Identification of sampling intervals in sampled-data models of human operators.
Programmed search and gradient search methods for determination of sampling intervals in synthesis of sampled data models of human operators
Bekey, G. A.↗
SEARCH · Search NASA
Results for “data modeling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Role of Snowmelt and Subsurface Heterogeneity in Headwater Hydrology of a Mountainous Catchment in Colorado: A Model‐Data Integration Approach
Mountainous headwater streams are sustained by both snowmelt‐driven streamflow and groundwater discharge in the Upper Colorado River Basin. However, predicting headwater stream discharge magnitude and peak flow timing is challenging in mountainous terrains, where snowmelt rates vary with vegetation type and elevation, and heterogeneous subsurface physical properties influence groundwater storage and its release. We used a model‐data integration approach to investigate the roles of snowmelt and subsurface structure in stream discharge and groundwater level. We ran an ensemble of 100 integrated surface‐subsurface hydrologic models for a mountainous headwater catchment near Crested Butte, Colorado, USA. We also evaluated and calibrated these models against observed data sets, including snow depth measurements using distributed temperature probes, stream discharge, and groundwater levels. Calibration with multiple data sources using neural density estimators has further constrained uncertainty in subsurface properties and snowmelt rates. Results indicated that observed slower snowmelt rates in evergreen forests delayed the peak flow and baseflow onset. In upstream areas with lower subsurface permeability, water was stored within the subsurface but was not released as interflow or shallow groundwater flow, and thereby not contributing to downstream streamflow during recession limb periods. Double peaks in groundwater occurred in areas with spatial subsurface heterogeneity, in our case due to the contrast between granodiorite and Mancos shale. These process‐based insights into groundwater and snowmelt dynamics in mountainous headwaters will help improve predictions of headwater hydrology.
Wang, Lijing [University of Connecticut, Storrs, C↗
Using expert systems to implement a semantic data model of a large mass storage system
The successful development of large volume data storage systems will depend not only on the ability of the designers to store data, but on the ability to manage such data once it is in the system. The hypothesis is that mass storage data management can only be implemented successfully based on highly intelligent meta data management services. There now exists a proposed mass store system standard proposed by the IEEE that addresses many of the issues related to the storage of large volumes of data, however, the model does not consider a major technical issue, namely the high level management of stored data. However, if the model were expanded to include the semantics and pragmatics of the data domain using a Semantic Data Model (SDM) concept, the result would be data that is expressive of the Intelligent Information Fusion (IIF) concept and also organized and classified in context to its use and purpose. The results are presented of a demonstration prototype SDM implemented using the expert system development tool NEXPERT OBJECT. In the prototype, a simple instance of a SDM was created to support a hypothetical application for the Earth Observing System, Data Information System (EOSDIS). The massive amounts of data that EOSDIS will manage requires the definition and design of a powerful information management system in order to support even the most basic needs of the project. The application domain is characterized by a semantic like network that represents the data content and the relationships between the data based on user views and the more generalized domain architectural view of the information world. The data in the domain are represented by objects that define classes, types and instances of the data. In addition, data properties are selectively inherited between parent and daughter relationships in the domain. Based on the SDM a simple information system design is developed from the low level data storage media, through record management and meta data management to the user interface.
Roelofs, Larry H.↗
Evolution of the ATLAS event data model for the HL-LHC
The upcoming high-luminosity run of the CERN Large Hadron Collider (HL-LHC) will yield an unprecedented volume of data. In order to process this data, the ATLAS collaboration is evolving its offline software to be able to use heterogeneous resources such as graphical processing units (GPUs) and field-programmable gate arrays (FPGAs). To reduce conversion overheads, the event data model (EDM) should be compatible with the requirements of these resources. While the ATLAS EDM has long allowed representing data as a structure of arrays, further evolution of the EDM can enable more efficient sharing of data between CPU and GPU resources. Some of this work will be summarized here, including extensions to allow controlling how memory for event data is allocated and the implementation of jagged vectors.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Scenario driven data modelling: a method for integrating diverse sources of data and data streams
A system and method of integrating diverse sources of data and data streams is presented. The method can include selecting a scenario based on a topic, creating a multi-relational directed graph based on the scenario, identifying and converting resources in accordance with the scenario and updating the multi-directed graph based on the resources, identifying data feeds in accordance with the scenario and updating the multi-directed graph based on the data feeds, identifying analytical routines in accordance with the scenario and updating the multi-directed graph using the analytical routines and identifying data outputs in accordance with the scenario and defining queries to produce the data outputs from the multi-directed graph.
