Search NASA⌕ Search

SEARCH · Search NASA

Results for “curved surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Polarization Switching on the Open Surfaces of the Wurtzite Ferroelectric Nitrides: Ferroelectric Subsystems and Electrochemical Reactivity

Binary ferroelectric nitrides are promising materials for information technologies and power electronics. However, polarization switching in these materials is highly unusual. From the structural perspective, polarization reversal is associated with the change of the effective polarity at the surfaces and interfaces from N‐to‐M terminated, suggesting strong coupling between ferroelectric and chemical phenomena. Phenomenologically, macroscopic studies demonstrate the presence of complex time dependent phenomena including wake‐up. Here, in this study, the polarization switching using the multidimensional high‐resolution piezoresponse force microscopy (PFM) and spectroscopy is explored, detecting both the evolution of induced ferroelectric domain, electromechanical response, and surface deformation during first‐order reversal curve measurements. The presence of two weakly coupled ferroelectric subsystems are demonstrated and the bias‐induced electrochemical reactivity. The observed behaviors are very similar to the recent studies of other wurtzite system but additionally include electrochemical reactivity, suggesting the universality of these behaviors for the wurtzite binary ferroelectrics. These studies suggest potential of high‐resolution multimodal PFM spectroscopies to resolve complex coupled polarization dynamics in materials. Furthermore, these PFM based studies are fully consistent with the recent electron microscopy observations of the shark‐teeth like ferroelectric domains in nitrides. Hence, it is believed that these studies establish the universal phenomenological picture of polarization switching in binary wurtzite.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Patchy nanoparticles by atomic stencilling

Stencilling, in which patterns are created by painting over masks, has ubiquitous applications in art, architecture and manufacturing. Modern, top-down microfabrication methods have succeeded in reducing mask sizes to under 10 nm, enabling ever smaller microdevices as today’s fastest computer chips. Meanwhile, bottom-up masking using chemical bonds or physical interactions has remained largely unexplored, despite its advantages of low cost, solution-processability, scalability and high compatibility with complex, curved and three-dimensional (3D) surfaces. Here we report atomic stencilling to make patchy nanoparticles (NPs), using surface-adsorbed iodide submonolayers to create the mask and ligand-mediated grafted polymers onto unmasked regions as ‘paint’. We use this approach to synthesize more than 20 different types of NP coated with polymer patches in high yield. Polymer scaling theory and molecular dynamics (MD) simulation show that stencilling, along with the interplay of enthalpic and entropic effects of polymers, generates patchy particle morphologies not reported previously. These polymer-patched NPs self-assemble into extended crystals owing to highly uniform patches, including different non-closely packed superlattices. We propose that atomic stencilling opens new avenues in patterning NPs and other substrates at the nanometre length scale, leading to precise control of their chemistry, reactivity and interactions for a wide range of applications, such as targeted delivery, catalysis, microelectronics, integrated metamaterials and tissue engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Ferroelectric Al1 − xBxN thin films integrated on Si

Ferroelectric Al0.93B0.07N thin films are prepared (100) Si substrates. The necessary c-axis out-of-plane orientation to observe macroscopic ferroelectric switching was achieved by implementing an initial Ar/N2 plasma treatment, followed by a thin layer of AlN to initiate the desired texture and a 150 nm W layer. The plasma treatment facilitates crystallinity enhancement of the AlN template layer, allowing for subsequent growth of highly oriented W and Al0.93B0.07N layers. The W layer exhibits random in-plane orientation and exclusive (110) out-of-plane orientation with a rocking curve width of 1.4°. When grown on these W surfaces, 175 nm thick Al0.93B0.07N films exhibit random in-plane orientation and exclusive (001) texture with rocking curve full-width-half-max values of 1.6° and RMS roughness values less than 1 nm. Polarization hysteresis measurements show robust hysteresis with coercive field values of 5.4 MV/cm and remanent polarization values of 136 μC/cm2. XPS depth profile analysis suggests that the plasma treatment converts the existing native oxide to a nitrogen rich oxynitride with approximate composition Si3O0.5N3.67. Cross-sectional TEM reveals that the oxynitride interlayer is amorphous and ∼3.4 nm thick, more than double the native oxide thickness measured by multiwavelength ellipsometry, implying that (oxy)nitride growth continues after conversion of the native oxide. This new family of ferroelectric wurtzites is interesting from an integration perspective given their chemical compatibility with mainstream semiconductors. Developing synthesis routes that promote needed texture while preserving compatible processing windows is an important step toward practical integration.

