Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Mechanochemical topological defects in an active nematic

We propose a reaction-diffusion system that converts topological information of an active nematic into chemical signals. We show that a curvature-activated reaction dipole is sufficient for creating a system that dynamically senses topology by producing a concentration field possessing local extrema coinciding with ±$\frac{1}{2}$ defects. The enabling term is analogous to polarization charge density seen in dielectric materials. We demonstrate the ability of this system to identify defects in both passive and active nematics. Our results illustrate that a relatively simple feedback scheme, expressed as a system of partial differential equations, is capable of producing chemical signals in response to inherently nonlocal structures in anisotropic media. Here, we posit that such coarse-grained systems can help generate testable hypotheses for regulated processes in biological systems, such as morphogenesis, and motivate the creation of bio-inspired materials that utilize dynamic coupling between nematic structure and biochemistry.

42 ENGINEERING↗
DOE OSTI2026

Point defect energetics in gallium arsenide, a comprehensive density functional theory study

In materials, point defects often control or modify functional properties. To predict the performance of materials intended for application in optoelectronic devices, it is imperative to understand the properties of those point defects. For the first time, all six intrinsic defects of GaAs, a key optoelectronics material, and their charge transition levels are calculated using density functional theory with the HSE06 functional. For comparison, both PBE and r 2 SCAN calculations are also carried out. The HSE06 results are found to be in better agreement with experimental data than previous calculations. In conclusion, the importance of using the exact electron exchange present in hybrid functionals and larger supercells to accurately determine defect levels and ground state defect configurations is demonstrated.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dislocation half-loop control for optimal V-defect density in GaN-based light emitting diodes

V-defects are morphological defects that typically form on threading dislocations during epitaxial growth of $(0001)$-oriented GaN layers. A V-defect is a hexagonal pyramid-shaped depression with six {$10\bar{1}1$}-oriented sidewalls. These semipolar sidewalls have a lower polarization barrier than the polarization barriers present between the polar c-plane quantum wells and quantum barriers and can laterally inject carriers directly into quantum wells in GaN-based light emitting diodes (LEDs). This is especially important, as the high polarization field in c-plane GaN is a significant factor in the high forward voltage of GaN LEDs. The optimal V-defect density for efficient lateral carrier injection in a GaN LED (∼10 9 cm −2 ) is typically an order of magnitude higher than the threading dislocation density of GaN grown on patterned sapphire substrates (∼10 8 cm −2 ). Pure-edge dislocation loops have been known to exist in GaN, and their formation into large V-defects via low-temperature growth with high Si-doping has recently been studied. Here, in this work, we develop a method for pure-edge threading dislocation half-loop formation and density control via disilane flow, growth temperature, and thickness of the half-loop generation layer. We also develop a method of forming the threading dislocation half-loops into V-defects of comparable size to those originating from substrate threading dislocations.

Crystallographic defects↗
DOE OSTI2024

Investigation of Defect Physics for Efficient, Durable and Ubiquitous Perovskite Solar Modules (Final Technical Report)

Organometal halide perovskite solar cells have experienced eye-catching improvements in its recent few years. It serves as one of the most promising candidates to replace the currently widely used silicon-based solar modules. To implement its final step to the real application, functional longevity becomes the dernier continent to conquer. As a polycrystalline material, defect plays critical role in the efficiency and stability of the perovskite solar cells. Thus, the investigation of the defect physics of the perovskite layer is indispensable in this research field. However, hard evidence and a consensus are still lacking in terms of the specific nature of the defects and their effects on performance and hysteresis, and perhaps even more importantly, there is absence of fundamental understanding of the correlations between the defects and long-term operational stability of the device. A more fundamental understanding of the nature of defects in perovskite materials is of paramount importance to progress their efficiency and durability. In this work we propose in-depth studies of correlations of defects with performance and stability of perovskite solar cells. Our project aimed 1) to investigate the defects physics in perovskite solar cells, and 2) to develop a comprehensive understanding and physical model of defects and its influence on performance and stability of perovskite solar cells. With the support from program manager, Peter Lobaccaro, and the Solar Energy Technologies Office of U.S. Department of Energy, the project ends with impact achievements. Our research results have systematically provided strategies to analyze the influences of constructive molecular configurations to the charged defects in the perovskite lattices and developed in-depth understanding of chemical additive approach to improve the perovskite solar cell performance and stability. As history has shown us, control over defect properties of semiconductor materials is the key to achieving high performance and low cost devices. Therefore, the potential impact of unlocking the understanding and manipulation of defects in perovskites is great, enabling this technology to realize SETO goals. The research project is highly productive with 18 published papers in three years in top-level journals such as Science, Nature, Nature Materials, Nature Communications, Journal of American Chemistry Society, Joule, Advanced Materials, and Nano Letters. These works have drawn great attention nationwide with notable total citations over 700 times from 2020 to 2022.