97 MATHEMATICS AND COMPUTING↗
A model-data intercomparison of CO2 exchange across North America: Results from the North American Carbon Program Site Synthesis
There is a continued need for models to improve consistency and agreement with observations [Friedlingstein et al., 2006], both overall and under more frequent extreme climatic events related to global environmental change such as drought [Trenberth et al., 2007]. Past validation studies of terrestrial biosphere models have focused only on few models and sites, typically in close proximity and primarily in forested biomes [e.g., Amthor et al., 2001; Delpierre et al., 2009; Grant et al., 2005; Hanson et al., 2004; Granier et al., 2007; Ichii et al., 2009; Ito, 2008; Siqueira et al., 2006; Zhou et al., 2008]. Furthermore, assessing model-data agreement relative to drought requires, in addition to high-quality observedCO2 exchange data, a reliable drought metric as well as a natural experiment across sites and drought conditions.
54 ENVIRONMENTAL SCIENCES↗
Data-model files associated with the manuscript titled "The Importance of Explicitly Representing the Streambed in Watershed Models" (Shuai et al., 2023 HP)
This data package contains the model inputs and outputs used in the manuscript titled "The Importance of Explicitly Representing the Streambed in Watershed Models" (Shuai et al., 2023 HP). The data.zip file contains the data used to drive the Advanced Terrestrial Simulator (ATS) model simulations. The model.zip file contains the XML input file for ATS. The notebook.zip file contains the Jupyter notebooks for pre- and post- processing model results. The figures.zip file contains the raw figures associated with the manuscript. We generated this data package in support of the manuscript and research reproducibility. The background of this study is that the streambed itself has not been explicitly represented in watershed models, although the streambed characteristics are significantly different from those of its surrounding soil. We aim to answer the following questions: 1) How do streambed properties including hydraulic conductivity, thickness and resolution impact the groundwater-surface water exchange fluxes across the streambed? 2) Is an explicit representation of streambed important in watershed modeling?; 3) Is a high-resolution streambed needed for watershed simulations?
54 ENVIRONMENTAL SCIENCES↗
An interactive environment for the analysis of large Earth observation and model data sets
Envision is an interactive environment that provides researchers in the earth sciences convenient ways to manage, browse, and visualize large observed or model data sets. Its main features are support for the netCDF and HDF file formats, an easy to use X/Motif user interface, a client-server configuration, and portability to many UNIX workstations. The Envision package also provides new ways to view and change metadata in a set of data files. It permits a scientist to conveniently and efficiently manage large data sets consisting of many data files. It also provides links to popular visualization tools so that data can be quickly browsed. Envision is a public domain package, freely available to the scientific community. Envision software (binaries and source code) and documentation can be obtained from either of these servers: ftp://vista.atmos.uiuc.edu/pub/envision/ and ftp://csrp.tamu.edu/pub/envision/. Detailed descriptions of Envision capabilities and operations can be found in the User's Guide and Reference Manuals distributed with Envision software.