Physics↗
DOE OSTI2021

Low friction bio-inspired polydopamine/polytetrafluoroethylene coating performance in hydrodynamic bearings

Purpose Low friction polymer coatings able to withstand high loadings and many years of continuous operation are difficult to formulate at low cost, but could find many applications in industry. This study aims to analyze and compare friction and wear performance of novel polydopamine/polytetrafluoroethylene (PDA/PTFE) and traditional tin Babbitt coatings applied to an industrial journal bearing. Design/methodology/approach This paper tested PTFE based coating, co-deposited with PDA, a biopolymer allowing sea mussels to adhere to ocean rocks. This coating was deposited on flat steel substrates and on a curved cast iron hydrodynamic journal bearing surface. The flat substrates were analyzed with a tribometer and an optical microscope, while the coated bearing liners were tested in an industrial laboratory setting at different speeds and different radial loads. Findings PDA/PTFE coating showed 2-3 times lower friction compared to traditional tin Babbitt for flat substrates, but higher friction in the bearing liners. PDA/PTFE also showed considerable wear through coating delamination and abrasion in the bearing liners. Research limitations/implications Five future modifications to mitigate coating flaws are provided, which include modifications to coating thickness and its surface finish. Originality/value While the novel coating showed excellent results on flat substrates, coating performance in a large scale bearing was found to be poor. This study shows that coating preparation needs to be improved to avoid frictional losses and unwanted damage to bearings. We provide several routes that could improve coating performance in industrial applications.

Engineering↗
DOE OSTI2022

Practical guide to understanding goodness-of-fit metrics used in chemical state modeling of x-ray photoelectron spectroscopy data by synthetic line shapes using nylon as an example

Chemical state analysis of a sample surface through fitting bell-shaped curves to x-ray photoelectron spectroscopic polymer data is reviewed using nylon to introduce and discuss aspects of data analysis. Different strategies for modeling chemistry in nylon spectra are presented and in so doing, a case is made to include in published science the design logic and implementation in terms of line shapes and optimization parameter constraints between components in a peak model. Imperfections in line shape relative to the true shape for photoemission lines, when compensated for using constraints to optimization parameters, are shown to provide chemical state information about a sample that justify, for peak models constructed with these limitations, metrics for goodness-of-fit different from those expected for pulse-counted data.

Materials Science↗
DOE OSTI2024

Ion Mobility Separations Using Cocentric Architecture

Ion mobility separations are usually performed in linear channels, which, when extended, can have a large footprint. In this work, we explored the performance of an ion mobility device with a curved architecture which can have a more compact form. The Co-centric Ion Mobility Spectrometer (CIMS) works by manipulating ions between two co-centric surfaces, each containing a serpentine track. The mobility separation inside CIMS is achieved using traveling waveforms (TWs). We initially evaluated the device using ion trajectory simulations using SIMION, which indicated that when ions traveled circularly inside CIMS, they resulted in similar resolving powers and transmitted m/z range as traveling in a straight path in structures for lossless ion manipulations (SLIM). We then performed experimental validation of CIMS in conjunction with a TOF MS. The CIMS was made of 2 flexible printed circuit board materials folded into concentric cylinders separated by a gap of 2.8 mm. The device was about 50 mm diameter × 152 mm long and provided 1.846 m of serpentine path length. Three sets of mixtures (Agilent tune mixture, tetraalkylammonium salts, and 8 peptide mixture) and four traveling waveform profiles (square, sine, triangle, and sawtooth) were used. The sawtooth TW profile produced a slightly higher resolving power for the Agilent tuning mixture and tetraalkylammonium ions. The average resolving power for Agilent tune mixture ions ranged from 37 (using sawtooth TW) to 27 (using square TW). For tetraalkylammonium ions, the average resolving powers ranged from 45 (sawtooth TW) to 31 (square TW). For the peptide mixture ions, the resolving power was similar among the four TW profiles and ranged from 51 to 56. The average percent error in TW CCS for the peptide mixture ions ranged was about 0.4%. In conclusion, the new device showed promising results for a device made of a flexible printed circuit board material, but improvements are needed to further increase the resolving power.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Strategies to Obtain Reliable Energy Landscapes from Embedded Multireference Correlated Wavefunction Methods for Surface Reactions

