the target levels, the analysis was performed for energycane containing 0%, 5%, and 7.7% TAGs (d.b.). The biodiesel from engineered energycane was found economically viable and competitive to soybean biodiesel. Although the capital investment is higher compared to the soybean biodiesel plant, the biodiesel production costs ($0.66–$0.9/L) were lower than soybean biodiesel ($0.91/L). Biorefinery‐scenario‐1 processing energycane containing 7.7% TAG produces biodiesel with profitability (IRR 7.84) slightly lower than soybean biodiesel (IRR 8.3), but yields five times of biodiesel per unit land and is self‐sustainable for energy requirements. The surplus electricity can displace fossil electricity and provide environmental benefits. Monte Carlo simulation indicated that biorefinery is profitable with a 29%–65% probability (NPV > 0) which is largely controlled by feedstock composition and biodiesel market price. It is important to note that energycane can be grown on the marginal rainfed lands in S.E. USA, where soybean would not be viable. Biodiesel from engineered energycane would therefore be complementary to soydiesel in the United States.

09 BIOMASS FUELS↗