Bowman, Kenneth P.↗
BIM Interoperability Tool for Improving IFC-based Model Data Exchange Between Architectural Design and Structural Analysis for Linear Piping Components
There is a growing need in the AEC industry for the digitalization of model-based data exchange in BIM workflows. However, users continue to face difficulties exchanging data between BIM-based computer-aided design (CAD) and computer-aided engineering (CAE) software, even with the open, non-proprietary data exchange format called Industry Foundation Classes (IFC). Proposed solutions in academic research focus primarily on building systems, with comparatively little attention to piping models. Therefore, this paper introduces an interoperability tool for enabling piping model data exchange between architectural and structural analysis domains. The tool is tested using a piping model created in Autodesk Revit and shows marked improvement for IFC-based CAD-to-CAE interoperability over existing practice.
97 MATHEMATICS AND COMPUTING↗
Using the NASA Giovanni DICCE Portal to Investigate Land-Ocean Linkages with Satellite and Model Data
Data-enhanced Investigations for Climate Change Education (DICCE), a NASA climate change education project, employs the NASA Giovanni data system to enable teachers to create climate-related classroom projects using selected satellite and assimilated model data. The easy-to-use DICCE Giovanni portal (DICCE-G) provides data parameters relevant to oceanic, terrestrial, and atmospheric processes. Participants will explore land-ocean linkages using the available data in the DICCE-G portal, in particular focusing on temperature, ocean biology, and precipitation variability related to El Ni?o and La Ni?a events. The demonstration includes the enhanced information for educators developed for the DICCE-G portal. The prototype DICCE Learning Environment (DICCE-LE) for classroom project development will also be demonstrated.
Acker, James G.↗
Studies and analyses of the space shuttle main engine. Failure information propagation model data base and software
The failure information propagation model (FIPM) data base was developed to store and manipulate the large amount of information anticipated for the various Space Shuttle Main Engine (SSME) FIPMs. The organization and structure of the FIPM data base is described, including a summary of the data fields and key attributes associated with each FIPM data file. The menu-driven software developed to facilitate and control the entry, modification, and listing of data base records is also discussed. The transfer of the FIPM data base and software to the NASA Marshall Space Flight Center is described. Complete listings of all of the data base definition commands and software procedures are included in the appendixes.
Tischer, A. E.↗
Utah FORGE: Roosevelt Hot Springs Analytical Well-Based Temperature Model Data
This submission contains a cumulative record of one-dimensional temperature modeling based off of well data in the vicinity of the Utah FORGE site. Temperature log data from wells used, and in some cases were extrapolated below the bottom of a number of wells. The data were corrected for elevation and location using the Utah FORGE earth model. These data locations correspond to well locations provided in GDR Submission 1111 (linked below). All data are georeferenced to UTM, zone 12N, NAD 83, NAVD 88.
15 GEOTHERMAL ENERGY↗
Next Generation Agricultural System Data, Models and Knowledge Products: Introduction
Agricultural system models have become important tools to provide predictive and assessment capability to a growing array of decision-makers in the private and public sectors. Despite ongoing research and model improvements, many of the agricultural models today are direct descendants of research investments initially made 30-40 years ago, and many of the major advances in data, information and communication technology (ICT) of the past decade have not been fully exploited. The purpose of this Special Issue of Agricultural Systems is to lay the foundation for the next generation of agricultural systems data, models and knowledge products. The Special Issue is based on a 'NextGen' study led by the Agricultural Model Intercomparison and Improvement Project (AgMIP) with support from the Bill and Melinda Gates Foundation.