Embedded correlated wavefunction (ECW) theory is a powerful tool for studying ground- and excited-state reaction mechanisms and associated energetics in heterogeneous catalysis. Several factors are important to obtaining reliable ECW energies, critically the construction of consistent active spaces (ASs) along reaction pathways when using a multireference correlated wavefunction (CW) method that relies on a subset of orbital spaces in the configuration interaction expansion to account for static electron correlation, e.g., complete AS self-consistent field theory, in addition to the adequate partitioning of the system into a cluster and environment, as well as the choice of a suitable basis set and number of states included in excited-state simulations. Here, in this work, we conducted a series of systematic studies to develop best-practice guidelines for ground- and excited-state ECW theory simulations, utilizing the decomposition of NH 3 on Pd(111) as an example. We determine that ECW theory results are relatively insensitive to cluster size, the aug-cc-pVDZ basis set provides an adequate compromise between computational complexity and accuracy, and that a fixed-clean-surface approximation holds well for the derivation of the embedding potential. Additionally, we demonstrate that a merging approach, which involves generating ASs from the molecular fragments at each configuration, is preferable to a creeping approach, which utilizes ASs from adjacent structures as an initial guess, for the generation of consistent potential energy curves involving open-d-shell metal surfaces, and, finally, we show that it is essential to include bands of excited states in their entirety when simulating excited-state reaction pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Deciphering the influence of high-flux helium plasma exposure on tungsten nanostructure growth using real-time, in situ spectroscopic ellipsometry

In situ analysis of surfaces during high-flux plasma exposure represents a long-standing challenge in the study of plasma–material interactions. While post-mortem microscopy can provide a detailed picture of structural and compositional changes, in situ techniques can capture the dynamic evolution of the surface. In this study, we demonstrate how spectroscopic ellipsometry can be applied to the real-time characterization of W nanostructure (also known as “fuzz”) growth during exposure to low temperature, high-flux He plasmas. Strikingly, over a wide range of sample temperatures and helium fluences, the measured ellipsometric parameters (Ψ,Δ) collapse onto a single curve that can be directly correlated with surface morphologies characterized by ex situ helium ion microscopy. The initial variation in the (Ψ,Δ) parameters appears to be governed by small changes in surface roughness (<50 nm) produced by helium bubble nucleation and growth, followed by the emergence of 50 nm diameter W tendrils. This basic behavior appears to be reproducible over a wide parameter space, indicating that the spectroscopic ellipsometry may be of general practical use as a diagnostic to study surface morphologies produced by high-flux He implantation in refractory metals. An advantage of the methods outlined here is that they are applicable at low incident ion energies, even below the sputtering threshold. As an example of this application, we apply in situ ellipsometry to examine how W fuzz growth is affected both by varying ion energy and the temperature of the surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Self-Assembly and Phase Separation for Transport: A brief argument for the continued exploration of liquid crystal flows and electrodeposition in micro-gravity

Phase separation, interfacial tension gradients, and molecular self-assembly are all phenomena frequently observed when manipulating soft condensed matter systems on Earth. Depending on the system these processes can also be quite predictable. For instance, on Earth water droplets placed on hydrophobic surfaces will have contact angles > 90° with limited spread, contrary to their wetting behavior on hydrophilic surfaces. However, in an environment that is in a constant state of free-fall, where the gravitational field is reduced by 10%, such as on the International Space Station (ISS), buoyancy and its effect on fluid convection also become negligible. Fluid flow and phase behavior become less predictable. Thus, continuing the prior example, even if water droplets still remain in contact with a surface in microgravity (µg), the interface between the air and droplets will still remain significantly curved, appearing almost as if they were placed over completely nonwetting surfaces (Fig. 1a). Moreover, the negligible opposing buoyant force would also mean that if immiscible liquid droplets of a less dense character, or air bubbles even (Fig. 1b), were to be suspended within a larger water drop, these immiscible droplets or air bubbles would not migrate toward any one direction unless either artificially propelled by an external force or internal reaction inducing flow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Study of Cathode and Cavity Geometries in Electropolishing (EP): Electric Field Simulation