14 SOLAR ENERGY↗
DOE OSTI2026

Revealing the Hidden Third Dimension of Point Defects in Two-Dimensional MXenes

Point defects govern many important functional properties of two-dimensional (2D) materials. However, resolving the three-dimensional (3D) arrangement of these defects in multi-layer 2D materials remains a fundamental challenge, hindering rational defect engineering. Here, we overcome this limitation using an artificial intelligence-guided electron microscopy workflow to map the 3D topology and clustering of atomic vacancies in Ti3C2TX MXene. Our approach reconstructs the 3D coordinates of vacancies across hundreds of thousands of lattice sites, generating robust statistical insight into their distribution that can be correlated with specific synthesis pathways. This large-scale data enables us to classify a hierarchy of defect structures-from isolated vacancies to nanopores-revealing their preferred formation and interaction mechanisms, as corroborated by molecular dynamics simulations. This work provides a generalizable framework for understanding and ultimately controlling point defects across large volumes, paving the way for the rational design of defect-engineered functional 2D materials.

2D materials↗
NASA NTRS1992

A set-associative, fault-tolerant cache design

The design of a defect-tolerant control circuit for a set-associative cache memory is presented. The circuit maintains the stack ordering necessary for implementing the Least Recently Used (LRU) replacement algorithm. A discussion of programming techniques for bypassing defective blocks is included.

Lamet, Dan↗
DOE OSTI2025

Near-Infrared Emission from Sulfur Heteroatom Defects in Single-Walled Carbon Nanotubes

Quantum defects introduced into single-walled carbon nanotubes (SWCNTs) that support near-infrared emission are promising candidates for many applications. Here, we present a type of quantum defect in which sulfur atoms are incorporated into the crystal lattice of SWCNTs through their reactions with a mild reducing agent, sodium dithionite. When radical anions generated by sodium dithionites react with (6,5)-SWCNTs, two new emission features emerge at 1120 and 1250 nm. Comparing these spectral features with density functional theory calculation results, we attribute them to defects with episulfide or thioether structures. Here, by investigating the influences of reaction conditions including reactant concentration, light irradiation, and solvent type, we identify the reaction mechanism between SWCNTs and sodium dithionite and achieve good control over defect densities. Due to the intrinsic reactivity of sulfur species, the sulfur-containing quantum defects discovered here may facilitate the introduction of more complex and functionally diverse moieties into SWCNTs.

Anions↗
DOE OSTI2020

Ultrahigh capacitive energy density in ion-bombarded relaxor ferroelectric films

Dielectric capacitors can store and release electric energy at ultrafast rates and are extensively studied for applications in electronics and electric power systems. Among various candidates, thin films based on relaxor ferroelectrics, a special kind of ferroelectric with nanometer-sized domains, have attracted special attention because of their high energy densities and efficiencies. We show that high-energy ion bombardment improves the energy storage performance of relaxor ferroelectric thin films. Intrinsic point defects created by ion bombardment reduce leakage, delay low-field polarization saturation, enhance high-field polarizability, and improve breakdown strength. We demonstrate energy storage densities as high as ~133 joules per cubic centimeter with efficiencies exceeding 75%. Deterministic control of defects by means of postsynthesis processing methods such as ion bombardment can be used to overcome the trade-off between high polarizability and breakdown strength.

Kim, Jieun↗
DOE OSTI2020

Quantification of defects engineered in single layer MoS 2

Atomic defects are controllably introduced in suspended single layer molybdenum disulfide (1L MoS 2 ) using helium ion beam. Vacancies exhibit one missing atom of molybdenum and a few atoms of sulfur. Quantification was done using a Scanning Transmission Electron Microscope (STEM) with an annular detector. Experimentally accessible inter-defect distance was employed to measure the degree of crystallinity in 1L MoS 2 . A correlation between the appearance of an acoustic phonon mode in the Raman spectra and the inter-defect distance was established, which introduces a new methodology for quantifying defects in two-dimensional materials such as MoS 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Microwave-photonic control of optically accessible spin defects in diamond