Next generation↗
Machine-learning interatomic potentials for interfaces in all-solid-state batteries: Perspectives on training data, model selection, and validation
Interfaces play a pivotal role in dictating the performance and reliability of all-solid-state batteries (ASSBs), where complex electro-chemo-mechanical phenomena at grain boundaries (GBs) and interfaces can lead to degradation and failure. Traditional atomistic simulation methods, such as first-principles calculations and classical molecular dynamics, face limitations in modeling these interfaces due to either high computational cost or insufficient transferability to the diverse atomic environments evolving at interfaces. Machine-learning interatomic potentials (MLIPs) have emerged as a transformative approach, enabling large-scale, high-accuracy simulations of disordered and chemically complex systems by leveraging the predictability of machine learning models trained on first-principles data. Recent applications of MLIPs have demonstrated their ability to capture intricate behaviors at ASSB interfaces, including ion transport, interfacial evolution, and degradation mechanisms, with accuracy and efficiency unattainable by conventional methods. This prospective paper presents comprehensive analysis and practical guidance for MLIP development for GBs and interfaces in ASSBs, with a focus on three key pillars: data generation, model selection, and validation. Here, we review the current state of MLIP applications for GBs and interfaces in both general and ASSB-specific materials, highlighting best practices and challenges in constructing diverse and representative datasets, choosing appropriate machine learning architectures, and rigorously validating model performance. We also discuss emerging strategies and opportunities for improved reliability and efficiency of MLIPs to simulate realistic interfaces in ASSBs.
Energy - Storage↗
Modelling Z→TT processes in ATLAS with T-embedded Z →μμ data
We describe the concept, technical realisation and validation of a largely data-driven method to model events with Z→ττ decays. In Z→μμ events selected from proton-proton collision data recorded at √s=8 TeV with the ATLAS experiment at the LHC in 2012, the Z decay muons are replaced by τ leptons from simulated Z →ττ decays at the level of reconstructed tracks and calorimeter cells. The τ lepton kinematics are derived from the kinematics of the original muons. Thus, only the well-understood decays of the Z boson and τ leptons as well as the detector response to the τ decay products are obtained from simulation. All other aspects of the event, such as the Z boson and jet kinematics as well as effects from multiple interactions, are given by the actual data. This so-called τ-embedding method is particularly relevant for Higgs boson searches and analyses in ττ final states, where Z→ττ decays constitute a large irreducible background that cannot be obtained directly from data control samples. In this paper, we discuss the relevant concepts based on the implementation used in the ATLAS Standard Model H→ττ analysis of the full datataset recorded during 2011 and 2012.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Single-Stream Empirical Jet Noise Models Based on Scale-Model Data
Accurate single-stream jet-noise models for hot jets in flight are necessary for predicting noise of future commercial supersonic aircraft at takeoff. Previous comparisons between flight data and existing models have shown unacceptably large errors in the predictive tools. In the current effort, acoustic data were acquired in the Aero-Acoustic Propulsion Laboratory at the NASA Glenn Research Center for a single-stream hot jet with a range of operating conditions and simulated flight speeds that include those expected at takeoff of commercial supersonic aircraft. Models are presented for the resulting shape functions used to estimate the average spectra derived from the appropriate scaling of the jet-noise data.
Acoustics↗
Single-Stream Empirical Jet-Noise Models Based on Scale-Model Data
Accurate single-stream jet-noise models for hot jets in flight are necessary for predicting noise of future commercial supersonic aircraft at takeoff. Previous comparisons between flight data and existing models have shown unacceptably large errors in the predictive tools. In the current effort, acoustic data were acquired in the Aero-Acoustic Propulsion Laboratory at the NASA Glenn Research Center for a single-stream hot jet with a range of operating conditions and simulated flight speeds that include those expected at takeoff of commercial supersonic aircraft. Models are presented for the resulting shape functions used to estimate the average spectra derived from the appropriate scaling of the jet-noise data.
Acoustics↗
VR Lab ISS Graphics Models Data Package
All the ISS models are saved in AC3D model format which is a text based format that can be loaded into blender and exported to other formats from there including FBX. The models are saved in two different levels of detail, one being labeled "LOWRES" and the other labeled "HIRES". There are two ".str" files (HIRES _ scene _ load.str and LOWRES _ scene _ load.str) that give the hierarchical relationship of the different nodes and the models associated with each node for both the "HIRES" and "LOWRES" model sets. All the images used for texturing are stored in Windows ".bmp" format for easy importing.
Paddock, Eddie↗