Niobium (Nb) superconducting radio frequency (SRF) cavities require electropolishing surface treatment to reach high acceleration gradient. EP performed in the plateau region of an I-V curve [1] leads to a smooth finish of the cavity surface including the equator surface. The equator surface is vital because a rough equator surface leads to premature quench and limit the cavity performance. Previous experimental work was performed to optimize EP parameters for low-beta (LB) 650 MHz Nb cavity [1]. It was found that different cathode surface areas vary the plateau onset voltage. A lower onset voltage was achieved for HB650 cavity with an enlarged cathode surface area. The aim of the study is to perform electrostatic and electrochemical simulation to understand the impact of both cavity geometry and cathodes. This report covers an initial result on electric field simulation performed with HB and LB 650 MHz cavities.

Loer, Bereket↗
DOE OSTI2024

Chiral Electrokinetic Phenomena in Single Nanopores

Abstract The arrangement of solvent molecules and ions at solid–liquid interfaces determines electrochemical properties that are important in separations platforms, sensing technologies, and energy‐storage systems. Here we show that single glass and polymer pores in contact with propylene carbonate (PC) solutions of LiClO 4 exhibit an effective surface potential that is modulated by the enantiomeric excess of the solvent. In particular, electrochemical and electrokinetic measurements of ionic transport through glass pipettes and polymer pores reveal that the effective surface potential is significantly lower in solutions prepared using enantiomerically pure PC than in solutions prepared using racemic PC. Both pore systems became positively charged in all racemic solutions examined in the range of LiClO 4 concentrations between 1 mM and 100 mM, whereas solutions in ( R )‐(+)‐PC induced a positive surface potential only at concentrations above ~5 mM. The effective surface potential is quantified through asymmetry in current–voltage curves and zeta‐potential measurements. Vibrational sum‐frequency‐generation experiments on LiClO 4 solutions in racemic and enantiomerically pure PC indicate that the surface lipid‐bilayer‐like region in the former is more strongly organized than in the latter, dictating the favorable positions for lithium and perchlorate ions in each case. The more ordered molecular packing in the racemic liquid leads to accumulation of lithium ions on the outside of the bilayer, creating a higher effective positive charge. Our results highlight the extreme sensitivity of the interfacial potential on molecular organization of the solvent, and the relatively unexplored role that chirality can play in electrokinetic phenomena.

Alanis, Kristen↗
DOE OSTI2020

Fractal Model for Drag Reduction on Multiscale Nonwetting Rough Surfaces

Rough surfaces in contact with a flow of fluid exhibit alternating no-slip and free shear boundary conditions at the solid–liquid and air–liquid interfaces, respectively, thereby potentially offering drag reduction benefits. The balance between the dynamic pressure in the flow and the restoring capillary pressure in the interasperity spaces determines the stability of the Cassie state of wettability and is a function of the relative extent of no-slip and free shear regions per unit surface area. In the present study, using a fractal representation of rough surface topography, an analytical model is developed to quantify the stability of the Cassie state of wettability as well as drag reduction and the friction factor for laminar flow in a rectangular channel between nonwetting multiscale rough surfaces. A systematic study is conducted to quantify the effects of fractal parameters of the surfaces and the flow Reynolds number on drag reduction and the friction factor. The studies are used to develop friction factor curves extending the classical Moody diagram to hydrophobic and superhydrophobic surfaces. On the basis of the studies, regime maps are derived for estimating the extent of drag reduction offered by hydrophobic and superhydrophobic surfaces, revealing that superhydrophobic surfaces do not always offer the best drag reduction performance. The application of the fractal model to practical topographies of nonwetting surfaces of copper, aluminum, and zinc oxide fabricated via electrodeposition and etching is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhanced electro-osmosis in propylene carbonate salt solutions

Properties of solid–liquid interfaces and surface charge characteristics mediate ionic and molecular transport through porous systems, affecting many processes such as separations. Herein, we report experiments designed to probe the electrochemical properties of solid–liquid interfaces using a model system of a single polyethylene terephthalate (PET) pore in contact with aqueous and propylene carbonate solutions of LiClO 4 . First, the existence and polarity of surface charges were inferred from current–voltage curves recorded when a pore was placed in contact with a LiClO4 concentration gradient. Second, the electro-osmotic transport of uncharged polystyrene particles through the PET pore provided information on the polarity and the magnitude of the pore walls’ zeta potential. Our experiments show that the PET pores become effectively positively charged when in contact with LiClO 4 solutions in propylene carbonate, even though in aqueous LiClO 4 , the same pores are negatively charged. Additionally, the electro-osmotic velocity of the particles revealed a significantly higher magnitude of the positive zeta potential of the pores in propylene carbonate compared to the magnitude of the negative zeta potential in water. The presented methods of probing the properties of solid–liquid interfaces are expected to be applicable to a wide variety of solid and liquid systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Bio-inspired alula-based winglet design for enhanced heat transfer in high temperature fin-and-tube heat exchangers