A growing variety of optically accessible spin qubits have emerged in recent years as key components for quantum sensors, computers, and memories. However, the scalability of conventional spin-based quantum architectures remains limited by direct microwave delivery, which introduces thermal noise, electromagnetic crosstalk, and design constraints for cryogenic, high-field, and distributed systems. In this work, we present a unified framework for RF-over-fiber (RFoF) control of spins accessible through optically detected magnetic resonance (ODMR) spectroscopy of nitrogen-vacancy (NV) centers in diamond. The RFoF platform relies on an intensity-modulated 1310 nm laser carrying microwave signals over fiber and a high-speed photodiode for optical-to-electrical conversion to drive NV spin transitions. We report an RFoF power-conversion efficiency of 3.42% for an RF output PRF,out=-5.5 dBm at 2.87 GHz, enabling clear resolution of Zeeman splitting in

Rahman, M Reefaz [ORNL] (ORCID:0000000323541611)↗
NASA NTRS1991

Probability of brittle failure

A methodology was developed for collecting statistically representative data for crack initiation and arrest from small number of test specimens. An epoxy (based on bisphenol A diglycidyl ether and polyglycol extended diglycyl ether and cured with diethylene triamine) is selected as a model material. A compact tension specimen with displacement controlled loading is used to observe multiple crack initiation and arrests. The energy release rate at crack initiation is significantly higher than that at a crack arrest, as has been observed elsewhere. The difference between these energy release rates is found to depend on specimen size (scale effect), and is quantitatively related to the fracture surface morphology. The scale effect, similar to that in statistical strength theory, is usually attributed to the statistics of defects which control the fracture process. Triangular shaped ripples (deltoids) are formed on the fracture surface during the slow subcritical crack growth, prior to the smooth mirror-like surface characteristic of fast cracks. The deltoids are complementary on the two crack faces which excludes any inelastic deformation from consideration. Presence of defects is also suggested by the observed scale effect. However, there are no defects at the deltoid apexes detectable down to the 0.1 micron level.

Kim, A.↗
DOE OSTI2024

An experimental process parameter study on the identification of defects in additively fabricated Al6061 with laser powder bed fusion

Additively fabricated metal parts using laser powder bed fusion (L-PBF) possess sophisticated morphology due to the recurrent use of laser-induced metal powder melting and solidification. The surface and 3D morphology of these parts often include defects in the form of protrusions, depressions, pores, voids, keyholes, or cracks that are known to be influenced by laser scanning paths and layer-to-layer processing. Such inconsistent part quality hampers the extensive adoption of L-PBF. Pores and cracks are detrimental to the fatigue life of the parts and components. Quantifying and controlling part defects and optimizing processing and scanning strategy parameters adaptively in real-time through in situ monitoring systems are highly desired. This study investigates the optimization of experimental process parameters (power, scan velocity, and hatch spacing) and their effects on the cracking and porosity of Al6061 alloy using machine learning techniques. Multi-objective optimization is formulated and conducted to determine the L-PBF parameters that minimize both porosity and crack densities.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The role of defects and solid/liquid interfacial interactions on controlling anisotropic growth of novel two-dimensional materials

Atomic-scale understanding about how interfacial properties are modified in the presence of defects and how they are correlated to the properties of nucleation and growth is critical for controlled materials growth on solid/liquid interfaces. The goal of this proposal is to establish preliminary data on the critical role of surface defects and chemical compositions of solvent on the structure, dynamics, reactivity, and free energetics at graphene/ionic liquid (IL) interfaces and their impact on two-dimensional (2D) growth of transition metal oxides on the surface. This study aims to develop generalized physical/chemical principles for directional growth at solid/liquid interfaces to achieve atomic-level control of two-dimensional materials synthesis. The proposed study of the effects of surface defects on the interfacial structure and reactivity will improve our understanding of the critical roles of heterogeneity, disorder, and solvents on 2D materials synthesis and lead to better control of directional growth of materials at solid/liquid interfaces.

36 MATERIALS SCIENCE↗
NASA NTRS1992

An energy analysis of crack-initiation and arrest in epoxy

The objective of this work is to study fracture processes such as crack initiation and arrest in epoxy. A compact tension specimen with displacement-controlled loading is employed to observe multiple crack initiations and arrests. The energy release rate at crack initiation is significantly higher than that at crack arrest, as has been observed elsewhere. In this study, the difference between these energy release rates is found to depend on specimen size (scale effect), and is quantitatively related to the fracture surface morphology. The scale effect, similar to that in strength theory, is conventionally attributed to the statistics of defects which control the fracture process. Triangular shaped ripples, deltoids, are formed on the fracture surface of the epoxy during the slow sub-critical crack growth, prior to the smooth mirrorlike surface characteristic of fast cracks. The deltoids are complimentary on the two crack faces which excludes any inelastic deformation from consideration. The deltoids are analogous to the ripples created on a river surface downstream from a small obstacle. However, in spite of the expectation based on this analogy and the observed scale effect, there are no 'defects' at the apex of the deltoids detectable down to the 0.1 micron level. This suggests that the formation of deltoids during the slow process of subcritical crack growth is an intrinsic feature of the fracture process itself, triggered by inhomogeneity of material on a submicron scale. This inhomogeneity may be related to a fluctuation in the cross-link density of the epoxy.