Fin-and-tube heat exchangers (FTHEs) are widely used for high-temperature flue-gas heat recovery, but their performance is often limited by wake regions and non-uniform fin-surface temperatures. This study proposes and numerically evaluates four bio-inspired longitudinal vortex generator (VG) configurations in a high-temperature FTHE with flue-gas inlet temperature ∼1230 K: double-delta, curved double-delta, alula, and a new curved-alula geometry. The reference fin is not hydraulically plain; it already incorporates leading-edge separation columns and convex protrusions, so the alula-type winglets are assessed as downstream add-ons acting on a strongly disturbed flow. In a second step, perforations (one, two and three circular holes) are introduced into the curved-alula VGs to further tailor the flow field. Three-dimensional simulations with the Shear Stress Transpor (SST) $k - ω$ model, temperature-dependent flue-gas properties and conjugate conduction are carried out for gas-side Reynolds numbers $Re_g ≈ 8.0$ x $10^2 - 3.6$ x $10^3$ (mass flow rates 0.5 – 2.5 g/s), and the designs are compared in terms of surface heat flux, Nusselt number, friction factor and hydrothermal performance factor (HTPF). For this already-promoted fin, the additional downstream winglets provide moderate, incremental hydrothermal gains. At the highest Reynolds number, the best non-perforated design (curved-alula) increases surface heat flux from 1630.9 to 1794.7 kW/m² (∼ 10 % gain) and the Nusselt number from 227.6 to 242.6 (∼ 7 % gain), while the friction factor rises from 0.26 to about 0.30, yielding HTPF values close to unity (∼ 0.9 – 1.0). Introducing circular perforations into the curved-alula winglets acts mainly as a wake-bleeding refinement: the three-hole configuration provides a heat flux of 1824.7 kW/m² and a pressure drop of 127.9 Pa, with HTPF in the range ∼ 1.03 – 1.14 and a small (∼ 1 – 3 %) improvement over the solid curved-alula design. Flow-field analysis shows that the perforated curved-alula VGs shrink tube-wake regions, thin the thermal boundary layer and homogenize the fin-surface temperature (outlet-gas temperature ∼ 510 – 520 K and fin-surface temperature ∼ 420 – 421 K for the three-hole case). An optimal flue-gas mass flow rate of ∼ 1 g/s ($Re_g ≈ 1.5$ x $10^3$) is identified, beyond which additional heat-transfer gains are offset by rapidly increasing pressure losses. Overall, the results highlight that initial fin geometry and VG placement are as important as VG shape: alula-based winglets are expected to yield larger relative gains on simpler flat-fin layouts or when positioned closer to the fin leading edge and tube

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Electropolishing parameters study for surface smoothening of low-$\beta$650 MHz five-cell niobium superconducting radio frequency cavity

Electropolishing (EP) is applied to niobium (Nb) superconducting radio frequency (SRF) cavities, which are used in particle accelerators for their surface treatment. The EP process for 1.3 GHz cavities has been extensively studied earlier. In this work, a parametric study on EP of low-β (0.61) 650 MHz Nb SRF cavities (LB650), which will be used in pre-production cryomodule for proton improvement plan-II (PIP-II) linear accelerator, was conducted to determine adequate EP conditions for attaining a smooth surface of the cavities. EP performed with the standard parameters and an initial cathode (cathode-I) having a cathode surface area of ~5% of the cavity surface area yielded a rough equator surface of the cavity. The grain step height on the equator weld position was measured to be ~ 32 μm. The rough surface was attributed to preferential grain etching confirmed by a polarization curve showing a linear relationship between the EP current and voltage and the absence of the current plateau region. The cathode was modified to make its surface area twice that of cathode-I. The modified cathode (cathode-M) provided a current plateau region in the corresponding I-V curves measured at different cavity temperatures. The onset voltage for the plateau was found to be higher at higher cavity temperatures. Here this study revealed that even with cathode-M, the standard 18 V was low for EP of such large-sized cavities when the cavity temperature was 18 °C. EP performed at a higher voltage of 22–24.5 V with cathode-M yielded a smooth surface with a grain step height of only 0.6 μm. The applied EP conditions also improved removal uniformity along the cavity length. In contrast to the cavity treated with cathode-I, the cavities treated with cathode-M achieved a significantly higher accelerating gradient (E acc ) in vertical tests conducted in a cryostat at 2 K. The modified EP was found efficient to produce the cavities that achieved E acc of 22.4 MV/m, required by PIP II project in the baseline RF tests, to qualify for further surface processing used to enhance their quality factors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Magnetic Solitons in Hierarchical 3D Magnetic Nanoarchitectures of Nanoflower Shape

Curvilinear magnetism emerged as a new route to tailor properties of magnetic solitons by the choice of geometry and topology of a magnetic architecture. Here, we develop an anodized aluminum oxide template-based approach to realize hierarchical 3D magnetic nanoarchitectures of nanoflower shape. The technique provides defect-free regular arrays of magnetic nanoflowers of tunable shape with a period of 400 nm over cm 2 areas. We combined advanced magnetic imaging methods with micromagnetic simulations to study complex magnetic states in nanoflowers originating due to magnetostatics-driven symmetry break in curvilinear nanomembranes. An interaction between surface and volume magnetostatic charges in 3D curved nanoflowers leads to the stabilization of asymmetric and shifted vortices as well as states with two Bloch lines. Ordered large area arrays of complex-shaped magnetic nanoarchitectures developed in this work are relevant for prospective research on 3D magnonics and spintronics.

3D nanoarchitectures↗
DOE OSTI2021

Gas-Phase Temperature Mapping of Evaporating Microdroplets

Evaporation is a ubiquitous and complex phenomenon of importance to many natural and industrial systems. Evaporation occurs when molecules near the free interface overcome intermolecular attractions with the bulk liquid. As molecules escape the liquid phase, heat is removed, causing evaporative cooling. The influence of evaporative cooling on inducing a temperature difference with the surrounding atmosphere as well as within the liquid is poorly understood. Here, we develop a technique to overcome past difficulties encountered during the study of heterogeneous droplet evaporation by coupling a piezo-driven droplet generation mechanism to a controlled micro-thermocouple to probe microdroplet evaporation. The technique allowed us to probe the gas-phase temperature distribution using a micro-thermocouple (50 μm) in the vicinity of the liquid–vapor interface with high spatial (±10 μm) and temporal (±100 ms) resolution. We experimentally map the temperature gradient formed surrounding sessile water droplets having varying curvature dictated by the apparent advancing contact angle (100° ≲ θ ≲ 165°). The experiments were carried out at temperatures below and above ambient for a range of fixed droplet radii (130 μm ≲ R ≲ 330 μm). Our results provide a primary validation of the centuries-old theoretical framework underpinning heterogeneous droplet evaporation mediated by the working fluid, substrate, and gas thermophysical properties, droplet apparent contact angle, and droplet size. We show that microscale droplets residing on low-thermal-conductivity substrates such as glass absorb up to 8× more heat from the surrounding gas compared to droplets residing on high-thermal-conductivity substrates such as copper. Finally, our work not only develops an experimental understanding of the heat transfer mechanisms governing droplet evaporation but also presents a powerful platform for the study and characterization of liquid–vapor transport at curved interfaces wetting and nonwetting advanced functional surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Stellarator coil design using cubic splines for improved access on the outboard side

In recent years many efforts have been undertaken to simplify coil designs for stellarators due to the difficulties in fabricating non-planar coils. Additionally, the FOCUS code removes the need for a winding surface and represents the coils as arbitrary curves in 3D. In the following work, the implementation of a spline representation for the coils in FOCUS is described, along with the implementation of a new engineering constraint to design coils with a straighter outer section. The new capabilities of the code are shown as an example on HSX, NCSX, and a prototype quasi-axisymmetric reactor-sized stellarator. The flexibility granted by splines along with the new constraint will allow for stellarator coil designs with improved accessibility and simplified maintenance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