Chudnovsky, A.↗
DOE OSTI2022

Nanoscale Mapping and Defect-Assisted Manipulation of Surface Plasmon Resonances in 2D Bi 2 Te 3 /Sb 2 Te 3 In-Plane Heterostructures

Here, the Bi 2 Te 3 /Sb 2 Te 3 in-plane heterostructure is reported as a low-dimensional tunable chalcogenide well suited as plasmonic building block for the visible-UV spectral range. Electron-driven plasmon excitations of low-dimensional Bi 2 Te 3 /Sb 2 Te 3 are investigated by monochromated electron energy loss spectroscopy spectrum imaging. To resolve the nanoscale spatial distribution of various local plasmonic resonances, singular value decomposition is used to disentangle the spectral data and identify the individual spectral contributions of various corner, edge, and face modes. Furthermore, defect-plasmon interactions are investigated both for nanoscale intrinsic and thermally induced extrinsic polygonal defects (in situ sublimation). Signature of defect-induced red shift ranging from a several hundreds of millielectronvolts to a few electronvolts, broadening of various plasmon response, together with selective enhancement and significant variations in their intensity are detected. This study highlights the presence of a heterointerface and identifies defects as physical tuning pathways to modulate the plasmonic response over a broad spectral range. Finally, the experimental observations are compared qualitatively and validated with numerical simulations using the electron-driven discrete dipole approximation. Low-dimensional Bi 2 Te 3 /Sb 2 Te 3 as a less explored plasmonic system holds great promises as emerging platform for integrated plasmonics. Furthermore, introducing controlled structural defects can open the door for nanoengineering of plasmonic properties in such systems.

36 MATERIALS SCIENCE↗
NASA NTRS2026

Smart Process Planning for Automated Fiber Placement

Many industries, including aerospace, automotive, wind energy, maritime, and sporting goods, rely on strong, lightweight materials called composites. These materials are made by layering fibers, which can come in the form of narrow strips or wider sheets, and setting them in a polymer matrix. One of the most advanced ways to make these parts is through automated fiber placement, where a machine lays down the fibers in precise patterns. This method can create very efficient and strong designs, but it is complex, expensive, and often depends heavily on the experience of skilled engineers. Today, the design, manufacturing, and inspection stages of composite production are usually handled separately. This separation means that important information, such as how a part will be built or what defects might occur, is not always shared between stages. As a result, parts may not be as lightweight, strong, or defect-free as possible, and the process can take longer and cost more. This research develops a smart process planning system that connects design, manufacturing, and inspection into one continuous process. Built as software that works with existing tools, the system can automatically plan how the fibers are placed, predicting and reducing defects while improving both manufacturability and strength. The system optimizes not only individual layers but also how defects are distributed across all layers, preventing them from stacking up in ways that weaken the final part. It also uses inspection results from completed parts to improve future designs, creating a feedback loop where each stage informs the others. The system was tested by designing a composite panel using this new approach and comparing it to a panel made with state-of-the-art manual planning methods. The results showed that the system could intentionally control where defects appeared and increase the efficiency of the planning process. By unifying design, manufacturing, and inspection, this research shows a way to make advanced composite manufacturing more efficient, consistent, and cost-effective. This approach lowers the barrier to using automated fiber placement and opens the door for its wider adoption not only in aerospace but also in industries such as automotive, wind energy, maritime, and sporting goods, where strong and lightweight structures are essential.

Computer-Aided Process Planning↗
DOE OSTI2024

Quadrupling the depairing current density in the iron-based superconductor SmFeAsO1–xHx

Abstract Iron-based 1111-type superconductors display high critical temperatures and relatively high critical current densities J c . The typical approach to increasing J c is to introduce defects to control dissipative vortex motion. However, when optimized, this approach is theoretically predicted to be limited to achieving a maximum J c of only ∼30% of the depairing current density J d , which depends on the coherence length and the penetration depth. Here we dramatically boost J c in SmFeAsO 1– x H x films using a thermodynamic approach aimed at increasing J d and incorporating vortex pinning centres. Specifically, we reduce the penetration depth, coherence length and critical field anisotropy by increasing the carrier density through high electron doping using H substitution. Remarkably, the quadrupled J d reaches 415 MA cm –2 , a value comparable to cuprates. Finally, by introducing defects using proton irradiation, we obtain high J c values in fields up to 25 T. We apply this method to other iron-based superconductors and achieve a similar enhancement of current densities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